From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bjorn Helgaas Subject: Re: [PATCH] add "pnpacpi=off", print info during discovery Date: Fri, 14 Jan 2005 11:28:26 -0700 Message-ID: <1105727306.7034.18.camel@eeyore> References: <1105489541.31942.81.camel@eeyore> <1105491763.29370.5.camel@sli10-desk.sh.intel.com> <1105632437.3818.5.camel@eeyore> <20050113181333.GS6069@neo.rr.com> <1105666525.22995.9.camel@sli10-desk.sh.intel.com> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="=-43Ndiy4K5YNBK+xgUni4" Return-path: In-Reply-To: <1105666525.22995.9.camel-U5EdaLXB8smDugQYiPIPGdh3ngVCH38I@public.gmane.org> Sender: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Errors-To: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: Li Shaohua Cc: Adam Belay , ACPI-DEV List-Id: linux-acpi@vger.kernel.org --=-43Ndiy4K5YNBK+xgUni4 Content-Type: text/plain Content-Transfer-Encoding: 7bit On Fri, 2005-01-14 at 09:35 +0800, Li Shaohua wrote: > On Fri, 2005-01-14 at 02:13, Adam Belay wrote: > > Could you send me a copy of your patch. I'm curious. > We have a case (PNPACPI breaks ES7000 system). We want blacklist PNPACPI > in the arch. My patch doesn't do blacklist now, so I didn't send it out. Yeah, I have gotten several reports of problems that go away when turning off PNPACPI. They came to me because they also go away when using "pci=routeirq". For example, I have a report of the keyboard on an IBM T41 that doesn't work unless you either use "pci=routeirq" or set CONFIG_PNPACPI=n. In the attached dmesg logs, I can't see anything different related to keyboard. But it is interesting that PNPACPI makes parport interrupt-driven (IRQ 7) rather than polling, and somehow "pci=routeirq" makes a difference. --=-43Ndiy4K5YNBK+xgUni4 Content-Disposition: attachment; filename=dmesg Content-Type: text/plain; name=dmesg; charset=us-ascii Content-Transfer-Encoding: 7bit Linux version 2.6.10 (js@ares) (gcc version 3.3.4 (Debian 1:3.3.4-13)) #1 Sat Dec 25 14:40:03 CET 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff60000 (usable) BIOS-e820: 000000001ff60000 - 000000001ff78000 (ACPI data) BIOS-e820: 000000001ff78000 - 000000001ff7a000 (ACPI NVS) BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) 511MB LOWMEM available. DMI present. Built 1 zonelists Kernel command line: BOOT_IMAGE=Linux(2.6.10) ro root=303 Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 1694.794 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 514516k/523648k available (2414k kernel code, 8648k reserved, 997k data, 136k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) M processor 1700MHz stepping 05 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. tbxface-0118 [02] acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:........................................................................................................................................................................................................................................................................................................................................................................................................ Table [DSDT](id F005) - 1317 Objects with 63 Devices 392 Methods 20 Regions Parsing all Control Methods:. Table [SSDT](id F003) - 1 Objects with 0 Devices 1 Methods 0 Regions ACPI Namespace successfully loaded at root c048e560 ACPI: setting ELCR to 0200 (from 0800) evxfevnt-0094 [03] acpi_enable : Transition to ACPI mode successful NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20041105 evgpeblk-0979 [06] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 evgpeblk-0987 [06] ev_create_gpe_block : Found 8 Wake, Enabled 0 Runtime GPEs in this block ACPI: Found ECDT Completing Region/Field/Buffer/Package initialization:....................................................................................................................................................................................................................................................... Initialized 19/20 Regions 123/123 Fields 67/67 Buffers 38/46 Packages (1327 nodes) Executing all Device _STA and_INI methods:.............................................................. 62 Devices found containing: 62 _STA, 9 _INI methods ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: Embedded Controller [EC] (gpe 28) ACPI: Power Resource [PUBS] (on) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init acpi_bus-0081 [06] acpi_bus_get_device : Error getting context for object [dff4ea68] acpi_bus-0081 [06] acpi_bus_get_device : Error getting context for object [dff54768] acpi_bus-0081 [06] acpi_bus_get_device : Error getting context for object [dff59ce8] acpi_bus-0081 [06] acpi_bus_get_device : Error getting context for object [dff5c628] acpi_bus-0081 [06] acpi_bus_get_device : Error getting context for object [dff5cfe8] acpi_bus-0081 [06] acpi_bus_get_device : Error getting context for object [dff5dda8] acpi_bus-0081 [06] acpi_bus_get_device : Error getting context for object [dff5dc28] acpi_bus-0081 [06] acpi_bus_get_device : Error getting context for object [dff5d868] acpi_bus-0081 [06] acpi_bus_get_device : Error getting context for object [c14e07e8] acpi_bus-0081 [06] acpi_bus_get_device : Error getting context for object [c14e2f28] acpi_bus-0081 [06] acpi_bus_get_device : Error getting context for object [c14e2428] pnp: PnP ACPI: found 13 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas-VXdhtT5mjnY@public.gmane.org ** so I can fix the driver. Simple Boot Flag at 0x35 set to 0x1 NTFS driver 2.1.22 [Flags: R/W]. Initializing Cryptographic API ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: Processor [CPU] (supports C1 C2 C3) ACPI: Processor [CPU] (supports 8 throttling states) ACPI: Thermal Zone [THM0] (55 C) ibm_acpi: IBM ThinkPad ACPI Extras v0.8 ibm_acpi: http://ibm-acpi.sf.net/ acpi_bus-0081 [05] acpi_bus_get_device : Error getting context for object [dff59ce8] Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11 [drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies Inc Radeon R250 Lf [Radeon Mobility 9000 M9] serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 11 (level, low) -> IRQ 11 pnp: Device 00:09 activated. ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Intel(R) PRO/1000 Network Driver - version 5.5.4-k2-NAPI Copyright (c) 1999-2004 Intel Corporation. ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 11 (level, low) -> IRQ 11 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11 ICH4: chipset revision 1 ICH4: not 100%% native mode: will probe irqs later ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio hda: HTS726060M9AT00, ATA DISK drive elevator: using anticipatory as default io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: TOSHIBA DVD-ROM SD-R9012, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: Host Protected Area detected. ^Icurrent capacity is 110648690 sectors (56652 MB) ^Inative capacity is 117210240 sectors (60011 MB) hda: Host Protected Area disabled. hda: 117210240 sectors (60011 MB) w/7877KiB Cache, CHS=65535/16/63, UDMA(100) hda: hda1 hda2 hda3 hda4 hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 11 (level, low) -> IRQ 11 ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller ehci_hcd 0000:00:1d.7: irq 11, pci mem 0xc0000000 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 uhci_hcd 0000:00:1d.0: irq 11, io base 0x1800 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 uhci_hcd 0000:00:1d.1: irq 11, io base 0x1820 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 uhci_hcd 0000:00:1d.2: irq 11, io base 0x1840 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 Synaptics Touchpad, model: 1 Firmware: 5.9 Sensor: 44 new absolute packet format Touchpad has extended capability bits -> multifinger detection -> palm detection -> pass-through port input: SynPS/2 Synaptics TouchPad on isa0060/serio1 serio: Synaptics pass-through port at isa0060/serio1/input0 input: PS/2 Generic Mouse on synaptics-pt/serio0 Advanced Linux Sound Architecture Driver Version 1.0.6 (Sun Aug 15 07:17:53 2004 UTC). ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 11 (level, low) -> IRQ 11 intel8x0_measure_ac97_clock: measured 49452 usecs intel8x0: clocking to 48000 ALSA device list: #0: Intel 82801DB-ICH4 with AD1981B at 0xc0000c00, irq 11 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI wakeup devices: LID SLPB PCI0 UART PCI1 USB0 USB1 USB2 AC9M ACPI: (supports S0 S3 S4 S5) EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 136k freed kjournald starting. Commit interval 5 seconds Adding 498952k swap on /dev/hda2. Priority:-1 extents:1 EXT3 FS on hda3, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda4, internal journal EXT3-fs: mounted filesystem with ordered data mode. ACPI: Video Device [VID] (multi-head: yes rom: no post: no) parport_pc: Ignoring new-style parameters in presence of obsolete ones parport: PnPBIOS parport detected. parport0: PC-style at 0x3bc, irq 7 [PCSPP(,...)] lp0: using parport0 (interrupt-driven). c013ae51 PREEMPT Modules linked in: parport_pc lp parport video CPU: 0 EIP: 0060:[] Not tainted VLI EFLAGS: 00010012 (2.6.10) EIP is at free_block+0x41/0xd0 eax: ffffffff ebx: df7a57a0 ecx: df0cc000 edx: c14df994 esi: c14df980 edi: 00000000 ebp: dff39f04 esp: dff39eec ds: 007b es: 007b ss: 0068 Process events/0 (pid: 3, threadinfo=dff38000 task=dff0b020) Stack: c14df99c 00000005 c14dc110 c14dc110 c14dc100 00000005 dff39f1c c013b484 c14df980 c14dfb9c c14df980 dff38000 dff39f44 c013b526 c14dfb9c dff38000 00000002 c14df9f0 00000292 c048b300 dff38000 c048b304 dff39fc8 c0125ddf Call Trace: [] show_stack+0x7a/0x90 [] show_registers+0x149/0x1b0 [] die+0xdd/0x170 [] do_page_fault+0x275/0x657 [] error_code+0x2b/0x30 [] drain_array_locked+0x64/0x90 [] cache_reap+0x76/0x1b0 [] worker_thread+0x19f/0x260 [] kthread+0x99/0xa0 [] kernel_thread_helper+0x5/0x10 Code: 39 cf 7d 7e 8d 40 1c 89 45 e8 8b 45 f0 8b 15 10 b4 48 c0 8b 0c b8 8d 81 00 00 00 40 c1 e8 0c c1 e0 05 8b 5c 02 1c 8b 53 04 8b 03 <89> 50 04 89 02 8b 43 0c 31 d2 c7 03 00 01 10 00 c7 43 04 00 02 <6>note: events/0[3] exited with preempt_count 1 xfs: ignoring font path element /usr/lib/X11/fonts/CID/ (unreadable) xfs: ignoring font path element /usr/lib/X11/fonts/cyrillic/ (unreadable) xfs: ignoring font path element /var/lib/defoma/x-ttcidfont-conf.d/dirs/CID (unreadable) shutdown[1599]: shutting down for system halt Xprt_64: Xprint server pid=1495 done, exitcode=0. --=-43Ndiy4K5YNBK+xgUni4 Content-Disposition: attachment; filename=dmesg.routeirq Content-Type: text/plain; name=dmesg.routeirq; charset=us-ascii Content-Transfer-Encoding: 7bit Linux version 2.6.10 (js@ares) (gcc version 3.3.4 (Debian 1:3.3.4-13)) #1 Sat Dec 25 14:40:03 CET 2004 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff60000 (usable) BIOS-e820: 000000001ff60000 - 000000001ff78000 (ACPI data) BIOS-e820: 000000001ff78000 - 000000001ff7a000 (ACPI NVS) BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) 511MB LOWMEM available. DMI present. Built 1 zonelists Kernel command line: BOOT_IMAGE=Linux(2.6.10) ro root=303 pci=routeirq Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 1694.825 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 514516k/523648k available (2414k kernel code, 8648k reserved, 997k data, 136k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) M processor 1700MHz stepping 05 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. tbxface-0118 [02] acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:........................................................................................................................................................................................................................................................................................................................................................................................................ Table [DSDT](id F005) - 1317 Objects with 63 Devices 392 Methods 20 Regions Parsing all Control Methods:. Table [SSDT](id F003) - 1 Objects with 0 Devices 1 Methods 0 Regions ACPI Namespace successfully loaded at root c048e560 ACPI: setting ELCR to 0200 (from 0800) evxfevnt-0094 [03] acpi_enable : Transition to ACPI mode successful NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20041105 evgpeblk-0979 [06] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 evgpeblk-0987 [06] ev_create_gpe_block : Found 8 Wake, Enabled 0 Runtime GPEs in this block ACPI: Found ECDT Completing Region/Field/Buffer/Package initialization:....................................................................................................................................................................................................................................................... Initialized 19/20 Regions 123/123 Fields 67/67 Buffers 38/46 Packages (1327 nodes) Executing all Device _STA and_INI methods:.............................................................. 62 Devices found containing: 62 _STA, 9 _INI methods ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: Embedded Controller [EC] (gpe 28) ACPI: Power Resource [PUBS] (on) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init acpi_bus-0081 [06] acpi_bus_get_device : Error getting context for object [dff4ea68] acpi_bus-0081 [06] acpi_bus_get_device : Error getting context for object [dff54768] acpi_bus-0081 [06] acpi_bus_get_device : Error getting context for object [dff59ce8] acpi_bus-0081 [06] acpi_bus_get_device : Error getting context for object [dff5c628] acpi_bus-0081 [06] acpi_bus_get_device : Error getting context for object [dff5cfe8] acpi_bus-0081 [06] acpi_bus_get_device : Error getting context for object [dff5dda8] acpi_bus-0081 [06] acpi_bus_get_device : Error getting context for object [dff5dc28] acpi_bus-0081 [06] acpi_bus_get_device : Error getting context for object [dff5d868] acpi_bus-0081 [06] acpi_bus_get_device : Error getting context for object [c14e07e8] acpi_bus-0081 [06] acpi_bus_get_device : Error getting context for object [c14e2f28] acpi_bus-0081 [06] acpi_bus_get_device : Error getting context for object [c14e2428] pnp: PnP ACPI: found 13 devices SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ** Routing PCI interrupts for all devices because "pci=routeirq" ** was specified. If this was required to make a driver work, ** please email the output of "lspci" to bjorn.helgaas-VXdhtT5mjnY@public.gmane.org ** so I can fix the driver. ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:02:00.1[B] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 11 (level, low) -> IRQ 11 Simple Boot Flag at 0x35 set to 0x1 NTFS driver 2.1.22 [Flags: R/W]. Initializing Cryptographic API ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: Processor [CPU] (supports C1 C2 C3) ACPI: Processor [CPU] (supports 8 throttling states) ACPI: Thermal Zone [THM0] (61 C) ibm_acpi: IBM ThinkPad ACPI Extras v0.8 ibm_acpi: http://ibm-acpi.sf.net/ acpi_bus-0081 [05] acpi_bus_get_device : Error getting context for object [dff59ce8] Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11 [drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies Inc Radeon R250 Lf [Radeon Mobility 9000 M9] serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 11 (level, low) -> IRQ 11 pnp: Device 00:09 activated. ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Intel(R) PRO/1000 Network Driver - version 5.5.4-k2-NAPI Copyright (c) 1999-2004 Intel Corporation. ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 11 (level, low) -> IRQ 11 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11 ICH4: chipset revision 1 ICH4: not 100%% native mode: will probe irqs later ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio hda: HTS726060M9AT00, ATA DISK drive elevator: using anticipatory as default io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: TOSHIBA DVD-ROM SD-R9012, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: Host Protected Area detected. ^Icurrent capacity is 110648690 sectors (56652 MB) ^Inative capacity is 117210240 sectors (60011 MB) hda: Host Protected Area disabled. hda: 117210240 sectors (60011 MB) w/7877KiB Cache, CHS=65535/16/63, UDMA(100) hda: hda1 hda2 hda3 hda4 hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 11 (level, low) -> IRQ 11 ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller ehci_hcd 0000:00:1d.7: irq 11, pci mem 0xc0000000 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 uhci_hcd 0000:00:1d.0: irq 11, io base 0x1800 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 uhci_hcd 0000:00:1d.1: irq 11, io base 0x1820 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 uhci_hcd 0000:00:1d.2: irq 11, io base 0x1840 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 Synaptics Touchpad, model: 1 Firmware: 5.9 Sensor: 44 new absolute packet format Touchpad has extended capability bits -> multifinger detection -> palm detection -> pass-through port input: SynPS/2 Synaptics TouchPad on isa0060/serio1 serio: Synaptics pass-through port at isa0060/serio1/input0 input: PS/2 Generic Mouse on synaptics-pt/serio0 Advanced Linux Sound Architecture Driver Version 1.0.6 (Sun Aug 15 07:17:53 2004 UTC). ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 11 (level, low) -> IRQ 11 intel8x0_measure_ac97_clock: measured 49459 usecs intel8x0: clocking to 48000 ALSA device list: #0: Intel 82801DB-ICH4 with AD1981B at 0xc0000c00, irq 11 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI wakeup devices: LID SLPB PCI0 UART PCI1 USB0 USB1 USB2 AC9M ACPI: (supports S0 S3 S4 S5) EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 136k freed kjournald starting. Commit interval 5 seconds Adding 498952k swap on /dev/hda2. Priority:-1 extents:1 EXT3 FS on hda3, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda4, internal journal EXT3-fs: mounted filesystem with ordered data mode. ACPI: Video Device [VID] (multi-head: yes rom: no post: no) parport_pc: Ignoring new-style parameters in presence of obsolete ones parport: PnPBIOS parport detected. parport0: PC-style at 0x3bc, irq 7 [PCSPP(,...)] lp0: using parport0 (interrupt-driven). xfs: ignoring font path element /usr/lib/X11/fonts/CID/ (unreadable) xfs: ignoring font path element /usr/lib/X11/fonts/cyrillic/ (unreadable) xfs: ignoring font path element /var/lib/defoma/x-ttcidfont-conf.d/dirs/CID (unreadable) --=-43Ndiy4K5YNBK+xgUni4 Content-Disposition: attachment; filename=dmesg.nopnpacpi Content-Type: text/plain; name=dmesg.nopnpacpi; charset=us-ascii Content-Transfer-Encoding: 7bit Linux version 2.6.10 (js@ares) (gcc version 3.3.5 (Debian 1:3.3.5-5)) #2 Sat Jan 8 14:29:13 CET 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001ff60000 (usable) BIOS-e820: 000000001ff60000 - 000000001ff78000 (ACPI data) BIOS-e820: 000000001ff78000 - 000000001ff7a000 (ACPI NVS) BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) 511MB LOWMEM available. DMI present. Built 1 zonelists Kernel command line: BOOT_IMAGE=Linux(2.6.10) ro root=303 Initializing CPU#0 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 1694.739 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 514524k/523648k available (2410k kernel code, 8640k reserved, 996k data, 136k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) M processor 1700MHz stepping 05 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. tbxface-0118 [02] acpi_load_tables : ACPI Tables successfully acquired Parsing all Control Methods:........................................................................................................................................................................................................................................................................................................................................................................................................ Table [DSDT](id F005) - 1317 Objects with 63 Devices 392 Methods 20 Regions Parsing all Control Methods:. Table [SSDT](id F003) - 1 Objects with 0 Devices 1 Methods 0 Regions ACPI Namespace successfully loaded at root c048c560 ACPI: setting ELCR to 0200 (from 0800) evxfevnt-0094 [03] acpi_enable : Transition to ACPI mode successful NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20041105 evgpeblk-0979 [06] ev_create_gpe_block : GPE 00 to 1F [_GPE] 4 regs on int 0x9 evgpeblk-0987 [06] ev_create_gpe_block : Found 8 Wake, Enabled 0 Runtime GPEs in this block ACPI: Found ECDT Completing Region/Field/Buffer/Package initialization:....................................................................................................................................................................................................................................................... Initialized 19/20 Regions 123/123 Fields 67/67 Buffers 38/46 Packages (1327 nodes) Executing all Device _STA and_INI methods:.............................................................. 62 Devices found containing: 62 _STA, 9 _INI methods ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: Embedded Controller [EC] (gpe 28) ACPI: Power Resource [PUBS] (on) Linux Plug and Play Support v0.97 (c) Adam Belay SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to bjorn.helgaas-VXdhtT5mjnY@public.gmane.org ** so I can fix the driver. Simple Boot Flag at 0x35 set to 0x1 NTFS driver 2.1.22 [Flags: R/W]. Initializing Cryptographic API ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID] ACPI: Sleep Button (CM) [SLPB] ACPI: Processor [CPU] (supports C1 C2 C3) ACPI: Processor [CPU] (supports 8 throttling states) ACPI: Thermal Zone [THM0] (56 C) ibm_acpi: IBM ThinkPad ACPI Extras v0.8 ibm_acpi: http://ibm-acpi.sf.net/ acpi_bus-0081 [05] acpi_bus_get_device : Error getting context for object [dff59ce8] Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11 [drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies Inc Radeon R250 Lf [Radeon Mobility 9000 M9] serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 11 (level, low) -> IRQ 11 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Intel(R) PRO/1000 Network Driver - version 5.5.4-k2-NAPI Copyright (c) 1999-2004 Intel Corporation. ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 11 (level, low) -> IRQ 11 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 11 (level, low) -> IRQ 11 ICH4: chipset revision 1 ICH4: not 100%% native mode: will probe irqs later ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio hda: HTS726060M9AT00, ATA DISK drive elevator: using anticipatory as default io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: TOSHIBA DVD-ROM SD-R9012, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: Host Protected Area detected. ^Icurrent capacity is 110648690 sectors (56652 MB) ^Inative capacity is 117210240 sectors (60011 MB) hda: Host Protected Area disabled. hda: 117210240 sectors (60011 MB) w/7877KiB Cache, CHS=65535/16/63, UDMA(100) hda: hda1 hda2 hda3 hda4 hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 11 (level, low) -> IRQ 11 ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller ehci_hcd 0000:00:1d.7: irq 11, pci mem 0xc0000000 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 uhci_hcd 0000:00:1d.0: irq 11, io base 0x1800 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 uhci_hcd 0000:00:1d.1: irq 11, io base 0x1820 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 uhci_hcd 0000:00:1d.2: irq 11, io base 0x1840 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 Synaptics Touchpad, model: 1 Firmware: 5.9 Sensor: 44 new absolute packet format Touchpad has extended capability bits -> multifinger detection -> palm detection -> pass-through port input: SynPS/2 Synaptics TouchPad on isa0060/serio1 serio: Synaptics pass-through port at isa0060/serio1/input0 input: PS/2 Generic Mouse on synaptics-pt/serio0 Advanced Linux Sound Architecture Driver Version 1.0.6 (Sun Aug 15 07:17:53 2004 UTC). ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 11 (level, low) -> IRQ 11 intel8x0_measure_ac97_clock: measured 49360 usecs intel8x0: clocking to 48000 ALSA device list: #0: Intel 82801DB-ICH4 with AD1981B at 0xc0000c00, irq 11 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI wakeup devices: LID SLPB PCI0 UART PCI1 USB0 USB1 USB2 AC9M ACPI: (supports S0 S3 S4 S5) EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. EXT3-fs: hda3: orphan cleanup on readonly fs kjournald starting. Commit interval 5 seconds EXT3-fs: hda3: 40 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 136k freed Adding 498952k swap on /dev/hda2. Priority:-1 extents:1 EXT3 FS on hda3, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda4, internal journal EXT3-fs: mounted filesystem with ordered data mode. ACPI: Video Device [VID] (multi-head: yes rom: no post: no) parport_pc: Ignoring new-style parameters in presence of obsolete ones parport0: PC-style at 0x3bc [PCSPP(,...)] lp0: using parport0 (polling). xfs: ignoring font path element /usr/lib/X11/fonts/CID/ (unreadable) xfs: ignoring font path element /usr/lib/X11/fonts/cyrillic/ (unreadable) xfs: ignoring font path element /var/lib/defoma/x-ttcidfont-conf.d/dirs/CID (unreadable) --=-43Ndiy4K5YNBK+xgUni4-- ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt