From mboxrd@z Thu Jan 1 00:00:00 1970 From: Matthew Garrett Subject: Re: nc4010 resume failure (was: ACPI S3 resume only reboots) Date: Mon, 18 Oct 2004 21:42:27 +0100 Sender: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Message-ID: <1098132147.4032.5.camel@tyrosine> References: <20041004133340.76ba05ba.albeclemit@yahoo.it> <20041009130628.GA21781@elf.ucw.cz> <20041010105635.GA3362@doc.ic.ac.uk> <20041012175810.2920edf2.albeclemit@yahoo.it> <20041017193623.GB7476@elf.ucw.cz> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20041017193623.GB7476-I/5MKhXcvmPrBKCeMvbIDA@public.gmane.org> Errors-To: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Id: linux-acpi@vger.kernel.org On Sun, 2004-10-17 at 21:36 +0200, Pavel Machek wrote: > ENTRY(wakeup_start) > @@ -20,6 +35,7 @@ > wakeup_code_start = . > .code16 > > + BEEP > movw $0xb800, %ax > movw %ax,%fs > movw $0x0e00 + 'L', %fs:(0x10) I've been trying this on an HP nc4010. As far as I can tell, the code never even gets this far. The machine appears to suspend correctly - the sleep light flashes. Pressing the power button then causes the fan to switch on, but no beep is produced. This is with the gdt and virt_to_phys patches applied. What's the best way to proceed with debugging this? -- Matthew Garrett ------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl