* Fw: Re: 2.6.12-rc2-mm2
@ 2005-04-08 16:29 Andrew Morton
[not found] ` <20050408092947.41175d63.akpm-3NddpPZAyC0@public.gmane.org>
0 siblings, 1 reply; 5+ messages in thread
From: Andrew Morton @ 2005-04-08 16:29 UTC (permalink / raw)
To: Brown, Len, acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f; +Cc: Michael Thonke
I assume this problem is related to that "No ACPI bus support"
message, which is new in bk-acpi.patch.
Begin forwarded message:
Date: Fri, 08 Apr 2005 14:02:12 +0200
From: Michael Thonke <iogl64nx-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Andrew Morton <akpm-3NddpPZAyC0@public.gmane.org>
Subject: Re: 2.6.12-rc2-mm2
Hello Andrew,
Im sorry if this mail is a double post.I randomly get mails from lkml.org with the warning
I posted a virus or something...
Along the 2.6.12-rcX-mmX PCI-Express is not usable at all with
mm-patchsets. I posted some days ago the problem taht
the IRQs get not regonized by the kernel also with pci=routeirq nothing
helped.The problem still the same and some new problems now with
2.6.12-rc2-mm2 in addition.
This computer has an Intel Pentium 4 630 with HT,EIST and EMT64 enabled.
In 2.6.12-rc2 everything works perfect.
So I post my dmesg output maybe you can see some interesting things
there. I hope you'll find the issue or bug..whatever hope that
its possible to sort the problems out.
Thanks in Advanced
Now I post the 2.6.12-rc2-mm2 and after that the 2.6.12-rc2 vanilla
kernel output
2.6.12-rc2-mm2 output:
Bootdata ok (command line is root=/dev/md1 vga=794 quiet)
Linux version 2.6.12-rc2-mm2-md1 (root@ioGL64NX) (gcc-Version 3.4.3
20041125 (Gentoo Linux 3.4.3-r1, ssp-3.4.3-0, pie-8.7.7)) #2 SMP PREEMPT
Fri Apr 8 13:35:42 CEST 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data)
BIOS-e820: 000000003ffbe000 - 000000003fff0000 (ACPI NVS)
BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
ACPI: RSDP (v002 ACPIAM ) @
0x00000000000fafa0
ACPI: XSDT (v001 A M I OEMXSDT 0x02000503 MSFT 0x00000097) @
0x000000003ffb0100
ACPI: FADT (v003 A M I OEMFACP 0x02000503 MSFT 0x00000097) @
0x000000003ffb0290
ACPI: MADT (v001 A M I OEMAPIC 0x02000503 MSFT 0x00000097) @
0x000000003ffb0390
ACPI: OEMB (v001 A M I AMI_OEM 0x02000503 MSFT 0x00000097) @
0x000000003ffbe040
ACPI: MCFG (v001 A M I OEMMCFG 0x02000503 MSFT 0x00000097) @
0x000000003ffb6c40
ACPI: DSDT (v001 A0144 A0144000 0x00000000 INTL 0x02002026) @
0x0000000000000000
On node 0 totalpages: 262064
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 257968 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 40000000 (gap: 40000000:bfb00000)
Built 1 zonelists
Initializing CPU#0
Kernel command line: root=/dev/md1 vga=794 quiet console=tty0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 1.193182 MHz PIT timer.
time.c: Detected 3527.408 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Memory: 1024964k/1048256k available (3240k kernel code, 22664k reserved,
1218k data, 212k init)
Calibrating delay loop... 6963.20 BogoMIPS (lpj=3481600)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU0: Thermal monitoring enabled (TM1)
Using IO APIC NMI watchdog
activating NMI Watchdog ... done.
Using local APIC timer interrupts.
Detected 13.778 MHz APIC timer.
Booting processor 1/1 rip 6000 rsp ffff81003ff35f58
Initializing CPU#1
Calibrating delay loop... 7045.12 BogoMIPS (lpj=3522560)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU1: Thermal monitoring enabled (TM1)
Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03
Synced TSC of CPU 1 difference 107374180328
APIC error on CPU1: 00(40)
Brought up 2 CPUs
time.c: Using PIT/TSC based timekeeping.
CPU0 attaching sched-domain:
domain 0: span 3
groups: 1 2
CPU1 attaching sched-domain:
domain 0: span 3
groups: 2 1
NET: Registered protocol family 16
PCI: Using configuration type 1
PCI: Using MMCONFIG at e0000000
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:04:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Can't get handler for 0000:00:1b.0
ACPI: Can't get handler for 0000:00:1f.3
ACPI: Can't get handler for 0000:04:00.0
ACPI: Can't get handler for 0000:02:00.0
ACPI: Can't get handler for 0000:01:09.0
ACPI: Can't get handler for 0000:01:0a.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: No ACPI bus support for 00:00
ACPI: No ACPI bus support for 00:01
ACPI: No ACPI bus support for 00:02
ACPI: No ACPI bus support for 00:03
ACPI: No ACPI bus support for 00:04
ACPI: No ACPI bus support for 00:05
ACPI: No ACPI bus support for 00:06
ACPI: No ACPI bus support for 00:07
ACPI: No ACPI bus support for 00:08
ACPI: No ACPI bus support for 00:09
ACPI: No ACPI bus support for 00:0a
ACPI: No ACPI bus support for 00:0b
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
pnp: 00:06: ioport range 0x290-0x297 has been reserved
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
inotify device minor=63
SGI XFS with large block/inode numbers, no debug enabled
Initializing Cryptographic API
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
ACPI: No ACPI bus support for pcie00
Allocate Port Service[pcie03]
ACPI: No ACPI bus support for pcie03
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
ACPI: No ACPI bus support for pcie00
Allocate Port Service[pcie02]
ACPI: No ACPI bus support for pcie02
Allocate Port Service[pcie03]
ACPI: No ACPI bus support for pcie03
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
ACPI: No ACPI bus support for pcie00
Allocate Port Service[pcie02]
ACPI: No ACPI bus support for pcie02
Allocate Port Service[pcie03]
ACPI: No ACPI bus support for pcie03
vesafb: framebuffer at 0xd8000000, mapped to 0xffffc20010100000, using
5120k, total 131072k
vesafb: mode is 1280x1024x16, linelength=2560, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
ACPI: No ACPI bus support for vesafb.0
fb1: Virtual frame buffer device, using 1024K of video memory
ACPI: No ACPI bus support for vfb.0
ACPI: CPU0 (power states: C1[C1])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: CPU1 (power states: C1[C1])
Real Time Clock Driver v1.12
io scheduler noop registered
io scheduler cfq registered
ACPI: Floppy Controller [FDC] at I/O 0x3f0-0x3f5, 0x3f7 irq 6 dma channel 2
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ACPI: No ACPI bus support for floppy.0
RAMDISK driver initialized: 4 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
ub: sizeof ub_scsi_cmd 88 ub_dev 2672
usbcore: registered new driver ub
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 201
sk98lin: Network Device Driver v8.15.1.3
(C)Copyright 1999-2005 Marvell(R).
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:02:00.0 to 64
eth0: Marvell Yukon 88E8053 Gigabit Ethernet Controller
PrefPort:A RlmtMode:Check Link State
netconsole: not configured, aborting
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH6: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 217
ICH6: chipset revision 4
ICH6: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: PLEXTOR DVDR PX-716A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ACPI: No ACPI bus support for 0.0
Probing IDE interface ide1...
hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
libata version 1.10 loaded.
ata_piix version 1.03
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0xAC00 ctl 0xA882 bmdma 0xA400 irq 225
ata2: SATA max UDMA/133 cmd 0xA800 ctl 0xA482 bmdma 0xA408 irq 225
ata1: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
88:20ff
ata1: dev 0 ATA, max UDMA7, 234493056 sectors: lba48
ata1: dev 1 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
88:20ff
ata1: dev 1 ATA, max UDMA7, 312581808 sectors: lba48
ata1: dev 0 configured for UDMA/133
ata1: dev 1 configured for UDMA/133
scsi0 : ata_piix
ata2: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
88:20ff
ata2: dev 0 ATA, max UDMA7, 234493056 sectors: lba48
ata2: dev 1 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
88:20ff
ata2: dev 1 ATA, max UDMA7, 312581808 sectors: lba48
ata2: dev 0 configured for UDMA/133
ata2: dev 1 configured for UDMA/133
scsi1 : ata_piix
Vendor: ATA Model: SAMSUNG SP1213C Rev: SV10
Type: Direct-Access ANSI SCSI revision: 05
ACPI: No ACPI bus support for 0:0:0:0
Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10
Type: Direct-Access ANSI SCSI revision: 05
ACPI: No ACPI bus support for 0:0:1:0
Vendor: ATA Model: SAMSUNG SP1213C Rev: SV10
Type: Direct-Access ANSI SCSI revision: 05
ACPI: No ACPI bus support for 1:0:0:0
Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10
Type: Direct-Access ANSI SCSI revision: 05
ACPI: No ACPI bus support for 1:0:1:0
SCSI device sda: 234493056 512-byte hdwr sectors (120060 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 234493056 512-byte hdwr sectors (120060 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 < sda5 sda6 sda7 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2 < sdb5 >
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
SCSI device sdc: 234493056 512-byte hdwr sectors (120060 MB)
SCSI device sdc: drive cache: write back
SCSI device sdc: 234493056 512-byte hdwr sectors (120060 MB)
SCSI device sdc: drive cache: write back
sdc: sdc1 sdc2 < sdc5 sdc6 >
Attached scsi disk sdc at scsi1, channel 0, id 0, lun 0
SCSI device sdd: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sdd: drive cache: write back
SCSI device sdd: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sdd: drive cache: write back
sdd: sdd1 sdd2 < sdd5 >
Attached scsi disk sdd at scsi1, channel 0, id 1, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Attached scsi generic sg1 at scsi0, channel 0, id 1, lun 0, type 0
Attached scsi generic sg2 at scsi1, channel 0, id 0, lun 0, type 0
Attached scsi generic sg3 at scsi1, channel 0, id 1, lun 0, type 0
usbmon: debugs is not available
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB2 EHCI Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 233, io mem 0xd2cff800
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
ACPI: No ACPI bus support for usb1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ACPI: No ACPI bus support for 1-0:1.0
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #1
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 233, io base 0x00009880
ACPI: No ACPI bus support for usb2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: No ACPI bus support for 2-0:1.0
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #2
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 225, io base 0x00009c00
ACPI: No ACPI bus support for usb3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: No ACPI bus support for 3-0:1.0
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #3
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 217, io base 0x0000a000
ACPI: No ACPI bus support for usb4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: No ACPI bus support for 4-0:1.0
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #4
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000a080
ACPI: No ACPI bus support for usb5
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: No ACPI bus support for 5-0:1.0
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: automatically using best checksumming function: generic_sse
generic_sse: 5116.000 MB/sec
raid5: using function: generic_sse (5116.000 MB/sec)
md: multipath personality registered as nr 7
md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 3.38
Advanced Linux Sound Architecture Driver Version 1.0.9rc2 (Thu Mar 24
10:33:39 2005 UTC).
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ALSA device list:
#0: HDA Intel at 0xd2cf4000 irq 169
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 64Kbytes
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
ip_conntrack version 2.1 (4094 buckets, 32752 max) - 296 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost-vhD3WmCyG/PR7s880joybQ@public.gmane.org>.
http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
Testing NMI watchdog ... OK.
ACPI wakeup devices:
P0P1 P0P3 P0P4 P0P5 P0P6 P0P7 USB1 USB2 USB3 USB4 EUSB MC97
ACPI: (supports S0 S1 S3 S4 S5)
md: Autodetecting RAID arrays.
usb 3-1: new low speed USB device using uhci_hcd and address 2
md: autorun ...
md: considering sdd5 ...
md: adding sdd5 ...
md: sdd1 has different UUID to sdd5
md: sdc6 has different UUID to sdd5
md: sdc5 has different UUID to sdd5
md: adding sdb5 ...
md: sdb1 has different UUID to sdd5
md: sda6 has different UUID to sdd5
md: sda5 has different UUID to sdd5
md: created md3
md: bind<sdb5>
md: bind<sdd5>
md: running: <sdd5><sdb5>
raid1: raid set md3 active with 2 out of 2 mirrors
md: considering sdd1 ...
md: adding sdd1 ...
md: adding sdc6 ...
md: sdc5 has different UUID to sdd1
md: adding sdb1 ...
md: adding sda6 ...
md: sda5 has different UUID to sdd1
md: created md1
md: bind<sda6>
md: bind<sdb1>
md: bind<sdc6>
md: bind<sdd1>
md: running: <sdd1><sdc6><sdb1><sda6>
md1: setting max_sectors to 128, segment boundary to 32767
raid0: looking at sdd1
raid0: comparing sdd1(7325504) with sdd1(7325504)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at sdc6
raid0: comparing sdc6(7325504) with sdd1(7325504)
raid0: EQUAL
raid0: looking at sdb1
raid0: comparing sdb1(7325504) with sdd1(7325504)
raid0: EQUAL
raid0: looking at sda6
raid0: comparing sda6(7325504) with sdd1(7325504)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 29302016 blocks.
raid0 : conf->hash_spacing is 29302016 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
md: considering sdc5 ...
md: adding sdc5 ...
md: adding sda5 ...
md: created md0
md: bind<sda5>
md: bind<sdc5>
md: running: <sdc5><sda5>
md0: setting max_sectors to 128, segment boundary to 32767
raid0: looking at sdc5
raid0: comparing sdc5(30001280) with sdc5(30001280)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at sda5
raid0: comparing sda5(30001280) with sdc5(30001280)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 60002560 blocks.
raid0 : conf->hash_spacing is 60002560 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
md: ... autorun DONE.
UDF-fs: No partition found (1)
XFS mounting filesystem md1
ACPI: No ACPI bus support for 3-1
Ending clean XFS mount for filesystem: md1
VFS: Mounted root (xfs filesystem) readonly.
Freeing unused kernel memory: 212k freed
input: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on
usb-0000:00:1d.1-1
ACPI: No ACPI bus support for 3-1:1.0
input: USB HID v1.10 Device [Logitech HID compliant keyboard] on
usb-0000:00:1d.1-1
ACPI: No ACPI bus support for 3-1:1.1
usb 3-2: new low speed USB device using uhci_hcd and address 3
ACPI: No ACPI bus support for 3-2
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
usb-0000:00:1d.1-2
ACPI: No ACPI bus support for 3-2:1.0
2.6.12-rc2 vanilla kernel:
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data)
BIOS-e820: 000000003ffbe000 - 000000003fff0000 (ACPI NVS)
BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
ACPI: RSDP (v002 ACPIAM ) @
0x00000000000fafa0
ACPI: XSDT (v001 A M I OEMXSDT 0x02000503 MSFT 0x00000097) @
0x000000003ffb0100
ACPI: FADT (v003 A M I OEMFACP 0x02000503 MSFT 0x00000097) @
0x000000003ffb0290
ACPI: MADT (v001 A M I OEMAPIC 0x02000503 MSFT 0x00000097) @
0x000000003ffb0390
ACPI: OEMB (v001 A M I AMI_OEM 0x02000503 MSFT 0x00000097) @
0x000000003ffbe040
ACPI: MCFG (v001 A M I OEMMCFG 0x02000503 MSFT 0x00000097) @
0x000000003ffb6c40
ACPI: DSDT (v001 A0144 A0144000 0x00000000 INTL 0x02002026) @
0x0000000000000000
On node 0 totalpages: 262064
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 257968 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 16
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: root=/dev/md1 vga=794 quiet console=tty0
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 1.193182 MHz PIT timer.
time.c: Detected 3527.425 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Memory: 1024944k/1048256k available (3249k kernel code, 22684k reserved,
1243k data, 208k init)
Calibrating delay loop... 6963.20 BogoMIPS (lpj=3481600)
Security Framework v1.0.0 initialized
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU0: Thermal monitoring enabled (TM1)
Using IO APIC NMI watchdog
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03
Booting processor 1/1 rip 6000 rsp ffff81003ff17f58
Initializing CPU#1
Calibrating delay loop... 7045.12 BogoMIPS (lpj=3522560)
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU1: Thermal monitoring enabled (TM1)
Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03
Total of 2 processors activated (14008.32 BogoMIPS).
activating NMI Watchdog ... done.
testing NMI watchdog ... CPU#1: NMI appears to be stuck (0)!
Using local APIC timer interrupts.
Detected 13.778 MHz APIC timer.
checking TSC synchronization across 2 CPUs: passed.
time.c: Using PIT/TSC based timekeeping.
Brought up 2 CPUs
CPU0 attaching sched-domain:
domain 0: span 3
groups: 1 2
domain 1: span 3
groups: 3
CPU1 attaching sched-domain:
domain 0: span 3
groups: 2 1
domain 1: span 3
groups: 3
NET: Registered protocol family 16
PCI: Using configuration type 1
PCI: Using MMCONFIG at e0000000
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:04:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
pnp: 00:06: ioport range 0x290-0x297 has been reserved
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
inotify device minor=63
SGI XFS with large block/inode numbers, no debug enabled
Initializing Cryptographic API
ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:01.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie03]
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie02]
Allocate Port Service[pcie03]
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[pcie00]
Allocate Port Service[pcie02]
Allocate Port Service[pcie03]
vesafb: framebuffer at 0xd8000000, mapped to 0xffffc20010100000, using
5120k, total 131072k
vesafb: mode is 1280x1024x16, linelength=2560, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
fb1: Virtual frame buffer device, using 1024K of video memory
ACPI: Processor [CPU1] (supports 8 throttling states)
Real Time Clock Driver v1.12
io scheduler noop registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 4 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
ub: sizeof ub_scsi_cmd 88 ub_dev 2680
usbcore: registered new driver ub
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 201
sk98lin: Network Device Driver v8.15.1.3
(C)Copyright 1999-2005 Marvell(R).
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:02:00.0 to 64
eth0: Marvell Yukon 88E8053 Gigabit Ethernet Controller
PrefPort:A RlmtMode:Check Link State
netconsole: not configured, aborting
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH6: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 217
ICH6: chipset revision 4
ICH6: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: PLEXTOR DVDR PX-716A, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
libata version 1.10 loaded.
ata_piix version 1.03
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0xAC00 ctl 0xA882 bmdma 0xA400 irq 225
ata2: SATA max UDMA/133 cmd 0xA800 ctl 0xA482 bmdma 0xA408 irq 225
ata1: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
88:20ff
ata1: dev 0 ATA, max UDMA7, 234493056 sectors: lba48
ata1: dev 1 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
88:20ff
ata1: dev 1 ATA, max UDMA7, 312581808 sectors: lba48
ata1: dev 0 configured for UDMA/133
ata1: dev 1 configured for UDMA/133
scsi0 : ata_piix
ata2: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
88:20ff
ata2: dev 0 ATA, max UDMA7, 234493056 sectors: lba48
ata2: dev 1 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
88:20ff
ata2: dev 1 ATA, max UDMA7, 312581808 sectors: lba48
ata2: dev 0 configured for UDMA/133
ata2: dev 1 configured for UDMA/133
scsi1 : ata_piix
Vendor: ATA Model: SAMSUNG SP1213C Rev: SV10
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: SAMSUNG SP1213C Rev: SV10
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 234493056 512-byte hdwr sectors (120060 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 234493056 512-byte hdwr sectors (120060 MB)
SCSI device sda: drive cache: write back
sda: sda1 sda2 < sda5 sda6 sda7 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2 < sdb5 >
Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
SCSI device sdc: 234493056 512-byte hdwr sectors (120060 MB)
SCSI device sdc: drive cache: write back
SCSI device sdc: 234493056 512-byte hdwr sectors (120060 MB)
SCSI device sdc: drive cache: write back
sdc: sdc1 sdc2 < sdc5 sdc6 >
Attached scsi disk sdc at scsi1, channel 0, id 0, lun 0
SCSI device sdd: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sdd: drive cache: write back
SCSI device sdd: 312581808 512-byte hdwr sectors (160042 MB)
SCSI device sdd: drive cache: write back
sdd: sdd1 sdd2 < sdd5 >
Attached scsi disk sdd at scsi1, channel 0, id 1, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
Attached scsi generic sg1 at scsi0, channel 0, id 1, lun 0, type 0
Attached scsi generic sg2 at scsi1, channel 0, id 0, lun 0, type 0
Attached scsi generic sg3 at scsi1, channel 0, id 1, lun 0, type 0
usbmon: debugs is not available
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB2 EHCI Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 233, io mem 0xd2cff800
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #1
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 233, io base 0x00009880
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #2
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 225, io base 0x00009c00
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 217
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #3
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 217, io base 0x0000a000
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #4
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000a080
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: automatically using best checksumming function: generic_sse
generic_sse: 5108.000 MB/sec
raid5: using function: generic_sse (5108.000 MB/sec)
md: multipath personality registered as nr 7
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
Advanced Linux Sound Architecture Driver Version 1.0.9rc2 (Thu Mar 24
10:33:39 2005 UTC).
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ALSA device list:
#0: HDA Intel at 0xd2cf4000 irq 169
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 64Kbytes
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
ip_conntrack version 2.1 (4094 buckets, 32752 max) - 304 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost-vhD3WmCyG/PR7s880joybQ@public.gmane.org>.
http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices:
P0P1 P0P3 P0P4 P0P5 P0P6 P0P7 USB1 USB2 USB3 USB4 EUSB MC97
ACPI: (supports S0 S1 S3 S4 S5)
md: Autodetecting RAID arrays.
usb 3-1: new low speed USB device using uhci_hcd and address 2
md: autorun ...
md: considering sdd5 ...
md: adding sdd5 ...
md: sdd1 has different UUID to sdd5
md: sdc6 has different UUID to sdd5
md: sdc5 has different UUID to sdd5
md: adding sdb5 ...
md: sdb1 has different UUID to sdd5
md: sda6 has different UUID to sdd5
md: sda5 has different UUID to sdd5
md: created md3
md: bind<sdb5>
md: bind<sdd5>
md: running: <sdd5><sdb5>
raid1: raid set md3 active with 2 out of 2 mirrors
md: considering sdd1 ...
md: adding sdd1 ...
md: adding sdc6 ...
md: sdc5 has different UUID to sdd1
md: adding sdb1 ...
md: adding sda6 ...
md: sda5 has different UUID to sdd1
md: created md1
md: bind<sda6>
md: bind<sdb1>
md: bind<sdc6>
md: bind<sdd1>
md: running: <sdd1><sdc6><sdb1><sda6>
md1: setting max_sectors to 128, segment boundary to 32767
raid0: looking at sdd1
raid0: comparing sdd1(7325504) with sdd1(7325504)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at sdc6
raid0: comparing sdc6(7325504) with sdd1(7325504)
raid0: EQUAL
raid0: looking at sdb1
raid0: comparing sdb1(7325504) with sdd1(7325504)
raid0: EQUAL
raid0: looking at sda6
raid0: comparing sda6(7325504) with sdd1(7325504)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 29302016 blocks.
raid0 : conf->hash_spacing is 29302016 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
md: considering sdc5 ...
md: adding sdc5 ...
md: adding sda5 ...
md: created md0
md: bind<sda5>
md: bind<sdc5>
md: running: <sdc5><sda5>
md0: setting max_sectors to 128, segment boundary to 32767
raid0: looking at sdc5
raid0: comparing sdc5(30001280) with sdc5(30001280)
raid0: END
raid0: ==> UNIQUE
raid0: 1 zones
raid0: looking at sda5
raid0: comparing sda5(30001280) with sdc5(30001280)
raid0: EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 60002560 blocks.
raid0 : conf->hash_spacing is 60002560 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 8 bytes for hash.
md: ... autorun DONE.
UDF-fs: No partition found (1)
XFS mounting filesystem md1
Ending clean XFS mount for filesystem: md1
VFS: Mounted root (xfs filesystem) readonly.
Freeing unused kernel memory: 208k freed
input: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on
usb-0000:00:1d.1-1
input: USB HID v1.10 Device [Logitech HID compliant keyboard] on
usb-0000:00:1d.1-1
usb 3-2: new low speed USB device using uhci_hcd and address 3
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
usb-0000:00:1d.1-2
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:04:00.0 to 64
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Fw: Re: 2.6.12-rc2-mm2
[not found] ` <20050408092947.41175d63.akpm-3NddpPZAyC0@public.gmane.org>
@ 2005-04-08 21:16 ` Bjorn Helgaas
2005-04-08 22:37 ` Michael Thonke
1 sibling, 0 replies; 5+ messages in thread
From: Bjorn Helgaas @ 2005-04-08 21:16 UTC (permalink / raw)
To: tom.l.nguyen-ral2JQCrhuEAvxtiuMwx3w; +Cc: Len Brown, ACPI List, Michael Thonke
On Fri, 2005-04-08 at 09:29 -0700, Andrew Morton wrote:
> I assume this problem is related to that "No ACPI bus support"
> message, which is new in bk-acpi.patch.
I don't see any obvious ACPI problems. True, there are a bunch
of "ACPI: Can't get handler" and "ACPI: No ACPI bus support"
messages, but that looks like device model stuff that isn't
quite cooked yet and should be harmless. Maybe Shaohua can
confirm/deny.
And the driver (sk98lin, at least) sees the device and seems to
get the same IRQ in -mm and it does in 2.6.11.
But I'm suspicious of the PCI Express changes, since PCI-E
seems to get involved in IRQ routing somehow and -mm contains
interesting-looking changes in that area, i.e., in
drivers/pci/pcie/portdrv_core.c.
Tom, thread starts here:
http://www.uwsg.iu.edu/hypermail/linux/kernel/0504.0/0101.html
> Begin forwarded message:
>
> Date: Fri, 08 Apr 2005 14:02:12 +0200
> From: Michael Thonke <iogl64nx-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> To: Andrew Morton <akpm-3NddpPZAyC0@public.gmane.org>
> Subject: Re: 2.6.12-rc2-mm2
>
>
> Hello Andrew,
>
> Im sorry if this mail is a double post.I randomly get mails from lkml.org with the warning
> I posted a virus or something...
>
> Along the 2.6.12-rcX-mmX PCI-Express is not usable at all with
> mm-patchsets. I posted some days ago the problem taht
> the IRQs get not regonized by the kernel also with pci=routeirq nothing
> helped.The problem still the same and some new problems now with
> 2.6.12-rc2-mm2 in addition.
>
> This computer has an Intel Pentium 4 630 with HT,EIST and EMT64 enabled.
> In 2.6.12-rc2 everything works perfect.
> So I post my dmesg output maybe you can see some interesting things
> there. I hope you'll find the issue or bug..whatever hope that
> its possible to sort the problems out.
>
> Thanks in Advanced
>
> Now I post the 2.6.12-rc2-mm2 and after that the 2.6.12-rc2 vanilla
> kernel output
>
> 2.6.12-rc2-mm2 output:
>
> Bootdata ok (command line is root=/dev/md1 vga=794 quiet)
> Linux version 2.6.12-rc2-mm2-md1 (root@ioGL64NX) (gcc-Version 3.4.3
> 20041125 (Gentoo Linux 3.4.3-r1, ssp-3.4.3-0, pie-8.7.7)) #2 SMP PREEMPT
> Fri Apr 8 13:35:42 CEST 2005
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
> BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data)
> BIOS-e820: 000000003ffbe000 - 000000003fff0000 (ACPI NVS)
> BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
> ACPI: RSDP (v002 ACPIAM ) @
> 0x00000000000fafa0
> ACPI: XSDT (v001 A M I OEMXSDT 0x02000503 MSFT 0x00000097) @
> 0x000000003ffb0100
> ACPI: FADT (v003 A M I OEMFACP 0x02000503 MSFT 0x00000097) @
> 0x000000003ffb0290
> ACPI: MADT (v001 A M I OEMAPIC 0x02000503 MSFT 0x00000097) @
> 0x000000003ffb0390
> ACPI: OEMB (v001 A M I AMI_OEM 0x02000503 MSFT 0x00000097) @
> 0x000000003ffbe040
> ACPI: MCFG (v001 A M I OEMMCFG 0x02000503 MSFT 0x00000097) @
> 0x000000003ffb6c40
> ACPI: DSDT (v001 A0144 A0144000 0x00000000 INTL 0x02002026) @
> 0x0000000000000000
> On node 0 totalpages: 262064
> DMA zone: 4096 pages, LIFO batch:1
> Normal zone: 257968 pages, LIFO batch:16
> HighMem zone: 0 pages, LIFO batch:1
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> Processor #0 15:4 APIC version 16
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> Processor #1 15:4 APIC version 16
> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Setting APIC routing to flat
> Using ACPI (MADT) for SMP configuration information
> Allocating PCI resources starting at 40000000 (gap: 40000000:bfb00000)
> Built 1 zonelists
> Initializing CPU#0
> Kernel command line: root=/dev/md1 vga=794 quiet console=tty0
> PID hash table entries: 4096 (order: 12, 131072 bytes)
> time.c: Using 1.193182 MHz PIT timer.
> time.c: Detected 3527.408 MHz processor.
> Console: colour dummy device 80x25
> Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
> Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
> Memory: 1024964k/1048256k available (3240k kernel code, 22664k reserved,
> 1218k data, 212k init)
> Calibrating delay loop... 6963.20 BogoMIPS (lpj=3481600)
> Security Framework v1.0.0 initialized
> Capability LSM initialized
> Mount-cache hash table entries: 256
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 2048K
> using mwait in idle threads.
> CPU: Physical Processor ID: 0
> CPU0: Thermal monitoring enabled (TM1)
> Using IO APIC NMI watchdog
> activating NMI Watchdog ... done.
> Using local APIC timer interrupts.
> Detected 13.778 MHz APIC timer.
> Booting processor 1/1 rip 6000 rsp ffff81003ff35f58
> Initializing CPU#1
> Calibrating delay loop... 7045.12 BogoMIPS (lpj=3522560)
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 2048K
> CPU: Physical Processor ID: 0
> CPU1: Thermal monitoring enabled (TM1)
> Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03
> Synced TSC of CPU 1 difference 107374180328
> APIC error on CPU1: 00(40)
> Brought up 2 CPUs
> time.c: Using PIT/TSC based timekeeping.
> CPU0 attaching sched-domain:
> domain 0: span 3
> groups: 1 2
> CPU1 attaching sched-domain:
> domain 0: span 3
> groups: 2 1
> NET: Registered protocol family 16
> PCI: Using configuration type 1
> PCI: Using MMCONFIG at e0000000
> mtrr: v2.0 (20020519)
> ACPI: Subsystem revision 20050309
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Probing PCI hardware (bus 00)
> ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
> PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
> Boot video device is 0000:04:00.0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: Can't get handler for 0000:00:1b.0
> ACPI: Can't get handler for 0000:00:1f.3
> ACPI: Can't get handler for 0000:04:00.0
> ACPI: Can't get handler for 0000:02:00.0
> ACPI: Can't get handler for 0000:01:09.0
> ACPI: Can't get handler for 0000:01:0a.0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
> disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
> disabled.
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> ACPI: No ACPI bus support for 00:00
> ACPI: No ACPI bus support for 00:01
> ACPI: No ACPI bus support for 00:02
> ACPI: No ACPI bus support for 00:03
> ACPI: No ACPI bus support for 00:04
> ACPI: No ACPI bus support for 00:05
> ACPI: No ACPI bus support for 00:06
> ACPI: No ACPI bus support for 00:07
> ACPI: No ACPI bus support for 00:08
> ACPI: No ACPI bus support for 00:09
> ACPI: No ACPI bus support for 00:0a
> ACPI: No ACPI bus support for 00:0b
> pnp: PnP ACPI: found 12 devices
> SCSI subsystem initialized
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
> report
> pnp: 00:06: ioport range 0x290-0x297 has been reserved
> IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
> inotify device minor=63
> SGI XFS with large block/inode numbers, no debug enabled
> Initializing Cryptographic API
> ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
> PCI: Setting latency timer of device 0000:00:01.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[pcie00]
> ACPI: No ACPI bus support for pcie00
> Allocate Port Service[pcie03]
> ACPI: No ACPI bus support for pcie03
> ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
> PCI: Setting latency timer of device 0000:00:1c.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[pcie00]
> ACPI: No ACPI bus support for pcie00
> Allocate Port Service[pcie02]
> ACPI: No ACPI bus support for pcie02
> Allocate Port Service[pcie03]
> ACPI: No ACPI bus support for pcie03
> ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 201
> PCI: Setting latency timer of device 0000:00:1c.1 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[pcie00]
> ACPI: No ACPI bus support for pcie00
> Allocate Port Service[pcie02]
> ACPI: No ACPI bus support for pcie02
> Allocate Port Service[pcie03]
> ACPI: No ACPI bus support for pcie03
> vesafb: framebuffer at 0xd8000000, mapped to 0xffffc20010100000, using
> 5120k, total 131072k
> vesafb: mode is 1280x1024x16, linelength=2560, pages=1
> vesafb: scrolling: redraw
> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
> Console: switching to colour frame buffer device 160x64
> fb0: VESA VGA frame buffer device
> ACPI: No ACPI bus support for vesafb.0
> fb1: Virtual frame buffer device, using 1024K of video memory
> ACPI: No ACPI bus support for vfb.0
> ACPI: CPU0 (power states: C1[C1])
> ACPI: Processor [CPU1] (supports 8 throttling states)
> ACPI: CPU1 (power states: C1[C1])
> Real Time Clock Driver v1.12
> io scheduler noop registered
> io scheduler cfq registered
> ACPI: Floppy Controller [FDC] at I/O 0x3f0-0x3f5, 0x3f7 irq 6 dma channel 2
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> ACPI: No ACPI bus support for floppy.0
> RAMDISK driver initialized: 4 RAM disks of 4096K size 1024 blocksize
> loop: loaded (max 8 devices)
> ub: sizeof ub_scsi_cmd 88 ub_dev 2672
> usbcore: registered new driver ub
> ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 201
> sk98lin: Network Device Driver v8.15.1.3
> (C)Copyright 1999-2005 Marvell(R).
> ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 201
> PCI: Setting latency timer of device 0000:02:00.0 to 64
> eth0: Marvell Yukon 88E8053 Gigabit Ethernet Controller
> PrefPort:A RlmtMode:Check Link State
> netconsole: not configured, aborting
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> ICH6: IDE controller at PCI slot 0000:00:1f.1
> ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 217
> ICH6: chipset revision 4
> ICH6: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
> Probing IDE interface ide0...
> hda: PLEXTOR DVDR PX-716A, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ACPI: No ACPI bus support for 0.0
> Probing IDE interface ide1...
> hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(66)
> Uniform CD-ROM driver Revision: 3.20
> libata version 1.10 loaded.
> ata_piix version 1.03
> ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225
> PCI: Setting latency timer of device 0000:00:1f.2 to 64
> ata1: SATA max UDMA/133 cmd 0xAC00 ctl 0xA882 bmdma 0xA400 irq 225
> ata2: SATA max UDMA/133 cmd 0xA800 ctl 0xA482 bmdma 0xA408 irq 225
> ata1: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
> 88:20ff
> ata1: dev 0 ATA, max UDMA7, 234493056 sectors: lba48
> ata1: dev 1 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
> 88:20ff
> ata1: dev 1 ATA, max UDMA7, 312581808 sectors: lba48
> ata1: dev 0 configured for UDMA/133
> ata1: dev 1 configured for UDMA/133
> scsi0 : ata_piix
> ata2: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
> 88:20ff
> ata2: dev 0 ATA, max UDMA7, 234493056 sectors: lba48
> ata2: dev 1 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
> 88:20ff
> ata2: dev 1 ATA, max UDMA7, 312581808 sectors: lba48
> ata2: dev 0 configured for UDMA/133
> ata2: dev 1 configured for UDMA/133
> scsi1 : ata_piix
> Vendor: ATA Model: SAMSUNG SP1213C Rev: SV10
> Type: Direct-Access ANSI SCSI revision: 05
> ACPI: No ACPI bus support for 0:0:0:0
> Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10
> Type: Direct-Access ANSI SCSI revision: 05
> ACPI: No ACPI bus support for 0:0:1:0
> Vendor: ATA Model: SAMSUNG SP1213C Rev: SV10
> Type: Direct-Access ANSI SCSI revision: 05
> ACPI: No ACPI bus support for 1:0:0:0
> Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10
> Type: Direct-Access ANSI SCSI revision: 05
> ACPI: No ACPI bus support for 1:0:1:0
> SCSI device sda: 234493056 512-byte hdwr sectors (120060 MB)
> SCSI device sda: drive cache: write back
> SCSI device sda: 234493056 512-byte hdwr sectors (120060 MB)
> SCSI device sda: drive cache: write back
> sda: sda1 sda2 < sda5 sda6 sda7 >
> Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
> SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
> SCSI device sdb: drive cache: write back
> SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
> SCSI device sdb: drive cache: write back
> sdb: sdb1 sdb2 < sdb5 >
> Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
> SCSI device sdc: 234493056 512-byte hdwr sectors (120060 MB)
> SCSI device sdc: drive cache: write back
> SCSI device sdc: 234493056 512-byte hdwr sectors (120060 MB)
> SCSI device sdc: drive cache: write back
> sdc: sdc1 sdc2 < sdc5 sdc6 >
> Attached scsi disk sdc at scsi1, channel 0, id 0, lun 0
> SCSI device sdd: 312581808 512-byte hdwr sectors (160042 MB)
> SCSI device sdd: drive cache: write back
> SCSI device sdd: 312581808 512-byte hdwr sectors (160042 MB)
> SCSI device sdd: drive cache: write back
> sdd: sdd1 sdd2 < sdd5 >
> Attached scsi disk sdd at scsi1, channel 0, id 1, lun 0
> Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
> Attached scsi generic sg1 at scsi0, channel 0, id 1, lun 0, type 0
> Attached scsi generic sg2 at scsi1, channel 0, id 0, lun 0, type 0
> Attached scsi generic sg3 at scsi1, channel 0, id 1, lun 0, type 0
> usbmon: debugs is not available
> ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
> PCI: Setting latency timer of device 0000:00:1d.7 to 64
> ehci_hcd 0000:00:1d.7: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
> Family) USB2 EHCI Controller
> ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
> ehci_hcd 0000:00:1d.7: irq 233, io mem 0xd2cff800
> PCI: cache line size of 128 is not supported by device 0000:00:1d.7
> ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
> ACPI: No ACPI bus support for usb1
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 8 ports detected
> ACPI: No ACPI bus support for 1-0:1.0
> USB Universal Host Controller Interface driver v2.2
> ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
> PCI: Setting latency timer of device 0000:00:1d.0 to 64
> uhci_hcd 0000:00:1d.0: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
> Family) USB UHCI #1
> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
> uhci_hcd 0000:00:1d.0: irq 233, io base 0x00009880
> ACPI: No ACPI bus support for usb2
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> ACPI: No ACPI bus support for 2-0:1.0
> ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225
> PCI: Setting latency timer of device 0000:00:1d.1 to 64
> uhci_hcd 0000:00:1d.1: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
> Family) USB UHCI #2
> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
> uhci_hcd 0000:00:1d.1: irq 225, io base 0x00009c00
> ACPI: No ACPI bus support for usb3
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> ACPI: No ACPI bus support for 3-0:1.0
> ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 217
> PCI: Setting latency timer of device 0000:00:1d.2 to 64
> uhci_hcd 0000:00:1d.2: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
> Family) USB UHCI #3
> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
> uhci_hcd 0000:00:1d.2: irq 217, io base 0x0000a000
> ACPI: No ACPI bus support for usb4
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> ACPI: No ACPI bus support for 4-0:1.0
> ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
> PCI: Setting latency timer of device 0000:00:1d.3 to 64
> uhci_hcd 0000:00:1d.3: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
> Family) USB UHCI #4
> uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
> uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000a080
> ACPI: No ACPI bus support for usb5
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 2 ports detected
> ACPI: No ACPI bus support for 5-0:1.0
> Initializing USB Mass Storage driver...
> usbcore: registered new driver usb-storage
> USB Mass Storage support registered.
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.01:USB HID core driver
> mice: PS/2 mouse device common for all mice
> md: linear personality registered as nr 1
> md: raid0 personality registered as nr 2
> md: raid1 personality registered as nr 3
> md: raid5 personality registered as nr 4
> raid5: automatically using best checksumming function: generic_sse
> generic_sse: 5116.000 MB/sec
> raid5: using function: generic_sse (5116.000 MB/sec)
> md: multipath personality registered as nr 7
> md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
> md: bitmap version 3.38
> Advanced Linux Sound Architecture Driver Version 1.0.9rc2 (Thu Mar 24
> 10:33:39 2005 UTC).
> ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
> PCI: Setting latency timer of device 0000:00:1b.0 to 64
> ALSA device list:
> #0: HDA Intel at 0xd2cf4000 irq 169
> NET: Registered protocol family 2
> IP: routing cache hash table of 4096 buckets, 64Kbytes
> TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 262144 bind 65536)
> ip_conntrack version 2.1 (4094 buckets, 32752 max) - 296 bytes per conntrack
> ip_tables: (C) 2000-2002 Netfilter core team
> ipt_recent v0.3.1: Stephen Frost <sfrost-vhD3WmCyG/PR7s880joybQ@public.gmane.org>.
> http://snowman.net/projects/ipt_recent/
> arp_tables: (C) 2002 David S. Miller
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> Testing NMI watchdog ... OK.
> ACPI wakeup devices:
> P0P1 P0P3 P0P4 P0P5 P0P6 P0P7 USB1 USB2 USB3 USB4 EUSB MC97
> ACPI: (supports S0 S1 S3 S4 S5)
> md: Autodetecting RAID arrays.
> usb 3-1: new low speed USB device using uhci_hcd and address 2
> md: autorun ...
> md: considering sdd5 ...
> md: adding sdd5 ...
> md: sdd1 has different UUID to sdd5
> md: sdc6 has different UUID to sdd5
> md: sdc5 has different UUID to sdd5
> md: adding sdb5 ...
> md: sdb1 has different UUID to sdd5
> md: sda6 has different UUID to sdd5
> md: sda5 has different UUID to sdd5
> md: created md3
> md: bind<sdb5>
> md: bind<sdd5>
> md: running: <sdd5><sdb5>
> raid1: raid set md3 active with 2 out of 2 mirrors
> md: considering sdd1 ...
> md: adding sdd1 ...
> md: adding sdc6 ...
> md: sdc5 has different UUID to sdd1
> md: adding sdb1 ...
> md: adding sda6 ...
> md: sda5 has different UUID to sdd1
> md: created md1
> md: bind<sda6>
> md: bind<sdb1>
> md: bind<sdc6>
> md: bind<sdd1>
> md: running: <sdd1><sdc6><sdb1><sda6>
> md1: setting max_sectors to 128, segment boundary to 32767
> raid0: looking at sdd1
> raid0: comparing sdd1(7325504) with sdd1(7325504)
> raid0: END
> raid0: ==> UNIQUE
> raid0: 1 zones
> raid0: looking at sdc6
> raid0: comparing sdc6(7325504) with sdd1(7325504)
> raid0: EQUAL
> raid0: looking at sdb1
> raid0: comparing sdb1(7325504) with sdd1(7325504)
> raid0: EQUAL
> raid0: looking at sda6
> raid0: comparing sda6(7325504) with sdd1(7325504)
> raid0: EQUAL
> raid0: FINAL 1 zones
> raid0: done.
> raid0 : md_size is 29302016 blocks.
> raid0 : conf->hash_spacing is 29302016 blocks.
> raid0 : nb_zone is 1.
> raid0 : Allocating 8 bytes for hash.
> md: considering sdc5 ...
> md: adding sdc5 ...
> md: adding sda5 ...
> md: created md0
> md: bind<sda5>
> md: bind<sdc5>
> md: running: <sdc5><sda5>
> md0: setting max_sectors to 128, segment boundary to 32767
> raid0: looking at sdc5
> raid0: comparing sdc5(30001280) with sdc5(30001280)
> raid0: END
> raid0: ==> UNIQUE
> raid0: 1 zones
> raid0: looking at sda5
> raid0: comparing sda5(30001280) with sdc5(30001280)
> raid0: EQUAL
> raid0: FINAL 1 zones
> raid0: done.
> raid0 : md_size is 60002560 blocks.
> raid0 : conf->hash_spacing is 60002560 blocks.
> raid0 : nb_zone is 1.
> raid0 : Allocating 8 bytes for hash.
> md: ... autorun DONE.
> UDF-fs: No partition found (1)
> XFS mounting filesystem md1
> ACPI: No ACPI bus support for 3-1
> Ending clean XFS mount for filesystem: md1
> VFS: Mounted root (xfs filesystem) readonly.
> Freeing unused kernel memory: 212k freed
> input: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on
> usb-0000:00:1d.1-1
> ACPI: No ACPI bus support for 3-1:1.0
> input: USB HID v1.10 Device [Logitech HID compliant keyboard] on
> usb-0000:00:1d.1-1
> ACPI: No ACPI bus support for 3-1:1.1
> usb 3-2: new low speed USB device using uhci_hcd and address 3
> ACPI: No ACPI bus support for 3-2
> input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
> usb-0000:00:1d.1-2
> ACPI: No ACPI bus support for 3-2:1.0
> 2.6.12-rc2 vanilla kernel:
>
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
> BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data)
> BIOS-e820: 000000003ffbe000 - 000000003fff0000 (ACPI NVS)
> BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
> ACPI: RSDP (v002 ACPIAM ) @
> 0x00000000000fafa0
> ACPI: XSDT (v001 A M I OEMXSDT 0x02000503 MSFT 0x00000097) @
> 0x000000003ffb0100
> ACPI: FADT (v003 A M I OEMFACP 0x02000503 MSFT 0x00000097) @
> 0x000000003ffb0290
> ACPI: MADT (v001 A M I OEMAPIC 0x02000503 MSFT 0x00000097) @
> 0x000000003ffb0390
> ACPI: OEMB (v001 A M I AMI_OEM 0x02000503 MSFT 0x00000097) @
> 0x000000003ffbe040
> ACPI: MCFG (v001 A M I OEMMCFG 0x02000503 MSFT 0x00000097) @
> 0x000000003ffb6c40
> ACPI: DSDT (v001 A0144 A0144000 0x00000000 INTL 0x02002026) @
> 0x0000000000000000
> On node 0 totalpages: 262064
> DMA zone: 4096 pages, LIFO batch:1
> Normal zone: 257968 pages, LIFO batch:16
> HighMem zone: 0 pages, LIFO batch:1
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> Processor #0 15:4 APIC version 16
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> Processor #1 15:4 APIC version 16
> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Setting APIC routing to flat
> Using ACPI (MADT) for SMP configuration information
> Built 1 zonelists
> Kernel command line: root=/dev/md1 vga=794 quiet console=tty0
> Initializing CPU#0
> PID hash table entries: 4096 (order: 12, 131072 bytes)
> time.c: Using 1.193182 MHz PIT timer.
> time.c: Detected 3527.425 MHz processor.
> Console: colour dummy device 80x25
> Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
> Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
> Memory: 1024944k/1048256k available (3249k kernel code, 22684k reserved,
> 1243k data, 208k init)
> Calibrating delay loop... 6963.20 BogoMIPS (lpj=3481600)
> Security Framework v1.0.0 initialized
> Capability LSM initialized
> Mount-cache hash table entries: 256
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 2048K
> using mwait in idle threads.
> CPU: Physical Processor ID: 0
> CPU0: Thermal monitoring enabled (TM1)
> Using IO APIC NMI watchdog
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 2048K
> CPU: Physical Processor ID: 0
> CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03
> Booting processor 1/1 rip 6000 rsp ffff81003ff17f58
> Initializing CPU#1
> Calibrating delay loop... 7045.12 BogoMIPS (lpj=3522560)
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 2048K
> CPU: Physical Processor ID: 0
> CPU1: Thermal monitoring enabled (TM1)
> Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03
> Total of 2 processors activated (14008.32 BogoMIPS).
> activating NMI Watchdog ... done.
> testing NMI watchdog ... CPU#1: NMI appears to be stuck (0)!
> Using local APIC timer interrupts.
> Detected 13.778 MHz APIC timer.
> checking TSC synchronization across 2 CPUs: passed.
> time.c: Using PIT/TSC based timekeeping.
> Brought up 2 CPUs
> CPU0 attaching sched-domain:
> domain 0: span 3
> groups: 1 2
> domain 1: span 3
> groups: 3
> CPU1 attaching sched-domain:
> domain 0: span 3
> groups: 2 1
> domain 1: span 3
> groups: 3
> NET: Registered protocol family 16
> PCI: Using configuration type 1
> PCI: Using MMCONFIG at e0000000
> mtrr: v2.0 (20020519)
> ACPI: Subsystem revision 20050309
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Probing PCI hardware (bus 00)
> PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
> Boot video device is 0000:04:00.0
> PCI: Transparent bridge - 0000:00:1e.0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
> disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
> disabled.
> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> pnp: PnP ACPI: found 12 devices
> SCSI subsystem initialized
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
> report
> pnp: 00:06: ioport range 0x290-0x297 has been reserved
> IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
> inotify device minor=63
> SGI XFS with large block/inode numbers, no debug enabled
> Initializing Cryptographic API
> ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
> PCI: Setting latency timer of device 0000:00:01.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[pcie00]
> Allocate Port Service[pcie03]
> ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
> PCI: Setting latency timer of device 0000:00:1c.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[pcie00]
> Allocate Port Service[pcie02]
> Allocate Port Service[pcie03]
> ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 201
> PCI: Setting latency timer of device 0000:00:1c.1 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[pcie00]
> Allocate Port Service[pcie02]
> Allocate Port Service[pcie03]
> vesafb: framebuffer at 0xd8000000, mapped to 0xffffc20010100000, using
> 5120k, total 131072k
> vesafb: mode is 1280x1024x16, linelength=2560, pages=1
> vesafb: scrolling: redraw
> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
> Console: switching to colour frame buffer device 160x64
> fb0: VESA VGA frame buffer device
> fb1: Virtual frame buffer device, using 1024K of video memory
> ACPI: Processor [CPU1] (supports 8 throttling states)
> Real Time Clock Driver v1.12
> io scheduler noop registered
> io scheduler cfq registered
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> RAMDISK driver initialized: 4 RAM disks of 4096K size 1024 blocksize
> loop: loaded (max 8 devices)
> ub: sizeof ub_scsi_cmd 88 ub_dev 2680
> usbcore: registered new driver ub
> ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 201
> sk98lin: Network Device Driver v8.15.1.3
> (C)Copyright 1999-2005 Marvell(R).
> ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 201
> PCI: Setting latency timer of device 0000:02:00.0 to 64
> eth0: Marvell Yukon 88E8053 Gigabit Ethernet Controller
> PrefPort:A RlmtMode:Check Link State
> netconsole: not configured, aborting
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> ICH6: IDE controller at PCI slot 0000:00:1f.1
> ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 217
> ICH6: chipset revision 4
> ICH6: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
> Probing IDE interface ide0...
> hda: PLEXTOR DVDR PX-716A, ATAPI CD/DVD-ROM drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Probing IDE interface ide1...
> hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(66)
> Uniform CD-ROM driver Revision: 3.20
> libata version 1.10 loaded.
> ata_piix version 1.03
> ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225
> PCI: Setting latency timer of device 0000:00:1f.2 to 64
> ata1: SATA max UDMA/133 cmd 0xAC00 ctl 0xA882 bmdma 0xA400 irq 225
> ata2: SATA max UDMA/133 cmd 0xA800 ctl 0xA482 bmdma 0xA408 irq 225
> ata1: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
> 88:20ff
> ata1: dev 0 ATA, max UDMA7, 234493056 sectors: lba48
> ata1: dev 1 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
> 88:20ff
> ata1: dev 1 ATA, max UDMA7, 312581808 sectors: lba48
> ata1: dev 0 configured for UDMA/133
> ata1: dev 1 configured for UDMA/133
> scsi0 : ata_piix
> ata2: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
> 88:20ff
> ata2: dev 0 ATA, max UDMA7, 234493056 sectors: lba48
> ata2: dev 1 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
> 88:20ff
> ata2: dev 1 ATA, max UDMA7, 312581808 sectors: lba48
> ata2: dev 0 configured for UDMA/133
> ata2: dev 1 configured for UDMA/133
> scsi1 : ata_piix
> Vendor: ATA Model: SAMSUNG SP1213C Rev: SV10
> Type: Direct-Access ANSI SCSI revision: 05
> Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10
> Type: Direct-Access ANSI SCSI revision: 05
> Vendor: ATA Model: SAMSUNG SP1213C Rev: SV10
> Type: Direct-Access ANSI SCSI revision: 05
> Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10
> Type: Direct-Access ANSI SCSI revision: 05
> SCSI device sda: 234493056 512-byte hdwr sectors (120060 MB)
> SCSI device sda: drive cache: write back
> SCSI device sda: 234493056 512-byte hdwr sectors (120060 MB)
> SCSI device sda: drive cache: write back
> sda: sda1 sda2 < sda5 sda6 sda7 >
> Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
> SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
> SCSI device sdb: drive cache: write back
> SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
> SCSI device sdb: drive cache: write back
> sdb: sdb1 sdb2 < sdb5 >
> Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
> SCSI device sdc: 234493056 512-byte hdwr sectors (120060 MB)
> SCSI device sdc: drive cache: write back
> SCSI device sdc: 234493056 512-byte hdwr sectors (120060 MB)
> SCSI device sdc: drive cache: write back
> sdc: sdc1 sdc2 < sdc5 sdc6 >
> Attached scsi disk sdc at scsi1, channel 0, id 0, lun 0
> SCSI device sdd: 312581808 512-byte hdwr sectors (160042 MB)
> SCSI device sdd: drive cache: write back
> SCSI device sdd: 312581808 512-byte hdwr sectors (160042 MB)
> SCSI device sdd: drive cache: write back
> sdd: sdd1 sdd2 < sdd5 >
> Attached scsi disk sdd at scsi1, channel 0, id 1, lun 0
> Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
> Attached scsi generic sg1 at scsi0, channel 0, id 1, lun 0, type 0
> Attached scsi generic sg2 at scsi1, channel 0, id 0, lun 0, type 0
> Attached scsi generic sg3 at scsi1, channel 0, id 1, lun 0, type 0
> usbmon: debugs is not available
> ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
> PCI: Setting latency timer of device 0000:00:1d.7 to 64
> ehci_hcd 0000:00:1d.7: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
> Family) USB2 EHCI Controller
> ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
> ehci_hcd 0000:00:1d.7: irq 233, io mem 0xd2cff800
> PCI: cache line size of 128 is not supported by device 0000:00:1d.7
> ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 8 ports detected
> USB Universal Host Controller Interface driver v2.2
> ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
> PCI: Setting latency timer of device 0000:00:1d.0 to 64
> uhci_hcd 0000:00:1d.0: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
> Family) USB UHCI #1
> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
> uhci_hcd 0000:00:1d.0: irq 233, io base 0x00009880
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225
> PCI: Setting latency timer of device 0000:00:1d.1 to 64
> uhci_hcd 0000:00:1d.1: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
> Family) USB UHCI #2
> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
> uhci_hcd 0000:00:1d.1: irq 225, io base 0x00009c00
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 217
> PCI: Setting latency timer of device 0000:00:1d.2 to 64
> uhci_hcd 0000:00:1d.2: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
> Family) USB UHCI #3
> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
> uhci_hcd 0000:00:1d.2: irq 217, io base 0x0000a000
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
> PCI: Setting latency timer of device 0000:00:1d.3 to 64
> uhci_hcd 0000:00:1d.3: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
> Family) USB UHCI #4
> uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
> uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000a080
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 2 ports detected
> Initializing USB Mass Storage driver...
> usbcore: registered new driver usb-storage
> USB Mass Storage support registered.
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.01:USB HID core driver
> mice: PS/2 mouse device common for all mice
> md: linear personality registered as nr 1
> md: raid0 personality registered as nr 2
> md: raid1 personality registered as nr 3
> md: raid5 personality registered as nr 4
> raid5: automatically using best checksumming function: generic_sse
> generic_sse: 5108.000 MB/sec
> raid5: using function: generic_sse (5108.000 MB/sec)
> md: multipath personality registered as nr 7
> md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
> Advanced Linux Sound Architecture Driver Version 1.0.9rc2 (Thu Mar 24
> 10:33:39 2005 UTC).
> ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
> PCI: Setting latency timer of device 0000:00:1b.0 to 64
> ALSA device list:
> #0: HDA Intel at 0xd2cf4000 irq 169
> NET: Registered protocol family 2
> IP: routing cache hash table of 4096 buckets, 64Kbytes
> TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 262144 bind 65536)
> ip_conntrack version 2.1 (4094 buckets, 32752 max) - 304 bytes per conntrack
> ip_tables: (C) 2000-2002 Netfilter core team
> ipt_recent v0.3.1: Stephen Frost <sfrost-vhD3WmCyG/PR7s880joybQ@public.gmane.org>.
> http://snowman.net/projects/ipt_recent/
> arp_tables: (C) 2002 David S. Miller
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> ACPI wakeup devices:
> P0P1 P0P3 P0P4 P0P5 P0P6 P0P7 USB1 USB2 USB3 USB4 EUSB MC97
> ACPI: (supports S0 S1 S3 S4 S5)
> md: Autodetecting RAID arrays.
> usb 3-1: new low speed USB device using uhci_hcd and address 2
> md: autorun ...
> md: considering sdd5 ...
> md: adding sdd5 ...
> md: sdd1 has different UUID to sdd5
> md: sdc6 has different UUID to sdd5
> md: sdc5 has different UUID to sdd5
> md: adding sdb5 ...
> md: sdb1 has different UUID to sdd5
> md: sda6 has different UUID to sdd5
> md: sda5 has different UUID to sdd5
> md: created md3
> md: bind<sdb5>
> md: bind<sdd5>
> md: running: <sdd5><sdb5>
> raid1: raid set md3 active with 2 out of 2 mirrors
> md: considering sdd1 ...
> md: adding sdd1 ...
> md: adding sdc6 ...
> md: sdc5 has different UUID to sdd1
> md: adding sdb1 ...
> md: adding sda6 ...
> md: sda5 has different UUID to sdd1
> md: created md1
> md: bind<sda6>
> md: bind<sdb1>
> md: bind<sdc6>
> md: bind<sdd1>
> md: running: <sdd1><sdc6><sdb1><sda6>
> md1: setting max_sectors to 128, segment boundary to 32767
> raid0: looking at sdd1
> raid0: comparing sdd1(7325504) with sdd1(7325504)
> raid0: END
> raid0: ==> UNIQUE
> raid0: 1 zones
> raid0: looking at sdc6
> raid0: comparing sdc6(7325504) with sdd1(7325504)
> raid0: EQUAL
> raid0: looking at sdb1
> raid0: comparing sdb1(7325504) with sdd1(7325504)
> raid0: EQUAL
> raid0: looking at sda6
> raid0: comparing sda6(7325504) with sdd1(7325504)
> raid0: EQUAL
> raid0: FINAL 1 zones
> raid0: done.
> raid0 : md_size is 29302016 blocks.
> raid0 : conf->hash_spacing is 29302016 blocks.
> raid0 : nb_zone is 1.
> raid0 : Allocating 8 bytes for hash.
> md: considering sdc5 ...
> md: adding sdc5 ...
> md: adding sda5 ...
> md: created md0
> md: bind<sda5>
> md: bind<sdc5>
> md: running: <sdc5><sda5>
> md0: setting max_sectors to 128, segment boundary to 32767
> raid0: looking at sdc5
> raid0: comparing sdc5(30001280) with sdc5(30001280)
> raid0: END
> raid0: ==> UNIQUE
> raid0: 1 zones
> raid0: looking at sda5
> raid0: comparing sda5(30001280) with sdc5(30001280)
> raid0: EQUAL
> raid0: FINAL 1 zones
> raid0: done.
> raid0 : md_size is 60002560 blocks.
> raid0 : conf->hash_spacing is 60002560 blocks.
> raid0 : nb_zone is 1.
> raid0 : Allocating 8 bytes for hash.
> md: ... autorun DONE.
> UDF-fs: No partition found (1)
> XFS mounting filesystem md1
> Ending clean XFS mount for filesystem: md1
> VFS: Mounted root (xfs filesystem) readonly.
> Freeing unused kernel memory: 208k freed
> input: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on
> usb-0000:00:1d.1-1
> input: USB HID v1.10 Device [Logitech HID compliant keyboard] on
> usb-0000:00:1d.1-1
> usb 3-2: new low speed USB device using uhci_hcd and address 3
> input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
> usb-0000:00:1d.1-2
> nvidia: module license 'NVIDIA' taints kernel.
> ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 169
> PCI: Setting latency timer of device 0000:04:00.0 to 64
>
>
> -------------------------------------------------------
> SF email is sponsored by - The IT Product Guide
> Read honest & candid reviews on hundreds of IT Products from real users.
> Discover which products truly live up to the hype. Start reading now.
> http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
> _______________________________________________
> Acpi-devel mailing list
> Acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> https://lists.sourceforge.net/lists/listinfo/acpi-devel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Fw: Re: 2.6.12-rc2-mm2
[not found] ` <20050408092947.41175d63.akpm-3NddpPZAyC0@public.gmane.org>
2005-04-08 21:16 ` Bjorn Helgaas
@ 2005-04-08 22:37 ` Michael Thonke
[not found] ` <425707A2.2050208-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
1 sibling, 1 reply; 5+ messages in thread
From: Michael Thonke @ 2005-04-08 22:37 UTC (permalink / raw)
To: Andrew Morton
Cc: Brown, Len, acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f,
bjorn.helgaas-VXdhtT5mjnY
Hi Andrew and Bjorn,
but whats so different that causes some PCI-E cards to get not regonized
or working at all?
I mean 2.6.11.x works and 2.6.12-rc2 works,while 2.6.12-rc1 was like
mm-behavior with
ACPI: Can't get handler for
I know that the driver of sk98lin loads but after a 1min it stops working,
also the Nvidia PCI-e 6600GT not working over an minute.
As far as I can I'm willing to help and test fixes for that. It's really
courios from what I see with vanilla and mm-tree.
Thanks for help and the fast answers.
Best regards
Michael
|Andrew Morton schrieb:
>I assume this problem is related to that "No ACPI bus support"
>message, which is new in bk-acpi.patch.
>
>
>
>Begin forwarded message:
>
>Date: Fri, 08 Apr 2005 14:02:12 +0200
>From: Michael Thonke <iogl64nx-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>To: Andrew Morton <akpm-3NddpPZAyC0@public.gmane.org>
>Subject: Re: 2.6.12-rc2-mm2
>
>
>Hello Andrew,
>
>Im sorry if this mail is a double post.I randomly get mails from lkml.org with the warning
>I posted a virus or something...
>
>Along the 2.6.12-rcX-mmX PCI-Express is not usable at all with
>mm-patchsets. I posted some days ago the problem taht
>the IRQs get not regonized by the kernel also with pci=routeirq nothing
>helped.The problem still the same and some new problems now with
>2.6.12-rc2-mm2 in addition.
>
>This computer has an Intel Pentium 4 630 with HT,EIST and EMT64 enabled.
>In 2.6.12-rc2 everything works perfect.
>So I post my dmesg output maybe you can see some interesting things
>there. I hope you'll find the issue or bug..whatever hope that
>its possible to sort the problems out.
>
>Thanks in Advanced
>
>Now I post the 2.6.12-rc2-mm2 and after that the 2.6.12-rc2 vanilla
>kernel output
>
>2.6.12-rc2-mm2 output:
>
>Bootdata ok (command line is root=/dev/md1 vga=794 quiet)
>Linux version 2.6.12-rc2-mm2-md1 (root@ioGL64NX) (gcc-Version 3.4.3
>20041125 (Gentoo Linux 3.4.3-r1, ssp-3.4.3-0, pie-8.7.7)) #2 SMP PREEMPT
>Fri Apr 8 13:35:42 CEST 2005
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
> BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data)
> BIOS-e820: 000000003ffbe000 - 000000003fff0000 (ACPI NVS)
> BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>ACPI: RSDP (v002 ACPIAM ) @
>0x00000000000fafa0
>ACPI: XSDT (v001 A M I OEMXSDT 0x02000503 MSFT 0x00000097) @
>0x000000003ffb0100
>ACPI: FADT (v003 A M I OEMFACP 0x02000503 MSFT 0x00000097) @
>0x000000003ffb0290
>ACPI: MADT (v001 A M I OEMAPIC 0x02000503 MSFT 0x00000097) @
>0x000000003ffb0390
>ACPI: OEMB (v001 A M I AMI_OEM 0x02000503 MSFT 0x00000097) @
>0x000000003ffbe040
>ACPI: MCFG (v001 A M I OEMMCFG 0x02000503 MSFT 0x00000097) @
>0x000000003ffb6c40
>ACPI: DSDT (v001 A0144 A0144000 0x00000000 INTL 0x02002026) @
>0x0000000000000000
>On node 0 totalpages: 262064
> DMA zone: 4096 pages, LIFO batch:1
> Normal zone: 257968 pages, LIFO batch:16
> HighMem zone: 0 pages, LIFO batch:1
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 16
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:4 APIC version 16
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 40000000 (gap: 40000000:bfb00000)
>Built 1 zonelists
>Initializing CPU#0
>Kernel command line: root=/dev/md1 vga=794 quiet console=tty0
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time.c: Using 1.193182 MHz PIT timer.
>time.c: Detected 3527.408 MHz processor.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Memory: 1024964k/1048256k available (3240k kernel code, 22664k reserved,
>1218k data, 212k init)
>Calibrating delay loop... 6963.20 BogoMIPS (lpj=3481600)
>Security Framework v1.0.0 initialized
>Capability LSM initialized
>Mount-cache hash table entries: 256
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU0: Thermal monitoring enabled (TM1)
>Using IO APIC NMI watchdog
>activating NMI Watchdog ... done.
>Using local APIC timer interrupts.
>Detected 13.778 MHz APIC timer.
>Booting processor 1/1 rip 6000 rsp ffff81003ff35f58
>Initializing CPU#1
>Calibrating delay loop... 7045.12 BogoMIPS (lpj=3522560)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU1: Thermal monitoring enabled (TM1)
> Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03
>Synced TSC of CPU 1 difference 107374180328
>APIC error on CPU1: 00(40)
>Brought up 2 CPUs
>time.c: Using PIT/TSC based timekeeping.
>CPU0 attaching sched-domain:
> domain 0: span 3
> groups: 1 2
>CPU1 attaching sched-domain:
> domain 0: span 3
> groups: 2 1
>NET: Registered protocol family 16
>PCI: Using configuration type 1
>PCI: Using MMCONFIG at e0000000
>mtrr: v2.0 (20020519)
>ACPI: Subsystem revision 20050309
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Boot video device is 0000:04:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: Can't get handler for 0000:00:1b.0
>ACPI: Can't get handler for 0000:00:1f.3
>ACPI: Can't get handler for 0000:04:00.0
>ACPI: Can't get handler for 0000:02:00.0
>ACPI: Can't get handler for 0000:01:09.0
>ACPI: Can't get handler for 0000:01:0a.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
>disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
>disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: No ACPI bus support for 00:00
>ACPI: No ACPI bus support for 00:01
>ACPI: No ACPI bus support for 00:02
>ACPI: No ACPI bus support for 00:03
>ACPI: No ACPI bus support for 00:04
>ACPI: No ACPI bus support for 00:05
>ACPI: No ACPI bus support for 00:06
>ACPI: No ACPI bus support for 00:07
>ACPI: No ACPI bus support for 00:08
>ACPI: No ACPI bus support for 00:09
>ACPI: No ACPI bus support for 00:0a
>ACPI: No ACPI bus support for 00:0b
>pnp: PnP ACPI: found 12 devices
>SCSI subsystem initialized
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
>report
>pnp: 00:06: ioport range 0x290-0x297 has been reserved
>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>inotify device minor=63
>SGI XFS with large block/inode numbers, no debug enabled
>Initializing Cryptographic API
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>ACPI: No ACPI bus support for pcie00
>Allocate Port Service[pcie03]
>ACPI: No ACPI bus support for pcie03
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>ACPI: No ACPI bus support for pcie00
>Allocate Port Service[pcie02]
>ACPI: No ACPI bus support for pcie02
>Allocate Port Service[pcie03]
>ACPI: No ACPI bus support for pcie03
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>ACPI: No ACPI bus support for pcie00
>Allocate Port Service[pcie02]
>ACPI: No ACPI bus support for pcie02
>Allocate Port Service[pcie03]
>ACPI: No ACPI bus support for pcie03
>vesafb: framebuffer at 0xd8000000, mapped to 0xffffc20010100000, using
>5120k, total 131072k
>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 160x64
>fb0: VESA VGA frame buffer device
>ACPI: No ACPI bus support for vesafb.0
>fb1: Virtual frame buffer device, using 1024K of video memory
>ACPI: No ACPI bus support for vfb.0
>ACPI: CPU0 (power states: C1[C1])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: CPU1 (power states: C1[C1])
>Real Time Clock Driver v1.12
>io scheduler noop registered
>io scheduler cfq registered
>ACPI: Floppy Controller [FDC] at I/O 0x3f0-0x3f5, 0x3f7 irq 6 dma channel 2
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>ACPI: No ACPI bus support for floppy.0
>RAMDISK driver initialized: 4 RAM disks of 4096K size 1024 blocksize
>loop: loaded (max 8 devices)
>ub: sizeof ub_scsi_cmd 88 ub_dev 2672
>usbcore: registered new driver ub
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 201
>sk98lin: Network Device Driver v8.15.1.3
>(C)Copyright 1999-2005 Marvell(R).
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>eth0: Marvell Yukon 88E8053 Gigabit Ethernet Controller
> PrefPort:A RlmtMode:Check Link State
>netconsole: not configured, aborting
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH6: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 217
>ICH6: chipset revision 4
>ICH6: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: PLEXTOR DVDR PX-716A, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ACPI: No ACPI bus support for 0.0
>Probing IDE interface ide1...
>hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(66)
>Uniform CD-ROM driver Revision: 3.20
>libata version 1.10 loaded.
>ata_piix version 1.03
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0xAC00 ctl 0xA882 bmdma 0xA400 irq 225
>ata2: SATA max UDMA/133 cmd 0xA800 ctl 0xA482 bmdma 0xA408 irq 225
>ata1: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
>88:20ff
>ata1: dev 0 ATA, max UDMA7, 234493056 sectors: lba48
>ata1: dev 1 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
>88:20ff
>ata1: dev 1 ATA, max UDMA7, 312581808 sectors: lba48
>ata1: dev 0 configured for UDMA/133
>ata1: dev 1 configured for UDMA/133
>scsi0 : ata_piix
>ata2: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
>88:20ff
>ata2: dev 0 ATA, max UDMA7, 234493056 sectors: lba48
>ata2: dev 1 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
>88:20ff
>ata2: dev 1 ATA, max UDMA7, 312581808 sectors: lba48
>ata2: dev 0 configured for UDMA/133
>ata2: dev 1 configured for UDMA/133
>scsi1 : ata_piix
> Vendor: ATA Model: SAMSUNG SP1213C Rev: SV10
> Type: Direct-Access ANSI SCSI revision: 05
>ACPI: No ACPI bus support for 0:0:0:0
> Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10
> Type: Direct-Access ANSI SCSI revision: 05
>ACPI: No ACPI bus support for 0:0:1:0
> Vendor: ATA Model: SAMSUNG SP1213C Rev: SV10
> Type: Direct-Access ANSI SCSI revision: 05
>ACPI: No ACPI bus support for 1:0:0:0
> Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10
> Type: Direct-Access ANSI SCSI revision: 05
>ACPI: No ACPI bus support for 1:0:1:0
>SCSI device sda: 234493056 512-byte hdwr sectors (120060 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 234493056 512-byte hdwr sectors (120060 MB)
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 < sda5 sda6 sda7 >
>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>SCSI device sdb: drive cache: write back
>SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>SCSI device sdb: drive cache: write back
> sdb: sdb1 sdb2 < sdb5 >
>Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
>SCSI device sdc: 234493056 512-byte hdwr sectors (120060 MB)
>SCSI device sdc: drive cache: write back
>SCSI device sdc: 234493056 512-byte hdwr sectors (120060 MB)
>SCSI device sdc: drive cache: write back
> sdc: sdc1 sdc2 < sdc5 sdc6 >
>Attached scsi disk sdc at scsi1, channel 0, id 0, lun 0
>SCSI device sdd: 312581808 512-byte hdwr sectors (160042 MB)
>SCSI device sdd: drive cache: write back
>SCSI device sdd: 312581808 512-byte hdwr sectors (160042 MB)
>SCSI device sdd: drive cache: write back
> sdd: sdd1 sdd2 < sdd5 >
>Attached scsi disk sdd at scsi1, channel 0, id 1, lun 0
>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
>Attached scsi generic sg1 at scsi0, channel 0, id 1, lun 0, type 0
>Attached scsi generic sg2 at scsi1, channel 0, id 0, lun 0, type 0
>Attached scsi generic sg3 at scsi1, channel 0, id 1, lun 0, type 0
>usbmon: debugs is not available
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
>Family) USB2 EHCI Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: irq 233, io mem 0xd2cff800
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>ACPI: No ACPI bus support for usb1
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>ACPI: No ACPI bus support for 1-0:1.0
>USB Universal Host Controller Interface driver v2.2
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
>Family) USB UHCI #1
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 233, io base 0x00009880
>ACPI: No ACPI bus support for usb2
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: No ACPI bus support for 2-0:1.0
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
>Family) USB UHCI #2
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 225, io base 0x00009c00
>ACPI: No ACPI bus support for usb3
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: No ACPI bus support for 3-0:1.0
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 217
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
>Family) USB UHCI #3
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 217, io base 0x0000a000
>ACPI: No ACPI bus support for usb4
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: No ACPI bus support for 4-0:1.0
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
>Family) USB UHCI #4
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000a080
>ACPI: No ACPI bus support for usb5
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ACPI: No ACPI bus support for 5-0:1.0
>Initializing USB Mass Storage driver...
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>mice: PS/2 mouse device common for all mice
>md: linear personality registered as nr 1
>md: raid0 personality registered as nr 2
>md: raid1 personality registered as nr 3
>md: raid5 personality registered as nr 4
>raid5: automatically using best checksumming function: generic_sse
> generic_sse: 5116.000 MB/sec
>raid5: using function: generic_sse (5116.000 MB/sec)
>md: multipath personality registered as nr 7
>md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 3.38
>Advanced Linux Sound Architecture Driver Version 1.0.9rc2 (Thu Mar 24
>10:33:39 2005 UTC).
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ALSA device list:
> #0: HDA Intel at 0xd2cf4000 irq 169
>NET: Registered protocol family 2
>IP: routing cache hash table of 4096 buckets, 64Kbytes
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>ip_conntrack version 2.1 (4094 buckets, 32752 max) - 296 bytes per conntrack
>ip_tables: (C) 2000-2002 Netfilter core team
>ipt_recent v0.3.1: Stephen Frost <sfrost-vhD3WmCyG/PR7s880joybQ@public.gmane.org>.
>http://snowman.net/projects/ipt_recent/
>arp_tables: (C) 2002 David S. Miller
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Testing NMI watchdog ... OK.
>ACPI wakeup devices:
>P0P1 P0P3 P0P4 P0P5 P0P6 P0P7 USB1 USB2 USB3 USB4 EUSB MC97
>ACPI: (supports S0 S1 S3 S4 S5)
>md: Autodetecting RAID arrays.
>usb 3-1: new low speed USB device using uhci_hcd and address 2
>md: autorun ...
>md: considering sdd5 ...
>md: adding sdd5 ...
>md: sdd1 has different UUID to sdd5
>md: sdc6 has different UUID to sdd5
>md: sdc5 has different UUID to sdd5
>md: adding sdb5 ...
>md: sdb1 has different UUID to sdd5
>md: sda6 has different UUID to sdd5
>md: sda5 has different UUID to sdd5
>md: created md3
>md: bind<sdb5>
>md: bind<sdd5>
>md: running: <sdd5><sdb5>
>raid1: raid set md3 active with 2 out of 2 mirrors
>md: considering sdd1 ...
>md: adding sdd1 ...
>md: adding sdc6 ...
>md: sdc5 has different UUID to sdd1
>md: adding sdb1 ...
>md: adding sda6 ...
>md: sda5 has different UUID to sdd1
>md: created md1
>md: bind<sda6>
>md: bind<sdb1>
>md: bind<sdc6>
>md: bind<sdd1>
>md: running: <sdd1><sdc6><sdb1><sda6>
>md1: setting max_sectors to 128, segment boundary to 32767
>raid0: looking at sdd1
>raid0: comparing sdd1(7325504) with sdd1(7325504)
>raid0: END
>raid0: ==> UNIQUE
>raid0: 1 zones
>raid0: looking at sdc6
>raid0: comparing sdc6(7325504) with sdd1(7325504)
>raid0: EQUAL
>raid0: looking at sdb1
>raid0: comparing sdb1(7325504) with sdd1(7325504)
>raid0: EQUAL
>raid0: looking at sda6
>raid0: comparing sda6(7325504) with sdd1(7325504)
>raid0: EQUAL
>raid0: FINAL 1 zones
>raid0: done.
>raid0 : md_size is 29302016 blocks.
>raid0 : conf->hash_spacing is 29302016 blocks.
>raid0 : nb_zone is 1.
>raid0 : Allocating 8 bytes for hash.
>md: considering sdc5 ...
>md: adding sdc5 ...
>md: adding sda5 ...
>md: created md0
>md: bind<sda5>
>md: bind<sdc5>
>md: running: <sdc5><sda5>
>md0: setting max_sectors to 128, segment boundary to 32767
>raid0: looking at sdc5
>raid0: comparing sdc5(30001280) with sdc5(30001280)
>raid0: END
>raid0: ==> UNIQUE
>raid0: 1 zones
>raid0: looking at sda5
>raid0: comparing sda5(30001280) with sdc5(30001280)
>raid0: EQUAL
>raid0: FINAL 1 zones
>raid0: done.
>raid0 : md_size is 60002560 blocks.
>raid0 : conf->hash_spacing is 60002560 blocks.
>raid0 : nb_zone is 1.
>raid0 : Allocating 8 bytes for hash.
>md: ... autorun DONE.
>UDF-fs: No partition found (1)
>XFS mounting filesystem md1
>ACPI: No ACPI bus support for 3-1
>Ending clean XFS mount for filesystem: md1
>VFS: Mounted root (xfs filesystem) readonly.
>Freeing unused kernel memory: 212k freed
>input: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on
>usb-0000:00:1d.1-1
>ACPI: No ACPI bus support for 3-1:1.0
>input: USB HID v1.10 Device [Logitech HID compliant keyboard] on
>usb-0000:00:1d.1-1
>ACPI: No ACPI bus support for 3-1:1.1
>usb 3-2: new low speed USB device using uhci_hcd and address 3
>ACPI: No ACPI bus support for 3-2
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
>usb-0000:00:1d.1-2
>ACPI: No ACPI bus support for 3-2:1.0
>2.6.12-rc2 vanilla kernel:
>
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
> BIOS-e820: 000000003ffb0000 - 000000003ffbe000 (ACPI data)
> BIOS-e820: 000000003ffbe000 - 000000003fff0000 (ACPI NVS)
> BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>ACPI: RSDP (v002 ACPIAM ) @
>0x00000000000fafa0
>ACPI: XSDT (v001 A M I OEMXSDT 0x02000503 MSFT 0x00000097) @
>0x000000003ffb0100
>ACPI: FADT (v003 A M I OEMFACP 0x02000503 MSFT 0x00000097) @
>0x000000003ffb0290
>ACPI: MADT (v001 A M I OEMAPIC 0x02000503 MSFT 0x00000097) @
>0x000000003ffb0390
>ACPI: OEMB (v001 A M I AMI_OEM 0x02000503 MSFT 0x00000097) @
>0x000000003ffbe040
>ACPI: MCFG (v001 A M I OEMMCFG 0x02000503 MSFT 0x00000097) @
>0x000000003ffb6c40
>ACPI: DSDT (v001 A0144 A0144000 0x00000000 INTL 0x02002026) @
>0x0000000000000000
>On node 0 totalpages: 262064
> DMA zone: 4096 pages, LIFO batch:1
> Normal zone: 257968 pages, LIFO batch:16
> HighMem zone: 0 pages, LIFO batch:1
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 16
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:4 APIC version 16
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to flat
>Using ACPI (MADT) for SMP configuration information
>Built 1 zonelists
>Kernel command line: root=/dev/md1 vga=794 quiet console=tty0
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 131072 bytes)
>time.c: Using 1.193182 MHz PIT timer.
>time.c: Detected 3527.425 MHz processor.
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Memory: 1024944k/1048256k available (3249k kernel code, 22684k reserved,
>1243k data, 208k init)
>Calibrating delay loop... 6963.20 BogoMIPS (lpj=3481600)
>Security Framework v1.0.0 initialized
>Capability LSM initialized
>Mount-cache hash table entries: 256
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU0: Thermal monitoring enabled (TM1)
>Using IO APIC NMI watchdog
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03
>Booting processor 1/1 rip 6000 rsp ffff81003ff17f58
>Initializing CPU#1
>Calibrating delay loop... 7045.12 BogoMIPS (lpj=3522560)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU1: Thermal monitoring enabled (TM1)
> Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03
>Total of 2 processors activated (14008.32 BogoMIPS).
>activating NMI Watchdog ... done.
>testing NMI watchdog ... CPU#1: NMI appears to be stuck (0)!
>Using local APIC timer interrupts.
>Detected 13.778 MHz APIC timer.
>checking TSC synchronization across 2 CPUs: passed.
>time.c: Using PIT/TSC based timekeeping.
>Brought up 2 CPUs
>CPU0 attaching sched-domain:
> domain 0: span 3
> groups: 1 2
> domain 1: span 3
> groups: 3
>CPU1 attaching sched-domain:
> domain 0: span 3
> groups: 2 1
> domain 1: span 3
> groups: 3
>NET: Registered protocol family 16
>PCI: Using configuration type 1
>PCI: Using MMCONFIG at e0000000
>mtrr: v2.0 (20020519)
>ACPI: Subsystem revision 20050309
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Boot video device is 0000:04:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
>disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0,
>disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>SCSI subsystem initialized
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
>report
>pnp: 00:06: ioport range 0x290-0x297 has been reserved
>IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
>inotify device minor=63
>SGI XFS with large block/inode numbers, no debug enabled
>Initializing Cryptographic API
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>Allocate Port Service[pcie03]
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>Allocate Port Service[pcie02]
>Allocate Port Service[pcie03]
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[pcie00]
>Allocate Port Service[pcie02]
>Allocate Port Service[pcie03]
>vesafb: framebuffer at 0xd8000000, mapped to 0xffffc20010100000, using
>5120k, total 131072k
>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 160x64
>fb0: VESA VGA frame buffer device
>fb1: Virtual frame buffer device, using 1024K of video memory
>ACPI: Processor [CPU1] (supports 8 throttling states)
>Real Time Clock Driver v1.12
>io scheduler noop registered
>io scheduler cfq registered
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>RAMDISK driver initialized: 4 RAM disks of 4096K size 1024 blocksize
>loop: loaded (max 8 devices)
>ub: sizeof ub_scsi_cmd 88 ub_dev 2680
>usbcore: registered new driver ub
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 201
>sk98lin: Network Device Driver v8.15.1.3
>(C)Copyright 1999-2005 Marvell(R).
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 201
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>eth0: Marvell Yukon 88E8053 Gigabit Ethernet Controller
> PrefPort:A RlmtMode:Check Link State
>netconsole: not configured, aborting
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH6: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 217
>ICH6: chipset revision 4
>ICH6: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: PLEXTOR DVDR PX-716A, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(66)
>Uniform CD-ROM driver Revision: 3.20
>libata version 1.10 loaded.
>ata_piix version 1.03
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0xAC00 ctl 0xA882 bmdma 0xA400 irq 225
>ata2: SATA max UDMA/133 cmd 0xA800 ctl 0xA482 bmdma 0xA408 irq 225
>ata1: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
>88:20ff
>ata1: dev 0 ATA, max UDMA7, 234493056 sectors: lba48
>ata1: dev 1 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
>88:20ff
>ata1: dev 1 ATA, max UDMA7, 312581808 sectors: lba48
>ata1: dev 0 configured for UDMA/133
>ata1: dev 1 configured for UDMA/133
>scsi0 : ata_piix
>ata2: dev 0 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
>88:20ff
>ata2: dev 0 ATA, max UDMA7, 234493056 sectors: lba48
>ata2: dev 1 cfg 49:2f00 82:346b 83:7f01 84:4003 85:3c69 86:3e01 87:4003
>88:20ff
>ata2: dev 1 ATA, max UDMA7, 312581808 sectors: lba48
>ata2: dev 0 configured for UDMA/133
>ata2: dev 1 configured for UDMA/133
>scsi1 : ata_piix
> Vendor: ATA Model: SAMSUNG SP1213C Rev: SV10
> Type: Direct-Access ANSI SCSI revision: 05
> Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10
> Type: Direct-Access ANSI SCSI revision: 05
> Vendor: ATA Model: SAMSUNG SP1213C Rev: SV10
> Type: Direct-Access ANSI SCSI revision: 05
> Vendor: ATA Model: SAMSUNG SP1614C Rev: SW10
> Type: Direct-Access ANSI SCSI revision: 05
>SCSI device sda: 234493056 512-byte hdwr sectors (120060 MB)
>SCSI device sda: drive cache: write back
>SCSI device sda: 234493056 512-byte hdwr sectors (120060 MB)
>SCSI device sda: drive cache: write back
> sda: sda1 sda2 < sda5 sda6 sda7 >
>Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
>SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>SCSI device sdb: drive cache: write back
>SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>SCSI device sdb: drive cache: write back
> sdb: sdb1 sdb2 < sdb5 >
>Attached scsi disk sdb at scsi0, channel 0, id 1, lun 0
>SCSI device sdc: 234493056 512-byte hdwr sectors (120060 MB)
>SCSI device sdc: drive cache: write back
>SCSI device sdc: 234493056 512-byte hdwr sectors (120060 MB)
>SCSI device sdc: drive cache: write back
> sdc: sdc1 sdc2 < sdc5 sdc6 >
>Attached scsi disk sdc at scsi1, channel 0, id 0, lun 0
>SCSI device sdd: 312581808 512-byte hdwr sectors (160042 MB)
>SCSI device sdd: drive cache: write back
>SCSI device sdd: 312581808 512-byte hdwr sectors (160042 MB)
>SCSI device sdd: drive cache: write back
> sdd: sdd1 sdd2 < sdd5 >
>Attached scsi disk sdd at scsi1, channel 0, id 1, lun 0
>Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0
>Attached scsi generic sg1 at scsi0, channel 0, id 1, lun 0, type 0
>Attached scsi generic sg2 at scsi1, channel 0, id 0, lun 0, type 0
>Attached scsi generic sg3 at scsi1, channel 0, id 1, lun 0, type 0
>usbmon: debugs is not available
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 233
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
>Family) USB2 EHCI Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: irq 233, io mem 0xd2cff800
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>USB Universal Host Controller Interface driver v2.2
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 233
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
>Family) USB UHCI #1
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 233, io base 0x00009880
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
>Family) USB UHCI #2
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 225, io base 0x00009c00
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 217
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
>Family) USB UHCI #3
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 217, io base 0x0000a000
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
>Family) USB UHCI #4
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000a080
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>Initializing USB Mass Storage driver...
>usbcore: registered new driver usb-storage
>USB Mass Storage support registered.
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.01:USB HID core driver
>mice: PS/2 mouse device common for all mice
>md: linear personality registered as nr 1
>md: raid0 personality registered as nr 2
>md: raid1 personality registered as nr 3
>md: raid5 personality registered as nr 4
>raid5: automatically using best checksumming function: generic_sse
> generic_sse: 5108.000 MB/sec
>raid5: using function: generic_sse (5108.000 MB/sec)
>md: multipath personality registered as nr 7
>md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
>Advanced Linux Sound Architecture Driver Version 1.0.9rc2 (Thu Mar 24
>10:33:39 2005 UTC).
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ALSA device list:
> #0: HDA Intel at 0xd2cf4000 irq 169
>NET: Registered protocol family 2
>IP: routing cache hash table of 4096 buckets, 64Kbytes
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>ip_conntrack version 2.1 (4094 buckets, 32752 max) - 304 bytes per conntrack
>ip_tables: (C) 2000-2002 Netfilter core team
>ipt_recent v0.3.1: Stephen Frost <sfrost-vhD3WmCyG/PR7s880joybQ@public.gmane.org>.
>http://snowman.net/projects/ipt_recent/
>arp_tables: (C) 2002 David S. Miller
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI wakeup devices:
>P0P1 P0P3 P0P4 P0P5 P0P6 P0P7 USB1 USB2 USB3 USB4 EUSB MC97
>ACPI: (supports S0 S1 S3 S4 S5)
>md: Autodetecting RAID arrays.
>usb 3-1: new low speed USB device using uhci_hcd and address 2
>md: autorun ...
>md: considering sdd5 ...
>md: adding sdd5 ...
>md: sdd1 has different UUID to sdd5
>md: sdc6 has different UUID to sdd5
>md: sdc5 has different UUID to sdd5
>md: adding sdb5 ...
>md: sdb1 has different UUID to sdd5
>md: sda6 has different UUID to sdd5
>md: sda5 has different UUID to sdd5
>md: created md3
>md: bind<sdb5>
>md: bind<sdd5>
>md: running: <sdd5><sdb5>
>raid1: raid set md3 active with 2 out of 2 mirrors
>md: considering sdd1 ...
>md: adding sdd1 ...
>md: adding sdc6 ...
>md: sdc5 has different UUID to sdd1
>md: adding sdb1 ...
>md: adding sda6 ...
>md: sda5 has different UUID to sdd1
>md: created md1
>md: bind<sda6>
>md: bind<sdb1>
>md: bind<sdc6>
>md: bind<sdd1>
>md: running: <sdd1><sdc6><sdb1><sda6>
>md1: setting max_sectors to 128, segment boundary to 32767
>raid0: looking at sdd1
>raid0: comparing sdd1(7325504) with sdd1(7325504)
>raid0: END
>raid0: ==> UNIQUE
>raid0: 1 zones
>raid0: looking at sdc6
>raid0: comparing sdc6(7325504) with sdd1(7325504)
>raid0: EQUAL
>raid0: looking at sdb1
>raid0: comparing sdb1(7325504) with sdd1(7325504)
>raid0: EQUAL
>raid0: looking at sda6
>raid0: comparing sda6(7325504) with sdd1(7325504)
>raid0: EQUAL
>raid0: FINAL 1 zones
>raid0: done.
>raid0 : md_size is 29302016 blocks.
>raid0 : conf->hash_spacing is 29302016 blocks.
>raid0 : nb_zone is 1.
>raid0 : Allocating 8 bytes for hash.
>md: considering sdc5 ...
>md: adding sdc5 ...
>md: adding sda5 ...
>md: created md0
>md: bind<sda5>
>md: bind<sdc5>
>md: running: <sdc5><sda5>
>md0: setting max_sectors to 128, segment boundary to 32767
>raid0: looking at sdc5
>raid0: comparing sdc5(30001280) with sdc5(30001280)
>raid0: END
>raid0: ==> UNIQUE
>raid0: 1 zones
>raid0: looking at sda5
>raid0: comparing sda5(30001280) with sdc5(30001280)
>raid0: EQUAL
>raid0: FINAL 1 zones
>raid0: done.
>raid0 : md_size is 60002560 blocks.
>raid0 : conf->hash_spacing is 60002560 blocks.
>raid0 : nb_zone is 1.
>raid0 : Allocating 8 bytes for hash.
>md: ... autorun DONE.
>UDF-fs: No partition found (1)
>XFS mounting filesystem md1
>Ending clean XFS mount for filesystem: md1
>VFS: Mounted root (xfs filesystem) readonly.
>Freeing unused kernel memory: 208k freed
>input: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on
>usb-0000:00:1d.1-1
>input: USB HID v1.10 Device [Logitech HID compliant keyboard] on
>usb-0000:00:1d.1-1
>usb 3-2: new low speed USB device using uhci_hcd and address 3
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
>usb-0000:00:1d.1-2
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>
>
>
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Re: Fw: Re: 2.6.12-rc2-mm2
[not found] ` <425707A2.2050208-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
@ 2005-04-08 23:50 ` Bjorn Helgaas
2005-04-09 3:20 ` Len Brown
1 sibling, 0 replies; 5+ messages in thread
From: Bjorn Helgaas @ 2005-04-08 23:50 UTC (permalink / raw)
To: Michael Thonke
Cc: Andrew Morton, Len Brown, ACPI List,
tom.l.nguyen-ral2JQCrhuEAvxtiuMwx3w
On Sat, 2005-04-09 at 00:37 +0200, Michael Thonke wrote:
> but whats so different that causes some PCI-E cards to get not regonized
> or working at all?
I'm not clear on which cards are not recognized. In the -mm dmesg
log you posted, sk98lin found a card:
Linux version 2.6.12-rc2-mm2-md1 (root@ioGL64NX) (gcc-Version 3.4.3 20041125 (Gentoo Linux 3.4.3-r1, ssp-3.4.3-0, pie-8.7.7)) #2 SMP PREEMPT
...
sk98lin: Network Device Driver v8.15.1.3
(C)Copyright 1999-2005 Marvell(R).
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:02:00.0 to 64
eth0: Marvell Yukon 88E8053 Gigabit Ethernet Controller
PrefPort:A RlmtMode:Check Link State
So what do you mean by "not recognized"? I assumed you meant that
the card just didn't work.
I noticed in some lspci output the IRQ was reported as 7, not
the 201 above. So that also makes me suspicious of PCI-Express
IRQ routing gone bad.
Please don't trim the to/cc list; I added Tom because he knows
about PCI Express.
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Fw: Re: 2.6.12-rc2-mm2
[not found] ` <425707A2.2050208-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2005-04-08 23:50 ` Bjorn Helgaas
@ 2005-04-09 3:20 ` Len Brown
1 sibling, 0 replies; 5+ messages in thread
From: Len Brown @ 2005-04-09 3:20 UTC (permalink / raw)
To: Michael Thonke; +Cc: Andrew Morton, ACPI Developers, Bjorn Helgaas
On Fri, 2005-04-08 at 18:37, Michael Thonke wrote:
> Hi Andrew and Bjorn,
>
> but whats so different that causes some PCI-E cards to get not
> regonized
> or working at all?
> I mean 2.6.11.x works and 2.6.12-rc2 works,while 2.6.12-rc1 was like
> mm-behavior with
>
> ACPI: Can't get handler for
>
Not possible, the code that prints that (nop) string
is not present in Linus' tree -- it exists only in the mm patch.
Indeed, the glue.c code that prints this message has been in
mm tree, and you can remove just that patch by getting it here:
http://linux-acpi.bkbits.net:8080/to-akpm/cset@423bb5a2CcvybiQpT6qaZpTIzPtzCQ
If 2.6.12-rc1 was broken like the mm tree, then it could
have had noting to do with this.
-Len
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2005-04-09 3:20 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-04-08 16:29 Fw: Re: 2.6.12-rc2-mm2 Andrew Morton
[not found] ` <20050408092947.41175d63.akpm-3NddpPZAyC0@public.gmane.org>
2005-04-08 21:16 ` Bjorn Helgaas
2005-04-08 22:37 ` Michael Thonke
[not found] ` <425707A2.2050208-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2005-04-08 23:50 ` Bjorn Helgaas
2005-04-09 3:20 ` Len Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox