From mboxrd@z Thu Jan 1 00:00:00 1970 From: Erik Tews Subject: Problem sendig IBM Thinkpad T41p to ram Date: Wed, 04 Aug 2004 00:11:16 +0200 Sender: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Message-ID: <1091571076.4077.8.camel@localhost.localdomain> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: Errors-To: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: Acpi Devel List-Id: linux-acpi@vger.kernel.org Hi I would like to suspend my t41p to ram using acpi. But everytime my system resumes I just got a blank LCD with backlight activated but no data on it, no matter if I suspend on console or X. Has somebody got an idea what this problem could be? I tried with and without framebuffer too, with 2.6.7 vanilla and 2.6.8-rc2 with current acpi-patch. I have to unload ehci-hcd first, before I was able to send this system to ram. The system is still active after resume, I just cannot use it because I got no picture on my lcd. But I can still enter commands on the keyboard like ctrl-alt-del or reboot. ------------------------------------------------------- This SF.Net email is sponsored by OSTG. Have you noticed the changes on Linux.com, ITManagersJournal and NewsForge in the past few weeks? Now, one more big change to announce. We are now OSTG- Open Source Technology Group. Come see the changes on the new OSTG site. www.ostg.com