Fw: [Bugme-new] [Bug 4496] New: Interrupt-problem depends on sound-playing: irq 10: nobody cared!

Fw: [Bugme-new] [Bug 4496] New: Interrupt-problem depends on sound-playing: irq 10: nobody cared!

[Andrew Morton]

This IRQ routing bug appears to be an ACPI thing.  Could someone
please reassign it?



Begin forwarded message:

Date: Thu, 14 Apr 2005 14:27:34 -0700
From: bugme-daemon-3NddpPZAyC0@public.gmane.org
To: bugme-new-qjLDD68F18O7TbgM5vRIOg@public.gmane.org
Subject: [Bugme-new] [Bug 4496] New: Interrupt-problem depends on sound-playing: irq 10: nobody cared!


http://bugme.osdl.org/show_bug.cgi?id=4496

           Summary: Interrupt-problem depends on sound-playing: irq 10:
                    nobody cared!
    Kernel Version: 6.2.11/6.2.11.6/6.2.11.7
            Status: NEW
          Severity: high
             Owner: perex-/Fr2/VpizcU@public.gmane.org
         Submitter: hannes-diethelm-goEDY2E6dbVyDzI6CaY1VQ@public.gmane.org


Hello!

Distribution:
Debian Sarge

Hardware Environment:
http://www.ieiworld.com/en/product_IPC.asp?model=ROCKY-3732
Whith dual P3 860Mhz /512Mb RAM

Problem Description:
Whith the kernel-image-2.6.8 from debian i had no problem. But now i tryed to
install bootsplash-3.1.4-2.6.11 whit kernel 6.2.11 first and then whit kernel
6.2.11.6 and 6.2.11.7. I think its not e bug of Bootsplash, it's one of the
kernel, but if you think it's one of bootsplash, i would install a normal kernel
and try it again.

Whith kernel 2.6.11, the PC stopps imediatly to work when i started sound (echo
h > /dev/dsp is eneught). Whit kernel 2.6.11.6 the PC Plays sound, but when the
soundcard is not working abaut 2h 45min, in the syslog these strings apears:

Apr  8 04:47:48 localhost kernel: irq 10: nobody cared!
Apr  8 04:47:48 localhost kernel:  [<c013783a>] __report_bad_irq+0x2a/0xa0
Apr  8 04:47:48 localhost kernel:  [<c01371a0>] handle_IRQ_event+0x30/0x70
Apr  8 04:47:48 localhost kernel:  [<c0137940>] note_interrupt+0x70/0xb0
Apr  8 04:47:48 localhost kernel:  [<c0137313>] __do_IRQ+0x133/0x140
Apr  8 04:47:48 localhost kernel:  [<c0104cf9>] do_IRQ+0x19/0x30
Apr  8 04:47:48 localhost kernel:  [<c010322e>] common_interrupt+0x1a/0x20
Apr  8 04:47:48 localhost kernel:  [<c01006d3>] default_idle+0x23/0x30
Apr  8 04:47:48 localhost kernel:  [<c010077f>] cpu_idle+0x5f/0x70
Apr  8 04:47:48 localhost kernel:  [<c04ee99d>] start_kernel+0x17d/0x1c0
Apr  8 04:47:48 localhost kernel:  [<c04ee390>] unknown_bootoption+0x0/0x1e0
Apr  8 04:47:48 localhost kernel: handlers:
Apr  8 04:47:48 localhost kernel: [<c0347170>] (snd_via82xx_interrupt+0x0/0xd0)
Apr  8 04:47:48 localhost kernel: Disabling IRQ #10 

This is no problem, but later when i try to start sound, these string's apears
and USB and network is dead (No mouse, the keyboard works but when i tryed to
switch to the console, the PC frezez totally):

Apr  8 06:08:09 localhost kernel: irq 18: nobody cared!
Apr  8 06:08:09 localhost kernel:  [<c013783a>] __report_bad_irq+0x2a/0xa0
Apr  8 06:08:09 localhost kernel:  [<c01371a0>] handle_IRQ_event+0x30/0x70
Apr  8 06:08:09 localhost kernel:  [<c0137940>] note_interrupt+0x70/0xb0
Apr  8 06:08:09 localhost kernel:  [<c0137313>] __do_IRQ+0x133/0x140
Apr  8 06:08:09 localhost kernel:  [<c0104cf9>] do_IRQ+0x19/0x30
Apr  8 06:08:09 localhost kernel:  [<c010322e>] common_interrupt+0x1a/0x20
Apr  8 06:08:09 localhost kernel: handlers:
Apr  8 06:08:09 localhost kernel: [<c02e44d0>] (usb_hcd_irq+0x0/0x70)
Apr  8 06:08:09 localhost kernel: [<c02b6e70>] (speedo_interrupt+0x0/0x230)
Apr  8 06:08:09 localhost kernel: Disabling IRQ #18 
...
Apr  8 06:08:40 localhost kernel: NETDEV WATCHDOG: eth0: transmit timed out

I have also tryed to start with the pci=routeirq argument, but the problem was
the same...

Somthing from the syslog with kernel 2.6.11.6:
Apr  8 02:01:07 localhost kernel: PCI: Using ACPI for IRQ routing
Apr  8 02:01:07 localhost kernel: ** PCI interrupts are no longer routed
automatically.  If this
Apr  8 02:01:07 localhost kernel: ** causes a device to stop working, it is
probably because the
Apr  8 02:01:07 localhost kernel: ** driver failed to call pci_enable_device().
 As a temporary
Apr  8 02:01:07 localhost kernel: ** workaround, the "pci=routeirq" argument
restores the old
Apr  8 02:01:07 localhost kernel: ** behavior.  If this argument makes the
device work again,
Apr  8 02:01:07 localhost kernel: ** please email the output of "lspci" to
bjorn.helgaas-VXdhtT5mjnY@public.gmane.org
Apr  8 02:01:07 localhost kernel: ** so I can fix the driver.
...
Apr  8 02:01:07 localhost kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker
http://www.scyld.com/network/eepro100.html
Apr  8 02:01:07 localhost kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17
Modified by Andrey V. Savochkin <saw-5bpFXmC1L3aJ4eUNlOKu3Q@public.gmane.org> and others
Apr  8 02:01:07 localhost kernel: ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI 18
(level, low) -> IRQ 18
Apr  8 02:01:07 localhost kernel: eth0: 0000:00:0f.0, 00:08:9B:09:A9:4B, IRQ 18.
Apr  8 02:01:07 localhost kernel:   Board assembly 729757-006, Physical
connectors present: RJ45
Apr  8 02:01:07 localhost kernel:   Primary interface chip i82555 PHY #1.
Apr  8 02:01:07 localhost kernel:   General self-test: passed.
Apr  8 02:01:07 localhost kernel:   Serial sub-system self-test: passed.
Apr  8 02:01:07 localhost kernel:   Internal registers self-test: passed.
Apr  8 02:01:07 localhost kernel:   ROM checksum self-test: passed (0x04f4518b).
Apr  8 02:01:07 localhost kernel: ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 17
(level, low) -> IRQ 17
Apr  8 02:01:07 localhost kernel: eth1: 0000:00:10.0, 00:08:9B:09:A9:4C, IRQ 17.
Apr  8 02:01:07 localhost kernel:   Board assembly 729757-006, Physical
connectors present: RJ45
Apr  8 02:01:07 localhost kernel:   Primary interface chip i82555 PHY #1.
Apr  8 02:01:07 localhost kernel:   General self-test: passed.
Apr  8 02:01:07 localhost kernel:   Serial sub-system self-test: passed.
Apr  8 02:01:07 localhost kernel:   Internal registers self-test: passed.
Apr  8 02:01:07 localhost kernel:   ROM checksum self-test: passed (0x04f4518b).
...
Apr  8 02:01:07 localhost kernel: ALSA device list:
Apr  8 02:01:07 localhost kernel:   #0: VIA 82C686A/B rev50 with ALC200/200P at
0xb800, irq 10
...
Apr  8 04:47:48 localhost kernel: irq 10: nobody cared!
Apr  8 04:47:48 localhost kernel:  [<c013783a>] __report_bad_irq+0x2a/0xa0
Apr  8 04:47:48 localhost kernel:  [<c01371a0>] handle_IRQ_event+0x30/0x70
Apr  8 04:47:48 localhost kernel:  [<c0137940>] note_interrupt+0x70/0xb0
Apr  8 04:47:48 localhost kernel:  [<c0137313>] __do_IRQ+0x133/0x140
Apr  8 04:47:48 localhost kernel:  [<c0104cf9>] do_IRQ+0x19/0x30
Apr  8 04:47:48 localhost kernel:  [<c010322e>] common_interrupt+0x1a/0x20
Apr  8 04:47:48 localhost kernel:  [<c01006d3>] default_idle+0x23/0x30
Apr  8 04:47:48 localhost kernel:  [<c010077f>] cpu_idle+0x5f/0x70
Apr  8 04:47:48 localhost kernel:  [<c04ee99d>] start_kernel+0x17d/0x1c0
Apr  8 04:47:48 localhost kernel:  [<c04ee390>] unknown_bootoption+0x0/0x1e0
Apr  8 04:47:48 localhost kernel: handlers:
Apr  8 04:47:48 localhost kernel: [<c0347170>] (snd_via82xx_interrupt+0x0/0xd0)
Apr  8 04:47:48 localhost kernel: Disabling IRQ #10
...
Apr  8 06:08:09 localhost kernel: irq 18: nobody cared!
Apr  8 06:08:09 localhost kernel:  [<c013783a>] __report_bad_irq+0x2a/0xa0
Apr  8 06:08:09 localhost kernel:  [<c01371a0>] handle_IRQ_event+0x30/0x70
Apr  8 06:08:09 localhost kernel:  [<c0137940>] note_interrupt+0x70/0xb0
Apr  8 06:08:09 localhost kernel:  [<c0137313>] __do_IRQ+0x133/0x140
Apr  8 06:08:09 localhost kernel:  [<c0104cf9>] do_IRQ+0x19/0x30
Apr  8 06:08:09 localhost kernel:  [<c010322e>] common_interrupt+0x1a/0x20
Apr  8 06:08:09 localhost kernel: handlers:
Apr  8 06:08:09 localhost kernel: [<c02e44d0>] (usb_hcd_irq+0x0/0x70)
Apr  8 06:08:09 localhost kernel: [<c02b6e70>] (speedo_interrupt+0x0/0x230)
Apr  8 06:08:09 localhost kernel: Disabling IRQ #18
...
Apr  8 06:08:40 localhost kernel: NETDEV WATCHDOG: eth0: transmit timed out 

The output of /proc/interrupts:
           CPU0       CPU1       
  0:     120184     129949    IO-APIC-edge  timer
  1:        113         54    IO-APIC-edge  i8042
  7:          0          0    IO-APIC-edge  parport0
  9:          0          0   IO-APIC-level  acpi
 10:       7038       3544   IO-APIC-level  VIA686A
 11:        858          0   IO-APIC-level  uhci_hcd, uhci_hcd
 14:       4404       3709    IO-APIC-edge  ide0
 15:       1015       1062    IO-APIC-edge  ide1
 18:       6497         17   IO-APIC-level  ohci_hcd, eth0
 19:        478         72   IO-APIC-level  radeon@PCI:2:7:0
NMI:          0          0
LOC:     249903     250532
ERR:          0
MIS:          0 

The output of lspci:

0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x]
(rev c4)
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo
MVP3/Pro133x AGP]
0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South]
(rev 40)
0000:00:07.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 1a)
0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 1a)
0000:00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97
Audio Controller (rev 50)
0000:00:0f.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev08)
0000:00:10.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev08)
0000:00:11.0 PCI bridge: Texas Instruments PCI2031 (rev 01)
0000:00:13.0 USB Controller: OPTi Inc. 82C861 (rev 10)
0000:01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]
86C3265598/6326 (rev 0b)
0000:02:07.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon
9200PRO] (rev 01)
0000:02:07.1 Display controller: ATI Technologies Inc: Unknown device 5940 (rev01)

Whit kernel 2.6.11.7 it's abaut 10 minutes between i stopp the sound and
interrupt 11 is disabled but the problem is the same.
The syslog with kernel 2.6.11.7 and the argument pci=routeirq:

Apr 14 21:44:19 localhost kernel: irq 11: nobody cared!
Apr 14 21:44:19 localhost kernel:  [<c013783a>] __report_bad_irq+0x2a/0xa0
Apr 14 21:44:19 localhost kernel:  [<c01371a0>] handle_IRQ_event+0x30/0x70
Apr 14 21:44:19 localhost kernel:  [<c0137940>] note_interrupt+0x70/0xb0
Apr 14 21:44:19 localhost kernel:  [<c0137313>] __do_IRQ+0x133/0x140
Apr 14 21:44:19 localhost kernel:  [<c0104cf9>] do_IRQ+0x19/0x30
Apr 14 21:44:19 localhost kernel:  [<c010322e>] common_interrupt+0x1a/0x20
Apr 14 21:44:19 localhost kernel:  [<c01006d3>] default_idle+0x23/0x30
Apr 14 21:44:19 localhost kernel:  [<c010077f>] cpu_idle+0x5f/0x70
Apr 14 21:44:19 localhost kernel:  [<c04ee99d>] start_kernel+0x17d/0x1c0
Apr 14 21:44:19 localhost kernel:  [<c04ee390>] unknown_bootoption+0x0/0x1e0
Apr 14 21:44:19 localhost kernel: handlers:
Apr 14 21:44:19 localhost kernel: [<c02e44e0>] (usb_hcd_irq+0x0/0x70)
Apr 14 21:44:19 localhost kernel: [<c02e44e0>] (usb_hcd_irq+0x0/0x70)
Apr 14 21:44:19 localhost kernel: Disabling IRQ #11
...
Apr 14 22:13:01 localhost kernel: irq 10: nobody cared!
Apr 14 22:13:01 localhost kernel:  [<c013783a>] __report_bad_irq+0x2a/0xa0
Apr 14 22:13:01 localhost kernel:  [<c01371a0>] handle_IRQ_event+0x30/0x70
Apr 14 22:13:01 localhost kernel:  [<c0137940>] note_interrupt+0x70/0xb0
Apr 14 22:13:01 localhost kernel:  [<c0137313>] __do_IRQ+0x133/0x140
Apr 14 22:13:01 localhost kernel:  [<c0104cf9>] do_IRQ+0x19/0x30
Apr 14 22:13:01 localhost kernel:  [<c010322e>] common_interrupt+0x1a/0x20
Apr 14 22:13:01 localhost kernel:  [<c01006d3>] default_idle+0x23/0x30
Apr 14 22:13:01 localhost kernel:  [<c010077f>] cpu_idle+0x5f/0x70
Apr 14 22:13:01 localhost kernel:  [<c04ee99d>] start_kernel+0x17d/0x1c0
Apr 14 22:13:01 localhost kernel:  [<c04ee390>] unknown_bootoption+0x0/0x1e0
Apr 14 22:13:01 localhost kernel: handlers:
Apr 14 22:13:01 localhost kernel: [<c03471d0>] (snd_via82xx_interrupt+0x0/0xd0)
Apr 14 22:13:01 localhost kernel: Disabling IRQ #10
Apr 14 22:13:44 localhost kernel: eth0: TX underrun, threshold adjusted.
Apr 14 22:14:24 localhost last message repeated 17 times
Apr 14 22:14:53 localhost last message repeated 2 times
...
Apr 14 22:18:23 localhost kernel: irq 18: nobody cared!
Apr 14 22:18:23 localhost kernel:  [<c013783a>] __report_bad_irq+0x2a/0xa0
Apr 14 22:18:23 localhost kernel:  [<c01371a0>] handle_IRQ_event+0x30/0x70
Apr 14 22:18:23 localhost kernel:  [<c0137940>] note_interrupt+0x70/0xb0
Apr 14 22:18:23 localhost kernel:  [<c0137313>] __do_IRQ+0x133/0x140
Apr 14 22:18:23 localhost kernel:  [<c0104cf9>] do_IRQ+0x19/0x30
Apr 14 22:18:23 localhost kernel:  [<c010322e>] common_interrupt+0x1a/0x20
Apr 14 22:18:23 localhost kernel: handlers:
Apr 14 22:18:23 localhost kernel: [<c02e44e0>] (usb_hcd_irq+0x0/0x70)
Apr 14 22:18:23 localhost kernel: [<c02b6e80>] (speedo_interrupt+0x0/0x230)
Apr 14 22:18:23 localhost kernel: Disabling IRQ #18
Apr 14 22:18:32 localhost kernel: NETDEV WATCHDOG: eth0: transmit timed out
Apr 14 22:18:32 localhost kernel: eth0: Transmit timed out: status f048  0c00 at
669781/669841 command 000ca000.
Apr 14 22:18:38 localhost kernel: NETDEV WATCHDOG: eth0: transmit timed out
Apr 14 22:18:38 localhost kernel: eth0: Transmit timed out: status e050  0c00 at
669841/669901 command 0001a000.

It looks like an overflow... I have seen in bugzilla that some other users have
reported bugs that look like mine but with other symptomes:4311, 3808, 3257 It
could be the same probleme.
I hope i help you to make the kernel better! Sorry abaut my bad english...

If you understand german: I have opened a thread in debianforum.de:
http://www.debianforum.de/forum/viewtopic.php?t=44055

Greetings,
H.Diethelm

------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.


-------------------------------------------------------
SF.Net email is sponsored by: GoToMeeting - the easiest way to collaborate
online with coworkers and clients while avoiding the high cost of travel and
communications. There is no equipment to buy and you can meet as often as
you want. Try it free.http://ads.osdn.com/?ad_id=7402&alloc_id=16135&op=click

Re: Fw: [Bugme-new] [Bug 4496] New: Interrupt-problem depends on sound-playing: irq 10: nobody cared!

[Bjorn Helgaas]

On Wednesday 25 May 2005 11:43 pm, Andrew Morton wrote:
> This IRQ routing bug appears to be an ACPI thing.  Could someone
> please reassign it?
> ...
> Subject: [Bugme-new] [Bug 4496] New: Interrupt-problem depends on sound-playing: irq 10: nobody cared!
> http://bugme.osdl.org/show_bug.cgi?id=4496

The box has several VIA devices.  Can you please try 2.6.12-rc5-mm1?

If you're using PIC mode (not IOAPIC), you may also need the following
patch:

--- 2.6.12-rc3-mm3/drivers/pci/quirks.c.orig	2005-05-05 10:52:42.000000000 -0600
+++ 2.6.12-rc3-mm3/drivers/pci/quirks.c	2005-05-10 09:56:18.000000000 -0600
@@ -460,17 +460,6 @@
 
 
 /*
- * Via 686A/B:  The PCI_INTERRUPT_LINE register for the on-chip
- * devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature:
- * when written, it makes an internal connection to the PIC.
- * For these devices, this register is defined to be 4 bits wide.
- * Normally this is fine.  However for IO-APIC motherboards, or
- * non-x86 architectures (yes Via exists on PPC among other places),
- * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
- * interrupts delivered properly.
- */
-
-/*
  * FIXME: it is questionable that quirk_via_acpi
  * is needed.  It shows up as an ISA bridge, and does not
  * support the PCI_INTERRUPT_LINE register at all.  Therefore
@@ -492,28 +481,30 @@
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C586_3,	quirk_via_acpi );
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C686_4,	quirk_via_acpi );
 
-static void __devinit quirk_via_irqpic(struct pci_dev *dev)
+/*
+ * Via 686A/B:  The PCI_INTERRUPT_LINE register for the on-chip
+ * devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature:
+ * when written, it makes an internal connection to the PIC.
+ * For these devices, this register is defined to be 4 bits wide.
+ * Normally this is fine.  However for IO-APIC motherboards, or
+ * non-x86 architectures (yes Via exists on PPC among other places),
+ * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
+ * interrupts delivered properly.
+ */
+static void __devinit quirk_via_irq(struct pci_dev *dev)
 {
 	u8 irq, new_irq;
 
-#ifdef CONFIG_X86_IO_APIC
-	if (nr_ioapics && !skip_ioapic_setup)
-		return;
-#endif
-#ifdef CONFIG_ACPI
-	if (acpi_irq_model != ACPI_IRQ_MODEL_PIC)
-		return;
-#endif
 	new_irq = dev->irq & 0xf;
 	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
 	if (new_irq != irq) {
-		printk(KERN_INFO "PCI: Via PIC IRQ fixup for %s, from %d to %d\n",
+		printk(KERN_INFO "PCI: Via IRQ fixup for %s, from %d to %d\n",
 			pci_name(dev), irq, new_irq);
 		udelay(15);	/* unknown if delay really needed */
 		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
 	}
 }
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irqpic);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
 
 /*
  * PIIX3 USB: We have to disable USB interrupts that are



-------------------------------------------------------
This SF.Net email is sponsored by Yahoo.
Introducing Yahoo! Search Developer Network - Create apps using Yahoo!
Search APIs Find out how you can build Yahoo! directly into your own
Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005

Re: Fw: [Bugme-new] [Bug 4496] New: Interrupt-problem depends on sound-playing: irq 10: nobody cared!

[randy_dunlap]

On Thu, 26 May 2005 10:07:40 -0600 Bjorn Helgaas wrote:

| On Wednesday 25 May 2005 11:43 pm, Andrew Morton wrote:
| > This IRQ routing bug appears to be an ACPI thing.  Could someone
| > please reassign it?

I can do that, but Bjorn's patch makes it appear to be a PCI bug
rather than an ACPI bug.  Any clarification on that?


| > Subject: [Bugme-new] [Bug 4496] New: Interrupt-problem depends on sound-playing: irq 10: nobody cared!
| > http://bugme.osdl.org/show_bug.cgi?id=4496
| 
| The box has several VIA devices.  Can you please try 2.6.12-rc5-mm1?
| 
| If you're using PIC mode (not IOAPIC), you may also need the following
| patch:
| 
| --- 2.6.12-rc3-mm3/drivers/pci/quirks.c.orig	2005-05-05 10:52:42.000000000 -0600
| +++ 2.6.12-rc3-mm3/drivers/pci/quirks.c	2005-05-10 09:56:18.000000000 -0600
| @@ -460,17 +460,6 @@
|  
|  
|  /*
| - * Via 686A/B:  The PCI_INTERRUPT_LINE register for the on-chip
| - * devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature:
| - * when written, it makes an internal connection to the PIC.
| - * For these devices, this register is defined to be 4 bits wide.
| - * Normally this is fine.  However for IO-APIC motherboards, or
| - * non-x86 architectures (yes Via exists on PPC among other places),
| - * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
| - * interrupts delivered properly.
| - */
| -
| -/*
|   * FIXME: it is questionable that quirk_via_acpi
|   * is needed.  It shows up as an ISA bridge, and does not
|   * support the PCI_INTERRUPT_LINE register at all.  Therefore
| @@ -492,28 +481,30 @@
|  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C586_3,	quirk_via_acpi );
|  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C686_4,	quirk_via_acpi );
|  
| -static void __devinit quirk_via_irqpic(struct pci_dev *dev)
| +/*
| + * Via 686A/B:  The PCI_INTERRUPT_LINE register for the on-chip
| + * devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature:
| + * when written, it makes an internal connection to the PIC.
| + * For these devices, this register is defined to be 4 bits wide.
| + * Normally this is fine.  However for IO-APIC motherboards, or
| + * non-x86 architectures (yes Via exists on PPC among other places),
| + * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
| + * interrupts delivered properly.
| + */
| +static void __devinit quirk_via_irq(struct pci_dev *dev)
|  {
|  	u8 irq, new_irq;
|  
| -#ifdef CONFIG_X86_IO_APIC
| -	if (nr_ioapics && !skip_ioapic_setup)
| -		return;
| -#endif
| -#ifdef CONFIG_ACPI
| -	if (acpi_irq_model != ACPI_IRQ_MODEL_PIC)
| -		return;
| -#endif
|  	new_irq = dev->irq & 0xf;
|  	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
|  	if (new_irq != irq) {
| -		printk(KERN_INFO "PCI: Via PIC IRQ fixup for %s, from %d to %d\n",
| +		printk(KERN_INFO "PCI: Via IRQ fixup for %s, from %d to %d\n",
|  			pci_name(dev), irq, new_irq);
|  		udelay(15);	/* unknown if delay really needed */
|  		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
|  	}
|  }
| -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irqpic);
| +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
|  
|  /*
|   * PIIX3 USB: We have to disable USB interrupts that are


---
~Randy


-------------------------------------------------------
This SF.Net email is sponsored by Yahoo.
Introducing Yahoo! Search Developer Network - Create apps using Yahoo!
Search APIs Find out how you can build Yahoo! directly into your own
Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005

Re: Fw: [Bugme-new] [Bug 4496] New: Interrupt-problem depends on sound-playing: irq 10: nobody cared!

[Andrew Morton]

randy_dunlap <rdunlap-/UHa2rfvQTnk1uMJSBkQmQ@public.gmane.org> wrote:
>
>  On Thu, 26 May 2005 10:07:40 -0600 Bjorn Helgaas wrote:
> 
>  | On Wednesday 25 May 2005 11:43 pm, Andrew Morton wrote:
>  | > This IRQ routing bug appears to be an ACPI thing.  Could someone
>  | > please reassign it?
> 
>  I can do that, but Bjorn's patch makes it appear to be a PCI bug
>  rather than an ACPI bug.  Any clarification on that?

OK, let's leave it as-is.  Hopefulls Hannes can test that patch soon.


-------------------------------------------------------
This SF.Net email is sponsored by Yahoo.
Introducing Yahoo! Search Developer Network - Create apps using Yahoo!
Search APIs Find out how you can build Yahoo! directly into your own
Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005

Re: Fw: [Bugme-new] [Bug 4496] New: Interrupt-problem depends on sound-playing: irq 10: nobody cared!

[Andrew Morton]

Andrew Morton <akpm-3NddpPZAyC0@public.gmane.org> wrote:
>
> randy_dunlap <rdunlap-/UHa2rfvQTnk1uMJSBkQmQ@public.gmane.org> wrote:
> >
> >  On Thu, 26 May 2005 10:07:40 -0600 Bjorn Helgaas wrote:
> > 
> >  | On Wednesday 25 May 2005 11:43 pm, Andrew Morton wrote:
> >  | > This IRQ routing bug appears to be an ACPI thing.  Could someone
> >  | > please reassign it?
> > 
> >  I can do that, but Bjorn's patch makes it appear to be a PCI bug
> >  rather than an ACPI bug.  Any clarification on that?
> 
> OK, let's leave it as-is.  Hopefulls Hannes can test that patch soon.

Uh, Bjorn has been playing games with email headers.  I meant this patch.

Hannes, if you could test this with 2.6.12-rc5-mm1, that would be really
good.

Bjorn, do you think we should generate a versus-2.6.12-rc5 version of this?



From: Bjorn Helgaas <bjorn.helgaas-VXdhtT5mjnY@public.gmane.org>

At least some VIA chipsets require the fixup even in IO-APIC mode.

This was found and debugged with the patient assistance of Stian
Jordet <liste-NI9zH3lwcMKHXe+LvDLADg@public.gmane.org> on an Asus CUV266-DLS motherboard.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas-VXdhtT5mjnY@public.gmane.org>
Signed-off-by: Andrew Morton <akpm-3NddpPZAyC0@public.gmane.org>
---

 drivers/pci/quirks.c |   35 +++++++++++++----------------------
 1 files changed, 13 insertions(+), 22 deletions(-)

diff -puN drivers/pci/quirks.c~pci-do-via-irq-fixup-always-not-just-in-pic-mode drivers/pci/quirks.c
--- 25/drivers/pci/quirks.c~pci-do-via-irq-fixup-always-not-just-in-pic-mode	2005-05-26 14:14:15.000000000 -0700
+++ 25-akpm/drivers/pci/quirks.c	2005-05-26 14:14:15.000000000 -0700
@@ -467,17 +467,6 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SE
 
 
 /*
- * Via 686A/B:  The PCI_INTERRUPT_LINE register for the on-chip
- * devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature:
- * when written, it makes an internal connection to the PIC.
- * For these devices, this register is defined to be 4 bits wide.
- * Normally this is fine.  However for IO-APIC motherboards, or
- * non-x86 architectures (yes Via exists on PPC among other places),
- * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
- * interrupts delivered properly.
- */
-
-/*
  * FIXME: it is questionable that quirk_via_acpi
  * is needed.  It shows up as an ISA bridge, and does not
  * support the PCI_INTERRUPT_LINE register at all.  Therefore
@@ -499,28 +488,30 @@ static void __devinit quirk_via_acpi(str
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C586_3,	quirk_via_acpi );
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C686_4,	quirk_via_acpi );
 
-static void __devinit quirk_via_irqpic(struct pci_dev *dev)
+/*
+ * Via 686A/B:  The PCI_INTERRUPT_LINE register for the on-chip
+ * devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature:
+ * when written, it makes an internal connection to the PIC.
+ * For these devices, this register is defined to be 4 bits wide.
+ * Normally this is fine.  However for IO-APIC motherboards, or
+ * non-x86 architectures (yes Via exists on PPC among other places),
+ * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
+ * interrupts delivered properly.
+ */
+static void __devinit quirk_via_irq(struct pci_dev *dev)
 {
 	u8 irq, new_irq;
 
-#ifdef CONFIG_X86_IO_APIC
-	if (nr_ioapics && !skip_ioapic_setup)
-		return;
-#endif
-#ifdef CONFIG_ACPI
-	if (acpi_irq_model != ACPI_IRQ_MODEL_PIC)
-		return;
-#endif
 	new_irq = dev->irq & 0xf;
 	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
 	if (new_irq != irq) {
-		printk(KERN_INFO "PCI: Via PIC IRQ fixup for %s, from %d to %d\n",
+		printk(KERN_INFO "PCI: Via IRQ fixup for %s, from %d to %d\n",
 			pci_name(dev), irq, new_irq);
 		udelay(15);	/* unknown if delay really needed */
 		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
 	}
 }
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irqpic);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
 
 /*
  * PIIX3 USB: We have to disable USB interrupts that are
_



-------------------------------------------------------
This SF.Net email is sponsored by Yahoo.
Introducing Yahoo! Search Developer Network - Create apps using Yahoo!
Search APIs Find out how you can build Yahoo! directly into your own
Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005

Re: Fw: [Bugme-new] [Bug 4496] New: Interrupt-problem depends on sound-playing: irq 10: nobody cared!

[Bjorn Helgaas]

On Thursday 26 May 2005 3:16 pm, Andrew Morton wrote:
> Andrew Morton <akpm-3NddpPZAyC0@public.gmane.org> wrote:
> >
> > randy_dunlap <rdunlap-/UHa2rfvQTnk1uMJSBkQmQ@public.gmane.org> wrote:
> > >
> > >  On Thu, 26 May 2005 10:07:40 -0600 Bjorn Helgaas wrote:
> > > 
> > >  | On Wednesday 25 May 2005 11:43 pm, Andrew Morton wrote:
> > >  | > This IRQ routing bug appears to be an ACPI thing.  Could someone
> > >  | > please reassign it?
> > > 
> > >  I can do that, but Bjorn's patch makes it appear to be a PCI bug
> > >  rather than an ACPI bug.  Any clarification on that?
> > 
> > OK, let's leave it as-is.  Hopefulls Hannes can test that patch soon.
> 
> Uh, Bjorn has been playing games with email headers.  I meant this patch.

I did?  I'm bewildered.

> Hannes, if you could test this with 2.6.12-rc5-mm1, that would be really
> good.

There are three patches in the air:

    1) http://linux-acpi.bkbits.net:8080/26-latest-test/cset%404244603cD6KfNrnIjyYDqv0xzdI8cQ
       This replaces quirk_via_bridge() with quirk_via_irqpic().
       quirk_via_irqpic() does nothing unless we're in PIC mode.
       This has been in -mm for quite a while (as part of
       bk-acpi.patch).  It is not in 2.6.12-rc5, but Len
       promised to email it to Linus today.

    2) pci-do-via-irq-fixup-always-not-just-in-pic-mode.patch
       This makes quirk_via_irqpic() do its thing always, even
       in IOAPIC mode, and changes its name to quirk_via_irq().
       This was added to -mm just minutes ago (it's not in
       2.6.12-rc5-mm1).

    3) "quirk_via_irqpic() must not be __devinit for S1"
       This is from Alexander Nyberg on LKML today and removes
       __devinit from quirk_via_irqpic().  This should go
       into -mm as well, although it won't apply cleanly
       on top of 2) because of the rename.

So Hannes should test with 2.6.12-rc5-mm1.  If he is running in
IOAPIC mode, he may need patch 2) as well.  Patch 3 should be
irrelevant for his test.

> Bjorn, do you think we should generate a versus-2.6.12-rc5 version of this?

Assuming you're referring to the patch below, it depends on part 1)
above, which isn't in 2.6.12-rc5, so we can't.

> From: Bjorn Helgaas <bjorn.helgaas-VXdhtT5mjnY@public.gmane.org>
> 
> At least some VIA chipsets require the fixup even in IO-APIC mode.
> 
> This was found and debugged with the patient assistance of Stian
> Jordet <liste-NI9zH3lwcMKHXe+LvDLADg@public.gmane.org> on an Asus CUV266-DLS motherboard.
> 
> Signed-off-by: Bjorn Helgaas <bjorn.helgaas-VXdhtT5mjnY@public.gmane.org>
> Signed-off-by: Andrew Morton <akpm-3NddpPZAyC0@public.gmane.org>
> ---
> 
>  drivers/pci/quirks.c |   35 +++++++++++++----------------------
>  1 files changed, 13 insertions(+), 22 deletions(-)
> 
> diff -puN drivers/pci/quirks.c~pci-do-via-irq-fixup-always-not-just-in-pic-mode drivers/pci/quirks.c
> --- 25/drivers/pci/quirks.c~pci-do-via-irq-fixup-always-not-just-in-pic-mode	2005-05-26 14:14:15.000000000 -0700
> +++ 25-akpm/drivers/pci/quirks.c	2005-05-26 14:14:15.000000000 -0700
> @@ -467,17 +467,6 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SE
>  
>  
>  /*
> - * Via 686A/B:  The PCI_INTERRUPT_LINE register for the on-chip
> - * devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature:
> - * when written, it makes an internal connection to the PIC.
> - * For these devices, this register is defined to be 4 bits wide.
> - * Normally this is fine.  However for IO-APIC motherboards, or
> - * non-x86 architectures (yes Via exists on PPC among other places),
> - * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
> - * interrupts delivered properly.
> - */
> -
> -/*
>   * FIXME: it is questionable that quirk_via_acpi
>   * is needed.  It shows up as an ISA bridge, and does not
>   * support the PCI_INTERRUPT_LINE register at all.  Therefore
> @@ -499,28 +488,30 @@ static void __devinit quirk_via_acpi(str
>  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C586_3,	quirk_via_acpi );
>  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C686_4,	quirk_via_acpi );
>  
> -static void __devinit quirk_via_irqpic(struct pci_dev *dev)
> +/*
> + * Via 686A/B:  The PCI_INTERRUPT_LINE register for the on-chip
> + * devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature:
> + * when written, it makes an internal connection to the PIC.
> + * For these devices, this register is defined to be 4 bits wide.
> + * Normally this is fine.  However for IO-APIC motherboards, or
> + * non-x86 architectures (yes Via exists on PPC among other places),
> + * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
> + * interrupts delivered properly.
> + */
> +static void __devinit quirk_via_irq(struct pci_dev *dev)
>  {
>  	u8 irq, new_irq;
>  
> -#ifdef CONFIG_X86_IO_APIC
> -	if (nr_ioapics && !skip_ioapic_setup)
> -		return;
> -#endif
> -#ifdef CONFIG_ACPI
> -	if (acpi_irq_model != ACPI_IRQ_MODEL_PIC)
> -		return;
> -#endif
>  	new_irq = dev->irq & 0xf;
>  	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
>  	if (new_irq != irq) {
> -		printk(KERN_INFO "PCI: Via PIC IRQ fixup for %s, from %d to %d\n",
> +		printk(KERN_INFO "PCI: Via IRQ fixup for %s, from %d to %d\n",
>  			pci_name(dev), irq, new_irq);
>  		udelay(15);	/* unknown if delay really needed */
>  		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
>  	}
>  }
> -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irqpic);
> +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
>  
>  /*
>   * PIIX3 USB: We have to disable USB interrupts that are
> _
> 
> 


-------------------------------------------------------
This SF.Net email is sponsored by Yahoo.
Introducing Yahoo! Search Developer Network - Create apps using Yahoo!
Search APIs Find out how you can build Yahoo! directly into your own
Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005

Re: Fw: [Bugme-new] [Bug 4496] New: Interrupt-problem depends on sound-playing: irq 10: nobody cared!

[Hannes Diethelm]

[-- Attachment #1: Type: text/plain, Size: 7763 bytes --]

Am Donnerstag, den 26.05.2005, 15:46 -0600 schrieb Bjorn Helgaas:
> On Thursday 26 May 2005 3:16 pm, Andrew Morton wrote:
> > Andrew Morton <akpm-3NddpPZAyC0@public.gmane.org> wrote:
> > >
> > > randy_dunlap <rdunlap-/UHa2rfvQTnk1uMJSBkQmQ@public.gmane.org> wrote:
> > > >
> > > >  On Thu, 26 May 2005 10:07:40 -0600 Bjorn Helgaas wrote:
> > > > 
> > > >  | On Wednesday 25 May 2005 11:43 pm, Andrew Morton wrote:
> > > >  | > This IRQ routing bug appears to be an ACPI thing.  Could someone
> > > >  | > please reassign it?
> > > > 
> > > >  I can do that, but Bjorn's patch makes it appear to be a PCI bug
> > > >  rather than an ACPI bug.  Any clarification on that?
> > > 
> > > OK, let's leave it as-is.  Hopefulls Hannes can test that patch soon.
> > 
> > Uh, Bjorn has been playing games with email headers.  I meant this patch.
> 
> I did?  I'm bewildered.
> 
> > Hannes, if you could test this with 2.6.12-rc5-mm1, that would be really
> > good.
> 
> There are three patches in the air:
> 
>     1) http://linux-acpi.bkbits.net:8080/26-latest-test/cset%404244603cD6KfNrnIjyYDqv0xzdI8cQ
>        This replaces quirk_via_bridge() with quirk_via_irqpic().
>        quirk_via_irqpic() does nothing unless we're in PIC mode.
>        This has been in -mm for quite a while (as part of
>        bk-acpi.patch).  It is not in 2.6.12-rc5, but Len
>        promised to email it to Linus today.
> 
>     2) pci-do-via-irq-fixup-always-not-just-in-pic-mode.patch
>        This makes quirk_via_irqpic() do its thing always, even
>        in IOAPIC mode, and changes its name to quirk_via_irq().
>        This was added to -mm just minutes ago (it's not in
>        2.6.12-rc5-mm1).
> 
>     3) "quirk_via_irqpic() must not be __devinit for S1"
>        This is from Alexander Nyberg on LKML today and removes
>        __devinit from quirk_via_irqpic().  This should go
>        into -mm as well, although it won't apply cleanly
>        on top of 2) because of the rename.
> 
> So Hannes should test with 2.6.12-rc5-mm1.  If he is running in
> IOAPIC mode, he may need patch 2) as well.  Patch 3 should be
> irrelevant for his test.
> 

Ok, i'm running 2.6.12-rc5-mm1 now. I've tryed your patches but i'm not
able to aply those patches...
The patch below:

hannes@linux-server:/usr/src/eigene_kernel/linux-2.6.12-rc5$ patch -p1
--dry-run <  /home/hannes/Programme/Kernel/patch2005.05.26.diff patching
file drivers/pci/quirks.c
patch unexpectedly ends in middle of line
Hunk #2 FAILED at 488.
1 out of 2 hunks FAILED -- saving rejects to file
drivers/pci/quirks.c.rej

and the other patch
( http://linux-acpi.bkbits.net:8080/26-latest-test/cset%
404244603cD6KfNrnIjyYDqv0xzdI8cQ ):

hannes@linux-server:/usr/src/eigene_kernel/linux-2.6.12-rc5$ patch -p1
--dry-run <  /home/hannes/Programme/Kernel/Patch2005-03-25.diff
patching file arch/i386/pci/irq.c
Reversed (or previously applied) patch detected!  Assume -R? [n] y
Hunk #1 succeeded at 1078 (offset 52 lines).
Hunk #2 succeeded at 1133 with fuzz 2 (offset 51 lines).
patching file drivers/acpi/pci_irq.c
Reversed (or previously applied) patch detected!  Assume -R? [n] y
patching file drivers/pci/quirks.c
Reversed (or previously applied) patch detected!  Assume -R? [n] y
Hunk #1 succeeded at 18 with fuzz 2.
Hunk #2 succeeded at 474 (offset 12 lines).
Hunk #3 succeeded at 501 (offset 12 lines).
Hunk #4 succeeded at 690 (offset 12 lines).
patch unexpectedly ends in middle of line
patch unexpectedly ends in middle of line

The error is nearly the same but the kernel now deactivates not realy
used interrupts and i can use my mouse and network after crash :) The
creach apears emedliatly after starting sound... 

Ateatchments: All abaut my Kernel (Only kernel 2.6.12-rc5 and mm1
patch) ;)

I think it could be also a problem of my special Hardware...
First i've installed linux on this machine I had segfaults all the time
becaus the ram was in bank 1 and 2. No it is in bank 0 and 1 and i've no
more problems like this...

> > Bjorn, do you think we should generate a versus-2.6.12-rc5 version of this?
> 
> Assuming you're referring to the patch below, it depends on part 1)
> above, which isn't in 2.6.12-rc5, so we can't.
> 
> > From: Bjorn Helgaas <bjorn.helgaas-VXdhtT5mjnY@public.gmane.org>
> > 
> > At least some VIA chipsets require the fixup even in IO-APIC mode.
> > 
> > This was found and debugged with the patient assistance of Stian
> > Jordet <liste-NI9zH3lwcMKHXe+LvDLADg@public.gmane.org> on an Asus CUV266-DLS motherboard.
> > 
> > Signed-off-by: Bjorn Helgaas <bjorn.helgaas-VXdhtT5mjnY@public.gmane.org>
> > Signed-off-by: Andrew Morton <akpm-3NddpPZAyC0@public.gmane.org>
> > ---
> > 
> >  drivers/pci/quirks.c |   35 +++++++++++++----------------------
> >  1 files changed, 13 insertions(+), 22 deletions(-)
> > 
> > diff -puN drivers/pci/quirks.c~pci-do-via-irq-fixup-always-not-just-in-pic-mode drivers/pci/quirks.c
> > --- 25/drivers/pci/quirks.c~pci-do-via-irq-fixup-always-not-just-in-pic-mode	2005-05-26 14:14:15.000000000 -0700
> > +++ 25-akpm/drivers/pci/quirks.c	2005-05-26 14:14:15.000000000 -0700
> > @@ -467,17 +467,6 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SE
> >  
> >  
> >  /*
> > - * Via 686A/B:  The PCI_INTERRUPT_LINE register for the on-chip
> > - * devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature:
> > - * when written, it makes an internal connection to the PIC.
> > - * For these devices, this register is defined to be 4 bits wide.
> > - * Normally this is fine.  However for IO-APIC motherboards, or
> > - * non-x86 architectures (yes Via exists on PPC among other places),
> > - * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
> > - * interrupts delivered properly.
> > - */
> > -
> > -/*
> >   * FIXME: it is questionable that quirk_via_acpi
> >   * is needed.  It shows up as an ISA bridge, and does not
> >   * support the PCI_INTERRUPT_LINE register at all.  Therefore
> > @@ -499,28 +488,30 @@ static void __devinit quirk_via_acpi(str
> >  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C586_3,	quirk_via_acpi );
> >  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C686_4,	quirk_via_acpi );
> >  
> > -static void __devinit quirk_via_irqpic(struct pci_dev *dev)
> > +/*
> > + * Via 686A/B:  The PCI_INTERRUPT_LINE register for the on-chip
> > + * devices, USB0/1, AC97, MC97, and ACPI, has an unusual feature:
> > + * when written, it makes an internal connection to the PIC.
> > + * For these devices, this register is defined to be 4 bits wide.
> > + * Normally this is fine.  However for IO-APIC motherboards, or
> > + * non-x86 architectures (yes Via exists on PPC among other places),
> > + * we must mask the PCI_INTERRUPT_LINE value versus 0xf to get
> > + * interrupts delivered properly.
> > + */
> > +static void __devinit quirk_via_irq(struct pci_dev *dev)
> >  {
> >  	u8 irq, new_irq;
> >  
> > -#ifdef CONFIG_X86_IO_APIC
> > -	if (nr_ioapics && !skip_ioapic_setup)
> > -		return;
> > -#endif
> > -#ifdef CONFIG_ACPI
> > -	if (acpi_irq_model != ACPI_IRQ_MODEL_PIC)
> > -		return;
> > -#endif
> >  	new_irq = dev->irq & 0xf;
> >  	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
> >  	if (new_irq != irq) {
> > -		printk(KERN_INFO "PCI: Via PIC IRQ fixup for %s, from %d to %d\n",
> > +		printk(KERN_INFO "PCI: Via IRQ fixup for %s, from %d to %d\n",
> >  			pci_name(dev), irq, new_irq);
> >  		udelay(15);	/* unknown if delay really needed */
> >  		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
> >  	}
> >  }
> > -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irqpic);
> > +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
> >  
> >  /*
> >   * PIIX3 USB: We have to disable USB interrupts that are
> > _
> > 
> > 

[-- Attachment #2: kconfig.txt --]
[-- Type: text/plain, Size: 34583 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12-rc5-mm1
# Mon May 30 21:56:13 2005
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_CPUSETS is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
# CONFIG_SCHED_SMT is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
CONFIG_HAVE_DEC_LOCK=y
# CONFIG_REGPARM is not set
CONFIG_SECCOMP=y

#
# Performance-monitoring counters support
#
# CONFIG_PERFCTR is not set
CONFIG_PHYSICAL_START=0x100000
# CONFIG_KEXEC is not set

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_HOTKEY=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_IBM=m
CONFIG_ACPI_TOSHIBA=m
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set
# CONFIG_ACPI_CONTAINER is not set

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_HOTPLUG_CPU is not set

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m

#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
CONFIG_FORK_CONNECTOR=y

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_1284 is not set

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
# CONFIG_PNPBIOS_PROC_FS is not set
CONFIG_PNPACPI=y

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_LBD=y
# CONFIG_CDROM_PKTCDVD is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=y
# CONFIG_IP_NF_CT_ACCT is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_CT_PROTO_SCTP is not set
# CONFIG_IP_NF_FTP is not set
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_LIMIT=y
CONFIG_IP_NF_MATCH_IPRANGE=y
CONFIG_IP_NF_MATCH_MAC=y
CONFIG_IP_NF_MATCH_PKTTYPE=y
CONFIG_IP_NF_MATCH_MARK=y
CONFIG_IP_NF_MATCH_MULTIPORT=y
CONFIG_IP_NF_MATCH_TOS=y
CONFIG_IP_NF_MATCH_RECENT=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_DSCP=y
CONFIG_IP_NF_MATCH_AH_ESP=y
CONFIG_IP_NF_MATCH_LENGTH=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_MATCH_TCPMSS=y
CONFIG_IP_NF_MATCH_HELPER=y
CONFIG_IP_NF_MATCH_STATE=y
CONFIG_IP_NF_MATCH_CONNTRACK=y
CONFIG_IP_NF_MATCH_OWNER=y
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
# CONFIG_IP_NF_MATCH_SCTP is not set
# CONFIG_IP_NF_MATCH_COMMENT is not set
# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_IP_NF_TARGET_TCPMSS=y
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_SAME=y
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_TOS=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_DSCP=y
CONFIG_IP_NF_TARGET_MARK=y
CONFIG_IP_NF_TARGET_CLASSIFY=y
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
CONFIG_ATALK=y
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_KGDBOE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=y
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=y
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
CONFIG_DRM_SIS=m
# CONFIG_DRM_VIA is not set
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# TPM devices
#
# CONFIG_TCG_TPM is not set

#
# I2C support
#
CONFIG_I2C=y
# CONFIG_I2C_CHARDEV is not set

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_ISA=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=m
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set

#
# Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=y
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
CONFIG_SENSORS_VIA686A=y
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set

#
# Other I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set

#
# Logo configuration
#
# CONFIG_LOGO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# ISA devices
#
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_VIA82XX=y
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_HDA_INTEL is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set

#
# Video4Linux support is needed for USB Multimedia device support
#

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
CONFIG_USB_MON=y

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_TEST is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# SN Devices
#

#
# Distributed Lock Manager
#
# CONFIG_DLM is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISER4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set

#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y

#
# Caches
#
# CONFIG_FSCACHE is not set
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
# CONFIG_RELAYFS_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_HFS_FS=y
CONFIG_HFSPLUS_FS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-15"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_EARLY_PRINTK=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Hardware crypto devices
#

#
# Library routines
#
CONFIG_CRC_CCITT=m
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_PC=y

[-- Attachment #3: dmesg.txt --]
[-- Type: text/plain, Size: 15456 bytes --]

Linux version 2.6.12-rc5-mm1 (hannes@linux-server) (gcc-Version 3.3.5 (Debian 1:3.3.5-12)) #1 SMP Mon May 30 22:10:29 CEST 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
511MB LOWMEM available.
found SMP MP-table at 000f5290
On node 0 totalpages: 131056
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126960 pages, LIFO batch:31
  HighMem zone: 0 pages, LIFO batch:1
DMI not present.
ACPI: RSDP (v000 VIA694                                ) @ 0x000f6590
ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: MADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff57c0
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:8 APIC version 17
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:8 APIC version 17
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
Built 1 zonelists
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
Kernel command line: root=/dev/hda1 ro vga=791
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 868.764 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 514100k/524224k available (3016k kernel code, 9636k reserved, 1162k data, 240k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1740.76 BogoMIPS (lpj=3481526)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel Pentium III (Coppermine) stepping 0a
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 1737.51 BogoMIPS (lpj=3475026)
CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Pentium III (Coppermine) stepping 0a
Total of 2 processors activated (3478.27 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Subsystem revision 20050408
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
audit: initializing netlink socket (disabled)
audit(1117484504.316:1): initialized
inotify device minor=63
Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org).
NTFS driver 2.1.23-WIP [Flags: R/O].
PCI: Enabling Via external APIC routing
vesafb: framebuffer at 0xd9000000, mapped to 0xe0880000, using 3072k, total 4096k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c7d6:0000
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
lp: driver loaded but no devices found
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA Apollo Pro 133 chipset
agpgart: AGP aperture is 64M @ 0xd0000000
cn_fork is registered
PNP: PS/2 controller doesn't have AUX irq; using default 0xc
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
lp0: using parport0 (interrupt-driven).
parport_pc: VIA parallel port: io=0x378, irq=7
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw-5bpFXmC1L3aJ4eUNlOKu3Q@public.gmane.org> and others
ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 16
eth0: 0000:00:0f.0, 00:08:9B:09:A9:4B, IRQ 16.
  Board assembly 729757-006, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 17
eth1: 0000:00:10.0, 00:08:9B:09:A9:4C, IRQ 17.
  Board assembly 729757-006, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
    ide0: BM-DMA at 0xcc00-0xcc07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: Maxtor 6B160P0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: PLEXTOR DVDR PX-716A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 1024KiB
hda: 320173056 sectors (163928 MB) w/8192KiB Cache, CHS=19929/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
ide-disk: probe of 1.0 failed with error 1
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
usbmon: debugs is not available
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 16
ohci_hcd 0000:00:13.0: OPTi Inc. 82C861
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: irq 16, io mem 0xd9a02000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 18
uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:07.2: irq 18, io base 0x0000b000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 18
uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:07.3: irq 18, io base 0x0000b400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-1: new low speed USB device using ohci_hcd and address 2
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
Advanced Linux Sound Architecture Driver Version 1.0.9rc3  (Thu Mar 24 10:33:39 2005 UTC).
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:07.5 to 64
input: AT Translated Set 2 keyboard on isa0060/serio0
ALSA device list:
  #0: VIA 82C686A/B rev50 with ALC200,200P at 0xb800, irq 19
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 32Kbytes
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 6, 393216 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 212 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.2: Stephen Frost <sfrost-vhD3WmCyG/PR7s880joybQ@public.gmane.org>.  http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 5
Starting balanced_irq
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
kjournald starting.  Commit interval 5 seconds
Freeing unused kernel memory: 240k freed
Adding 1510068k swap on /dev/hda7.  Priority:-1 extents:1
EXT3 FS on hda1, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 19 (level, low) -> IRQ 20
[drm] Initialized radeon 1.16.0 20050311 on minor 0: ATI Technologies Inc RV280 [Radeon 9200 PRO]
[drm] Loading R200 Microcode
irq 18: nobody cared (try booting with the "irqpoll" option.
 [<c014117a>] __report_bad_irq+0x2a/0xa0
 [<c01409a0>] handle_IRQ_event+0x30/0x70
 [<c0141290>] note_interrupt+0x80/0xf0
 [<c0140b1c>] __do_IRQ+0x13c/0x140
 [<c0105969>] do_IRQ+0x19/0x30
 [<c0103b62>] common_interrupt+0x1a/0x20
 [<c0100d70>] default_idle+0x0/0x30
 [<c0100d93>] default_idle+0x23/0x30
 [<c0100e60>] cpu_idle+0x80/0x90
handlers:
[<c02f9760>] (usb_hcd_irq+0x0/0x70)
[<c02f9760>] (usb_hcd_irq+0x0/0x70)
Disabling IRQ #18
irq 20: nobody cared (try booting with the "irqpoll" option.
 [<c014117a>] __report_bad_irq+0x2a/0xa0
 [<c01409a0>] handle_IRQ_event+0x30/0x70
 [<c0141290>] note_interrupt+0x80/0xf0
 [<c0140b1c>] __do_IRQ+0x13c/0x140
 [<c0105969>] do_IRQ+0x19/0x30
 [<c0103b62>] common_interrupt+0x1a/0x20
 [<c03f1323>] _read_lock+0x13/0x80
 [<c03a8ac3>] established_get_next+0xf3/0x130
 [<c03a8b3c>] established_get_idx+0x3c/0x50
 [<c03a8bf8>] tcp_get_idx+0xa8/0xe0
 [<c03a8c88>] tcp_seq_start+0x58/0x60
 [<c018453e>] seq_read+0xce/0x2e0
 [<c0161d86>] vfs_read+0xb6/0x180
 [<c0162111>] sys_read+0x51/0x80
 [<c01031a5>] syscall_call+0x7/0xb
handlers:
[<e0c56e20>] (radeon_driver_irq_handler+0x0/0xc0 [radeon])
Disabling IRQ #20
Unable to handle kernel paging request at virtual address b588f060
 printing eip:
c03354f7
*pde = 0a6d6067
*pte = 00000000
Oops: 0000 [#1]
PREEMPT SMP 
Modules linked in: radeon drm
CPU:    1
EIP:    0060:[<c03354f7>]    Not tainted VLI
EFLAGS: 00210286   (2.6.12-rc5-mm1) 
EIP is at snd_pcm_mmap_data_close+0x7/0x12
eax: b588f000   ebx: c03354f0   ecx: d9351f40   edx: cb5ede58
esi: df73aec4   edi: d9351f40   ebp: ca308b70   esp: c9a81f40
ds: 007b   es: 007b   ss: 0068
Process xmms (pid: 4861, threadinfo=c9a80000 task=cc0bfa90)
Stack: c01542b6 ca308b70 ca308b98 df73ae98 00000000 dfa04300 ca308b70 dfa04300 
       c0155c2f ca308b70 ca308b70 b588f000 b587f000 c015604b dfa04300 ca308b70 
       cb5edc20 b587f000 b588f000 cb5edc20 dfa04300 dfa04330 00000002 c9a80000 
Call Trace:
 [<c01542b6>] remove_vm_struct+0x96/0xa0
 [<c0155c2f>] unmap_vma_list+0x1f/0x30
 [<c015604b>] do_munmap+0x11b/0x150
 [<c01560c5>] sys_munmap+0x45/0x70
 [<c01031a5>] syscall_call+0x7/0xb
Code: 00 00 00 00 8b 44 24 04 8b 40 50 8b 40 60 f0 ff 80 a4 00 00 00 c3 8d b4 26 00 00 00 00 8d bc 27 00 00 00 00 8b 44 24 04 8b 40 50 <8b> 40 60 f0 ff 88 a4 00 00 00 c3 51 52 e8 37 b8 0b 00 5a 59 e9 
 

[-- Attachment #4: interupts.txt --]
[-- Type: text/plain, Size: 672 bytes --]

           CPU0       CPU1       
  0:     137686     134007    IO-APIC-edge  timer
  1:       1447       1072    IO-APIC-edge  i8042
  7:          0          0    IO-APIC-edge  parport0
  9:          0          0   IO-APIC-level  acpi
 14:       8871       6886    IO-APIC-edge  ide0
 15:       4884       4681    IO-APIC-edge  ide1
 16:      68397         12   IO-APIC-level  ohci_hcd:usb1, eth0
 18:        460      99540   IO-APIC-level  uhci_hcd:usb2, uhci_hcd:usb3
 19:      64988      57652   IO-APIC-level  VIA686A
 20:        297     199703   IO-APIC-level  radeon@PCI:2:7:0
NMI:          0          0 
LOC:     271639     271636 
ERR:          0
MIS:          0

Re: Fw: [Bugme-new] [Bug 4496] New: Interrupt-problem depends on sound-playing: irq 10: nobody cared!

[Bjorn Helgaas]

On Monday 30 May 2005 2:48 pm, Hannes Diethelm wrote:
> Ok, i'm running 2.6.12-rc5-mm1 now. I've tryed your patches but i'm not
> able to aply those patches...

At least one of the patches you tried to apply was already
in 2.6.12-rc5-mm1, so that caused some rejects.

Can you start again with 2.6.12-rc5-mm1, and apply the following
patch?

Thanks for your helpful testing reports.  I really appreciate the
work you're doing.

Bjorn


--- 2.6.12-rc5-mm1/drivers/pci/quirks.c.orig	2005-05-31 09:42:17.000000000 -0600
+++ 2.6.12-rc5-mm1/drivers/pci/quirks.c	2005-05-31 09:44:07.000000000 -0600
@@ -499,28 +499,20 @@
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C586_3,	quirk_via_acpi );
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C686_4,	quirk_via_acpi );
 
-static void __devinit quirk_via_irqpic(struct pci_dev *dev)
+static void quirk_via_irq(struct pci_dev *dev)
 {
 	u8 irq, new_irq;
 
-#ifdef CONFIG_X86_IO_APIC
-	if (nr_ioapics && !skip_ioapic_setup)
-		return;
-#endif
-#ifdef CONFIG_ACPI
-	if (acpi_irq_model != ACPI_IRQ_MODEL_PIC)
-		return;
-#endif
 	new_irq = dev->irq & 0xf;
 	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
 	if (new_irq != irq) {
-		printk(KERN_INFO "PCI: Via PIC IRQ fixup for %s, from %d to %d\n",
+		printk(KERN_INFO "PCI: Via IRQ fixup for %s, from %d to %d\n",
 			pci_name(dev), irq, new_irq);
 		udelay(15);	/* unknown if delay really needed */
 		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
 	}
 }
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irqpic);
+DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
 
 /*
  * PIIX3 USB: We have to disable USB interrupts that are



-------------------------------------------------------
This SF.Net email is sponsored by Yahoo.
Introducing Yahoo! Search Developer Network - Create apps using Yahoo!
Search APIs Find out how you can build Yahoo! directly into your own
Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005

Re: Fw: [Bugme-new] [Bug 4496] New: Interrupt-problem depends on sound-playing: irq 10: nobody cared!

[Hannes Diethelm]

Am Dienstag, den 31.05.2005, 09:57 -0600 schrieb Bjorn Helgaas:
> On Monday 30 May 2005 2:48 pm, Hannes Diethelm wrote:
> > Ok, i'm running 2.6.12-rc5-mm1 now. I've tryed your patches but i'm not
> > able to aply those patches...
> 
> At least one of the patches you tried to apply was already
> in 2.6.12-rc5-mm1, so that caused some rejects.
> 
> Can you start again with 2.6.12-rc5-mm1, and apply the following
> patch?
> 
> Thanks for your helpful testing reports.  I really appreciate the
> work you're doing.
> 
> Bjorn
> 
It was my fault with the patches: There where unexcepted whitspaces.
With -l  or  --ignore-whitespace it was no problem.

I've patched the mm1-kernel with the patch below only.
The Problem now is anymore a little diferent. I can play sound whit 
cat soundfile > /dev/dsp. But after a few seconds there is this message
in dmesg:

irq 20: nobody cared (try booting with the "irqpoll" option.
 [<c014117a>] __report_bad_irq+0x2a/0xa0
 [<c01409a0>] handle_IRQ_event+0x30/0x70
 [<c0141290>] note_interrupt+0x80/0xf0
 [<c0140b1c>] __do_IRQ+0x13c/0x140
 [<c0105969>] do_IRQ+0x19/0x30
 [<c0103b62>] common_interrupt+0x1a/0x20
 [<c0100d70>] default_idle+0x0/0x30
 [<c0100d93>] default_idle+0x23/0x30
 [<c0100e60>] cpu_idle+0x80/0x90
 [<c05189dd>] start_kernel+0x18d/0x1d0
 [<c05183c0>] unknown_bootoption+0x0/0x1e0
handlers:
[<e0c56e20>] (radeon_driver_irq_handler+0x0/0xc0 [radeon])
Disabling IRQ #20

When i start Sound whith xmms (alsa) i can hear sound. But when i stop
xmms, there apears a new message in dmesg:

Unable to handle kernel paging request at virtual address b588e060
 printing eip:
c03354d7
*pde = 0b06a067
*pte = 00000000
Oops: 0000 [#1]
PREEMPT SMP
Modules linked in: radeon drm
CPU:    0
EIP:    0060:[<c03354d7>]    Not tainted VLI
EFLAGS: 00210282   (2.6.12-rc5-mm1)
EIP is at snd_pcm_mmap_data_close+0x7/0x12
eax: b588e000   ebx: c03354d0   ecx: cd879e00   edx: cc2d9250
esi: df452ce8   edi: cd879e00   ebp: cd4d7908   esp: cb06ff40
ds: 007b   es: 007b   ss: 0068
Process xmms (pid: 4784, threadinfo=cb06e000 task=cb61c030)
Stack: c01542b6 cd4d7908 cd4d7930 df452cbc 00000000 ded76040 cd4d7908
ded76040
       c0155c2f cd4d7908 cd4d7908 b588e000 b587e000 c015604b ded76040
cd4d7908
       cd4d71d0 b587e000 b588e000 cd4d71d0 ded76040 ded76070 00000002
cb06e000
Call Trace:
 [<c01542b6>] remove_vm_struct+0x96/0xa0
 [<c0155c2f>] unmap_vma_list+0x1f/0x30
 [<c015604b>] do_munmap+0x11b/0x150
 [<c01560c5>] sys_munmap+0x45/0x70
 [<c01031a5>] syscall_call+0x7/0xb
Code: 00 00 00 00 8b 44 24 04 8b 40 50 8b 40 60 f0 ff 80 a4 00 00 00 c3
8d b4 26  00 00 00 00 8d bc 27 00 00 00 00 8b 44 24 04 8b 40 50 <8b> 40
60 f0 ff 88 a4 00  00 00 c3 51 52 e8 37 b8 0b 00 5a 59 e9

Then xmms freazes and i wasn't able to reboot or to kill xmms.

Should i try the other patches?

Hannes

> 
> --- 2.6.12-rc5-mm1/drivers/pci/quirks.c.orig	2005-05-31 09:42:17.000000000 -0600
> +++ 2.6.12-rc5-mm1/drivers/pci/quirks.c	2005-05-31 09:44:07.000000000 -0600
> @@ -499,28 +499,20 @@
>  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C586_3,	quirk_via_acpi );
>  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C686_4,	quirk_via_acpi );
>  
> -static void __devinit quirk_via_irqpic(struct pci_dev *dev)
> +static void quirk_via_irq(struct pci_dev *dev)
>  {
>  	u8 irq, new_irq;
>  
> -#ifdef CONFIG_X86_IO_APIC
> -	if (nr_ioapics && !skip_ioapic_setup)
> -		return;
> -#endif
> -#ifdef CONFIG_ACPI
> -	if (acpi_irq_model != ACPI_IRQ_MODEL_PIC)
> -		return;
> -#endif
>  	new_irq = dev->irq & 0xf;
>  	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
>  	if (new_irq != irq) {
> -		printk(KERN_INFO "PCI: Via PIC IRQ fixup for %s, from %d to %d\n",
> +		printk(KERN_INFO "PCI: Via IRQ fixup for %s, from %d to %d\n",
>  			pci_name(dev), irq, new_irq);
>  		udelay(15);	/* unknown if delay really needed */
>  		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
>  	}
>  }
> -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irqpic);
> +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
>  
>  /*
>   * PIIX3 USB: We have to disable USB interrupts that are
> 



-------------------------------------------------------
This SF.Net email is sponsored by Yahoo.
Introducing Yahoo! Search Developer Network - Create apps using Yahoo!
Search APIs Find out how you can build Yahoo! directly into your own
Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005

Re: Fw: [Bugme-new] [Bug 4496] New: Interrupt-problem depends on sound-playing: irq 10: nobody cared!

[Bjorn Helgaas]

On Tuesday 31 May 2005 12:39 pm, Hannes Diethelm wrote:
> I've patched the mm1-kernel with the patch below only.
> The Problem now is anymore a little diferent. I can play sound whit 
> cat soundfile > /dev/dsp. But after a few seconds there is this message
> in dmesg:
> 
> irq 20: nobody cared (try booting with the "irqpoll" option.

Can you please collect the complete dmesg log and contents of
/proc/interrupts?

>  [<c014117a>] __report_bad_irq+0x2a/0xa0
>  [<c01409a0>] handle_IRQ_event+0x30/0x70
>  [<c0141290>] note_interrupt+0x80/0xf0
>  [<c0140b1c>] __do_IRQ+0x13c/0x140
>  [<c0105969>] do_IRQ+0x19/0x30
>  [<c0103b62>] common_interrupt+0x1a/0x20
>  [<c0100d70>] default_idle+0x0/0x30
>  [<c0100d93>] default_idle+0x23/0x30
>  [<c0100e60>] cpu_idle+0x80/0x90
>  [<c05189dd>] start_kernel+0x18d/0x1d0
>  [<c05183c0>] unknown_bootoption+0x0/0x1e0
> handlers:
> [<e0c56e20>] (radeon_driver_irq_handler+0x0/0xc0 [radeon])
> Disabling IRQ #20
> 
> When i start Sound whith xmms (alsa) i can hear sound. But when i stop
> xmms, there apears a new message in dmesg:
> 
> Unable to handle kernel paging request at virtual address b588e060

Hmmm...  I dunno about this one.

>  printing eip:
> c03354d7
> *pde = 0b06a067
> *pte = 00000000
> Oops: 0000 [#1]
> PREEMPT SMP
> Modules linked in: radeon drm
> CPU:    0
> EIP:    0060:[<c03354d7>]    Not tainted VLI
> EFLAGS: 00210282   (2.6.12-rc5-mm1)
> EIP is at snd_pcm_mmap_data_close+0x7/0x12
> eax: b588e000   ebx: c03354d0   ecx: cd879e00   edx: cc2d9250
> esi: df452ce8   edi: cd879e00   ebp: cd4d7908   esp: cb06ff40
> ds: 007b   es: 007b   ss: 0068
> Process xmms (pid: 4784, threadinfo=cb06e000 task=cb61c030)
> Stack: c01542b6 cd4d7908 cd4d7930 df452cbc 00000000 ded76040 cd4d7908
> ded76040
>        c0155c2f cd4d7908 cd4d7908 b588e000 b587e000 c015604b ded76040
> cd4d7908
>        cd4d71d0 b587e000 b588e000 cd4d71d0 ded76040 ded76070 00000002
> cb06e000
> Call Trace:
>  [<c01542b6>] remove_vm_struct+0x96/0xa0
>  [<c0155c2f>] unmap_vma_list+0x1f/0x30
>  [<c015604b>] do_munmap+0x11b/0x150
>  [<c01560c5>] sys_munmap+0x45/0x70
>  [<c01031a5>] syscall_call+0x7/0xb
> Code: 00 00 00 00 8b 44 24 04 8b 40 50 8b 40 60 f0 ff 80 a4 00 00 00 c3
> 8d b4 26  00 00 00 00 8d bc 27 00 00 00 00 8b 44 24 04 8b 40 50 <8b> 40
> 60 f0 ff 88 a4 00  00 00 c3 51 52 e8 37 b8 0b 00 5a 59 e9
> 
> Then xmms freazes and i wasn't able to reboot or to kill xmms.
> 
> Should i try the other patches?
> 
> Hannes
> 
> > 
> > --- 2.6.12-rc5-mm1/drivers/pci/quirks.c.orig	2005-05-31 09:42:17.000000000 -0600
> > +++ 2.6.12-rc5-mm1/drivers/pci/quirks.c	2005-05-31 09:44:07.000000000 -0600
> > @@ -499,28 +499,20 @@
> >  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C586_3,	quirk_via_acpi );
> >  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA,	PCI_DEVICE_ID_VIA_82C686_4,	quirk_via_acpi );
> >  
> > -static void __devinit quirk_via_irqpic(struct pci_dev *dev)
> > +static void quirk_via_irq(struct pci_dev *dev)
> >  {
> >  	u8 irq, new_irq;
> >  
> > -#ifdef CONFIG_X86_IO_APIC
> > -	if (nr_ioapics && !skip_ioapic_setup)
> > -		return;
> > -#endif
> > -#ifdef CONFIG_ACPI
> > -	if (acpi_irq_model != ACPI_IRQ_MODEL_PIC)
> > -		return;
> > -#endif
> >  	new_irq = dev->irq & 0xf;
> >  	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
> >  	if (new_irq != irq) {
> > -		printk(KERN_INFO "PCI: Via PIC IRQ fixup for %s, from %d to %d\n",
> > +		printk(KERN_INFO "PCI: Via IRQ fixup for %s, from %d to %d\n",
> >  			pci_name(dev), irq, new_irq);
> >  		udelay(15);	/* unknown if delay really needed */
> >  		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, new_irq);
> >  	}
> >  }
> > -DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irqpic);
> > +DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_ANY_ID, quirk_via_irq);
> >  
> >  /*
> >   * PIIX3 USB: We have to disable USB interrupts that are
> > 
> 
> 


-------------------------------------------------------
This SF.Net email is sponsored by Yahoo.
Introducing Yahoo! Search Developer Network - Create apps using Yahoo!
Search APIs Find out how you can build Yahoo! directly into your own
Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005

Re: Fw: [Bugme-new] [Bug 4496] New: Interrupt-problem depends on sound-playing: irq 10: nobody cared!

[Hannes Diethelm]

[-- Attachment #1: Type: text/plain, Size: 171 bytes --]

Am Dienstag, den 31.05.2005, 12:49 -0600 schrieb Bjorn Helgaas:

> Can you please collect the complete dmesg log and contents of
> /proc/interrupts?

Something to read ;)

[-- Attachment #2: dmesg_after_sound.txt --]
[-- Type: text/plain, Size: 15015 bytes --]

Linux version 2.6.12-rc5-mm1 (hannes@linux-server) (gcc-Version 3.3.5 (Debian 1:3.3.5-12)) #2 SMP Tue May 31 19:57:32 CEST 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
511MB LOWMEM available.
found SMP MP-table at 000f5290
On node 0 totalpages: 131056
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126960 pages, LIFO batch:31
  HighMem zone: 0 pages, LIFO batch:1
DMI not present.
ACPI: RSDP (v000 VIA694                                ) @ 0x000f6590
ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: MADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff57c0
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:8 APIC version 17
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:8 APIC version 17
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
Built 1 zonelists
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
Kernel command line: root=/dev/hda1 ro vga=791
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 868.755 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 514100k/524224k available (3016k kernel code, 9636k reserved, 1162k data, 240k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1740.70 BogoMIPS (lpj=3481416)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel Pentium III (Coppermine) stepping 0a
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 1737.41 BogoMIPS (lpj=3474821)
CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Pentium III (Coppermine) stepping 0a
Total of 2 processors activated (3478.11 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Subsystem revision 20050408
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
audit: initializing netlink socket (disabled)
audit(1117565920.316:1): initialized
inotify device minor=63
Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org).
NTFS driver 2.1.23-WIP [Flags: R/O].
PCI: Enabling Via external APIC routing
vesafb: framebuffer at 0xd9000000, mapped to 0xe0880000, using 3072k, total 4096k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c7d6:0000
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
lp: driver loaded but no devices found
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA Apollo Pro 133 chipset
agpgart: AGP aperture is 64M @ 0xd0000000
cn_fork is registered
PNP: PS/2 controller doesn't have AUX irq; using default 0xc
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
lp0: using parport0 (interrupt-driven).
parport_pc: VIA parallel port: io=0x378, irq=7
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw-5bpFXmC1L3aJ4eUNlOKu3Q@public.gmane.org> and others
ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 16
eth0: 0000:00:0f.0, 00:08:9B:09:A9:4B, IRQ 16.
  Board assembly 729757-006, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 17
eth1: 0000:00:10.0, 00:08:9B:09:A9:4C, IRQ 17.
  Board assembly 729757-006, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
    ide0: BM-DMA at 0xcc00-0xcc07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: Maxtor 6B160P0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: PLEXTOR DVDR PX-716A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 1024KiB
hda: 320173056 sectors (163928 MB) w/8192KiB Cache, CHS=19929/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
ide-disk: probe of 1.0 failed with error 1
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
usbmon: debugs is not available
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 16
ohci_hcd 0000:00:13.0: OPTi Inc. 82C861
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: irq 16, io mem 0xd9a02000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 18
PCI: Via IRQ fixup for 0000:00:07.2, from 12 to 2
uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:07.2: irq 18, io base 0x0000b000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 18
PCI: Via IRQ fixup for 0000:00:07.3, from 12 to 2
uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:07.3: irq 18, io base 0x0000b400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-1: new low speed USB device using ohci_hcd and address 2
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
Advanced Linux Sound Architecture Driver Version 1.0.9rc3  (Thu Mar 24 10:33:39 2005 UTC).
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 19
PCI: Via IRQ fixup for 0000:00:07.5, from 11 to 3
PCI: Setting latency timer of device 0000:00:07.5 to 64
input: AT Translated Set 2 keyboard on isa0060/serio0
ALSA device list:
  #0: VIA 82C686A/B rev50 with ALC200,200P at 0xb800, irq 19
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 32Kbytes
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 6, 393216 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 212 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.2: Stephen Frost <sfrost-vhD3WmCyG/PR7s880joybQ@public.gmane.org>.  http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 5
Starting balanced_irq
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
kjournald starting.  Commit interval 5 seconds
Freeing unused kernel memory: 240k freed
Adding 1510068k swap on /dev/hda7.  Priority:-1 extents:1
EXT3 FS on hda1, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 19 (level, low) -> IRQ 20
[drm] Initialized radeon 1.16.0 20050311 on minor 0: ATI Technologies Inc RV280 [Radeon 9200 PRO]
[drm] Loading R200 Microcode
irq 20: nobody cared (try booting with the "irqpoll" option.
 [<c014117a>] __report_bad_irq+0x2a/0xa0
 [<c01409a0>] handle_IRQ_event+0x30/0x70
 [<c0141290>] note_interrupt+0x80/0xf0
 [<c0140b1c>] __do_IRQ+0x13c/0x140
 [<c0105969>] do_IRQ+0x19/0x30
 [<c0103b62>] common_interrupt+0x1a/0x20
 [<c0100d70>] default_idle+0x0/0x30
 [<c0100d93>] default_idle+0x23/0x30
 [<c0100e60>] cpu_idle+0x80/0x90
 [<c05189dd>] start_kernel+0x18d/0x1d0
 [<c05183c0>] unknown_bootoption+0x0/0x1e0
handlers:
[<e0c56e20>] (radeon_driver_irq_handler+0x0/0xc0 [radeon])
Disabling IRQ #20
Unable to handle kernel paging request at virtual address b587f060
 printing eip:
c03354d7
*pde = 0c167067
*pte = 00000000
Oops: 0000 [#1]
PREEMPT SMP 
Modules linked in: radeon drm
CPU:    0
EIP:    0060:[<c03354d7>]    Not tainted VLI
EFLAGS: 00210282   (2.6.12-rc5-mm1) 
EIP is at snd_pcm_mmap_data_close+0x7/0x12
eax: b587f000   ebx: c03354d0   ecx: ddb03a20   edx: cc4897d0
esi: dfb59ec4   edi: ddb03a20   ebp: cc489750   esp: cc1d3f40
ds: 007b   es: 007b   ss: 0068
Process xmms (pid: 4650, threadinfo=cc1d2000 task=d518da30)
Stack: c01542b6 cc489750 cc489778 dfb59e98 00000000 d878bcc0 cc489750 d878bcc0 
       c0155c2f cc489750 cc489750 b587f000 b586f000 c015604b d878bcc0 cc489750 
       cc4896f8 b586f000 b587f000 cc4896f8 d878bcc0 d878bcf0 00000002 cc1d2000 
Call Trace:
 [<c01542b6>] remove_vm_struct+0x96/0xa0
 [<c0155c2f>] unmap_vma_list+0x1f/0x30
 [<c015604b>] do_munmap+0x11b/0x150
 [<c01560c5>] sys_munmap+0x45/0x70
 [<c01031a5>] syscall_call+0x7/0xb
Code: 00 00 00 00 8b 44 24 04 8b 40 50 8b 40 60 f0 ff 80 a4 00 00 00 c3 8d b4 26 00 00 00 00 8d bc 27 00 00 00 00 8b 44 24 04 8b 40 50 <8b> 40 60 f0 ff 88 a4 00 00 00 c3 51 52 e8 37 b8 0b 00 5a 59 e9 
 

[-- Attachment #3: dmesg_before_sound.txt --]
[-- Type: text/plain, Size: 13278 bytes --]

Linux version 2.6.12-rc5-mm1 (hannes@linux-server) (gcc-Version 3.3.5 (Debian 1:3.3.5-12)) #2 SMP Tue May 31 19:57:32 CEST 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
511MB LOWMEM available.
found SMP MP-table at 000f5290
On node 0 totalpages: 131056
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126960 pages, LIFO batch:31
  HighMem zone: 0 pages, LIFO batch:1
DMI not present.
ACPI: RSDP (v000 VIA694                                ) @ 0x000f6590
ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: MADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff57c0
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:8 APIC version 17
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:8 APIC version 17
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
Built 1 zonelists
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
Kernel command line: root=/dev/hda1 ro vga=791
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 868.755 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 514100k/524224k available (3016k kernel code, 9636k reserved, 1162k data, 240k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1740.70 BogoMIPS (lpj=3481416)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel Pentium III (Coppermine) stepping 0a
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 1737.41 BogoMIPS (lpj=3474821)
CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Pentium III (Coppermine) stepping 0a
Total of 2 processors activated (3478.11 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Subsystem revision 20050408
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
audit: initializing netlink socket (disabled)
audit(1117565920.316:1): initialized
inotify device minor=63
Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org).
NTFS driver 2.1.23-WIP [Flags: R/O].
PCI: Enabling Via external APIC routing
vesafb: framebuffer at 0xd9000000, mapped to 0xe0880000, using 3072k, total 4096k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c7d6:0000
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
lp: driver loaded but no devices found
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA Apollo Pro 133 chipset
agpgart: AGP aperture is 64M @ 0xd0000000
cn_fork is registered
PNP: PS/2 controller doesn't have AUX irq; using default 0xc
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
lp0: using parport0 (interrupt-driven).
parport_pc: VIA parallel port: io=0x378, irq=7
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw-5bpFXmC1L3aJ4eUNlOKu3Q@public.gmane.org> and others
ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 16
eth0: 0000:00:0f.0, 00:08:9B:09:A9:4B, IRQ 16.
  Board assembly 729757-006, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 17
eth1: 0000:00:10.0, 00:08:9B:09:A9:4C, IRQ 17.
  Board assembly 729757-006, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
    ide0: BM-DMA at 0xcc00-0xcc07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: Maxtor 6B160P0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: PLEXTOR DVDR PX-716A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 1024KiB
hda: 320173056 sectors (163928 MB) w/8192KiB Cache, CHS=19929/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
ide-disk: probe of 1.0 failed with error 1
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
usbmon: debugs is not available
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 16
ohci_hcd 0000:00:13.0: OPTi Inc. 82C861
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: irq 16, io mem 0xd9a02000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 18
PCI: Via IRQ fixup for 0000:00:07.2, from 12 to 2
uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:07.2: irq 18, io base 0x0000b000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 18
PCI: Via IRQ fixup for 0000:00:07.3, from 12 to 2
uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:07.3: irq 18, io base 0x0000b400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-1: new low speed USB device using ohci_hcd and address 2
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
Advanced Linux Sound Architecture Driver Version 1.0.9rc3  (Thu Mar 24 10:33:39 2005 UTC).
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 19
PCI: Via IRQ fixup for 0000:00:07.5, from 11 to 3
PCI: Setting latency timer of device 0000:00:07.5 to 64
input: AT Translated Set 2 keyboard on isa0060/serio0
ALSA device list:
  #0: VIA 82C686A/B rev50 with ALC200,200P at 0xb800, irq 19
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 32Kbytes
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 6, 393216 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 212 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.2: Stephen Frost <sfrost-vhD3WmCyG/PR7s880joybQ@public.gmane.org>.  http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 5
Starting balanced_irq
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
kjournald starting.  Commit interval 5 seconds
Freeing unused kernel memory: 240k freed
Adding 1510068k swap on /dev/hda7.  Priority:-1 extents:1
EXT3 FS on hda1, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 19 (level, low) -> IRQ 20
[drm] Initialized radeon 1.16.0 20050311 on minor 0: ATI Technologies Inc RV280 [Radeon 9200 PRO]
[drm] Loading R200 Microcode

[-- Attachment #4: interrupts_after_sound.txt --]
[-- Type: text/plain, Size: 672 bytes --]

           CPU0       CPU1       
  0:      33929      28893    IO-APIC-edge  timer
  1:        383        232    IO-APIC-edge  i8042
  7:          0          0    IO-APIC-edge  parport0
  9:          0          0   IO-APIC-level  acpi
 14:       5687       3339    IO-APIC-edge  ide0
 15:       1012       1065    IO-APIC-edge  ide1
 16:      12155         13   IO-APIC-level  ohci_hcd:usb1, eth0
 18:       1650        916   IO-APIC-level  uhci_hcd:usb2, uhci_hcd:usb3
 19:      11948       9029   IO-APIC-level  VIA686A
 20:     199254        746   IO-APIC-level  radeon@PCI:2:7:0
NMI:          0          0 
LOC:      62702      62701 
ERR:          0
MIS:          0

[-- Attachment #5: lspci.txt --]
[-- Type: text/plain, Size: 4969 bytes --]

0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4)
	Flags: bus master, medium devsel, latency 8
	Memory at d0000000 (32-bit, prefetchable) [size=64M]
	Capabilities: <available only to root>

0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] (prog-if 00 [Normal decode])
	Flags: bus master, 66MHz, medium devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00009000-00009fff
	Memory behind bridge: d7000000-d8ffffff
	Prefetchable memory behind bridge: d9000000-d97fffff
	Capabilities: <available only to root>

0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
	Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge
	Flags: bus master, stepping, medium devsel, latency 0
	Capabilities: <available only to root>

0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
	Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE
	Flags: bus master, medium devsel, latency 32
	I/O ports at cc00 [size=16]
	Capabilities: <available only to root>

0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1a) (prog-if 00 [UHCI])
	Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
	Flags: bus master, medium devsel, latency 32, IRQ 18
	I/O ports at b000 [size=32]
	Capabilities: <available only to root>

0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1a) (prog-if 00 [UHCI])
	Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
	Flags: bus master, medium devsel, latency 32, IRQ 18
	I/O ports at b400 [size=32]
	Capabilities: <available only to root>

0000:00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
	Subsystem: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI]
	Flags: medium devsel, IRQ 9
	Capabilities: <available only to root>

0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50)
	Subsystem: VIA Technologies, Inc. VT82C686 AC97 Audio Controller
	Flags: medium devsel, IRQ 19
	I/O ports at b800 [size=256]
	I/O ports at bc00 [size=4]
	I/O ports at c000 [size=4]
	Capabilities: <available only to root>

0000:00:0f.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
	Subsystem: Intel Corp. EtherExpress PRO/100+ Server Adapter (PILA8470B)
	Flags: bus master, medium devsel, latency 32, IRQ 16
	Memory at d9a01000 (32-bit, non-prefetchable) [size=4K]
	I/O ports at c400 [size=64]
	Memory at d9800000 (32-bit, non-prefetchable) [size=1M]
	Capabilities: <available only to root>

0000:00:10.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08)
	Subsystem: Intel Corp. EtherExpress PRO/100+ Server Adapter (PILA8470B)
	Flags: bus master, medium devsel, latency 32, IRQ 17
	Memory at d9a00000 (32-bit, non-prefetchable) [size=4K]
	I/O ports at c800 [size=64]
	Memory at d9900000 (32-bit, non-prefetchable) [size=1M]
	Capabilities: <available only to root>

0000:00:11.0 PCI bridge: Texas Instruments PCI2031 (rev 01) (prog-if 00 [Normal decode])
	Flags: bus master, medium devsel, latency 32
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
	I/O behind bridge: 0000a000-0000afff
	Memory behind bridge: d5000000-d6ffffff
	Prefetchable memory behind bridge: c0000000-cfffffff
	Capabilities: <available only to root>

0000:00:13.0 USB Controller: OPTi Inc. 82C861 (rev 10) (prog-if 10 [OHCI])
	Subsystem: OPTi Inc. 82C861
	Flags: bus master, medium devsel, latency 32, IRQ 16
	Memory at d9a02000 (32-bit, non-prefetchable) [size=4K]

0000:01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 86C326 5598/6326 (rev 0b) (prog-if 00 [VGA])
	Subsystem: Yuan Yuan Enterprise Co., Ltd.: Unknown device 6326
	Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 255
	Memory at d9000000 (32-bit, prefetchable) [size=8M]
	Memory at d8000000 (32-bit, non-prefetchable) [size=64K]
	I/O ports at 9000 [size=128]
	Capabilities: <available only to root>

0000:02:07.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01) (prog-if 00 [VGA])
	Subsystem: Hightech Information System Ltd.: Unknown device 2020
	Flags: bus master, medium devsel, latency 32, IRQ 20
	Memory at c0000000 (32-bit, prefetchable) [size=128M]
	I/O ports at a000 [disabled] [size=256]
	Memory at d6000000 (32-bit, non-prefetchable) [size=64K]
	Capabilities: <available only to root>

0000:02:07.1 Display controller: ATI Technologies Inc: Unknown device 5940 (rev 01)
	Subsystem: Hightech Information System Ltd.: Unknown device 2021
	Flags: bus master, medium devsel, latency 32
	Memory at c8000000 (32-bit, prefetchable) [size=128M]
	Memory at d6010000 (32-bit, non-prefetchable) [size=64K]
	Capabilities: <available only to root>


[-- Attachment #6: syslog --]
[-- Type: text/plain, Size: 34647 bytes --]

May 31 20:58:58 localhost syslogd 1.4.1#16: restart.
May 31 20:58:58 localhost udev[3315]: removing device node '/dev/vcsa1'
May 31 20:58:58 localhost udev[3320]: creating device node '/dev/vcs1'
May 31 20:58:58 localhost udev[3328]: creating device node '/dev/vcsa1'
May 31 20:58:58 localhost kernel: klogd 1.4.1#16, log source = /proc/kmsg started.
May 31 20:58:58 localhost kernel: Cannot find map file.
May 31 20:58:58 localhost kernel: No module symbols loaded - kernel modules not enabled. 
May 31 20:58:58 localhost kernel: Linux version 2.6.12-rc5-mm1 (hannes@linux-server) (gcc-Version 3.3.5 (Debian 1:3.3.5-12)) #2 SMP Tue May 31 19:57:32 CEST 2005
May 31 20:58:58 localhost kernel: BIOS-provided physical RAM map:
May 31 20:58:58 localhost kernel:  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
May 31 20:58:58 localhost kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
May 31 20:58:58 localhost kernel:  BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
May 31 20:58:58 localhost kernel:  BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
May 31 20:58:58 localhost kernel:  BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
May 31 20:58:58 localhost kernel:  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
May 31 20:58:58 localhost kernel: 511MB LOWMEM available.
May 31 20:58:58 localhost kernel: found SMP MP-table at 000f5290
May 31 20:58:58 localhost kernel: On node 0 totalpages: 131056
May 31 20:58:58 localhost kernel:   DMA zone: 4096 pages, LIFO batch:1
May 31 20:58:58 localhost kernel:   Normal zone: 126960 pages, LIFO batch:31
May 31 20:58:58 localhost kernel:   HighMem zone: 0 pages, LIFO batch:1
May 31 20:58:58 localhost kernel: DMI not present.
May 31 20:58:58 localhost kernel: ACPI: RSDP (v000 VIA694                                ) @ 0x000f6590
May 31 20:58:58 localhost kernel: ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
May 31 20:58:58 localhost kernel: ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
May 31 20:58:58 localhost kernel: ACPI: MADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff57c0
May 31 20:58:58 localhost kernel: ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
May 31 20:58:58 localhost kernel: ACPI: Local APIC address 0xfee00000
May 31 20:58:58 localhost kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
May 31 20:58:58 localhost kernel: Processor #0 6:8 APIC version 17
May 31 20:58:58 localhost kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
May 31 20:58:58 localhost kernel: Processor #1 6:8 APIC version 17
May 31 20:58:58 localhost kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
May 31 20:58:58 localhost kernel: IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
May 31 20:58:58 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
May 31 20:58:58 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
May 31 20:58:58 localhost kernel: ACPI: IRQ0 used by override.
May 31 20:58:58 localhost kernel: ACPI: IRQ2 used by override.
May 31 20:58:58 localhost kernel: ACPI: IRQ9 used by override.
May 31 20:58:58 localhost kernel: Enabling APIC mode:  Flat.  Using 1 I/O APICs
May 31 20:58:58 localhost kernel: Using ACPI (MADT) for SMP configuration information
May 31 20:58:58 localhost kernel: Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
May 31 20:58:58 localhost kernel: Built 1 zonelists
May 31 20:58:58 localhost kernel: mapped APIC to ffffd000 (fee00000)
May 31 20:58:58 localhost kernel: mapped IOAPIC to ffffc000 (fec00000)
May 31 20:58:58 localhost kernel: Initializing CPU#0
May 31 20:58:58 localhost kernel: Kernel command line: root=/dev/hda1 ro vga=791
May 31 20:58:58 localhost kernel: PID hash table entries: 2048 (order: 11, 32768 bytes)
May 31 20:58:58 localhost kernel: Detected 868.755 MHz processor.
May 31 20:58:58 localhost kernel: Using tsc for high-res timesource
May 31 20:58:58 localhost kernel: Console: colour dummy device 80x25
May 31 20:58:58 localhost kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
May 31 20:58:58 localhost kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
May 31 20:58:58 localhost kernel: Memory: 514100k/524224k available (3016k kernel code, 9636k reserved, 1162k data, 240k init, 0k highmem)
May 31 20:58:58 localhost kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
May 31 20:58:58 localhost kernel: Calibrating delay using timer specific routine.. 1740.70 BogoMIPS (lpj=3481416)
May 31 20:58:58 localhost kernel: Mount-cache hash table entries: 512
May 31 20:58:58 localhost kernel: CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
May 31 20:58:58 localhost kernel: CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
May 31 20:58:58 localhost kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
May 31 20:58:58 localhost kernel: CPU: L2 cache: 256K
May 31 20:58:58 localhost kernel: CPU serial number disabled.
May 31 20:58:58 localhost kernel: CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
May 31 20:58:58 localhost kernel: Intel machine check architecture supported.
May 31 20:58:58 localhost kernel: Intel machine check reporting enabled on CPU#0.
May 31 20:58:58 localhost kernel: Enabling fast FPU save and restore... done.
May 31 20:58:58 localhost kernel: Enabling unmasked SIMD FPU exception support... done.
May 31 20:58:58 localhost kernel: Checking 'hlt' instruction... OK.
May 31 20:58:58 localhost kernel: CPU0: Intel Pentium III (Coppermine) stepping 0a
May 31 20:58:58 localhost kernel: Booting processor 1/1 eip 2000
May 31 20:58:58 localhost kernel: Initializing CPU#1
May 31 20:58:58 localhost kernel: Calibrating delay using timer specific routine.. 1737.41 BogoMIPS (lpj=3474821)
May 31 20:58:58 localhost kernel: CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
May 31 20:58:58 localhost kernel: CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
May 31 20:58:58 localhost kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
May 31 20:58:58 localhost kernel: CPU: L2 cache: 256K
May 31 20:58:58 localhost kernel: CPU serial number disabled.
May 31 20:58:58 localhost kernel: CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
May 31 20:58:58 localhost kernel: Intel machine check architecture supported.
May 31 20:58:58 localhost kernel: Intel machine check reporting enabled on CPU#1.
May 31 20:58:58 localhost kernel: CPU1: Intel Pentium III (Coppermine) stepping 0a
May 31 20:58:58 localhost kernel: Total of 2 processors activated (3478.11 BogoMIPS).
May 31 20:58:58 localhost kernel: ENABLING IO-APIC IRQs
May 31 20:58:58 localhost kernel: ..TIMER: vector=0x31 pin1=2 pin2=-1
May 31 20:58:58 localhost kernel: checking TSC synchronization across 2 CPUs: passed.
May 31 20:58:58 localhost kernel: Brought up 2 CPUs
May 31 20:58:58 localhost kernel: NET: Registered protocol family 16
May 31 20:58:58 localhost kernel: ACPI: bus type pci registered
May 31 20:58:58 localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=2
May 31 20:58:58 localhost kernel: PCI: Using configuration type 1
May 31 20:58:58 localhost kernel: mtrr: v2.0 (20020519)
May 31 20:58:58 localhost kernel: mtrr: your CPUs had inconsistent variable MTRR settings
May 31 20:58:58 localhost kernel: mtrr: probably your BIOS does not setup all CPUs.
May 31 20:58:58 localhost kernel: mtrr: corrected configuration.
May 31 20:58:58 localhost kernel: ACPI: Subsystem revision 20050408
May 31 20:58:58 localhost kernel: ACPI: Interpreter enabled
May 31 20:58:58 localhost kernel: ACPI: Using IOAPIC for interrupt routing
May 31 20:58:58 localhost kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
May 31 20:58:58 localhost kernel: PCI: Probing PCI hardware (bus 00)
May 31 20:58:58 localhost kernel: ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
May 31 20:58:58 localhost kernel: ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
May 31 20:58:58 localhost kernel: Boot video device is 0000:01:00.0
May 31 20:58:58 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
May 31 20:58:58 localhost kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
May 31 20:58:58 localhost kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
May 31 20:58:58 localhost kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
May 31 20:58:58 localhost kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
May 31 20:58:58 localhost kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
May 31 20:58:58 localhost kernel: pnp: PnP ACPI init
May 31 20:58:58 localhost kernel: pnp: PnP ACPI: found 11 devices
May 31 20:58:58 localhost kernel: PnPBIOS: Disabled by ACPI PNP
May 31 20:58:58 localhost kernel: SCSI subsystem initialized
May 31 20:58:58 localhost kernel: usbcore: registered new driver usbfs
May 31 20:58:58 localhost kernel: usbcore: registered new driver hub
May 31 20:58:58 localhost kernel: PCI: Using ACPI for IRQ routing
May 31 20:58:58 localhost kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
May 31 20:58:58 localhost kernel: audit: initializing netlink socket (disabled)
May 31 20:58:58 localhost kernel: audit(1117565920.316:1): initialized
May 31 20:58:58 localhost kernel: inotify device minor=63
May 31 20:58:58 localhost kernel: Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org).
May 31 20:58:58 localhost kernel: NTFS driver 2.1.23-WIP [Flags: R/O].
May 31 20:58:58 localhost kernel: PCI: Enabling Via external APIC routing
May 31 20:58:58 localhost kernel: vesafb: framebuffer at 0xd9000000, mapped to 0xe0880000, using 3072k, total 4096k
May 31 20:58:58 localhost kernel: vesafb: mode is 1024x768x16, linelength=2048, pages=1
May 31 20:58:58 localhost kernel: vesafb: protected mode interface info at c7d6:0000
May 31 20:58:58 localhost kernel: vesafb: scrolling: redraw
May 31 20:58:58 localhost kernel: vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
May 31 20:58:58 localhost kernel: Console: switching to colour frame buffer device 128x48
May 31 20:58:58 localhost kernel: fb0: VESA VGA frame buffer device
May 31 20:58:58 localhost kernel: isapnp: Scanning for PnP cards...
May 31 20:58:58 localhost kernel: isapnp: No Plug & Play device found
May 31 20:58:58 localhost kernel: lp: driver loaded but no devices found
May 31 20:58:58 localhost kernel: Linux agpgart interface v0.101 (c) Dave Jones
May 31 20:58:58 localhost kernel: agpgart: Detected VIA Apollo Pro 133 chipset
May 31 20:58:58 localhost kernel: agpgart: AGP aperture is 64M @ 0xd0000000
May 31 20:58:58 localhost kernel: cn_fork is registered
May 31 20:58:58 localhost kernel: PNP: PS/2 controller doesn't have AUX irq; using default 0xc
May 31 20:58:58 localhost kernel: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1,12
May 31 20:58:58 localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
May 31 20:58:58 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
May 31 20:58:58 localhost kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
May 31 20:58:58 localhost kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
May 31 20:58:58 localhost kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
May 31 20:58:58 localhost kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
May 31 20:58:58 localhost kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
May 31 20:58:58 localhost kernel: parport_pc: VIA 686A/8231 detected
May 31 20:58:58 localhost kernel: parport_pc: probing current configuration
May 31 20:58:58 localhost kernel: parport_pc: Current parallel port base: 0x378
May 31 20:58:58 localhost kernel: parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
May 31 20:58:58 localhost kernel: lp0: using parport0 (interrupt-driven).
May 31 20:58:58 localhost kernel: parport_pc: VIA parallel port: io=0x378, irq=7
May 31 20:58:58 localhost kernel: io scheduler noop registered
May 31 20:58:58 localhost kernel: io scheduler anticipatory registered
May 31 20:58:58 localhost kernel: io scheduler deadline registered
May 31 20:58:58 localhost kernel: io scheduler cfq registered
May 31 20:58:58 localhost kernel: Floppy drive(s): fd0 is 1.44M
May 31 20:58:58 localhost kernel: FDC 0 is a post-1991 82077
May 31 20:58:58 localhost kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
May 31 20:58:58 localhost kernel: loop: loaded (max 8 devices)
May 31 20:58:58 localhost kernel: eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
May 31 20:58:58 localhost kernel: eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw-5bpFXmC1L3aJ4eUNlOKu3Q@public.gmane.org> and others
May 31 20:58:58 localhost kernel: ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 16
May 31 20:58:58 localhost kernel: eth0: 0000:00:0f.0, 00:08:9B:09:A9:4B, IRQ 16.
May 31 20:58:58 localhost kernel:   Board assembly 729757-006, Physical connectors present: RJ45
May 31 20:58:58 localhost kernel:   Primary interface chip i82555 PHY #1.
May 31 20:58:58 localhost kernel:   General self-test: passed.
May 31 20:58:58 localhost kernel:   Serial sub-system self-test: passed.
May 31 20:58:58 localhost kernel:   Internal registers self-test: passed.
May 31 20:58:58 localhost kernel:   ROM checksum self-test: passed (0x04f4518b).
May 31 20:58:58 localhost kernel: ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 17
May 31 20:58:58 localhost kernel: eth1: 0000:00:10.0, 00:08:9B:09:A9:4C, IRQ 17.
May 31 20:58:58 localhost kernel:   Board assembly 729757-006, Physical connectors present: RJ45
May 31 20:58:58 localhost kernel:   Primary interface chip i82555 PHY #1.
May 31 20:58:58 localhost kernel:   General self-test: passed.
May 31 20:58:58 localhost kernel:   Serial sub-system self-test: passed.
May 31 20:58:58 localhost kernel:   Internal registers self-test: passed.
May 31 20:58:58 localhost kernel:   ROM checksum self-test: passed (0x04f4518b).
May 31 20:58:58 localhost kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
May 31 20:58:58 localhost kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
May 31 20:58:58 localhost kernel: VP_IDE: IDE controller at PCI slot 0000:00:07.1
May 31 20:58:58 localhost kernel: PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
May 31 20:58:58 localhost kernel: VP_IDE: chipset revision 6
May 31 20:58:58 localhost kernel: VP_IDE: not 100%% native mode: will probe irqs later
May 31 20:58:58 localhost kernel: VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
May 31 20:58:58 localhost kernel:     ide0: BM-DMA at 0xcc00-0xcc07, BIOS settings: hda:DMA, hdb:pio
May 31 20:58:58 localhost kernel:     ide1: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdc:DMA, hdd:pio
May 31 20:58:58 localhost kernel: Probing IDE interface ide0...
May 31 20:58:58 localhost kernel: hda: Maxtor 6B160P0, ATA DISK drive
May 31 20:58:58 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
May 31 20:58:58 localhost kernel: Probing IDE interface ide1...
May 31 20:58:58 localhost kernel: hdc: PLEXTOR DVDR PX-716A, ATAPI CD/DVD-ROM drive
May 31 20:58:58 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15
May 31 20:58:58 localhost kernel: Probing IDE interface ide2...
May 31 20:58:58 localhost kernel: Probing IDE interface ide3...
May 31 20:58:58 localhost kernel: Probing IDE interface ide4...
May 31 20:58:58 localhost kernel: Probing IDE interface ide5...
May 31 20:58:58 localhost kernel: hda: max request size: 1024KiB
May 31 20:58:58 localhost kernel: hda: 320173056 sectors (163928 MB) w/8192KiB Cache, CHS=19929/255/63, UDMA(100)
May 31 20:58:58 localhost kernel: hda: cache flushes supported
May 31 20:58:58 localhost kernel:  hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
May 31 20:58:58 localhost kernel: ide-disk: probe of 1.0 failed with error 1
May 31 20:58:58 localhost kernel: hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(66)
May 31 20:58:58 localhost kernel: Uniform CD-ROM driver Revision: 3.20
May 31 20:58:58 localhost kernel: usbmon: debugs is not available
May 31 20:58:58 localhost kernel: ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
May 31 20:58:58 localhost kernel: ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 16
May 31 20:58:58 localhost kernel: ohci_hcd 0000:00:13.0: OPTi Inc. 82C861
May 31 20:58:58 localhost kernel: ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
May 31 20:58:58 localhost kernel: ohci_hcd 0000:00:13.0: irq 16, io mem 0xd9a02000
May 31 20:58:58 localhost kernel: hub 1-0:1.0: USB hub found
May 31 20:58:58 localhost kernel: hub 1-0:1.0: 2 ports detected
May 31 20:58:58 localhost kernel: USB Universal Host Controller Interface driver v2.3
May 31 20:58:58 localhost kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
May 31 20:58:58 localhost kernel: ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 18
May 31 20:58:58 localhost kernel: PCI: Via IRQ fixup for 0000:00:07.2, from 12 to 2
May 31 20:58:58 localhost kernel: uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
May 31 20:58:58 localhost kernel: uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 2
May 31 20:58:58 localhost kernel: uhci_hcd 0000:00:07.2: irq 18, io base 0x0000b000
May 31 20:58:58 localhost kernel: hub 2-0:1.0: USB hub found
May 31 20:58:58 localhost kernel: hub 2-0:1.0: 2 ports detected
May 31 20:58:58 localhost kernel: ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 18
May 31 20:58:58 localhost kernel: PCI: Via IRQ fixup for 0000:00:07.3, from 12 to 2
May 31 20:58:58 localhost kernel: uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
May 31 20:58:58 localhost kernel: uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 3
May 31 20:58:58 localhost kernel: uhci_hcd 0000:00:07.3: irq 18, io base 0x0000b400
May 31 20:58:58 localhost kernel: hub 3-0:1.0: USB hub found
May 31 20:58:58 localhost kernel: hub 3-0:1.0: 2 ports detected
May 31 20:58:58 localhost kernel: usb 1-1: new low speed USB device using ohci_hcd and address 2
May 31 20:58:58 localhost kernel: usbcore: registered new driver usblp
May 31 20:58:58 localhost kernel: drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
May 31 20:58:58 localhost kernel: Initializing USB Mass Storage driver...
May 31 20:58:58 localhost kernel: usbcore: registered new driver usb-storage
May 31 20:58:58 localhost kernel: USB Mass Storage support registered.
May 31 20:58:58 localhost kernel: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-1
May 31 20:58:58 localhost kernel: usbcore: registered new driver usbhid
May 31 20:58:58 localhost kernel: drivers/usb/input/hid-core.c: v2.01:USB HID core driver
May 31 20:58:58 localhost kernel: mice: PS/2 mouse device common for all mice
May 31 20:58:58 localhost kernel: Advanced Linux Sound Architecture Driver Version 1.0.9rc3  (Thu Mar 24 10:33:39 2005 UTC).
May 31 20:58:58 localhost kernel: ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
May 31 20:58:58 localhost kernel: ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 19
May 31 20:58:58 localhost kernel: PCI: Via IRQ fixup for 0000:00:07.5, from 11 to 3
May 31 20:58:58 localhost kernel: PCI: Setting latency timer of device 0000:00:07.5 to 64
May 31 20:58:58 localhost kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
May 31 20:58:58 localhost kernel: ALSA device list:
May 31 20:58:58 localhost kernel:   #0: VIA 82C686A/B rev50 with ALC200,200P at 0xb800, irq 19
May 31 20:58:58 localhost kernel: NET: Registered protocol family 2
May 31 20:58:58 localhost kernel: IP: routing cache hash table of 2048 buckets, 32Kbytes
May 31 20:58:58 localhost kernel: TCP established hash table entries: 32768 (order: 7, 524288 bytes)
May 31 20:58:58 localhost kernel: TCP bind hash table entries: 32768 (order: 6, 393216 bytes)
May 31 20:58:58 localhost kernel: TCP: Hash tables configured (established 32768 bind 32768)
May 31 20:58:58 localhost kernel: ip_conntrack version 2.1 (4095 buckets, 32760 max) - 212 bytes per conntrack
May 31 20:58:58 localhost kernel: ip_tables: (C) 2000-2002 Netfilter core team
May 31 20:58:58 localhost kernel: ipt_recent v0.3.2: Stephen Frost <sfrost@snowman.net>.  http://snowman.net/projects/ipt_recent/
May 31 20:58:58 localhost kernel: arp_tables: (C) 2002 David S. Miller
May 31 20:58:58 localhost kernel: NET: Registered protocol family 1
May 31 20:58:58 localhost kernel: NET: Registered protocol family 17
May 31 20:58:58 localhost kernel: NET: Registered protocol family 5
May 31 20:58:58 localhost kernel: Starting balanced_irq
May 31 20:58:58 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
May 31 20:58:58 localhost kernel: VFS: Mounted root (ext3 filesystem) readonly.
May 31 20:58:58 localhost kernel: kjournald starting.  Commit interval 5 seconds
May 31 20:58:58 localhost kernel: Freeing unused kernel memory: 240k freed
May 31 20:58:58 localhost kernel: Adding 1510068k swap on /dev/hda7.  Priority:-1 extents:1
May 31 20:58:58 localhost kernel: EXT3 FS on hda1, internal journal
May 31 20:58:58 localhost kernel: kjournald starting.  Commit interval 5 seconds
May 31 20:58:58 localhost kernel: EXT3 FS on hda9, internal journal
May 31 20:58:58 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
May 31 20:58:58 localhost kernel: kjournald starting.  Commit interval 5 seconds
May 31 20:58:58 localhost kernel: EXT3 FS on hda8, internal journal
May 31 20:58:58 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
May 31 20:58:58 localhost kernel: kjournald starting.  Commit interval 5 seconds
May 31 20:58:58 localhost kernel: EXT3 FS on hda5, internal journal
May 31 20:58:58 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
May 31 20:58:58 localhost kernel: kjournald starting.  Commit interval 5 seconds
May 31 20:58:58 localhost kernel: EXT3 FS on hda6, internal journal
May 31 20:58:58 localhost kernel: EXT3-fs: mounted filesystem with ordered data mode.
May 31 20:58:58 localhost udev[3343]: removing device node '/dev/vcsa1'
May 31 20:58:58 localhost udev[3344]: removing device node '/dev/vcs1'
May 31 20:58:58 localhost udev[3361]: creating device node '/dev/vcsa1'
May 31 20:58:58 localhost udev[3367]: creating device node '/dev/vcs1'
May 31 20:58:58 localhost udev[3378]: removing device node '/dev/vcs1'
May 31 20:58:58 localhost udev[3386]: creating device node '/dev/vcs1'
May 31 20:59:04 localhost mysqld_safe[3781]: started
May 31 20:59:04 localhost mysqld[3785]: 050531 20:59:04  InnoDB: Started
May 31 20:59:04 localhost mysqld[3785]: /usr/sbin/mysqld: ready for connections.
May 31 20:59:04 localhost mysqld[3785]: Version: '4.0.24_Debian-10-log'  socket: '/var/run/mysqld/mysqld.sock'  port: 3306  Source distribution
May 31 20:59:05 localhost /etc/mysql/debian-start[3822]: Checking for crashed MySQL tables.
May 31 20:59:05 localhost atalkd[3838]: restart (2.0.2)
May 31 20:59:06 localhost atalkd[3838]: zip_getnetinfo for eth0
May 31 20:59:06 localhost smartd[3844]: smartd version 5.32 Copyright (C) 2002-4 Bruce Allen 
May 31 20:59:06 localhost smartd[3844]: Home page is http://smartmontools.sourceforge.net/  
May 31 20:59:06 localhost smartd[3844]: Opened configuration file /etc/smartd.conf 
May 31 20:59:06 localhost smartd[3844]: Configuration file /etc/smartd.conf parsed. 
May 31 20:59:06 localhost smartd[3844]: Device: /dev/hda, opened 
May 31 20:59:06 localhost smartd[3844]: Device: /dev/hda, not found in smartd database. 
May 31 20:59:07 localhost smartd[3844]: Device: /dev/hda, enabled SMART Attribute Autosave. 
May 31 20:59:07 localhost smartd[3844]: Device: /dev/hda, enabled SMART Automatic Offline Testing. 
May 31 20:59:07 localhost smartd[3844]: Device: /dev/hda, is SMART capable. Adding to "monitor" list. 
May 31 20:59:07 localhost smartd[3844]: Monitoring 1 ATA and 0 SCSI devices 
May 31 20:59:07 localhost smartd[3847]: smartd has fork()ed into background mode. New PID=3847. 
May 31 20:59:07 localhost smartd[3847]: file /var/run/smartd.pid written containing PID 3847 
May 31 20:59:08 localhost rpc.statd[3923]: Version 1.0.6 Starting
May 31 20:59:08 localhost rpc.statd[3923]: statd running as root. chown /var/lib/nfs/sm to choose different user 
May 31 20:59:09 localhost /usr/sbin/cron[3961]: (CRON) INFO (pidfile fd = 3)
May 31 20:59:09 localhost /usr/sbin/cron[3965]: (CRON) STARTUP (fork ok)
May 31 20:59:09 localhost Xprt_64: No matching visual for __GLcontextMode with visual class = 0 (32775), nplanes = 8
May 31 20:59:09 localhost /usr/sbin/cron[3965]: (CRON) INFO (Running @reboot jobs)
May 31 20:59:11 localhost udev[3993]: creating device node '/dev/vcs2'
May 31 20:59:11 localhost udev[3998]: creating device node '/dev/vcsa3'
May 31 20:59:11 localhost udev[3996]: creating device node '/dev/vcs3'
May 31 20:59:11 localhost udev[3994]: creating device node '/dev/vcsa2'
May 31 20:59:11 localhost udev[4024]: creating device node '/dev/vcs4'
May 31 20:59:11 localhost udev[4026]: creating device node '/dev/vcsa4'
May 31 20:59:11 localhost udev[4031]: creating device node '/dev/vcs5'
May 31 20:59:11 localhost udev[4033]: creating device node '/dev/vcsa5'
May 31 20:59:11 localhost udev[4056]: creating device node '/dev/vcs7'
May 31 20:59:11 localhost udev[4053]: creating device node '/dev/vcsa6'
May 31 20:59:11 localhost udev[4038]: creating device node '/dev/vcs6'
May 31 20:59:11 localhost udev[4077]: creating device node '/dev/vcsa7'
May 31 20:59:11 localhost udev[4078]: removing device node '/dev/vcs5'
May 31 20:59:11 localhost udev[4110]: removing device node '/dev/vcsa6'
May 31 20:59:11 localhost udev[4112]: removing device node '/dev/vcsa4'
May 31 20:59:11 localhost udev[4126]: removing device node '/dev/vcs6'
May 31 20:59:11 localhost udev[4139]: removing device node '/dev/vcs3'
May 31 20:59:11 localhost udev[4138]: removing device node '/dev/vcsa5'
May 31 20:59:11 localhost udev[4149]: removing device node '/dev/vcs4'
May 31 20:59:11 localhost udev[4167]: removing device node '/dev/vcsa3'
May 31 20:59:11 localhost udev[4172]: creating device node '/dev/vcs6'
May 31 20:59:11 localhost udev[4188]: creating device node '/dev/vcsa6'
May 31 20:59:11 localhost udev[4187]: creating device node '/dev/vcsa4'
May 31 20:59:11 localhost udev[4206]: creating device node '/dev/vcsa5'
May 31 20:59:11 localhost udev[4203]: creating device node '/dev/vcs5'
May 31 20:59:11 localhost udev[4205]: creating device node '/dev/vcsa3'
May 31 20:59:11 localhost udev[4218]: creating device node '/dev/vcs4'
May 31 20:59:11 localhost udev[4240]: creating device node '/dev/vcs3'
May 31 20:59:16 localhost atalkd[3838]: zip_getnetinfo for eth0
May 31 20:59:26 localhost udev[4268]: creating device node '/dev/vcs8'
May 31 20:59:26 localhost udev[4270]: creating device node '/dev/vcsa8'
May 31 20:59:26 localhost udev[4290]: removing device node '/dev/vcsa8'
May 31 20:59:26 localhost udev[4289]: removing device node '/dev/vcs8'
May 31 20:59:26 localhost udev[4305]: creating device node '/dev/vcs8'
May 31 20:59:26 localhost udev[4307]: creating device node '/dev/vcsa8'
May 31 20:59:26 localhost atalkd[3838]: zip_getnetinfo for eth0
May 31 20:59:28 localhost hald[3415]: Timed out waiting for hotplug event 898. Rebasing to 914
May 31 20:59:36 localhost atalkd[3838]: config for no router
May 31 20:59:37 localhost atalkd[3838]: ready 0/0/0
May 31 20:59:39 localhost udev[4335]: creating device node '/dev/vcs9'
May 31 20:59:39 localhost udev[4336]: creating device node '/dev/vcsa9'
May 31 20:59:43 localhost kernel: [drm] Initialized drm 1.0.0 20040925
May 31 20:59:43 localhost kernel: ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 19 (level, low) -> IRQ 20
May 31 20:59:43 localhost kernel: [drm] Initialized radeon 1.16.0 20050311 on minor 0: ATI Technologies Inc RV280 [Radeon 9200 PRO]
May 31 20:59:43 localhost udev[4383]: configured rule in '/etc/udev/rules.d/udev.rules[37]' applied, 'card0' becomes 'dri/%k'
May 31 20:59:43 localhost udev[4383]: creating device node '/dev/dri/card0'
May 31 20:59:43 localhost kernel: [drm] Loading R200 Microcode
May 31 20:59:49 localhost papd[4403]: restart (2.0.2)
May 31 20:59:49 localhost papd[4403]: CUPS support enabled (1.1)
May 31 20:59:49 localhost afpd[4405]: Registering CNID module [last]
May 31 20:59:49 localhost afpd[4405]: Registering CNID module [cdb]
May 31 20:59:49 localhost afpd[4405]: Registering CNID module [dbd]
May 31 20:59:49 localhost afpd[4405]: Loading ConfigFile
May 31 20:59:49 localhost afpd[4405]: Finished parsing Config File
May 31 20:59:55 localhost afpd[4405]: localhost:AFPServer@* started on 65280.221:128 (2.0.2)
May 31 20:59:55 localhost afpd[4405]: dsi_tcp: hostname 'linux-server' resolves to loopback address
May 31 20:59:55 localhost afpd[4405]: dsi_tcp: '192.168.1.2' on interface 'eth0' will be used instead.
May 31 20:59:55 localhost afpd[4405]: ASIP started on 192.168.1.2:548(5) (2.0.2)
May 31 20:59:55 localhost afpd[4405]: DSIConfigInit: Error registering afp://192.168.1.2/?NAME=localhost&ZONE= with SRVLOC
May 31 20:59:55 localhost afpd[4405]: uam: loading (/usr/lib/netatalk/uams_dhx.so)
May 31 20:59:55 localhost afpd[4405]: uam: uam not found (status=-1)
May 31 20:59:55 localhost afpd[4405]: uam: loading (/usr/lib/netatalk/uams_clrtxt.so)
May 31 20:59:55 localhost afpd[4405]: uam: uams_clrtxt.so loaded
May 31 20:59:55 localhost afpd[4405]: uam: loading (/usr/lib/netatalk/uams_randnum.so)
May 31 20:59:55 localhost afpd[4405]: uam: uam not found (status=-1)
May 31 20:59:55 localhost afpd[4405]: uam: "Cleartxt Passwrd" available
May 31 21:00:16 localhost gconfd (hannes-4484): (Version 2.8.1) wird gestartet, Prozesskennung 4484, Benutzer »hannes«
May 31 21:00:16 localhost gconfd (hannes-4484): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.mandatory« wurde an der Position 0 zu einer nur lesbaren Konfigurationsquelle aufgelöst
May 31 21:00:16 localhost gconfd (hannes-4484): Die Adresse »xml:readwrite:/home/hannes/.gconf« wurde an der Position 1 zu einer schreibbaren Konfigurationsquelle aufgelöst
May 31 21:00:16 localhost gconfd (hannes-4484): Die Adresse »xml:readonly:/etc/gconf/gconf.xml.defaults« wurde an der Position 2 zu einer nur lesbaren Konfigurationsquelle aufgelöst
May 31 21:00:30 localhost gconfd (hannes-4484): Die Adresse »xml:readwrite:/home/hannes/.gconf« wurde an der Position 0 zu einer schreibbaren Konfigurationsquelle aufgelöst

>> I've started xmms

May 31 21:01:28 localhost kernel: irq 20: nobody cared (try booting with the "irqpoll" option.
May 31 21:01:28 localhost kernel:  [<c014117a>] __report_bad_irq+0x2a/0xa0
May 31 21:01:28 localhost kernel:  [<c01409a0>] handle_IRQ_event+0x30/0x70
May 31 21:01:28 localhost kernel:  [<c0141290>] note_interrupt+0x80/0xf0
May 31 21:01:28 localhost kernel:  [<c0140b1c>] __do_IRQ+0x13c/0x140
May 31 21:01:28 localhost kernel:  [<c0105969>] do_IRQ+0x19/0x30
May 31 21:01:28 localhost kernel:  [<c0103b62>] common_interrupt+0x1a/0x20
May 31 21:01:28 localhost kernel:  [<c0100d70>] default_idle+0x0/0x30
May 31 21:01:28 localhost kernel:  [<c0100d93>] default_idle+0x23/0x30
May 31 21:01:28 localhost kernel:  [<c0100e60>] cpu_idle+0x80/0x90
May 31 21:01:28 localhost kernel:  [<c05189dd>] start_kernel+0x18d/0x1d0
May 31 21:01:28 localhost kernel:  [<c05183c0>] unknown_bootoption+0x0/0x1e0
May 31 21:01:28 localhost kernel: handlers:
May 31 21:01:28 localhost kernel: [<e0c56e20>] (radeon_driver_irq_handler+0x0/0xc0 [radeon])
May 31 21:01:28 localhost kernel: Disabling IRQ #20

>> I've stopped xmms

May 31 21:02:01 localhost kernel: Unable to handle kernel paging request at virtual address b587f060
May 31 21:02:01 localhost kernel:  printing eip:
May 31 21:02:01 localhost kernel: c03354d7
May 31 21:02:01 localhost kernel: *pde = 0c167067
May 31 21:02:01 localhost kernel: *pte = 00000000
May 31 21:02:01 localhost kernel: Oops: 0000 [#1]
May 31 21:02:01 localhost kernel: PREEMPT SMP 
May 31 21:02:01 localhost kernel: Modules linked in: radeon drm
May 31 21:02:01 localhost kernel: CPU:    0
May 31 21:02:01 localhost kernel: EIP:    0060:[<c03354d7>]    Not tainted VLI
May 31 21:02:01 localhost kernel: EFLAGS: 00210282   (2.6.12-rc5-mm1) 
May 31 21:02:01 localhost kernel: EIP is at snd_pcm_mmap_data_close+0x7/0x12
May 31 21:02:01 localhost kernel: eax: b587f000   ebx: c03354d0   ecx: ddb03a20   edx: cc4897d0
May 31 21:02:01 localhost kernel: esi: dfb59ec4   edi: ddb03a20   ebp: cc489750   esp: cc1d3f40
May 31 21:02:01 localhost kernel: ds: 007b   es: 007b   ss: 0068
May 31 21:02:01 localhost kernel: Process xmms (pid: 4650, threadinfo=cc1d2000 task=d518da30)
May 31 21:02:01 localhost kernel: Stack: c01542b6 cc489750 cc489778 dfb59e98 00000000 d878bcc0 cc489750 d878bcc0 
May 31 21:02:01 localhost kernel:        c0155c2f cc489750 cc489750 b587f000 b586f000 c015604b d878bcc0 cc489750 
May 31 21:02:01 localhost kernel:        cc4896f8 b586f000 b587f000 cc4896f8 d878bcc0 d878bcf0 00000002 cc1d2000 
May 31 21:02:01 localhost kernel: Call Trace:
May 31 21:02:01 localhost kernel:  [<c01542b6>] remove_vm_struct+0x96/0xa0
May 31 21:02:01 localhost kernel:  [<c0155c2f>] unmap_vma_list+0x1f/0x30
May 31 21:02:01 localhost kernel:  [<c015604b>] do_munmap+0x11b/0x150
May 31 21:02:01 localhost kernel:  [<c01560c5>] sys_munmap+0x45/0x70
May 31 21:02:01 localhost kernel:  [<c01031a5>] syscall_call+0x7/0xb
May 31 21:02:01 localhost kernel: Code: 00 00 00 00 8b 44 24 04 8b 40 50 8b 40 60 f0 ff 80 a4 00 00 00 c3 8d b4 26 00 00 00 00 8d bc 27 00 00 00 00 8b 44 24 04 8b 40 50 <8b> 40 60 f0 ff 88 a4 00 00 00 c3 51 52 e8 37 b8 0b 00 5a 59 e9 

Re: Fw: [Bugme-new] [Bug 4496] New: Interrupt-problem depends on sound-playing: irq 10: nobody cared!

[Bjorn Helgaas]

On Tuesday 31 May 2005 12:39 pm, Hannes Diethelm wrote:
> irq 20: nobody cared (try booting with the "irqpoll" option.
>  [<c014117a>] __report_bad_irq+0x2a/0xa0
>  [<c01409a0>] handle_IRQ_event+0x30/0x70
>  [<c0141290>] note_interrupt+0x80/0xf0
>  [<c0140b1c>] __do_IRQ+0x13c/0x140
>  [<c0105969>] do_IRQ+0x19/0x30
>  [<c0103b62>] common_interrupt+0x1a/0x20
>  [<c0100d70>] default_idle+0x0/0x30
>  [<c0100d93>] default_idle+0x23/0x30
>  [<c0100e60>] cpu_idle+0x80/0x90
>  [<c05189dd>] start_kernel+0x18d/0x1d0
>  [<c05183c0>] unknown_bootoption+0x0/0x1e0
> handlers:
> [<e0c56e20>] (radeon_driver_irq_handler+0x0/0xc0 [radeon])
> Disabling IRQ #20

I don't see anything obviously wrong in the information you sent.
The radeon seems to be the only thing on IRQ 20, we seem to be
getting a stream of interrupts there, but the radeon claims not
to be generating them.

But everything worked with the debian 2.6.8 kernel.  Can you look
at the logs there and see what changed?

> Unable to handle kernel paging request at virtual address b588e060
>  printing eip:
> c03354d7
> *pde = 0b06a067
> *pte = 00000000
> Oops: 0000 [#1]
> PREEMPT SMP
> Modules linked in: radeon drm
> CPU:    0
> EIP:    0060:[<c03354d7>]    Not tainted VLI
> EFLAGS: 00210282   (2.6.12-rc5-mm1)
> EIP is at snd_pcm_mmap_data_close+0x7/0x12
> eax: b588e000   ebx: c03354d0   ecx: cd879e00   edx: cc2d9250
> esi: df452ce8   edi: cd879e00   ebp: cd4d7908   esp: cb06ff40
> ds: 007b   es: 007b   ss: 0068
> Process xmms (pid: 4784, threadinfo=cb06e000 task=cb61c030)
> Stack: c01542b6 cd4d7908 cd4d7930 df452cbc 00000000 ded76040 cd4d7908
> ded76040
>        c0155c2f cd4d7908 cd4d7908 b588e000 b587e000 c015604b ded76040
> cd4d7908
>        cd4d71d0 b587e000 b588e000 cd4d71d0 ded76040 ded76070 00000002
> cb06e000
> Call Trace:
>  [<c01542b6>] remove_vm_struct+0x96/0xa0
>  [<c0155c2f>] unmap_vma_list+0x1f/0x30
>  [<c015604b>] do_munmap+0x11b/0x150
>  [<c01560c5>] sys_munmap+0x45/0x70
>  [<c01031a5>] syscall_call+0x7/0xb
> Code: 00 00 00 00 8b 44 24 04 8b 40 50 8b 40 60 f0 ff 80 a4 00 00 00 c3
> 8d b4 26  00 00 00 00 8d bc 27 00 00 00 00 8b 44 24 04 8b 40 50 <8b> 40
> 60 f0 ff 88 a4 00  00 00 c3 51 52 e8 37 b8 0b 00 5a 59 e9

This looks like http://bugzilla.kernel.org/show_bug.cgi?id=4662, which,
if I read the bugzilla correctly should be fixed by reverting this
patch:

    http://kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc5/2.6.12-rc5-mm1/broken-out/avoiding-mmap-fragmentation-fix-2.patch

Can you try reverting that (apply it with "patch -p1 -R").


-------------------------------------------------------
This SF.Net email is sponsored by Yahoo.
Introducing Yahoo! Search Developer Network - Create apps using Yahoo!
Search APIs Find out how you can build Yahoo! directly into your own
Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005

Re: Fw: [Bugme-new] [Bug 4496] New: Interrupt-problem depends on sound-playing: irq 10: nobody cared!

[Hannes Diethelm]

[-- Attachment #1: Type: text/plain, Size: 3328 bytes --]

Am Dienstag, den 31.05.2005, 13:51 -0600 schrieb Bjorn Helgaas: 
> On Tuesday 31 May 2005 12:39 pm, Hannes Diethelm wrote:
> > irq 20: nobody cared (try booting with the "irqpoll" option.
> >  [<c014117a>] __report_bad_irq+0x2a/0xa0
> >  [<c01409a0>] handle_IRQ_event+0x30/0x70
> >  [<c0141290>] note_interrupt+0x80/0xf0
> >  [<c0140b1c>] __do_IRQ+0x13c/0x140
> >  [<c0105969>] do_IRQ+0x19/0x30
> >  [<c0103b62>] common_interrupt+0x1a/0x20
> >  [<c0100d70>] default_idle+0x0/0x30
> >  [<c0100d93>] default_idle+0x23/0x30
> >  [<c0100e60>] cpu_idle+0x80/0x90
> >  [<c05189dd>] start_kernel+0x18d/0x1d0
> >  [<c05183c0>] unknown_bootoption+0x0/0x1e0
> > handlers:
> > [<e0c56e20>] (radeon_driver_irq_handler+0x0/0xc0 [radeon])
> > Disabling IRQ #20
> 
> I don't see anything obviously wrong in the information you sent.
> The radeon seems to be the only thing on IRQ 20, we seem to be
> getting a stream of interrupts there, but the radeon claims not
> to be generating them.
> 
> But everything worked with the debian 2.6.8 kernel.  Can you look
> at the logs there and see what changed?

I hope it is al you wanted...
I've seen that with the debian kernel, the interuptcounter is abaut
5-700. With the buggy kernel, the counter is au 2-300 but when i start
sound, it runns up to 18000!
With the kernel 2.6.11.7 without acpi, i have no interupt at radeon.

> 
> > Unable to handle kernel paging request at virtual address b588e060
> >  printing eip:
> > c03354d7
> > *pde = 0b06a067
> > *pte = 00000000
> > Oops: 0000 [#1]
> > PREEMPT SMP
> > Modules linked in: radeon drm
> > CPU:    0
> > EIP:    0060:[<c03354d7>]    Not tainted VLI
> > EFLAGS: 00210282   (2.6.12-rc5-mm1)
> > EIP is at snd_pcm_mmap_data_close+0x7/0x12
> > eax: b588e000   ebx: c03354d0   ecx: cd879e00   edx: cc2d9250
> > esi: df452ce8   edi: cd879e00   ebp: cd4d7908   esp: cb06ff40
> > ds: 007b   es: 007b   ss: 0068
> > Process xmms (pid: 4784, threadinfo=cb06e000 task=cb61c030)
> > Stack: c01542b6 cd4d7908 cd4d7930 df452cbc 00000000 ded76040 cd4d7908
> > ded76040
> >        c0155c2f cd4d7908 cd4d7908 b588e000 b587e000 c015604b ded76040
> > cd4d7908
> >        cd4d71d0 b587e000 b588e000 cd4d71d0 ded76040 ded76070 00000002
> > cb06e000
> > Call Trace:
> >  [<c01542b6>] remove_vm_struct+0x96/0xa0
> >  [<c0155c2f>] unmap_vma_list+0x1f/0x30
> >  [<c015604b>] do_munmap+0x11b/0x150
> >  [<c01560c5>] sys_munmap+0x45/0x70
> >  [<c01031a5>] syscall_call+0x7/0xb
> > Code: 00 00 00 00 8b 44 24 04 8b 40 50 8b 40 60 f0 ff 80 a4 00 00 00 c3
> > 8d b4 26  00 00 00 00 8d bc 27 00 00 00 00 8b 44 24 04 8b 40 50 <8b> 40
> > 60 f0 ff 88 a4 00  00 00 c3 51 52 e8 37 b8 0b 00 5a 59 e9
> 
> This looks like http://bugzilla.kernel.org/show_bug.cgi?id=4662, which,
> if I read the bugzilla correctly should be fixed by reverting this
> patch:
> 
>     http://kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc5/2.6.12-rc5-mm1/broken-out/avoiding-mmap-fragmentation-fix-2.patch
> 
> Can you try reverting that (apply it with "patch -p1 -R").

Ok, i aplyed this patch also. Now, i can play sound without problems,
but interupt 20 would be disabled if i start sound.

Ateatchments: 

dmesg with mm1, the patch you have mailed me at Tue, 31 May 2005
09:57:28 and the patch linked above.

dmesg debian kernel

div. /proc/interupt

.config of the Debian-Kernel

[-- Attachment #2: dmesg_after_sound.txt --]
[-- Type: text/plain, Size: 13842 bytes --]

Linux version 2.6.12-rc5-mm1 (hannes@linux-server) (gcc-Version 3.3.5 (Debian 1:3.3.5-12)) #3 SMP Tue May 31 23:32:09 CEST 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
511MB LOWMEM available.
found SMP MP-table at 000f5290
On node 0 totalpages: 131056
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126960 pages, LIFO batch:31
  HighMem zone: 0 pages, LIFO batch:1
DMI not present.
ACPI: RSDP (v000 VIA694                                ) @ 0x000f6590
ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: MADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff57c0
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:8 APIC version 17
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:8 APIC version 17
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
Built 1 zonelists
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
Kernel command line: root=/dev/hda1 ro vga=791
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 868.741 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 514100k/524224k available (3016k kernel code, 9636k reserved, 1162k data, 240k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1740.70 BogoMIPS (lpj=3481414)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel Pentium III (Coppermine) stepping 0a
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 1737.44 BogoMIPS (lpj=3474896)
CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Pentium III (Coppermine) stepping 0a
Total of 2 processors activated (3478.15 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Subsystem revision 20050408
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
audit: initializing netlink socket (disabled)
audit(1117575401.316:1): initialized
inotify device minor=63
Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org).
NTFS driver 2.1.23-WIP [Flags: R/O].
PCI: Enabling Via external APIC routing
vesafb: framebuffer at 0xd9000000, mapped to 0xe0880000, using 3072k, total 4096k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c7d6:0000
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
lp: driver loaded but no devices found
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA Apollo Pro 133 chipset
agpgart: AGP aperture is 64M @ 0xd0000000
cn_fork is registered
PNP: PS/2 controller doesn't have AUX irq; using default 0xc
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
lp0: using parport0 (interrupt-driven).
parport_pc: VIA parallel port: io=0x378, irq=7
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw-5bpFXmC1L3aJ4eUNlOKu3Q@public.gmane.org> and others
ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 16
eth0: 0000:00:0f.0, 00:08:9B:09:A9:4B, IRQ 16.
  Board assembly 729757-006, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 17
eth1: 0000:00:10.0, 00:08:9B:09:A9:4C, IRQ 17.
  Board assembly 729757-006, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
    ide0: BM-DMA at 0xcc00-0xcc07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: Maxtor 6B160P0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: PLEXTOR DVDR PX-716A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 1024KiB
hda: 320173056 sectors (163928 MB) w/8192KiB Cache, CHS=19929/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
ide-disk: probe of 1.0 failed with error 1
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
usbmon: debugs is not available
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 16
ohci_hcd 0000:00:13.0: OPTi Inc. 82C861
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: irq 16, io mem 0xd9a02000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 18
PCI: Via IRQ fixup for 0000:00:07.2, from 12 to 2
uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:07.2: irq 18, io base 0x0000b000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 18
PCI: Via IRQ fixup for 0000:00:07.3, from 12 to 2
uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:07.3: irq 18, io base 0x0000b400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-1: new low speed USB device using ohci_hcd and address 2
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
Advanced Linux Sound Architecture Driver Version 1.0.9rc3  (Thu Mar 24 10:33:39 2005 UTC).
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 19
PCI: Via IRQ fixup for 0000:00:07.5, from 11 to 3
PCI: Setting latency timer of device 0000:00:07.5 to 64
input: AT Translated Set 2 keyboard on isa0060/serio0
ALSA device list:
  #0: VIA 82C686A/B rev50 with ALC200,200P at 0xb800, irq 19
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 32Kbytes
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 6, 393216 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 212 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.2: Stephen Frost <sfrost-vhD3WmCyG/PR7s880joybQ@public.gmane.org>.  http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 5
Starting balanced_irq
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
kjournald starting.  Commit interval 5 seconds
Freeing unused kernel memory: 240k freed
Adding 1510068k swap on /dev/hda7.  Priority:-1 extents:1
EXT3 FS on hda1, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 19 (level, low) -> IRQ 20
[drm] Initialized radeon 1.16.0 20050311 on minor 0: ATI Technologies Inc RV280 [Radeon 9200 PRO]
[drm] Loading R200 Microcode
irq 20: nobody cared (try booting with the "irqpoll" option.
 [<c014117a>] __report_bad_irq+0x2a/0xa0
 [<c01409a0>] handle_IRQ_event+0x30/0x70
 [<c0141290>] note_interrupt+0x80/0xf0
 [<c0140b1c>] __do_IRQ+0x13c/0x140
 [<c0105969>] do_IRQ+0x19/0x30
 [<c0103b62>] common_interrupt+0x1a/0x20
 [<c0100d70>] default_idle+0x0/0x30
 [<c0100d93>] default_idle+0x23/0x30
 [<c0100e60>] cpu_idle+0x80/0x90
 [<c05189dd>] start_kernel+0x18d/0x1d0
 [<c05183c0>] unknown_bootoption+0x0/0x1e0
handlers:
[<e0c56e20>] (radeon_driver_irq_handler+0x0/0xc0 [radeon])
Disabling IRQ #20

[-- Attachment #3: dmesg_before_sound.txt --]
[-- Type: text/plain, Size: 13278 bytes --]

Linux version 2.6.12-rc5-mm1 (hannes@linux-server) (gcc-Version 3.3.5 (Debian 1:3.3.5-12)) #3 SMP Tue May 31 23:32:09 CEST 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
511MB LOWMEM available.
found SMP MP-table at 000f5290
On node 0 totalpages: 131056
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126960 pages, LIFO batch:31
  HighMem zone: 0 pages, LIFO batch:1
DMI not present.
ACPI: RSDP (v000 VIA694                                ) @ 0x000f6590
ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: MADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff57c0
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:8 APIC version 17
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:8 APIC version 17
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000)
Built 1 zonelists
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Initializing CPU#0
Kernel command line: root=/dev/hda1 ro vga=791
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 868.741 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 514100k/524224k available (3016k kernel code, 9636k reserved, 1162k data, 240k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1740.70 BogoMIPS (lpj=3481414)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel Pentium III (Coppermine) stepping 0a
Booting processor 1/1 eip 2000
Initializing CPU#1
Calibrating delay using timer specific routine.. 1737.44 BogoMIPS (lpj=3474896)
CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Pentium III (Coppermine) stepping 0a
Total of 2 processors activated (3478.15 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 pin1=2 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Subsystem revision 20050408
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
audit: initializing netlink socket (disabled)
audit(1117575401.316:1): initialized
inotify device minor=63
Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org).
NTFS driver 2.1.23-WIP [Flags: R/O].
PCI: Enabling Via external APIC routing
vesafb: framebuffer at 0xd9000000, mapped to 0xe0880000, using 3072k, total 4096k
vesafb: mode is 1024x768x16, linelength=2048, pages=1
vesafb: protected mode interface info at c7d6:0000
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
lp: driver loaded but no devices found
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected VIA Apollo Pro 133 chipset
agpgart: AGP aperture is 64M @ 0xd0000000
cn_fork is registered
PNP: PS/2 controller doesn't have AUX irq; using default 0xc
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
lp0: using parport0 (interrupt-driven).
parport_pc: VIA parallel port: io=0x378, irq=7
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw-5bpFXmC1L3aJ4eUNlOKu3Q@public.gmane.org> and others
ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 16
eth0: 0000:00:0f.0, 00:08:9B:09:A9:4B, IRQ 16.
  Board assembly 729757-006, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 17
eth1: 0000:00:10.0, 00:08:9B:09:A9:4C, IRQ 17.
  Board assembly 729757-006, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
    ide0: BM-DMA at 0xcc00-0xcc07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: Maxtor 6B160P0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: PLEXTOR DVDR PX-716A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 1024KiB
hda: 320173056 sectors (163928 MB) w/8192KiB Cache, CHS=19929/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
ide-disk: probe of 1.0 failed with error 1
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
usbmon: debugs is not available
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 16
ohci_hcd 0000:00:13.0: OPTi Inc. 82C861
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: irq 16, io mem 0xd9a02000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
USB Universal Host Controller Interface driver v2.3
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 18
PCI: Via IRQ fixup for 0000:00:07.2, from 12 to 2
uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:07.2: irq 18, io base 0x0000b000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 18
PCI: Via IRQ fixup for 0000:00:07.3, from 12 to 2
uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:07.3: irq 18, io base 0x0000b400
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-1: new low speed USB device using ohci_hcd and address 2
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-1
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
Advanced Linux Sound Architecture Driver Version 1.0.9rc3  (Thu Mar 24 10:33:39 2005 UTC).
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 19
PCI: Via IRQ fixup for 0000:00:07.5, from 11 to 3
PCI: Setting latency timer of device 0000:00:07.5 to 64
input: AT Translated Set 2 keyboard on isa0060/serio0
ALSA device list:
  #0: VIA 82C686A/B rev50 with ALC200,200P at 0xb800, irq 19
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 32Kbytes
TCP established hash table entries: 32768 (order: 7, 524288 bytes)
TCP bind hash table entries: 32768 (order: 6, 393216 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 212 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.2: Stephen Frost <sfrost-vhD3WmCyG/PR7s880joybQ@public.gmane.org>.  http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 5
Starting balanced_irq
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
kjournald starting.  Commit interval 5 seconds
Freeing unused kernel memory: 240k freed
Adding 1510068k swap on /dev/hda7.  Priority:-1 extents:1
EXT3 FS on hda1, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 19 (level, low) -> IRQ 20
[drm] Initialized radeon 1.16.0 20050311 on minor 0: ATI Technologies Inc RV280 [Radeon 9200 PRO]
[drm] Loading R200 Microcode

[-- Attachment #4: dmesg_debian.txt --]
[-- Type: text/plain, Size: 15389 bytes --]

Linux version 2.6.8 (root@linux-server) (gcc-Version 3.3.5 (Debian 1:3.3.5-8)) #1 SMP Fri Apr 15 00:36:41 CEST 2005
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
511MB LOWMEM available.
found SMP MP-table at 000f5290
On node 0 totalpages: 131056
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 126960 pages, LIFO batch:16
  HighMem zone: 0 pages, LIFO batch:1
DMI not present.
ACPI: RSDP (v000 VIA694                                    ) @ 0x000f6590
ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000
ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040
ACPI: MADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff57c0
ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:8 APIC version 17
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:8 APIC version 17
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: Assigned apic_id 2
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: root=/dev/hda1 ro vga=773 
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 868.652 MHz processor.
Using tsc for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 513976k/524224k available (2959k kernel code, 9488k reserved, 1085k data, 204k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1708.03 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000
CPU: After vendor identify, caps:  0387fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
CPU: After all inits, caps:        0383fbff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel Pentium III (Coppermine) stepping 0a
per-CPU timeslice cutoff: 731.72 usecs.
task migration cache decay timeout: 1 msecs.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Booting processor 1/1 eip 2000
Initializing CPU#1
masked ExtINT on CPU#1
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Calibrating delay loop... 1732.60 BogoMIPS
CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000
CPU: After vendor identify, caps:  0387fbff 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
CPU: After all inits, caps:        0383fbff 00000000 00000000 00000040
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel Pentium III (Coppermine) stepping 0a
Total of 2 processors activated (3440.64 BogoMIPS).
ENABLING IO-APIC IRQs
init IO_APIC IRQs
 IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
..TIMER: vector=0x31 pin1=2 pin2=-1
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 868.0457 MHz.
..... host bus clock speed is 133.0608 MHz.
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
CPU0:  online
 domain 0: span 3
  groups: 1 2
CPU1:  online
 domain 0: span 3
  groups: 2 1
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=2
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Subsystem revision 20040326
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00fbea0
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbed0, dseg 0xf0000
PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:07.5[C] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 17
ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
ACPI: PCI interrupt 0000:02:07.0[A] -> GSI 19 (level, low) -> IRQ 19
number of MP IRQ sources: 15.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
.......    : physical APIC id: 02
.......    : Delivery Type: 0
.......    : LTS          : 0
.... register #01: 00178011
.......     : max redirection entries: 0017
.......     : PRQ implemented: 1
.......     : IO APIC version: 0011
.... register #02: 00000000
.......     : arbitration: 00
.... IRQ redirection table:
 NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
 00 000 00  1    0    0   0   0    0    0    00
 01 003 03  0    0    0   0   0    1    1    39
 02 003 03  0    0    0   0   0    1    1    31
 03 003 03  0    0    0   0   0    1    1    41
 04 003 03  0    0    0   0   0    1    1    49
 05 003 03  0    0    0   0   0    1    1    51
 06 003 03  0    0    0   0   0    1    1    59
 07 003 03  0    0    0   0   0    1    1    61
 08 003 03  0    0    0   0   0    1    1    69
 09 003 03  0    1    0   1   0    1    1    71
 0a 003 03  1    1    0   1   0    1    1    79
 0b 003 03  1    1    0   1   0    1    1    81
 0c 003 03  0    0    0   0   0    1    1    89
 0d 003 03  0    0    0   0   0    1    1    91
 0e 003 03  0    0    0   0   0    1    1    99
 0f 003 03  0    0    0   0   0    1    1    A1
 10 003 03  1    1    0   1   0    1    1    B9
 11 003 03  1    1    0   1   0    1    1    B1
 12 003 03  1    1    0   1   0    1    1    A9
 13 003 03  1    1    0   1   0    1    1    C1
 14 000 00  1    0    0   0   0    0    0    00
 15 000 00  1    0    0   0   0    0    0    00
 16 000 00  1    0    0   0   0    0    0    00
 17 000 00  1    0    0   0   0    0    0    00
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ17 -> 0:17
IRQ18 -> 0:18
IRQ19 -> 0:19
.................................... done.
vesafb: framebuffer at 0xd9000000, mapped to 0xe0806000, size 1536k
vesafb: mode is 1024x768x8, linelength=1024, pages=4
vesafb: protected mode interface info at c7d6:0000
vesafb: scrolling: redraw
fb0: VESA VGA frame buffer device
Starting balanced_irq
audit: initializing netlink socket (disabled)
audit(1117576483.133:0): initialized
Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org).
NTFS driver 2.1.15 [Flags: R/O].
udf: registering filesystem
PCI: Enabling Via external APIC routing
PCI: Via IRQ fixup for 0000:00:07.2, from 12 to 11
PCI: Via IRQ fixup for 0000:00:07.3, from 12 to 11
PCI: Via IRQ fixup for 0000:00:07.5, from 11 to 10
ACPI: Power Button (FF) [PWRF]
ACPI: Processor [CPU0] (supports C1)
ACPI: Processor [CPU1] (supports C1)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Console: switching to colour frame buffer device 128x48
lp: driver loaded but no devices found
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
lp0: using parport0 (interrupt-driven).
parport_pc: VIA parallel port: io=0x378, irq=7
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw-5bpFXmC1L3aJ4eUNlOKu3Q@public.gmane.org> and others
ACPI: PCI interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 18
eth0: 0000:00:0f.0, 00:08:9B:09:A9:4B, IRQ 18.
  Board assembly 729757-006, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 17
eth1: 0000:00:10.0, 00:08:9B:09:A9:4C, IRQ 17.
  Board assembly 729757-006, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0x04f4518b).
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
    ide0: BM-DMA at 0xcc00-0xcc07, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 6B160P0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: PLEXTOR DVDR PX-716A, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 1024KiB
hda: 320173056 sectors (163928 MB) w/8192KiB Cache, CHS=19929/255/63, UDMA(100)
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 18
ohci_hcd 0000:00:13.0: OPTi Inc. 82C861
ohci_hcd 0000:00:13.0: irq 18, pci mem e098b000
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:13.0: WARNING: OPTi workarounds unavailable
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:07.2: irq 11, io base 0000b000
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:07.3: irq 11, io base 0000b400
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
Advanced Linux Sound Architecture Driver Version 1.0.4 (Mon May 17 14:31:44 2004 UTC).
ACPI: PCI interrupt 0000:00:07.5[C] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:07.5 to 64
usb 1-1: new low speed USB device using address 2
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-1
ALSA device list:
  #0: VIA 82C686A/B rev50 at 0xb800, irq 10
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 32768)
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 300 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <sfrost-vhD3WmCyG/PR7s880joybQ@public.gmane.org>.  http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 5
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 204k freed
Adding 1510068k swap on /dev/hda7.  Priority:-1 extents:1
EXT3 FS on hda1, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda8, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hda6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA Apollo Pro 133 chipset
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 64M @ 0xd0000000
mtrr: 0xd9000000,0x400000 overlaps existing 0xd9000000,0x100000
mtrr: 0xd9000000,0x400000 overlaps existing 0xd9000000,0x100000
[drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies Inc RV280 [Radeon 9200 PRO]
[drm] Loading R200 Microcode

[-- Attachment #5: interrupts_after_sound.txt --]
[-- Type: text/plain, Size: 672 bytes --]

           CPU0       CPU1       
  0:      29625      25694    IO-APIC-edge  timer
  1:        188        150    IO-APIC-edge  i8042
  7:          0          0    IO-APIC-edge  parport0
  9:          0          0   IO-APIC-level  acpi
 14:       5887       3132    IO-APIC-edge  ide0
 15:       1083        724    IO-APIC-edge  ide1
 16:      11874         12   IO-APIC-level  ohci_hcd:usb1, eth0
 18:        381          1   IO-APIC-level  uhci_hcd:usb2, uhci_hcd:usb3
 19:      12905       8310   IO-APIC-level  VIA686A
 20:      18379     181621   IO-APIC-level  radeon@PCI:2:7:0
NMI:          0          0 
LOC:      55212      55323 
ERR:          0
MIS:          0

[-- Attachment #6: interrupts_before_sound.txt --]
[-- Type: text/plain, Size: 672 bytes --]

           CPU0       CPU1       
  0:      24294      18972    IO-APIC-edge  timer
  1:        162        270    IO-APIC-edge  i8042
  7:          0          0    IO-APIC-edge  parport0
  9:          0          0   IO-APIC-level  acpi
 14:       5577       3111    IO-APIC-edge  ide0
 15:        739        636    IO-APIC-edge  ide1
 16:       7870         13   IO-APIC-level  ohci_hcd:usb1, eth0
 18:        879          1   IO-APIC-level  uhci_hcd:usb2, uhci_hcd:usb3
 19:       8206       5315   IO-APIC-level  VIA686A
 20:        293        269   IO-APIC-level  radeon@PCI:2:7:0
NMI:          0          0 
LOC:      43259      43180 
ERR:          0
MIS:          0

[-- Attachment #7: interrupts_debian.txt --]
[-- Type: text/plain, Size: 657 bytes --]

           CPU0       CPU1       
  0:     616350     117675    IO-APIC-edge  timer
  1:        205        342    IO-APIC-edge  i8042
  7:          0          0    IO-APIC-edge  parport0
  9:          0          0   IO-APIC-level  acpi
 10:      13057       9860   IO-APIC-level  VIA686A
 11:       1635        398   IO-APIC-level  uhci_hcd, uhci_hcd
 14:     128956       2960    IO-APIC-edge  ide0
 15:       1091       1081    IO-APIC-edge  ide1
 18:      17974          0   IO-APIC-level  ohci_hcd, eth0
 19:        528        746   IO-APIC-level  radeon@PCI:2:7:0
NMI:          0          0 
LOC:     734013     733935 
ERR:          0
MIS:          0

[-- Attachment #8: interupts_kernel2.6.11.7_without_acpi.txt --]
[-- Type: text/plain, Size: 556 bytes --]

           CPU0       CPU1       
  0:     109062      95233    IO-APIC-edge  timer
  1:        122        161    IO-APIC-edge  i8042
  2:          0          0          XT-PIC  cascade
  7:          0          0    IO-APIC-edge  parport0
 11:      11415         11   IO-APIC-level  ohci_hcd, VIA686A, eth0
 12:          0          0   IO-APIC-level  uhci_hcd, uhci_hcd
 14:       6035       3541    IO-APIC-edge  ide0
 15:        917        750    IO-APIC-edge  ide1
NMI:          0          0 
LOC:     204790     204112 
ERR:          0
MIS:          0

[-- Attachment #9: kernel_debian_config.txt --]
[-- Type: text/plain, Size: 30434 bytes --]

#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y

#
# General setup
#
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_HOTPLUG=y
# CONFIG_IKCONFIG is not set
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
# CONFIG_X86_EMU486 is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_HPET_TIMER=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
# CONFIG_SCHED_SMT is not set
CONFIG_PREEMPT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_TSC=y
CONFIG_X86_MCE=y
# CONFIG_X86_MCE_NONFATAL is not set
# CONFIG_X86_MCE_P4THERMAL is not set
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
CONFIG_HAVE_DEC_LOCK=y
# CONFIG_REGPARM is not set

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_SOFTWARE_SUSPEND is not set
# CONFIG_PM_DISK is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_INTERPRETER=y
# CONFIG_ACPI_SLEEP is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
# CONFIG_X86_PM_TIMER is not set

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY_PROC=y
CONFIG_PCI_NAMES=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCMCIA/CardBus support
#
# CONFIG_PCMCIA is not set
CONFIG_PCMCIA_PROBE=y

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
# CONFIG_PNPBIOS_PROC_FS is not set

#
# Block devices
#
CONFIG_BLK_DEV_FD=y
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_LBD=y

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_TASKFILE_IO=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_ADMA=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
# CONFIG_BLK_DEV_SD is not set
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
# CONFIG_CHR_DEV_SG is not set
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set

#
# SCSI Transport Attributes
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set

#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_MEGARAID is not set
# CONFIG_SCSI_SATA is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
# CONFIG_IEEE1394_OUI_DB is not set
# CONFIG_IEEE1394_EXTRA_CONFIG_ROMS is not set

#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=m

#
# Protocol Drivers
#
# CONFIG_IEEE1394_VIDEO1394 is not set
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
CONFIG_IEEE1394_RAWIO=m
# CONFIG_IEEE1394_CMP is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Networking support
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=y
# CONFIG_IP_NF_FTP is not set
# CONFIG_IP_NF_IRC is not set
# CONFIG_IP_NF_TFTP is not set
# CONFIG_IP_NF_AMANDA is not set
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_LIMIT=y
CONFIG_IP_NF_MATCH_IPRANGE=y
CONFIG_IP_NF_MATCH_MAC=y
CONFIG_IP_NF_MATCH_PKTTYPE=y
CONFIG_IP_NF_MATCH_MARK=y
CONFIG_IP_NF_MATCH_MULTIPORT=y
CONFIG_IP_NF_MATCH_TOS=y
CONFIG_IP_NF_MATCH_RECENT=y
CONFIG_IP_NF_MATCH_ECN=y
CONFIG_IP_NF_MATCH_DSCP=y
CONFIG_IP_NF_MATCH_AH_ESP=y
CONFIG_IP_NF_MATCH_LENGTH=y
CONFIG_IP_NF_MATCH_TTL=y
CONFIG_IP_NF_MATCH_TCPMSS=y
CONFIG_IP_NF_MATCH_HELPER=y
CONFIG_IP_NF_MATCH_STATE=y
CONFIG_IP_NF_MATCH_CONNTRACK=y
CONFIG_IP_NF_MATCH_OWNER=y
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
CONFIG_IP_NF_NAT=y
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_SAME=y
# CONFIG_IP_NF_NAT_LOCAL is not set
# CONFIG_IP_NF_NAT_SNMP_BASIC is not set
CONFIG_IP_NF_MANGLE=y
CONFIG_IP_NF_TARGET_TOS=y
CONFIG_IP_NF_TARGET_ECN=y
CONFIG_IP_NF_TARGET_DSCP=y
CONFIG_IP_NF_TARGET_MARK=y
CONFIG_IP_NF_TARGET_CLASSIFY=y
CONFIG_IP_NF_TARGET_LOG=y
CONFIG_IP_NF_TARGET_ULOG=y
CONFIG_IP_NF_TARGET_TCPMSS=y
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
CONFIG_IP_NF_ARP_MANGLE=y
CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_RAW=m
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
CONFIG_ATALK=y
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
CONFIG_EEPRO100=y
# CONFIG_EEPRO100_PIO is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_MOUSEDEV_PSAUX_ENABLE=y
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_ACPI is not set
CONFIG_SERIAL_8250_NR_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
# CONFIG_QIC02_TAPE is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_INTEL_MCH is not set
# CONFIG_AGP_NVIDIA is not set
CONFIG_AGP_SIS=m
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=m
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_GAMMA is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
# CONFIG_DRM_MGA is not set
CONFIG_DRM_SIS=m
# CONFIG_MWAVE is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# I2C support
#
CONFIG_I2C=y
# CONFIG_I2C_CHARDEV is not set

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
CONFIG_I2C_ISA=y
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
CONFIG_I2C_VIAPRO=m
# CONFIG_I2C_VOODOO3 is not set

#
# Hardware Sensors Chip support
#
CONFIG_I2C_SENSOR=y
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_MAX1619 is not set
CONFIG_SENSORS_VIA686A=y
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83627HF is not set

#
# Other I2C Chip support
#
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_RTC8564 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set

#
# Graphics support
#
CONFIG_FB=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set

#
# Logo configuration
#
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
CONFIG_LOGO_LINUX_VGA16=y
# CONFIG_LOGO_LINUX_CLUT224 is not set

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set

#
# ISA devices
#
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_WAVEFRONT is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set

#
# PCI devices
#
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_SONICVIBES is not set
CONFIG_SND_VIA82XX=y
# CONFIG_SND_VX222 is not set

#
# ALSA USB devices
#
# CONFIG_SND_USB_AUDIO is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set

#
# USB support
#
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_UHCI_HCD=y

#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set

#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_HPUSBSCSI is not set

#
# USB Multimedia devices
#

#
# Video4Linux support is needed for USB Multimedia device support
#

#
# USB Network adaptors
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_TEST is not set

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ASFS_FS is not set
CONFIG_HFS_FS=y
CONFIG_HFSPLUS_FS=y
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
# CONFIG_NFSD_V3 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_EXPORTFS=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
CONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=y
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y

#
# Profiling support
#
# CONFIG_PROFILING is not set

#
# Kernel hacking
#
# CONFIG_DEBUG_KERNEL is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_FRAME_POINTER is not set
# CONFIG_4KSTACKS is not set
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y

#
# Security options
#
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
# CONFIG_CRYPTO is not set

#
# Library routines
#
# CONFIG_CRC_CCITT is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_PC=y

Re: Fw: [Bugme-new] [Bug 4496] New: Interrupt-problem depends on sound-playing: irq 10: nobody cared!

[Hannes Diethelm]

Hmm... I found another ting...

In the working kernel (2.6.11.7 whithout acpi), ther are this lines in
dmesg:

[drm] Initialized drm 1.0.0 20040925
PCI: No IRQ known for interrupt pin C of device 0000:02:07.0. Probably
buggy MP table.
[drm] Initialized radeon 1.14.0 20050125 on minor 0: ATI Technologies
Inc RV280 [Radeon 9200 PRO]
[drm] Loading R200 Microcode


In the buggy kernel:

[drm] Initialized drm 1.0.0 20040925
ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 19 (level, low) -> IRQ 20
[drm] Initialized radeon 1.16.0 20050311 on minor 0: ATI Technologies
Inc RV280 [Radeon 9200 PRO]
[drm] Loading R200 Microcode

I'll restart and mail you the hole informations...




-------------------------------------------------------
This SF.Net email is sponsored by Yahoo.
Introducing Yahoo! Search Developer Network - Create apps using Yahoo!
Search APIs Find out how you can build Yahoo! directly into your own
Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005