From mboxrd@z Thu Jan 1 00:00:00 1970 From: Bjorn Helgaas Subject: Re: Help wanted with IRQ routing. Date: Wed, 16 Feb 2005 09:14:53 -0700 Message-ID: <1108570493.20278.9.camel@eeyore> References: <1108371574.12611.61.camel@desktop.cunningham.myip.net.au> <1108398282.4208.10.camel@eeyore> <1108419552.12611.98.camel@desktop.cunningham.myip.net.au> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit In-Reply-To: <1108419552.12611.98.camel-r49W/1Cwd2ff0s6lnCXPX/uOuaPYTxhvJwvTLr3MMZM@public.gmane.org> Sender: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Errors-To: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: ncunningham-3EexvZdKGZRWk0Htik3J/w@public.gmane.org Cc: ACPI List List-Id: linux-acpi@vger.kernel.org On Tue, 2005-02-15 at 09:19 +1100, Nigel Cunningham wrote: > > Did you try booting with "pci=routeirq" or turning off PNPACPI? > > I've seen a few reports of IRQ problems with PCMCIA devices that > > seemed to be related to one or both of these. > > I tried pci=routeirq and it didn't make a difference. I assume PNPACPI > is the ACPI Hotplug driver? If so, it didn't help either. It if helps at > all, this is an Omnibook XE3-GF (4304 flavour). Actually, PNPACPI is a build-time config option. If your kernel is new enough, you can also turn it off at boot-time with "pnpacpi=off". ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click