From mboxrd@z Thu Jan 1 00:00:00 1970 From: Matthew Garrett Subject: Re: [PATCH] GDT table patch for resume only reboots problem Date: Sat, 23 Oct 2004 01:34:50 +0100 Sender: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Message-ID: <1098491690.3996.7.camel@tyrosine> References: Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: Errors-To: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: Hiroshi 2 Itoh Cc: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Id: linux-acpi@vger.kernel.org On Thu, 2004-10-21 at 03:36 +0900, Hiroshi 2 Itoh wrote: > Instead, I test my machine to write a byte value on I/O port 0x3bc. This > is the parallel port's output register to be latched and observable if you > have a simple hardware decoder with 7 segment LEDs. <- do it yourself work > is required. :-) I've tried this now - again, there's no sign whatsoever of anything in wakeup_code being run. I'm going to start looking into where it's being located, and see if that seems to make any difference. What reasons could there be for wakeup_code never being run? -- Matthew Garrett | mjg59-1xO5oi07KQx4cg9Nei1l7Q@public.gmane.org ------------------------------------------------------- This SF.net email is sponsored by: IT Product Guide on ITManagersJournal Use IT products in your business? Tell us what you think of them. Give us Your Opinions, Get Free ThinkGeek Gift Certificates! Click to find out more http://productguide.itmanagersjournal.com/guidepromo.tmpl