From: Sergio Monteiro Basto <sergio-qOf5bGQp09kptuEoxK/DLR2eb7JE58TQ@public.gmane.org>
Cc: acpi-devel
<acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org>
Subject: Re: "Found HC with no IRQ" empty /proc/bus/usb
Date: Sun, 03 Apr 2005 16:27:44 +0100 [thread overview]
Message-ID: <1112542065.790.0.camel@bastov> (raw)
In-Reply-To: <424D8C48.1090804-sAvY64jVBerkQYj/0HfcvtBPR1lH4CV8@public.gmane.org>
is the age of the Bios is less then 2001 ? probably is , if so, you
should append "acpi=force" to enable ACPI.
On some Bios configurations, you also have to enable ACPI and disable
APM ( on Bios configuration )
On Fri, 2005-04-01 at 13:00 -0500, Allan Mcintosh wrote:
> Hey,
>
> On my debian Dual 550MHz Pentium III machine, I am unable to get usb
> working. I didn't notice anything obvious in the bios that would disable
> USB. Any suggestions would be greatly appreciated.
>
> I have tried several kernels, most recently 2.6.10 and 2.6.11.5.
> I have also tried booting with variations of
>
> append="noapic acpi=off pci=biosirq"
>
>
> Upon loading uhci_hcd module I see the following
>
> $ dmesg
> <snip>
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> usbcore: registered new driver hiddev
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.0:USB HID core driver
> USB Universal Host Controller Interface driver v2.2
> PCI: Enabling device 0000:00:07.2 (0000 -> 0001)
> PCI: No IRQ known for interrupt pin C of device 0000:00:07.2. Probably
> buggy MP table.
> uhci_hcd 0000:00:07.2: Found HC with no IRQ. Check BIOS/PCI
> 0000:00:07.2 setup!
>
>
>
> $ lspci -vv
> <snip>
> 0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev
> 01) (prog-if 00 [UHCI])
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin D routed to IRQ 0
> Region 4: I/O ports at ef80 [size=32]
>
>
> $ lsmod
> Module Size Used by
> uhci_hcd 34640 0
> ehci_hcd 34180 0
> usbhid 33184 0
> usbcore 123096 3 uhci_hcd,ehci_hcd,usbhid
> <snip>
>
>
>
>
>
>
>
>
>
--
Sérgio M.B.
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
prev parent reply other threads:[~2005-04-03 15:27 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-04-01 18:00 "Found HC with no IRQ" empty /proc/bus/usb Allan Mcintosh
[not found] ` <424D8C48.1090804-sAvY64jVBerkQYj/0HfcvtBPR1lH4CV8@public.gmane.org>
2005-04-03 15:27 ` Sergio Monteiro Basto [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1112542065.790.0.camel@bastov \
--to=sergio-qof5bgqp09kptueoxk/dlr2eb7je58tq@public.gmane.org \
--cc=acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox