* bk-acpi causes freezes on ia64/tiger
@ 2005-04-08 8:14 Andrew Morton
[not found] ` <20050408011437.7fe1159d.akpm-3NddpPZAyC0@public.gmane.org>
0 siblings, 1 reply; 7+ messages in thread
From: Andrew Morton @ 2005-04-08 8:14 UTC (permalink / raw)
To: Brown, Len; +Cc: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
[-- Attachment #1: Type: text/plain, Size: 6932 bytes --]
Current bk-acpi tree causes my Intel tiger box to freeze partway through
boot.
.config is attached, dmesg is below.
I'll keep bk-acpi in -mm for rc2-mm2. Who knows, someone might fix it.
GSI 23 (level, low) -> CPU 3 (0xc018) vector 51
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 51
ehci_hcd 0000:00:1d.7: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: irq 51, io mem 0xf9ff0000
PCI: slot 0000:00:1d.7 has incorrect PCI cache line size of 0 bytes, correcting to 128
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v2.2
GSI 16 (level, low) -> CPU 3 (0xc018) vector 52
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 52
uhci_hcd 0000:00:1d.0: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 52, io base 0x00004cc0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
GSI 19 (level, low) -> CPU 3 (0xc018) vector 53
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 53
uhci_hcd 0000:00:1d.1: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 53, io base 0x00004ce0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 3-2: new low speed USB device using uhci_hcd and address 2
usbcore: registered new driver hiddev
input: USB HID v1.10 Keyboard [SOLIDTEK USB Composite Keyboard] on usb-0000:00:1d.1-2
input,hiddev96: USB HID v1.10 Device [SOLIDTEK USB Composite Keyboard] on usb-0000:00:1d.1-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
usbcore: registered new driver emi26 - firmware loader
usbcore: registered new driver emi62 - firmware loader
usbcore: registered new driver usbled
usbcore: registered new driver legousbtower
drivers/usb/misc/legousbtower.c: LEGO USB Tower Driver v0.96
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
i2c-parport: using default base 0x378
i2c-sis96x version 1.0.0
i2c_adapter i2c-1: Unsupported chip (man_id=0x0000, chip_id=0x00).
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 2
IP: routing cache hash table of 16384 buckets, 256Kbytes
TCP established hash table entries: 131072 (order: 7, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 6, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 240kB freed
ACPI: PCI interrupt for device 0000:01:00.0 disabled
GSI 18 (level, low) -> vector 48 unregisterd.
Synchronizing SCSI cache for disk sdc:
Synchronizing SCSI cache for disk sdb:
Synchronizing SCSI cache for disk sda:
Restarting system.
ng info for pci:0000:02:1f.0
ACPI: Can't get handler for 0000:06:02.0
ACPI: Can't get handler for 0000:06:02.1
ACPI: PCI Root Bridge [PCI3] (0000:09)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
ACPI: Assume root bridge [\_SB_.PCI1] segment is 0
ACPI: Assume root bridge [\_SB_.PCI3] segment is 0
ACPI: Assume root bridge [\_SB_.PCI4] segment is 0
ACPI: Can't get handler for 0000:09:1c.0
ACPI: Can't get handler for 0000:09:1e.0
ACPI: PCI Root Bridge [PCI4] (0000:0f)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
ACPI: Assume root bridge [\_SB_.PCI1] segment is 0
ACPI: Assume root bridge [\_SB_.PCI3] segment is 0
ACPI: Assume root bridge [\_SB_.PCI4] segment is 0
ACPI: Can't get handler for 0000:0f:1c.0
ACPI: Can't get handler for 0000:0f:1e.0
ACPI: Device [CSFF] status [00000008]: functional but not present; setting present
ACPI: PCI Root Bridge [CSFF] (0000:ff)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
ACPI: Assume root bridge [\_SB_.PCI1] segment is 0
ACPI: Assume root bridge [\_SB_.PCI3] segment is 0
ACPI: Assume root bridge [\_SB_.PCI4] segment is 0
ACPI: Can't get handler for 0000:ff:18.0
ACPI: Can't get handler for 0000:ff:18.1
ACPI: Can't get handler for 0000:ff:18.2
ACPI: Can't get handler for 0000:ff:18.3
ACPI: Can't get handler for 0000:ff:1c.0
ACPI: Can't get handler for 0000:ff:1c.1
ACPI: Can't get handler for 0000:ff:1c.2
ACPI: Can't get handler for 0000:ff:1c.3
ACPI: Can't get handler for 0000:ff:1c.4
ACPI: Can't get handler for 0000:ff:1c.5
ACPI: Can't get handler for 0000:ff:1c.6
SCSI subsystem initialized
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
perfmon: version 2.0 IRQ 238
perfmon: Itanium 2 PMU detected, 16 PMCs, 18 PMDs, 4 counters (47 bits)
PAL Information Facility v0.5
perfmon: added sampling format default_format
perfmon_default_smpl: default_format v2.0 registered
audit: initializing netlink socket (disabled)
audit(1112974465.397:0): initialized
Total HugeTLB memory allocated, 0
Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org).
SGI XFS with ACLs, realtime, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
ACPI: Power Button (FF) [PWRF]
ACPI: CPU0 (power states: C1[C1])
ACPI: CPU1 (power states: C1[C1])
ACPI: CPU2 (power states: C1[C1])
ACPI: CPU3 (power states: C1[C1])
EFI Time Services Driver v0.4
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ACPI: No ACPI bus support for serial8250
acpi_serial_port: zero-length IO port range?
ttyS0 at I/O 0x3f8 (irq = 44) is a 16550A
acpi_serial_port: zero-length IO port range?
ttyS1 at I/O 0x2f8 (irq = 45) is a 16550A
io scheduler noop registered
[-- Attachment #2: config-ia64 --]
[-- Type: application/octet-stream, Size: 24867 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12-rc2
# Fri Apr 8 15:53:23 2005
#
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_OBSOLETE_MODPARM=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_MMU=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_INTERPOLATION=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
# CONFIG_IA64_GENERIC is not set
CONFIG_IA64_DIG=y
# CONFIG_IA64_HP_ZX1 is not set
# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
# CONFIG_IA64_SGI_SN2 is not set
# CONFIG_IA64_HP_SIM is not set
# CONFIG_ITANIUM is not set
CONFIG_MCKINLEY=y
# CONFIG_IA64_PAGE_SIZE_4KB is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
CONFIG_IA64_PAGE_SIZE_16KB=y
# CONFIG_IA64_PAGE_SIZE_64KB is not set
CONFIG_IA64_L1_CACHE_SHIFT=7
# CONFIG_NUMA is not set
CONFIG_VIRTUAL_MEM_MAP=y
CONFIG_HOLES_IN_ZONE=y
CONFIG_IA64_CYCLONE=y
CONFIG_IOSAPIC=y
CONFIG_FORCE_MAX_ZONEORDER=18
CONFIG_SMP=y
CONFIG_NR_CPUS=8
# CONFIG_HOTPLUG_CPU is not set
# CONFIG_PREEMPT is not set
CONFIG_HAVE_DEC_LOCK=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
CONFIG_ACPI_DEALLOCATE_IRQ=y
#
# Firmware Drivers
#
CONFIG_EFI_VARS=y
# CONFIG_EFI_PCDP is not set
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
#
# Power management and ACPI
#
CONFIG_PM=y
CONFIG_ACPI=y
#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_ACPI_CONTAINER is not set
#
# Bus options (PCI, PCMCIA)
#
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
# CONFIG_PCI_DEBUG is not set
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
CONFIG_DEBUG_DRIVER=y
#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_SX8=m
CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_ATA_OVER_ETH=m
#
# ATA/ATAPI/MFM/RLL support
#
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=y
CONFIG_CHR_DEV_OSST=y
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
#
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
CONFIG_SCSI_3W_9XXX=m
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
CONFIG_SCSI_AIC7XXX_OLD=y
# CONFIG_SCSI_AIC79XX is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_AHCI is not set
CONFIG_SCSI_SATA_SVW=y
CONFIG_SCSI_ATA_PIIX=y
CONFIG_SCSI_SATA_NV=m
CONFIG_SCSI_SATA_PROMISE=y
# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_SX4 is not set
# CONFIG_SCSI_SATA_SIL is not set
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
CONFIG_SCSI_SATA_VIA=y
CONFIG_SCSI_SATA_VITESSE=y
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
CONFIG_FUSION=y
CONFIG_FUSION_MAX_SGE=40
# CONFIG_FUSION_CTL is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set
#
# I2O device support
#
# CONFIG_I2O is not set
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=m
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
#
# IP: Netfilter Configuration
#
# CONFIG_IP_NF_CONNTRACK is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set
CONFIG_IP_NF_ARPTABLES=y
# CONFIG_IP_NF_ARPFILTER is not set
# CONFIG_IP_NF_ARP_MANGLE is not set
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
CONFIG_BONDING=y
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
CONFIG_FORCEDETH=y
# CONFIG_DGRS is not set
CONFIG_EEPRO100=y
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Telephony Support
#
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=y
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_ACPI=y
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_EFI_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=m
CONFIG_AGP_I460=m
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=y
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=y
# CONFIG_I2C_ALI1563 is not set
CONFIG_I2C_ALI15X3=y
CONFIG_I2C_AMD756=y
# CONFIG_I2C_AMD756_S4882 is not set
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
CONFIG_I2C_I810=y
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_ISA=y
CONFIG_I2C_NFORCE2=y
CONFIG_I2C_PARPORT_LIGHT=y
CONFIG_I2C_PROSAVAGE=y
CONFIG_I2C_SAVAGE4=y
CONFIG_SCx200_ACB=y
CONFIG_I2C_SIS5595=y
CONFIG_I2C_SIS630=y
CONFIG_I2C_SIS96X=y
CONFIG_I2C_STUB=m
CONFIG_I2C_VIA=y
CONFIG_I2C_VIAPRO=y
CONFIG_I2C_VOODOO3=y
CONFIG_I2C_PCA_ISA=m
#
# Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=y
CONFIG_SENSORS_ADM1021=y
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
CONFIG_SENSORS_ASB100=y
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_IT87=y
# CONFIG_SENSORS_LM63 is not set
CONFIG_SENSORS_LM75=y
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=y
# CONFIG_SENSORS_LM80 is not set
CONFIG_SENSORS_LM83=y
CONFIG_SENSORS_LM85=y
# CONFIG_SENSORS_LM87 is not set
CONFIG_SENSORS_LM90=y
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_VIA686A=y
CONFIG_SENSORS_W83781D=y
CONFIG_SENSORS_W83L785TS=y
# CONFIG_SENSORS_W83627HF is not set
#
# Other I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
CONFIG_SENSORS_EEPROM=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
CONFIG_I2C_DEBUG_CORE=y
# CONFIG_I2C_DEBUG_ALGO is not set
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y
#
# Dallas's 1-wire bus
#
CONFIG_W1=m
CONFIG_W1_MATROX=m
CONFIG_W1_DS9490=m
# CONFIG_W1_DS9490_BRIDGE is not set
CONFIG_W1_THERM=m
CONFIG_W1_SMEM=m
#
# Misc devices
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
CONFIG_FB_CIRRUS=m
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_NVIDIA is not set
CONFIG_FB_RIVA=m
# CONFIG_FB_RIVA_I2C is not set
# CONFIG_FB_RIVA_DEBUG is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
CONFIG_FB_RADEON=y
CONFIG_FB_RADEON_I2C=y
# CONFIG_FB_RADEON_DEBUG is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
CONFIG_FB_KYRO=y
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
# CONFIG_SND_MIXER_OSS is not set
# CONFIG_SND_PCM_OSS is not set
# CONFIG_SND_SEQUENCER_OSS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
#
# PCI devices
#
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
CONFIG_SND_ATIIXP_MODEM=m
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
CONFIG_SND_EMU10K1X=m
CONFIG_SND_CA0106=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
CONFIG_SND_FM801=m
# CONFIG_SND_FM801_TEA575X is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_VIA82XX is not set
CONFIG_SND_VIA82XX_MODEM=m
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set
#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
CONFIG_USB_BANDWIDTH=y
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=y
CONFIG_USB_EMI26=y
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=y
# CONFIG_USB_LCD is not set
CONFIG_USB_LED=y
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_SISUSBVGA is not set
#
# USB ATM/DSL drivers
#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set
#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
#
# XFS support
#
CONFIG_XFS_FS=y
CONFIG_XFS_EXPORT=y
CONFIG_XFS_RT=y
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_SECURITY is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_HFSPLUS_FS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
CONFIG_EFI_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=y
CONFIG_NLS_CODEPAGE_775=y
CONFIG_NLS_CODEPAGE_850=y
CONFIG_NLS_CODEPAGE_852=y
CONFIG_NLS_CODEPAGE_855=y
CONFIG_NLS_CODEPAGE_857=y
CONFIG_NLS_CODEPAGE_860=y
CONFIG_NLS_CODEPAGE_861=y
CONFIG_NLS_CODEPAGE_862=y
CONFIG_NLS_CODEPAGE_863=y
CONFIG_NLS_CODEPAGE_864=y
CONFIG_NLS_CODEPAGE_865=y
CONFIG_NLS_CODEPAGE_866=y
CONFIG_NLS_CODEPAGE_869=y
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
CONFIG_NLS_CODEPAGE_949=y
CONFIG_NLS_CODEPAGE_874=y
CONFIG_NLS_ISO8859_8=y
# CONFIG_NLS_CODEPAGE_1250 is not set
CONFIG_NLS_CODEPAGE_1251=y
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=y
CONFIG_NLS_ISO8859_3=y
CONFIG_NLS_ISO8859_4=y
CONFIG_NLS_ISO8859_5=y
CONFIG_NLS_ISO8859_6=y
CONFIG_NLS_ISO8859_7=y
CONFIG_NLS_ISO8859_9=y
CONFIG_NLS_ISO8859_13=y
CONFIG_NLS_ISO8859_14=y
CONFIG_NLS_ISO8859_15=y
CONFIG_NLS_KOI8_R=y
CONFIG_NLS_KOI8_U=y
CONFIG_NLS_UTF8=y
#
# Library routines
#
CONFIG_CRC_CCITT=y
CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=16
# CONFIG_SCHEDSTATS is not set
CONFIG_DEBUG_SLAB=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
# CONFIG_IA64_GRANULE_16MB is not set
CONFIG_IA64_GRANULE_64MB=y
CONFIG_IA64_PRINT_HAZARDS=y
# CONFIG_DISABLE_VHPT is not set
# CONFIG_IA64_DEBUG_CMPXCHG is not set
# CONFIG_IA64_DEBUG_IRQ is not set
CONFIG_SYSVIPC_COMPAT=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
CONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_TEA=m
# CONFIG_CRYPTO_ARC4 is not set
CONFIG_CRYPTO_KHAZAD=m
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: bk-acpi causes freezes on ia64/tiger
[not found] ` <20050408011437.7fe1159d.akpm-3NddpPZAyC0@public.gmane.org>
@ 2005-04-11 3:38 ` Len Brown
2005-04-11 20:45 ` Len Brown
0 siblings, 1 reply; 7+ messages in thread
From: Len Brown @ 2005-04-11 3:38 UTC (permalink / raw)
To: Andrew Morton; +Cc: ACPI Developers
On Fri, 2005-04-08 at 04:14, Andrew Morton wrote:
> Current bk-acpi tree causes my Intel tiger box to freeze partway
> through boot.
Hmmm, to-akpm tree hanged during boot on my tiger also (I used
tiger_defconfig), though it got further -- up through "Starting sound
driver"
-Len
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: bk-acpi causes freezes on ia64/tiger
2005-04-11 3:38 ` Len Brown
@ 2005-04-11 20:45 ` Len Brown
2005-04-12 1:29 ` Andrew Morton
0 siblings, 1 reply; 7+ messages in thread
From: Len Brown @ 2005-04-11 20:45 UTC (permalink / raw)
To: Andrew Morton; +Cc: ACPI Developers, Venkatesh Pallipadi
On Sun, 2005-04-10 at 23:38, Len Brown wrote:
> On Fri, 2005-04-08 at 04:14, Andrew Morton wrote:
> > Current bk-acpi tree causes my Intel tiger box to freeze partway
> > through boot.
Looks like the freeze may be due to the "C1 patch":
http://linux-acpi.bkbits.net:8080/to-akpm/cset@424cccb33M89YNHJOda1O6L0B6ucjw
If you revert that one does your tiger live?
thanks,
-Len
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: bk-acpi causes freezes on ia64/tiger
2005-04-11 20:45 ` Len Brown
@ 2005-04-12 1:29 ` Andrew Morton
[not found] ` <20050411182951.52f76e93.akpm-3NddpPZAyC0@public.gmane.org>
0 siblings, 1 reply; 7+ messages in thread
From: Andrew Morton @ 2005-04-12 1:29 UTC (permalink / raw)
To: Len Brown
Cc: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f,
venkatesh.pallipadi-ral2JQCrhuEAvxtiuMwx3w
Len Brown <len.brown-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org> wrote:
>
> On Sun, 2005-04-10 at 23:38, Len Brown wrote:
> > On Fri, 2005-04-08 at 04:14, Andrew Morton wrote:
> > > Current bk-acpi tree causes my Intel tiger box to freeze partway
> > > through boot.
>
> Looks like the freeze may be due to the "C1 patch":
>
> http://linux-acpi.bkbits.net:8080/to-akpm/cset@424cccb33M89YNHJOda1O6L0B6ucjw
>
> If you revert that one does your tiger live?
That server appears to be dead. I took a punt and reverted the below
patch. That fixed things up.
There's a bit of noice in the bootup though:
usbcore: registered new driver usbled
usbcore: registered new driver legousbtower
drivers/usb/misc/legousbtower.c: LEGO USB Tower Driver v0.96
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
i2c-parport: using default base 0x378
i2c-sis96x version 1.0.0
ACPI: No ACPI bus support for 1-0018
ACPI: No ACPI bus support for 1-0019
ACPI: No ACPI bus support for 1-001a
ACPI: No ACPI bus support for 1-0029
ACPI: No ACPI bus support for 1-002a
ACPI: No ACPI bus support for 1-002b
ACPI: No ACPI bus support for 1-004c
ACPI: No ACPI bus support for 1-004d
ACPI: No ACPI bus support for 1-004e
ACPI: No ACPI bus support for 1-0050
ACPI: No ACPI bus support for 1-0051
ACPI: No ACPI bus support for 1-0052
ACPI: No ACPI bus support for 1-0053
ACPI: No ACPI bus support for 1-0054
ACPI: No ACPI bus support for 1-0055
ACPI: No ACPI bus support for 1-0056
ACPI: No ACPI bus support for 1-0057
ACPI: No ACPI bus support for 1-0048
ACPI: No ACPI bus support for 1-0049
ACPI: No ACPI bus support for 1-004a
ACPI: No ACPI bus support for 1-004b
ACPI: No ACPI bus support for 1-004f
i2c_adapter i2c-1: Unsupported chip (man_id=0x0000, chip_id=0x00).
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 2
# This is a BitKeeper generated diff -Nru style patch.
#
# ChangeSet
# 2005/03/31 23:23:15-05:00 len.brown-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org
# [ACPI] update /proc/acpi/processor/*/power even if only C1 support
#
# Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
# Signed-off-by: Len Brown <len.brown-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
#
# drivers/acpi/processor_idle.c
# 2005/03/25 21:41:52-05:00 len.brown-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org +26 -7
# C1 stats
#
diff -Nru a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
--- a/drivers/acpi/processor_idle.c 2005-04-11 18:19:06 -07:00
+++ b/drivers/acpi/processor_idle.c 2005-04-11 18:19:06 -07:00
@@ -519,6 +519,29 @@
}
+static int acpi_processor_get_power_info_default_c1 (struct acpi_processor *pr)
+{
+ int i;
+
+ ACPI_FUNCTION_TRACE("acpi_processor_get_power_info_default_c1");
+
+ for (i = 0; i < ACPI_PROCESSOR_MAX_POWER; i++)
+ memset(pr->power.states, 0, sizeof(struct acpi_processor_cx));
+
+ /* if info is obtained from pblk/fadt, type equals state */
+ pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1;
+ pr->power.states[ACPI_STATE_C2].type = ACPI_STATE_C2;
+ pr->power.states[ACPI_STATE_C3].type = ACPI_STATE_C3;
+
+ /* the C0 state only exists as a filler in our array,
+ * and all processors need to support C1 */
+ pr->power.states[ACPI_STATE_C0].valid = 1;
+ pr->power.states[ACPI_STATE_C1].valid = 1;
+
+ return_VALUE(0);
+}
+
+
static int acpi_processor_get_power_info_cst (struct acpi_processor *pr)
{
acpi_status status = 0;
@@ -787,10 +810,7 @@
if ((result) || (acpi_processor_power_verify(pr) < 2)) {
result = acpi_processor_get_power_info_fadt(pr);
if (result)
- return_VALUE(result);
-
- if (acpi_processor_power_verify(pr) < 2)
- return_VALUE(-ENODEV);
+ result = acpi_processor_get_power_info_default_c1(pr);
}
/*
@@ -810,11 +830,10 @@
* CPU as being "idle manageable"
*/
for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
- if (pr->power.states[i].valid)
+ if (pr->power.states[i].valid) {
pr->power.count = i;
- if ((pr->power.states[i].valid) &&
- (pr->power.states[i].type >= ACPI_STATE_C2))
pr->flags.power = 1;
+ }
}
return_VALUE(0);
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: bk-acpi causes freezes on ia64/tiger
[not found] ` <20050411182951.52f76e93.akpm-3NddpPZAyC0@public.gmane.org>
@ 2005-04-12 2:13 ` Andrew Morton
2005-04-12 3:25 ` Nigel Cunningham
2005-04-19 5:41 ` Len Brown
2 siblings, 0 replies; 7+ messages in thread
From: Andrew Morton @ 2005-04-12 2:13 UTC (permalink / raw)
To: len.brown-ral2JQCrhuEAvxtiuMwx3w,
acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f,
venkatesh.pallipadi-ral2JQCrhuEAvxtiuMwx3w
Andrew Morton <akpm-3NddpPZAyC0@public.gmane.org> wrote:
>
> That server appears to be dead. I took a punt and reverted the below
> patch. That fixed things up.
btw, I have a trace from the soft-lockup detector which appears to tell us
what's going on when this bug bites:
io scheduler noop registered
BUG: soft lockup detected on CPU#0!
Modules linked in:
Pid: 1, CPU 0, comm: swapper
psr : 00001010085a6010 ifs : 8000000000000691 ip : [<a00000010004efb0>] Not tainted
ip is at smp_call_function+0x270/0x3a0
unat: 0000000000000000 pfs : 0000000000000691 rsc : 0000000000000003
rnat: 0000000000000000 bsps: 0000000000000000 pr : 5694155165566a95
ldrs: 0000000000000000 ccv : 0000000000000000 fpsr: 0009804c8a70433f
csd : 0930ffff00090000 ssd : 0930ffff00090000
b0 : a00000010004ef70 b6 : 0000000000000000 b7 : a0000001000f78c0
f6 : 0fff5f4898d5f7d3e2694 f7 : 0ffe8823e07cec0000000
f8 : 1000cea80000000000000 f9 : 100088600000000000000
f10 : 10003dffffffff8396e57 f11 : 1003e000000000000001c
r1 : a000000100e42ff0 r2 : c0000000feec4180 r3 : 00000000000000fe
r8 : c0000000fee00000 r9 : 00000000000c4180 r10 : 0000000000000000
r11 : 000000000000c418 r12 : e00000003c7a7db0 r13 : e00000003c7a0000
r14 : 00000000000000fe r15 : 000000000000c418 r16 : 0000000000000000
r17 : a000000100c66b4c r18 : 00000000000000fe r19 : 0000000000000003
r20 : a000000100c66b40 r21 : a000000100c5dbb0 r22 : a000000100c66b40
r23 : 0000000000000000 r24 : 0000000000000000 r25 : 000000000000000f
r26 : 0000000000000007 r27 : 000000000000000f r28 : a000000100c5fa30
r29 : 0000000000000000 r30 : 0000000000000000 r31 : e00000003c7a0d54
Call Trace:
[<a00000010000ff60>] show_stack+0x80/0xa0
sp=e00000003c7a79f0 bsp=e00000003c7a1270
[<a0000001000107c0>] show_regs+0x7e0/0x800
sp=e00000003c7a7bc0 bsp=e00000003c7a1210
[<a0000001000dcd10>] softlockup_tick+0x130/0x160
sp=e00000003c7a7bd0 bsp=e00000003c7a11d8
[<a0000001000a5ae0>] do_timer+0xc0/0x1e0
sp=e00000003c7a7be0 bsp=e00000003c7a11b0
[<a000000100033a20>] timer_interrupt+0x2e0/0x340
sp=e00000003c7a7be0 bsp=e00000003c7a1160
[<a0000001000dd1f0>] handle_IRQ_event+0x90/0x140
sp=e00000003c7a7be0 bsp=e00000003c7a1120
[<a0000001000dd3b0>] __do_IRQ+0x110/0x380
sp=e00000003c7a7be0 bsp=e00000003c7a10c8
[<a00000010000ef40>] ia64_handle_irq+0xa0/0x140
sp=e00000003c7a7be0 bsp=e00000003c7a1090
[<a00000010000b2a0>] ia64_leave_kernel+0x0/0x280
sp=e00000003c7a7be0 bsp=e00000003c7a1090
[<a00000010004efb0>] smp_call_function+0x270/0x3a0
sp=e00000003c7a7db0 bsp=e00000003c7a1008
[<a0000001000f3b10>] smp_call_function_all_cpus+0x90/0xe0
sp=e00000003c7a7dd0 bsp=e00000003c7a0fd8
[<a0000001000f7a90>] do_tune_cpucache+0x130/0x3e0
sp=e00000003c7a7dd0 bsp=e00000003c7a0f70
[<a0000001000f7e10>] enable_cpucache+0xd0/0x120
sp=e00000003c7a7e20 bsp=e00000003c7a0f50
[<a0000001000f3730>] kmem_cache_create+0xdf0/0xfa0
sp=e00000003c7a7e20 bsp=e00000003c7a0eb8
[<a0000001009feee0>] as_init+0x40/0xe0
sp=e00000003c7a7e30 bsp=e00000003c7a0e90
[<a0000001009d50f0>] do_initcalls+0xb0/0x200
sp=e00000003c7a7e30 bsp=e00000003c7a0e28
[<a0000001009d52b0>] do_basic_setup+0x70/0xa0
sp=e00000003c7a7e30 bsp=e00000003c7a0e10
[<a0000001000093b0>] init+0xd0/0x380
sp=e00000003c7a7e30 bsp=e00000003c7a0dd8
[<a000000100012150>] kernel_thread_helper+0xd0/0x100
sp=e00000003c7a7e30 bsp=e00000003c7a0db0
[<a000000100009120>] start_kernel_thread+0x20/0x40
sp=e00000003c7a7e30 bsp=e00000003c7a0db0
ce 0000:06:02.0
ACPI: Can't get handler for 0000:06:02.0
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Re: bk-acpi causes freezes on ia64/tiger
[not found] ` <20050411182951.52f76e93.akpm-3NddpPZAyC0@public.gmane.org>
2005-04-12 2:13 ` Andrew Morton
@ 2005-04-12 3:25 ` Nigel Cunningham
2005-04-19 5:41 ` Len Brown
2 siblings, 0 replies; 7+ messages in thread
From: Nigel Cunningham @ 2005-04-12 3:25 UTC (permalink / raw)
To: Andrew Morton
Cc: Len Brown, ACPI List, venkatesh.pallipadi-ral2JQCrhuEAvxtiuMwx3w
On Tue, 2005-04-12 at 11:29, Andrew Morton wrote:
> Len Brown <len.brown-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org> wrote:
> >
> > On Sun, 2005-04-10 at 23:38, Len Brown wrote:
> > > On Fri, 2005-04-08 at 04:14, Andrew Morton wrote:
> > > > Current bk-acpi tree causes my Intel tiger box to freeze partway
> > > > through boot.
> >
> > Looks like the freeze may be due to the "C1 patch":
> >
> > http://linux-acpi.bkbits.net:8080/to-akpm/cset@424cccb33M89YNHJOda1O6L0B6ucjw
> >
> > If you revert that one does your tiger live?
>
> That server appears to be dead. I took a punt and reverted the below
> patch. That fixed things up.
Larry posted a message on LKML a short while ago saying bk-bits is down,
and offering to go and reboot it if anyone so desired.
Regards,
Nigel
--
Nigel Cunningham
Software Engineer, Canberra, Australia
http://www.cyclades.com
Bus: +61 (2) 6291 9554; Hme: +61 (2) 6292 8028; Mob: +61 (417) 100 574
Maintainer of Suspend2 Kernel Patches http://suspend2.net
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: bk-acpi causes freezes on ia64/tiger
[not found] ` <20050411182951.52f76e93.akpm-3NddpPZAyC0@public.gmane.org>
2005-04-12 2:13 ` Andrew Morton
2005-04-12 3:25 ` Nigel Cunningham
@ 2005-04-19 5:41 ` Len Brown
2 siblings, 0 replies; 7+ messages in thread
From: Len Brown @ 2005-04-19 5:41 UTC (permalink / raw)
To: Andrew Morton; +Cc: ACPI Developers, Venkatesh Pallipadi
Andrew,
as of the latest acpi to-akpm tree,
you should no longer need to revert the patch below
for the benefit of ia64.
thanks,
-Len
On Mon, 2005-04-11 at 21:29, Andrew Morton wrote:
> Len Brown <len.brown-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org> wrote:
> >
> > On Sun, 2005-04-10 at 23:38, Len Brown wrote:
> > > On Fri, 2005-04-08 at 04:14, Andrew Morton wrote:
> > > > Current bk-acpi tree causes my Intel tiger box to freeze
> partway
> > > > through boot.
> >
> > Looks like the freeze may be due to the "C1 patch":
> >
> >
> http://linux-acpi.bkbits.net:8080/to-akpm/cset@424cccb33M89YNHJOda1O6L0B6ucjw
> >
> > If you revert that one does your tiger live?
>
> That server appears to be dead. I took a punt and reverted the below
> patch. That fixed things up.
>
> There's a bit of noice in the bootup though:
>
> usbcore: registered new driver usbled
> usbcore: registered new driver legousbtower
> drivers/usb/misc/legousbtower.c: LEGO USB Tower Driver v0.96
> mice: PS/2 mouse device common for all mice
> i2c /dev entries driver
> i2c-parport: using default base 0x378
> i2c-sis96x version 1.0.0
> ACPI: No ACPI bus support for 1-0018
> ACPI: No ACPI bus support for 1-0019
> ACPI: No ACPI bus support for 1-001a
> ACPI: No ACPI bus support for 1-0029
> ACPI: No ACPI bus support for 1-002a
> ACPI: No ACPI bus support for 1-002b
> ACPI: No ACPI bus support for 1-004c
> ACPI: No ACPI bus support for 1-004d
> ACPI: No ACPI bus support for 1-004e
> ACPI: No ACPI bus support for 1-0050
> ACPI: No ACPI bus support for 1-0051
> ACPI: No ACPI bus support for 1-0052
> ACPI: No ACPI bus support for 1-0053
> ACPI: No ACPI bus support for 1-0054
> ACPI: No ACPI bus support for 1-0055
> ACPI: No ACPI bus support for 1-0056
> ACPI: No ACPI bus support for 1-0057
> ACPI: No ACPI bus support for 1-0048
> ACPI: No ACPI bus support for 1-0049
> ACPI: No ACPI bus support for 1-004a
> ACPI: No ACPI bus support for 1-004b
> ACPI: No ACPI bus support for 1-004f
> i2c_adapter i2c-1: Unsupported chip (man_id=0x0000, chip_id=0x00).
> EFI Variables Facility v0.08 2004-May-17
> NET: Registered protocol family 2
>
>
>
>
>
> # This is a BitKeeper generated diff -Nru style patch.
> #
> # ChangeSet
> # 2005/03/31 23:23:15-05:00 len.brown-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org
> # [ACPI] update /proc/acpi/processor/*/power even if only C1 support
> #
> # Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> # Signed-off-by: Len Brown <len.brown-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
> #
> # drivers/acpi/processor_idle.c
> # 2005/03/25 21:41:52-05:00 len.brown-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org +26 -7
> # C1 stats
> #
> diff -Nru a/drivers/acpi/processor_idle.c
> b/drivers/acpi/processor_idle.c
> --- a/drivers/acpi/processor_idle.c 2005-04-11 18:19:06 -07:00
> +++ b/drivers/acpi/processor_idle.c 2005-04-11 18:19:06 -07:00
> @@ -519,6 +519,29 @@
> }
>
>
> +static int acpi_processor_get_power_info_default_c1 (struct
> acpi_processor *pr)
> +{
> + int i;
> +
> +
> ACPI_FUNCTION_TRACE("acpi_processor_get_power_info_default_c1");
> +
> + for (i = 0; i < ACPI_PROCESSOR_MAX_POWER; i++)
> + memset(pr->power.states, 0, sizeof(struct
> acpi_processor_cx));
> +
> + /* if info is obtained from pblk/fadt, type equals state */
> + pr->power.states[ACPI_STATE_C1].type = ACPI_STATE_C1;
> + pr->power.states[ACPI_STATE_C2].type = ACPI_STATE_C2;
> + pr->power.states[ACPI_STATE_C3].type = ACPI_STATE_C3;
> +
> + /* the C0 state only exists as a filler in our array,
> + * and all processors need to support C1 */
> + pr->power.states[ACPI_STATE_C0].valid = 1;
> + pr->power.states[ACPI_STATE_C1].valid = 1;
> +
> + return_VALUE(0);
> +}
> +
> +
> static int acpi_processor_get_power_info_cst (struct acpi_processor
> *pr)
> {
> acpi_status status = 0;
> @@ -787,10 +810,7 @@
> if ((result) || (acpi_processor_power_verify(pr) < 2)) {
> result = acpi_processor_get_power_info_fadt(pr);
> if (result)
> - return_VALUE(result);
> -
> - if (acpi_processor_power_verify(pr) < 2)
> - return_VALUE(-ENODEV);
> + result =
> acpi_processor_get_power_info_default_c1(pr);
> }
>
> /*
> @@ -810,11 +830,10 @@
> * CPU as being "idle manageable"
> */
> for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
> - if (pr->power.states[i].valid)
> + if (pr->power.states[i].valid) {
> pr->power.count = i;
> - if ((pr->power.states[i].valid) &&
> - (pr->power.states[i].type >= ACPI_STATE_C2))
> pr->flags.power = 1;
> + }
> }
>
> return_VALUE(0);
>
>
>
>
-------------------------------------------------------
This SF.Net email is sponsored by: New Crystal Reports XI.
Version 11 adds new functionality designed to reduce time involved in
creating, integrating, and deploying reporting solutions. Free runtime info,
new features, or free trial, at: http://www.businessobjects.com/devxi/728
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2005-04-19 5:41 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-04-08 8:14 bk-acpi causes freezes on ia64/tiger Andrew Morton
[not found] ` <20050408011437.7fe1159d.akpm-3NddpPZAyC0@public.gmane.org>
2005-04-11 3:38 ` Len Brown
2005-04-11 20:45 ` Len Brown
2005-04-12 1:29 ` Andrew Morton
[not found] ` <20050411182951.52f76e93.akpm-3NddpPZAyC0@public.gmane.org>
2005-04-12 2:13 ` Andrew Morton
2005-04-12 3:25 ` Nigel Cunningham
2005-04-19 5:41 ` Len Brown
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox