From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hannes Diethelm Subject: Re: Fw: [Bugme-new] [Bug 4496] New: Interrupt-problem depends on sound-playing: irq 10: nobody cared! Date: Tue, 31 May 2005 21:20:33 +0200 Message-ID: <1117567234.4711.1.camel@localhost.localdomain> References: <20050525224328.734adc03.akpm@osdl.org> <200505310957.28789.bjorn.helgaas@hp.com> <1117564793.4816.11.camel@localhost.localdomain> <200505311249.07949.bjorn.helgaas@hp.com> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="=-w0/JahAwSBj7j61Llyv2" Return-path: In-Reply-To: <200505311249.07949.bjorn.helgaas-VXdhtT5mjnY@public.gmane.org> Sender: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org Errors-To: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: Bjorn Helgaas Cc: Andrew Morton , rdunlap-/UHa2rfvQTnk1uMJSBkQmQ@public.gmane.org, acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org, perex-/Fr2/VpizcU@public.gmane.org List-Id: linux-acpi@vger.kernel.org --=-w0/JahAwSBj7j61Llyv2 Content-Type: text/plain Content-Transfer-Encoding: 7Bit Am Dienstag, den 31.05.2005, 12:49 -0600 schrieb Bjorn Helgaas: > Can you please collect the complete dmesg log and contents of > /proc/interrupts? Something to read ;) --=-w0/JahAwSBj7j61Llyv2 Content-Disposition: attachment; filename=dmesg_after_sound.txt Content-Type: text/plain; name=dmesg_after_sound.txt; charset=iso-8859-1 Content-Transfer-Encoding: 7Bit Linux version 2.6.12-rc5-mm1 (hannes@linux-server) (gcc-Version 3.3.5 (Debian 1:3.3.5-12)) #2 SMP Tue May 31 19:57:32 CEST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 511MB LOWMEM available. found SMP MP-table at 000f5290 On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 DMI not present. ACPI: RSDP (v000 VIA694 ) @ 0x000f6590 ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000 ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040 ACPI: MADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff57c0 ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:8 APIC version 17 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:8 APIC version 17 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000) Built 1 zonelists mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 Kernel command line: root=/dev/hda1 ro vga=791 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 868.755 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 514100k/524224k available (3016k kernel code, 9636k reserved, 1162k data, 240k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1740.70 BogoMIPS (lpj=3481416) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU serial number disabled. CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel Pentium III (Coppermine) stepping 0a Booting processor 1/1 eip 2000 Initializing CPU#1 Calibrating delay using timer specific routine.. 1737.41 BogoMIPS (lpj=3474821) CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU serial number disabled. CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Pentium III (Coppermine) stepping 0a Total of 2 processors activated (3478.11 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) mtrr: your CPUs had inconsistent variable MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. ACPI: Subsystem revision 20050408 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 *12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 11 devices PnPBIOS: Disabled by ACPI PNP SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report audit: initializing netlink socket (disabled) audit(1117565920.316:1): initialized inotify device minor=63 Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org). NTFS driver 2.1.23-WIP [Flags: R/O]. PCI: Enabling Via external APIC routing vesafb: framebuffer at 0xd9000000, mapped to 0xe0880000, using 3072k, total 4096k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: protected mode interface info at c7d6:0000 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found lp: driver loaded but no devices found Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected VIA Apollo Pro 133 chipset agpgart: AGP aperture is 64M @ 0xd0000000 cn_fork is registered PNP: PS/2 controller doesn't have AUX irq; using default 0xc PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport_pc: VIA 686A/8231 detected parport_pc: probing current configuration parport_pc: Current parallel port base: 0x378 parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] lp0: using parport0 (interrupt-driven). parport_pc: VIA parallel port: io=0x378, irq=7 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 16 eth0: 0000:00:0f.0, 00:08:9B:09:A9:4B, IRQ 16. Board assembly 729757-006, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 17 eth1: 0000:00:10.0, 00:08:9B:09:A9:4C, IRQ 17. Board assembly 729757-006, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:07.1 PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1 ide0: BM-DMA at 0xcc00-0xcc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: Maxtor 6B160P0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: PLEXTOR DVDR PX-716A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: max request size: 1024KiB hda: 320173056 sectors (163928 MB) w/8192KiB Cache, CHS=19929/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 > ide-disk: probe of 1.0 failed with error 1 hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.20 usbmon: debugs is not available ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 16 ohci_hcd 0000:00:13.0: OPTi Inc. 82C861 ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:13.0: irq 16, io mem 0xd9a02000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 18 PCI: Via IRQ fixup for 0000:00:07.2, from 12 to 2 uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:07.2: irq 18, io base 0x0000b000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 18 PCI: Via IRQ fixup for 0000:00:07.3, from 12 to 2 uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:07.3: irq 18, io base 0x0000b400 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 1-1: new low speed USB device using ohci_hcd and address 2 usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver mice: PS/2 mouse device common for all mice Advanced Linux Sound Architecture Driver Version 1.0.9rc3 (Thu Mar 24 10:33:39 2005 UTC). ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 19 PCI: Via IRQ fixup for 0000:00:07.5, from 11 to 3 PCI: Setting latency timer of device 0000:00:07.5 to 64 input: AT Translated Set 2 keyboard on isa0060/serio0 ALSA device list: #0: VIA 82C686A/B rev50 with ALC200,200P at 0xb800, irq 19 NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 32Kbytes TCP established hash table entries: 32768 (order: 7, 524288 bytes) TCP bind hash table entries: 32768 (order: 6, 393216 bytes) TCP: Hash tables configured (established 32768 bind 32768) ip_conntrack version 2.1 (4095 buckets, 32760 max) - 212 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.2: Stephen Frost . http://snowman.net/projects/ipt_recent/ arp_tables: (C) 2002 David S. Miller NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 5 Starting balanced_irq EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. kjournald starting. Commit interval 5 seconds Freeing unused kernel memory: 240k freed Adding 1510068k swap on /dev/hda7. Priority:-1 extents:1 EXT3 FS on hda1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. [drm] Initialized drm 1.0.0 20040925 ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 19 (level, low) -> IRQ 20 [drm] Initialized radeon 1.16.0 20050311 on minor 0: ATI Technologies Inc RV280 [Radeon 9200 PRO] [drm] Loading R200 Microcode irq 20: nobody cared (try booting with the "irqpoll" option. [] __report_bad_irq+0x2a/0xa0 [] handle_IRQ_event+0x30/0x70 [] note_interrupt+0x80/0xf0 [] __do_IRQ+0x13c/0x140 [] do_IRQ+0x19/0x30 [] common_interrupt+0x1a/0x20 [] default_idle+0x0/0x30 [] default_idle+0x23/0x30 [] cpu_idle+0x80/0x90 [] start_kernel+0x18d/0x1d0 [] unknown_bootoption+0x0/0x1e0 handlers: [] (radeon_driver_irq_handler+0x0/0xc0 [radeon]) Disabling IRQ #20 Unable to handle kernel paging request at virtual address b587f060 printing eip: c03354d7 *pde = 0c167067 *pte = 00000000 Oops: 0000 [#1] PREEMPT SMP Modules linked in: radeon drm CPU: 0 EIP: 0060:[] Not tainted VLI EFLAGS: 00210282 (2.6.12-rc5-mm1) EIP is at snd_pcm_mmap_data_close+0x7/0x12 eax: b587f000 ebx: c03354d0 ecx: ddb03a20 edx: cc4897d0 esi: dfb59ec4 edi: ddb03a20 ebp: cc489750 esp: cc1d3f40 ds: 007b es: 007b ss: 0068 Process xmms (pid: 4650, threadinfo=cc1d2000 task=d518da30) Stack: c01542b6 cc489750 cc489778 dfb59e98 00000000 d878bcc0 cc489750 d878bcc0 c0155c2f cc489750 cc489750 b587f000 b586f000 c015604b d878bcc0 cc489750 cc4896f8 b586f000 b587f000 cc4896f8 d878bcc0 d878bcf0 00000002 cc1d2000 Call Trace: [] remove_vm_struct+0x96/0xa0 [] unmap_vma_list+0x1f/0x30 [] do_munmap+0x11b/0x150 [] sys_munmap+0x45/0x70 [] syscall_call+0x7/0xb Code: 00 00 00 00 8b 44 24 04 8b 40 50 8b 40 60 f0 ff 80 a4 00 00 00 c3 8d b4 26 00 00 00 00 8d bc 27 00 00 00 00 8b 44 24 04 8b 40 50 <8b> 40 60 f0 ff 88 a4 00 00 00 c3 51 52 e8 37 b8 0b 00 5a 59 e9 --=-w0/JahAwSBj7j61Llyv2 Content-Disposition: attachment; filename=dmesg_before_sound.txt Content-Type: text/plain; name=dmesg_before_sound.txt; charset=iso-8859-1 Content-Transfer-Encoding: 7Bit Linux version 2.6.12-rc5-mm1 (hannes@linux-server) (gcc-Version 3.3.5 (Debian 1:3.3.5-12)) #2 SMP Tue May 31 19:57:32 CEST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 511MB LOWMEM available. found SMP MP-table at 000f5290 On node 0 totalpages: 131056 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 126960 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 DMI not present. ACPI: RSDP (v000 VIA694 ) @ 0x000f6590 ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3000 ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff3040 ACPI: MADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1fff57c0 ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 6:8 APIC version 17 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 6:8 APIC version 17 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 20000000 (gap: 20000000:dec00000) Built 1 zonelists mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 Kernel command line: root=/dev/hda1 ro vga=791 PID hash table entries: 2048 (order: 11, 32768 bytes) Detected 868.755 MHz processor. Using tsc for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 514100k/524224k available (3016k kernel code, 9636k reserved, 1162k data, 240k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 1740.70 BogoMIPS (lpj=3481416) Mount-cache hash table entries: 512 CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU serial number disabled. CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel Pentium III (Coppermine) stepping 0a Booting processor 1/1 eip 2000 Initializing CPU#1 Calibrating delay using timer specific routine.. 1737.41 BogoMIPS (lpj=3474821) CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU serial number disabled. CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel Pentium III (Coppermine) stepping 0a Total of 2 processors activated (3478.11 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfb4a0, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) mtrr: your CPUs had inconsistent variable MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. ACPI: Subsystem revision 20050408 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 11 *12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 11 devices PnPBIOS: Disabled by ACPI PNP SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report audit: initializing netlink socket (disabled) audit(1117565920.316:1): initialized inotify device minor=63 Installing knfsd (copyright (C) 1996 okir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org). NTFS driver 2.1.23-WIP [Flags: R/O]. PCI: Enabling Via external APIC routing vesafb: framebuffer at 0xd9000000, mapped to 0xe0880000, using 3072k, total 4096k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: protected mode interface info at c7d6:0000 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found lp: driver loaded but no devices found Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected VIA Apollo Pro 133 chipset agpgart: AGP aperture is 64M @ 0xd0000000 cn_fork is registered PNP: PS/2 controller doesn't have AUX irq; using default 0xc PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A parport_pc: VIA 686A/8231 detected parport_pc: probing current configuration parport_pc: Current parallel port base: 0x378 parport0: PC-style at 0x378, irq 7 [PCSPP(,...)] lp0: using parport0 (interrupt-driven). parport_pc: VIA parallel port: io=0x378, irq=7 io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) eepro100.c:v1.09j-t 9/29/99 Donald Becker http://www.scyld.com/network/eepro100.html eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin and others ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 18 (level, low) -> IRQ 16 eth0: 0000:00:0f.0, 00:08:9B:09:A9:4B, IRQ 16. Board assembly 729757-006, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 17 (level, low) -> IRQ 17 eth1: 0000:00:10.0, 00:08:9B:09:A9:4C, IRQ 17. Board assembly 729757-006, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:07.1 PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1 ide0: BM-DMA at 0xcc00-0xcc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: Maxtor 6B160P0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: PLEXTOR DVDR PX-716A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: max request size: 1024KiB hda: 320173056 sectors (163928 MB) w/8192KiB Cache, CHS=19929/255/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 > ide-disk: probe of 1.0 failed with error 1 hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.20 usbmon: debugs is not available ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 16 ohci_hcd 0000:00:13.0: OPTi Inc. 82C861 ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:13.0: irq 16, io mem 0xd9a02000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 18 PCI: Via IRQ fixup for 0000:00:07.2, from 12 to 2 uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:07.2: irq 18, io base 0x0000b000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 18 PCI: Via IRQ fixup for 0000:00:07.3, from 12 to 2 uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:07.3: irq 18, io base 0x0000b400 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 1-1: new low speed USB device using ohci_hcd and address 2 usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.0-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.01:USB HID core driver mice: PS/2 mouse device common for all mice Advanced Linux Sound Architecture Driver Version 1.0.9rc3 (Thu Mar 24 10:33:39 2005 UTC). ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 ACPI: PCI Interrupt 0000:00:07.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 19 PCI: Via IRQ fixup for 0000:00:07.5, from 11 to 3 PCI: Setting latency timer of device 0000:00:07.5 to 64 input: AT Translated Set 2 keyboard on isa0060/serio0 ALSA device list: #0: VIA 82C686A/B rev50 with ALC200,200P at 0xb800, irq 19 NET: Registered protocol family 2 IP: routing cache hash table of 2048 buckets, 32Kbytes TCP established hash table entries: 32768 (order: 7, 524288 bytes) TCP bind hash table entries: 32768 (order: 6, 393216 bytes) TCP: Hash tables configured (established 32768 bind 32768) ip_conntrack version 2.1 (4095 buckets, 32760 max) - 212 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.2: Stephen Frost . http://snowman.net/projects/ipt_recent/ arp_tables: (C) 2002 David S. Miller NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 5 Starting balanced_irq EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. kjournald starting. Commit interval 5 seconds Freeing unused kernel memory: 240k freed Adding 1510068k swap on /dev/hda7. Priority:-1 extents:1 EXT3 FS on hda1, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on hda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. [drm] Initialized drm 1.0.0 20040925 ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 19 (level, low) -> IRQ 20 [drm] Initialized radeon 1.16.0 20050311 on minor 0: ATI Technologies Inc RV280 [Radeon 9200 PRO] [drm] Loading R200 Microcode --=-w0/JahAwSBj7j61Llyv2 Content-Disposition: attachment; filename=interrupts_after_sound.txt Content-Type: text/plain; name=interrupts_after_sound.txt; charset=iso-8859-1 Content-Transfer-Encoding: 7Bit CPU0 CPU1 0: 33929 28893 IO-APIC-edge timer 1: 383 232 IO-APIC-edge i8042 7: 0 0 IO-APIC-edge parport0 9: 0 0 IO-APIC-level acpi 14: 5687 3339 IO-APIC-edge ide0 15: 1012 1065 IO-APIC-edge ide1 16: 12155 13 IO-APIC-level ohci_hcd:usb1, eth0 18: 1650 916 IO-APIC-level uhci_hcd:usb2, uhci_hcd:usb3 19: 11948 9029 IO-APIC-level VIA686A 20: 199254 746 IO-APIC-level radeon@PCI:2:7:0 NMI: 0 0 LOC: 62702 62701 ERR: 0 MIS: 0 --=-w0/JahAwSBj7j61Llyv2 Content-Disposition: attachment; filename=lspci.txt Content-Type: text/plain; name=lspci.txt; charset=iso-8859-1 Content-Transfer-Encoding: 7Bit 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c4) Flags: bus master, medium devsel, latency 8 Memory at d0000000 (32-bit, prefetchable) [size=64M] Capabilities: 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] (prog-if 00 [Normal decode]) Flags: bus master, 66MHz, medium devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: d7000000-d8ffffff Prefetchable memory behind bridge: d9000000-d97fffff Capabilities: 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge Flags: bus master, stepping, medium devsel, latency 0 Capabilities: 0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235 PIPC Bus Master IDE Flags: bus master, medium devsel, latency 32 I/O ports at cc00 [size=16] Capabilities: 0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1a) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller Flags: bus master, medium devsel, latency 32, IRQ 18 I/O ports at b000 [size=32] Capabilities: 0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 1a) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller Flags: bus master, medium devsel, latency 32, IRQ 18 I/O ports at b400 [size=32] Capabilities: 0000:00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) Subsystem: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] Flags: medium devsel, IRQ 9 Capabilities: 0000:00:07.5 Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 50) Subsystem: VIA Technologies, Inc. VT82C686 AC97 Audio Controller Flags: medium devsel, IRQ 19 I/O ports at b800 [size=256] I/O ports at bc00 [size=4] I/O ports at c000 [size=4] Capabilities: 0000:00:0f.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08) Subsystem: Intel Corp. EtherExpress PRO/100+ Server Adapter (PILA8470B) Flags: bus master, medium devsel, latency 32, IRQ 16 Memory at d9a01000 (32-bit, non-prefetchable) [size=4K] I/O ports at c400 [size=64] Memory at d9800000 (32-bit, non-prefetchable) [size=1M] Capabilities: 0000:00:10.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08) Subsystem: Intel Corp. EtherExpress PRO/100+ Server Adapter (PILA8470B) Flags: bus master, medium devsel, latency 32, IRQ 17 Memory at d9a00000 (32-bit, non-prefetchable) [size=4K] I/O ports at c800 [size=64] Memory at d9900000 (32-bit, non-prefetchable) [size=1M] Capabilities: 0000:00:11.0 PCI bridge: Texas Instruments PCI2031 (rev 01) (prog-if 00 [Normal decode]) Flags: bus master, medium devsel, latency 32 Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 I/O behind bridge: 0000a000-0000afff Memory behind bridge: d5000000-d6ffffff Prefetchable memory behind bridge: c0000000-cfffffff Capabilities: 0000:00:13.0 USB Controller: OPTi Inc. 82C861 (rev 10) (prog-if 10 [OHCI]) Subsystem: OPTi Inc. 82C861 Flags: bus master, medium devsel, latency 32, IRQ 16 Memory at d9a02000 (32-bit, non-prefetchable) [size=4K] 0000:01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 86C326 5598/6326 (rev 0b) (prog-if 00 [VGA]) Subsystem: Yuan Yuan Enterprise Co., Ltd.: Unknown device 6326 Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 255 Memory at d9000000 (32-bit, prefetchable) [size=8M] Memory at d8000000 (32-bit, non-prefetchable) [size=64K] I/O ports at 9000 [size=128] Capabilities: 0000:02:07.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01) (prog-if 00 [VGA]) Subsystem: Hightech Information System Ltd.: Unknown device 2020 Flags: bus master, medium devsel, latency 32, IRQ 20 Memory at c0000000 (32-bit, prefetchable) [size=128M] I/O ports at a000 [disabled] [size=256] Memory at d6000000 (32-bit, non-prefetchable) [size=64K] Capabilities: 0000:02:07.1 Display controller: ATI Technologies Inc: Unknown device 5940 (rev 01) Subsystem: Hightech Information System Ltd.: Unknown device 2021 Flags: bus master, medium devsel, latency 32 Memory at c8000000 (32-bit, prefetchable) [size=128M] Memory at d6010000 (32-bit, non-prefetchable) [size=64K] Capabilities: --=-w0/JahAwSBj7j61Llyv2 Content-Disposition: attachment; filename=syslog Content-Type: text/plain; name=syslog; charset=iso-8859-1 Content-Transfer-Encoding: Quoted-Printable May 31 20:58:58 localhost syslogd 1.4.1#16: restart. May 31 20:58:58 localhost udev[3315]: removing device node '/dev/vcsa1' May 31 20:58:58 localhost udev[3320]: creating device node '/dev/vcs1' May 31 20:58:58 localhost udev[3328]: creating device node '/dev/vcsa1' May 31 20:58:58 localhost kernel: klogd 1.4.1#16, log source =3D /proc/km= sg started. May 31 20:58:58 localhost kernel: Cannot find map file. May 31 20:58:58 localhost kernel: No module symbols loaded - kernel modul= es not enabled.=20 May 31 20:58:58 localhost kernel: Linux version 2.6.12-rc5-mm1 (hannes@li= nux-server) (gcc-Version 3.3.5 (Debian 1:3.3.5-12)) #2 SMP Tue May 31 19:= 57:32 CEST 2005 May 31 20:58:58 localhost kernel: BIOS-provided physical RAM map: May 31 20:58:58 localhost kernel: BIOS-e820: 0000000000000000 - 00000000= 000a0000 (usable) May 31 20:58:58 localhost kernel: BIOS-e820: 00000000000f0000 - 00000000= 00100000 (reserved) May 31 20:58:58 localhost kernel: BIOS-e820: 0000000000100000 - 00000000= 1fff0000 (usable) May 31 20:58:58 localhost kernel: BIOS-e820: 000000001fff0000 - 00000000= 1fff3000 (ACPI NVS) May 31 20:58:58 localhost kernel: BIOS-e820: 000000001fff3000 - 00000000= 20000000 (ACPI data) May 31 20:58:58 localhost kernel: BIOS-e820: 00000000fec00000 - 00000001= 00000000 (reserved) May 31 20:58:58 localhost kernel: 511MB LOWMEM available. May 31 20:58:58 localhost kernel: found SMP MP-table at 000f5290 May 31 20:58:58 localhost kernel: On node 0 totalpages: 131056 May 31 20:58:58 localhost kernel: DMA zone: 4096 pages, LIFO batch:1 May 31 20:58:58 localhost kernel: Normal zone: 126960 pages, LIFO batch= :31 May 31 20:58:58 localhost kernel: HighMem zone: 0 pages, LIFO batch:1 May 31 20:58:58 localhost kernel: DMI not present. May 31 20:58:58 localhost kernel: ACPI: RSDP (v000 VIA694 = ) @ 0x000f6590 May 31 20:58:58 localhost kernel: ACPI: RSDT (v001 VIA694 AWRDACPI 0x4230= 2e31 AWRD 0x00000000) @ 0x1fff3000 May 31 20:58:58 localhost kernel: ACPI: FADT (v001 VIA694 AWRDACPI 0x4230= 2e31 AWRD 0x00000000) @ 0x1fff3040 May 31 20:58:58 localhost kernel: ACPI: MADT (v001 VIA694 AWRDACPI 0x4230= 2e31 AWRD 0x00000000) @ 0x1fff57c0 May 31 20:58:58 localhost kernel: ACPI: DSDT (v001 VIA694 AWRDACPI 0x0000= 1000 MSFT 0x0100000c) @ 0x00000000 May 31 20:58:58 localhost kernel: ACPI: Local APIC address 0xfee00000 May 31 20:58:58 localhost kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x0= 0] enabled) May 31 20:58:58 localhost kernel: Processor #0 6:8 APIC version 17 May 31 20:58:58 localhost kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x0= 1] enabled) May 31 20:58:58 localhost kernel: Processor #1 6:8 APIC version 17 May 31 20:58:58 localhost kernel: ACPI: IOAPIC (id[0x02] address[0xfec000= 00] gsi_base[0]) May 31 20:58:58 localhost kernel: IOAPIC[0]: apic_id 2, version 17, addre= ss 0xfec00000, GSI 0-23 May 31 20:58:58 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 glob= al_irq 2 dfl dfl) May 31 20:58:58 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 glob= al_irq 9 dfl dfl) May 31 20:58:58 localhost kernel: ACPI: IRQ0 used by override. May 31 20:58:58 localhost kernel: ACPI: IRQ2 used by override. May 31 20:58:58 localhost kernel: ACPI: IRQ9 used by override. May 31 20:58:58 localhost kernel: Enabling APIC mode: Flat. Using 1 I/O= APICs May 31 20:58:58 localhost kernel: Using ACPI (MADT) for SMP configuration= information May 31 20:58:58 localhost kernel: Allocating PCI resources starting at 20= 000000 (gap: 20000000:dec00000) May 31 20:58:58 localhost kernel: Built 1 zonelists May 31 20:58:58 localhost kernel: mapped APIC to ffffd000 (fee00000) May 31 20:58:58 localhost kernel: mapped IOAPIC to ffffc000 (fec00000) May 31 20:58:58 localhost kernel: Initializing CPU#0 May 31 20:58:58 localhost kernel: Kernel command line: root=3D/dev/hda1 r= o vga=3D791 May 31 20:58:58 localhost kernel: PID hash table entries: 2048 (order: 11= , 32768 bytes) May 31 20:58:58 localhost kernel: Detected 868.755 MHz processor. May 31 20:58:58 localhost kernel: Using tsc for high-res timesource May 31 20:58:58 localhost kernel: Console: colour dummy device 80x25 May 31 20:58:58 localhost kernel: Dentry cache hash table entries: 131072= (order: 7, 524288 bytes) May 31 20:58:58 localhost kernel: Inode-cache hash table entries: 65536 (= order: 6, 262144 bytes) May 31 20:58:58 localhost kernel: Memory: 514100k/524224k available (3016= k kernel code, 9636k reserved, 1162k data, 240k init, 0k highmem) May 31 20:58:58 localhost kernel: Checking if this processor honours the = WP bit even in supervisor mode... Ok. May 31 20:58:58 localhost kernel: Calibrating delay using timer specific = routine.. 1740.70 BogoMIPS (lpj=3D3481416) May 31 20:58:58 localhost kernel: Mount-cache hash table entries: 512 May 31 20:58:58 localhost kernel: CPU: After generic identify, caps: 0387= fbff 00000000 00000000 00000000 00000000 00000000 00000000 May 31 20:58:58 localhost kernel: CPU: After vendor identify, caps: 0387f= bff 00000000 00000000 00000000 00000000 00000000 00000000 May 31 20:58:58 localhost kernel: CPU: L1 I cache: 16K, L1 D cache: 16K May 31 20:58:58 localhost kernel: CPU: L2 cache: 256K May 31 20:58:58 localhost kernel: CPU serial number disabled. May 31 20:58:58 localhost kernel: CPU: After all inits, caps: 0383fbff 00= 000000 00000000 00000040 00000000 00000000 00000000 May 31 20:58:58 localhost kernel: Intel machine check architecture suppor= ted. May 31 20:58:58 localhost kernel: Intel machine check reporting enabled o= n CPU#0. May 31 20:58:58 localhost kernel: Enabling fast FPU save and restore... d= one. May 31 20:58:58 localhost kernel: Enabling unmasked SIMD FPU exception su= pport... done. May 31 20:58:58 localhost kernel: Checking 'hlt' instruction... OK. May 31 20:58:58 localhost kernel: CPU0: Intel Pentium III (Coppermine) st= epping 0a May 31 20:58:58 localhost kernel: Booting processor 1/1 eip 2000 May 31 20:58:58 localhost kernel: Initializing CPU#1 May 31 20:58:58 localhost kernel: Calibrating delay using timer specific = routine.. 1737.41 BogoMIPS (lpj=3D3474821) May 31 20:58:58 localhost kernel: CPU: After generic identify, caps: 0387= fbff 00000000 00000000 00000000 00000000 00000000 00000000 May 31 20:58:58 localhost kernel: CPU: After vendor identify, caps: 0387f= bff 00000000 00000000 00000000 00000000 00000000 00000000 May 31 20:58:58 localhost kernel: CPU: L1 I cache: 16K, L1 D cache: 16K May 31 20:58:58 localhost kernel: CPU: L2 cache: 256K May 31 20:58:58 localhost kernel: CPU serial number disabled. May 31 20:58:58 localhost kernel: CPU: After all inits, caps: 0383fbff 00= 000000 00000000 00000040 00000000 00000000 00000000 May 31 20:58:58 localhost kernel: Intel machine check architecture suppor= ted. May 31 20:58:58 localhost kernel: Intel machine check reporting enabled o= n CPU#1. May 31 20:58:58 localhost kernel: CPU1: Intel Pentium III (Coppermine) st= epping 0a May 31 20:58:58 localhost kernel: Total of 2 processors activated (3478.1= 1 BogoMIPS). May 31 20:58:58 localhost kernel: ENABLING IO-APIC IRQs May 31 20:58:58 localhost kernel: ..TIMER: vector=3D0x31 pin1=3D2 pin2=3D= -1 May 31 20:58:58 localhost kernel: checking TSC synchronization across 2 C= PUs: passed. May 31 20:58:58 localhost kernel: Brought up 2 CPUs May 31 20:58:58 localhost kernel: NET: Registered protocol family 16 May 31 20:58:58 localhost kernel: ACPI: bus type pci registered May 31 20:58:58 localhost kernel: PCI: PCI BIOS revision 2.10 entry at 0x= fb4a0, last bus=3D2 May 31 20:58:58 localhost kernel: PCI: Using configuration type 1 May 31 20:58:58 localhost kernel: mtrr: v2.0 (20020519) May 31 20:58:58 localhost kernel: mtrr: your CPUs had inconsistent variab= le MTRR settings May 31 20:58:58 localhost kernel: mtrr: probably your BIOS does not setup= all CPUs. May 31 20:58:58 localhost kernel: mtrr: corrected configuration. May 31 20:58:58 localhost kernel: ACPI: Subsystem revision 20050408 May 31 20:58:58 localhost kernel: ACPI: Interpreter enabled May 31 20:58:58 localhost kernel: ACPI: Using IOAPIC for interrupt routin= g May 31 20:58:58 localhost kernel: ACPI: PCI Root Bridge [PCI0] (0000:00) May 31 20:58:58 localhost kernel: PCI: Probing PCI hardware (bus 00) May 31 20:58:58 localhost kernel: ACPI: Assume root bridge [\_SB_.PCI0] s= egment is 0 May 31 20:58:58 localhost kernel: ACPI: Assume root bridge [\_SB_.PCI0] b= us is 0 May 31 20:58:58 localhost kernel: Boot video device is 0000:01:00.0 May 31 20:58:58 localhost kernel: ACPI: PCI Interrupt Routing Table [\_SB= _.PCI0._PRT] May 31 20:58:58 localhost kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 1= 3 4 5 6 7 10 11 12 14 15) *0, disabled. May 31 20:58:58 localhost kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 1= 3 4 5 6 7 *10 11 12 14 15) May 31 20:58:58 localhost kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 1= 3 4 5 6 7 10 *11 12 14 15) May 31 20:58:58 localhost kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 1= 3 4 5 6 7 10 11 *12 14 15) May 31 20:58:58 localhost kernel: Linux Plug and Play Support v0.97 (c) A= dam Belay May 31 20:58:58 localhost kernel: pnp: PnP ACPI init May 31 20:58:58 localhost kernel: pnp: PnP ACPI: found 11 devices May 31 20:58:58 localhost kernel: PnPBIOS: Disabled by ACPI PNP May 31 20:58:58 localhost kernel: SCSI subsystem initialized May 31 20:58:58 localhost kernel: usbcore: registered new driver usbfs May 31 20:58:58 localhost kernel: usbcore: registered new driver hub May 31 20:58:58 localhost kernel: PCI: Using ACPI for IRQ routing May 31 20:58:58 localhost kernel: PCI: If a device doesn't work, try "pci= =3Drouteirq". If it helps, post a report May 31 20:58:58 localhost kernel: audit: initializing netlink socket (dis= abled) May 31 20:58:58 localhost kernel: audit(1117565920.316:1): initialized May 31 20:58:58 localhost kernel: inotify device minor=3D63 May 31 20:58:58 localhost kernel: Installing knfsd (copyright (C) 1996 ok= ir-pn4DOG8n3UYbFoVRYvo4fw@public.gmane.org). May 31 20:58:58 localhost kernel: NTFS driver 2.1.23-WIP [Flags: R/O]. May 31 20:58:58 localhost kernel: PCI: Enabling Via external APIC routing May 31 20:58:58 localhost kernel: vesafb: framebuffer at 0xd9000000, mapp= ed to 0xe0880000, using 3072k, total 4096k May 31 20:58:58 localhost kernel: vesafb: mode is 1024x768x16, linelength= =3D2048, pages=3D1 May 31 20:58:58 localhost kernel: vesafb: protected mode interface info a= t c7d6:0000 May 31 20:58:58 localhost kernel: vesafb: scrolling: redraw May 31 20:58:58 localhost kernel: vesafb: Truecolor: size=3D0:5:6:5, shif= t=3D0:11:5:0 May 31 20:58:58 localhost kernel: Console: switching to colour frame buff= er device 128x48 May 31 20:58:58 localhost kernel: fb0: VESA VGA frame buffer device May 31 20:58:58 localhost kernel: isapnp: Scanning for PnP cards... May 31 20:58:58 localhost kernel: isapnp: No Plug & Play device found May 31 20:58:58 localhost kernel: lp: driver loaded but no devices found May 31 20:58:58 localhost kernel: Linux agpgart interface v0.101 (c) Dave= Jones May 31 20:58:58 localhost kernel: agpgart: Detected VIA Apollo Pro 133 ch= ipset May 31 20:58:58 localhost kernel: agpgart: AGP aperture is 64M @ 0xd00000= 00 May 31 20:58:58 localhost kernel: cn_fork is registered May 31 20:58:58 localhost kernel: PNP: PS/2 controller doesn't have AUX i= rq; using default 0xc May 31 20:58:58 localhost kernel: PNP: PS/2 Controller [PNP0303:PS2K] at = 0x60,0x64 irq 1,12 May 31 20:58:58 localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq = 12 May 31 20:58:58 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq = 1 May 31 20:58:58 localhost kernel: Serial: 8250/16550 driver $Revision: 1.= 90 $ 8 ports, IRQ sharing disabled May 31 20:58:58 localhost kernel: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 165= 50A May 31 20:58:58 localhost kernel: ttyS1 at I/O 0x2f8 (irq =3D 3) is a 165= 50A May 31 20:58:58 localhost kernel: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 165= 50A May 31 20:58:58 localhost kernel: ttyS1 at I/O 0x2f8 (irq =3D 3) is a 165= 50A May 31 20:58:58 localhost kernel: parport_pc: VIA 686A/8231 detected May 31 20:58:58 localhost kernel: parport_pc: probing current configurati= on May 31 20:58:58 localhost kernel: parport_pc: Current parallel port base:= 0x378 May 31 20:58:58 localhost kernel: parport0: PC-style at 0x378, irq 7 [PCS= PP(,...)] May 31 20:58:58 localhost kernel: lp0: using parport0 (interrupt-driven). May 31 20:58:58 localhost kernel: parport_pc: VIA parallel port: io=3D0x3= 78, irq=3D7 May 31 20:58:58 localhost kernel: io scheduler noop registered May 31 20:58:58 localhost kernel: io scheduler anticipatory registered May 31 20:58:58 localhost kernel: io scheduler deadline registered May 31 20:58:58 localhost kernel: io scheduler cfq registered May 31 20:58:58 localhost kernel: Floppy drive(s): fd0 is 1.44M May 31 20:58:58 localhost kernel: FDC 0 is a post-1991 82077 May 31 20:58:58 localhost kernel: RAMDISK driver initialized: 16 RAM disk= s of 4096K size 1024 blocksize May 31 20:58:58 localhost kernel: loop: loaded (max 8 devices) May 31 20:58:58 localhost kernel: eepro100.c:v1.09j-t 9/29/99 Donald Beck= er http://www.scyld.com/network/eepro100.html May 31 20:58:58 localhost kernel: eepro100.c: $Revision: 1.36 $ 2000/11/1= 7 Modified by Andrey V. Savochkin and others May 31 20:58:58 localhost kernel: ACPI: PCI Interrupt 0000:00:0f.0[A] -> = GSI 18 (level, low) -> IRQ 16 May 31 20:58:58 localhost kernel: eth0: 0000:00:0f.0, 00:08:9B:09:A9:4B, = IRQ 16. May 31 20:58:58 localhost kernel: Board assembly 729757-006, Physical c= onnectors present: RJ45 May 31 20:58:58 localhost kernel: Primary interface chip i82555 PHY #1. May 31 20:58:58 localhost kernel: General self-test: passed. May 31 20:58:58 localhost kernel: Serial sub-system self-test: passed. May 31 20:58:58 localhost kernel: Internal registers self-test: passed. May 31 20:58:58 localhost kernel: ROM checksum self-test: passed (0x04f= 4518b). May 31 20:58:58 localhost kernel: ACPI: PCI Interrupt 0000:00:10.0[A] -> = GSI 17 (level, low) -> IRQ 17 May 31 20:58:58 localhost kernel: eth1: 0000:00:10.0, 00:08:9B:09:A9:4C, = IRQ 17. May 31 20:58:58 localhost kernel: Board assembly 729757-006, Physical c= onnectors present: RJ45 May 31 20:58:58 localhost kernel: Primary interface chip i82555 PHY #1. May 31 20:58:58 localhost kernel: General self-test: passed. May 31 20:58:58 localhost kernel: Serial sub-system self-test: passed. May 31 20:58:58 localhost kernel: Internal registers self-test: passed. May 31 20:58:58 localhost kernel: ROM checksum self-test: passed (0x04f= 4518b). May 31 20:58:58 localhost kernel: Uniform Multi-Platform E-IDE driver Rev= ision: 7.00alpha2 May 31 20:58:58 localhost kernel: ide: Assuming 33MHz system bus speed fo= r PIO modes; override with idebus=3Dxx May 31 20:58:58 localhost kernel: VP_IDE: IDE controller at PCI slot 0000= :00:07.1 May 31 20:58:58 localhost kernel: PCI: Via IRQ fixup for 0000:00:07.1, fr= om 255 to 0 May 31 20:58:58 localhost kernel: VP_IDE: chipset revision 6 May 31 20:58:58 localhost kernel: VP_IDE: not 100%% native mode: will pro= be irqs later May 31 20:58:58 localhost kernel: VP_IDE: VIA vt82c686b (rev 40) IDE UDMA= 100 controller on pci0000:00:07.1 May 31 20:58:58 localhost kernel: ide0: BM-DMA at 0xcc00-0xcc07, BIOS= settings: hda:DMA, hdb:pio May 31 20:58:58 localhost kernel: ide1: BM-DMA at 0xcc08-0xcc0f, BIOS= settings: hdc:DMA, hdd:pio May 31 20:58:58 localhost kernel: Probing IDE interface ide0... May 31 20:58:58 localhost kernel: hda: Maxtor 6B160P0, ATA DISK drive May 31 20:58:58 localhost kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 May 31 20:58:58 localhost kernel: Probing IDE interface ide1... May 31 20:58:58 localhost kernel: hdc: PLEXTOR DVDR PX-716A, ATAPI CD/DVD= -ROM drive May 31 20:58:58 localhost kernel: ide1 at 0x170-0x177,0x376 on irq 15 May 31 20:58:58 localhost kernel: Probing IDE interface ide2... May 31 20:58:58 localhost kernel: Probing IDE interface ide3... May 31 20:58:58 localhost kernel: Probing IDE interface ide4... May 31 20:58:58 localhost kernel: Probing IDE interface ide5... May 31 20:58:58 localhost kernel: hda: max request size: 1024KiB May 31 20:58:58 localhost kernel: hda: 320173056 sectors (163928 MB) w/81= 92KiB Cache, CHS=3D19929/255/63, UDMA(100) May 31 20:58:58 localhost kernel: hda: cache flushes supported May 31 20:58:58 localhost kernel: hda: hda1 hda2 < hda5 hda6 hda7 hda8 h= da9 > May 31 20:58:58 localhost kernel: ide-disk: probe of 1.0 failed with erro= r 1 May 31 20:58:58 localhost kernel: hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW dr= ive, 8192kB Cache, UDMA(66) May 31 20:58:58 localhost kernel: Uniform CD-ROM driver Revision: 3.20 May 31 20:58:58 localhost kernel: usbmon: debugs is not available May 31 20:58:58 localhost kernel: ohci_hcd: 2005 April 22 USB 1.1 'Open' = Host Controller (OHCI) Driver (PCI) May 31 20:58:58 localhost kernel: ACPI: PCI Interrupt 0000:00:13.0[A] -> = GSI 18 (level, low) -> IRQ 16 May 31 20:58:58 localhost kernel: ohci_hcd 0000:00:13.0: OPTi Inc. 82C861 May 31 20:58:58 localhost kernel: ohci_hcd 0000:00:13.0: new USB bus regi= stered, assigned bus number 1 May 31 20:58:58 localhost kernel: ohci_hcd 0000:00:13.0: irq 16, io mem 0= xd9a02000 May 31 20:58:58 localhost kernel: hub 1-0:1.0: USB hub found May 31 20:58:58 localhost kernel: hub 1-0:1.0: 2 ports detected May 31 20:58:58 localhost kernel: USB Universal Host Controller Interface= driver v2.3 May 31 20:58:58 localhost kernel: ACPI: PCI Interrupt Link [LNKD] enabled= at IRQ 11 May 31 20:58:58 localhost kernel: ACPI: PCI Interrupt 0000:00:07.2[D] -> = Link [LNKD] -> GSI 11 (level, low) -> IRQ 18 May 31 20:58:58 localhost kernel: PCI: Via IRQ fixup for 0000:00:07.2, fr= om 12 to 2 May 31 20:58:58 localhost kernel: uhci_hcd 0000:00:07.2: VIA Technologies= , Inc. VT82xxxxx UHCI USB 1.1 Controller May 31 20:58:58 localhost kernel: uhci_hcd 0000:00:07.2: new USB bus regi= stered, assigned bus number 2 May 31 20:58:58 localhost kernel: uhci_hcd 0000:00:07.2: irq 18, io base = 0x0000b000 May 31 20:58:58 localhost kernel: hub 2-0:1.0: USB hub found May 31 20:58:58 localhost kernel: hub 2-0:1.0: 2 ports detected May 31 20:58:58 localhost kernel: ACPI: PCI Interrupt 0000:00:07.3[D] -> = Link [LNKD] -> GSI 11 (level, low) -> IRQ 18 May 31 20:58:58 localhost kernel: PCI: Via IRQ fixup for 0000:00:07.3, fr= om 12 to 2 May 31 20:58:58 localhost kernel: uhci_hcd 0000:00:07.3: VIA Technologies= , Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) May 31 20:58:58 localhost kernel: uhci_hcd 0000:00:07.3: new USB bus regi= stered, assigned bus number 3 May 31 20:58:58 localhost kernel: uhci_hcd 0000:00:07.3: irq 18, io base = 0x0000b400 May 31 20:58:58 localhost kernel: hub 3-0:1.0: USB hub found May 31 20:58:58 localhost kernel: hub 3-0:1.0: 2 ports detected May 31 20:58:58 localhost kernel: usb 1-1: new low speed USB device using= ohci_hcd and address 2 May 31 20:58:58 localhost kernel: usbcore: registered new driver usblp May 31 20:58:58 localhost kernel: drivers/usb/class/usblp.c: v0.13: USB P= rinter Device Class driver May 31 20:58:58 localhost kernel: Initializing USB Mass Storage driver... May 31 20:58:58 localhost kernel: usbcore: registered new driver usb-stor= age May 31 20:58:58 localhost kernel: USB Mass Storage support registered. May 31 20:58:58 localhost kernel: input: USB HID v1.10 Mouse [Logitech US= B-PS/2 Optical Mouse] on usb-0000:00:13.0-1 May 31 20:58:58 localhost kernel: usbcore: registered new driver usbhid May 31 20:58:58 localhost kernel: drivers/usb/input/hid-core.c: v2.01:USB= HID core driver May 31 20:58:58 localhost kernel: mice: PS/2 mouse device common for all = mice May 31 20:58:58 localhost kernel: Advanced Linux Sound Architecture Drive= r Version 1.0.9rc3 (Thu Mar 24 10:33:39 2005 UTC). May 31 20:58:58 localhost kernel: ACPI: PCI Interrupt Link [LNKC] enabled= at IRQ 10 May 31 20:58:58 localhost kernel: ACPI: PCI Interrupt 0000:00:07.5[C] -> = Link [LNKC] -> GSI 10 (level, low) -> IRQ 19 May 31 20:58:58 localhost kernel: PCI: Via IRQ fixup for 0000:00:07.5, fr= om 11 to 3 May 31 20:58:58 localhost kernel: PCI: Setting latency timer of device 00= 00:00:07.5 to 64 May 31 20:58:58 localhost kernel: input: AT Translated Set 2 keyboard on = isa0060/serio0 May 31 20:58:58 localhost kernel: ALSA device list: May 31 20:58:58 localhost kernel: #0: VIA 82C686A/B rev50 with ALC200,2= 00P at 0xb800, irq 19 May 31 20:58:58 localhost kernel: NET: Registered protocol family 2 May 31 20:58:58 localhost kernel: IP: routing cache hash table of 2048 bu= ckets, 32Kbytes May 31 20:58:58 localhost kernel: TCP established hash table entries: 327= 68 (order: 7, 524288 bytes) May 31 20:58:58 localhost kernel: TCP bind hash table entries: 32768 (ord= er: 6, 393216 bytes) May 31 20:58:58 localhost kernel: TCP: Hash tables configured (establishe= d 32768 bind 32768) May 31 20:58:58 localhost kernel: ip_conntrack version 2.1 (4095 buckets,= 32760 max) - 212 bytes per conntrack May 31 20:58:58 localhost kernel: ip_tables: (C) 2000-2002 Netfilter core= team May 31 20:58:58 localhost kernel: ipt_recent v0.3.2: Stephen Frost . http://snowman.net/projects/ipt_recent/ May 31 20:58:58 localhost kernel: arp_tables: (C) 2002 David S. Miller May 31 20:58:58 localhost kernel: NET: Registered protocol family 1 May 31 20:58:58 localhost kernel: NET: Registered protocol family 17 May 31 20:58:58 localhost kernel: NET: Registered protocol family 5 May 31 20:58:58 localhost kernel: Starting balanced_irq May 31 20:58:58 localhost kernel: EXT3-fs: mounted filesystem with ordere= d data mode. May 31 20:58:58 localhost kernel: VFS: Mounted root (ext3 filesystem) rea= donly. May 31 20:58:58 localhost kernel: kjournald starting. Commit interval 5 = seconds May 31 20:58:58 localhost kernel: Freeing unused kernel memory: 240k free= d May 31 20:58:58 localhost kernel: Adding 1510068k swap on /dev/hda7. Pri= ority:-1 extents:1 May 31 20:58:58 localhost kernel: EXT3 FS on hda1, internal journal May 31 20:58:58 localhost kernel: kjournald starting. Commit interval 5 = seconds May 31 20:58:58 localhost kernel: EXT3 FS on hda9, internal journal May 31 20:58:58 localhost kernel: EXT3-fs: mounted filesystem with ordere= d data mode. May 31 20:58:58 localhost kernel: kjournald starting. Commit interval 5 = seconds May 31 20:58:58 localhost kernel: EXT3 FS on hda8, internal journal May 31 20:58:58 localhost kernel: EXT3-fs: mounted filesystem with ordere= d data mode. May 31 20:58:58 localhost kernel: kjournald starting. Commit interval 5 = seconds May 31 20:58:58 localhost kernel: EXT3 FS on hda5, internal journal May 31 20:58:58 localhost kernel: EXT3-fs: mounted filesystem with ordere= d data mode. May 31 20:58:58 localhost kernel: kjournald starting. Commit interval 5 = seconds May 31 20:58:58 localhost kernel: EXT3 FS on hda6, internal journal May 31 20:58:58 localhost kernel: EXT3-fs: mounted filesystem with ordere= d data mode. May 31 20:58:58 localhost udev[3343]: removing device node '/dev/vcsa1' May 31 20:58:58 localhost udev[3344]: removing device node '/dev/vcs1' May 31 20:58:58 localhost udev[3361]: creating device node '/dev/vcsa1' May 31 20:58:58 localhost udev[3367]: creating device node '/dev/vcs1' May 31 20:58:58 localhost udev[3378]: removing device node '/dev/vcs1' May 31 20:58:58 localhost udev[3386]: creating device node '/dev/vcs1' May 31 20:59:04 localhost mysqld_safe[3781]: started May 31 20:59:04 localhost mysqld[3785]: 050531 20:59:04 InnoDB: Started May 31 20:59:04 localhost mysqld[3785]: /usr/sbin/mysqld: ready for conne= ctions. May 31 20:59:04 localhost mysqld[3785]: Version: '4.0.24_Debian-10-log' = socket: '/var/run/mysqld/mysqld.sock' port: 3306 Source distribution May 31 20:59:05 localhost /etc/mysql/debian-start[3822]: Checking for cra= shed MySQL tables. May 31 20:59:05 localhost atalkd[3838]: restart (2.0.2) May 31 20:59:06 localhost atalkd[3838]: zip_getnetinfo for eth0 May 31 20:59:06 localhost smartd[3844]: smartd version 5.32 Copyright (C)= 2002-4 Bruce Allen=20 May 31 20:59:06 localhost smartd[3844]: Home page is http://smartmontools= .sourceforge.net/ =20 May 31 20:59:06 localhost smartd[3844]: Opened configuration file /etc/sm= artd.conf=20 May 31 20:59:06 localhost smartd[3844]: Configuration file /etc/smartd.co= nf parsed.=20 May 31 20:59:06 localhost smartd[3844]: Device: /dev/hda, opened=20 May 31 20:59:06 localhost smartd[3844]: Device: /dev/hda, not found in sm= artd database.=20 May 31 20:59:07 localhost smartd[3844]: Device: /dev/hda, enabled SMART A= ttribute Autosave.=20 May 31 20:59:07 localhost smartd[3844]: Device: /dev/hda, enabled SMART A= utomatic Offline Testing.=20 May 31 20:59:07 localhost smartd[3844]: Device: /dev/hda, is SMART capabl= e. Adding to "monitor" list.=20 May 31 20:59:07 localhost smartd[3844]: Monitoring 1 ATA and 0 SCSI devic= es=20 May 31 20:59:07 localhost smartd[3847]: smartd has fork()ed into backgrou= nd mode. New PID=3D3847.=20 May 31 20:59:07 localhost smartd[3847]: file /var/run/smartd.pid written = containing PID 3847=20 May 31 20:59:08 localhost rpc.statd[3923]: Version 1.0.6 Starting May 31 20:59:08 localhost rpc.statd[3923]: statd running as root. chown /= var/lib/nfs/sm to choose different user=20 May 31 20:59:09 localhost /usr/sbin/cron[3961]: (CRON) INFO (pidfile fd =3D= 3) May 31 20:59:09 localhost /usr/sbin/cron[3965]: (CRON) STARTUP (fork ok) May 31 20:59:09 localhost Xprt_64: No matching visual for __GLcontextMode= with visual class =3D 0 (32775), nplanes =3D 8 May 31 20:59:09 localhost /usr/sbin/cron[3965]: (CRON) INFO (Running @reb= oot jobs) May 31 20:59:11 localhost udev[3993]: creating device node '/dev/vcs2' May 31 20:59:11 localhost udev[3998]: creating device node '/dev/vcsa3' May 31 20:59:11 localhost udev[3996]: creating device node '/dev/vcs3' May 31 20:59:11 localhost udev[3994]: creating device node '/dev/vcsa2' May 31 20:59:11 localhost udev[4024]: creating device node '/dev/vcs4' May 31 20:59:11 localhost udev[4026]: creating device node '/dev/vcsa4' May 31 20:59:11 localhost udev[4031]: creating device node '/dev/vcs5' May 31 20:59:11 localhost udev[4033]: creating device node '/dev/vcsa5' May 31 20:59:11 localhost udev[4056]: creating device node '/dev/vcs7' May 31 20:59:11 localhost udev[4053]: creating device node '/dev/vcsa6' May 31 20:59:11 localhost udev[4038]: creating device node '/dev/vcs6' May 31 20:59:11 localhost udev[4077]: creating device node '/dev/vcsa7' May 31 20:59:11 localhost udev[4078]: removing device node '/dev/vcs5' May 31 20:59:11 localhost udev[4110]: removing device node '/dev/vcsa6' May 31 20:59:11 localhost udev[4112]: removing device node '/dev/vcsa4' May 31 20:59:11 localhost udev[4126]: removing device node '/dev/vcs6' May 31 20:59:11 localhost udev[4139]: removing device node '/dev/vcs3' May 31 20:59:11 localhost udev[4138]: removing device node '/dev/vcsa5' May 31 20:59:11 localhost udev[4149]: removing device node '/dev/vcs4' May 31 20:59:11 localhost udev[4167]: removing device node '/dev/vcsa3' May 31 20:59:11 localhost udev[4172]: creating device node '/dev/vcs6' May 31 20:59:11 localhost udev[4188]: creating device node '/dev/vcsa6' May 31 20:59:11 localhost udev[4187]: creating device node '/dev/vcsa4' May 31 20:59:11 localhost udev[4206]: creating device node '/dev/vcsa5' May 31 20:59:11 localhost udev[4203]: creating device node '/dev/vcs5' May 31 20:59:11 localhost udev[4205]: creating device node '/dev/vcsa3' May 31 20:59:11 localhost udev[4218]: creating device node '/dev/vcs4' May 31 20:59:11 localhost udev[4240]: creating device node '/dev/vcs3' May 31 20:59:16 localhost atalkd[3838]: zip_getnetinfo for eth0 May 31 20:59:26 localhost udev[4268]: creating device node '/dev/vcs8' May 31 20:59:26 localhost udev[4270]: creating device node '/dev/vcsa8' May 31 20:59:26 localhost udev[4290]: removing device node '/dev/vcsa8' May 31 20:59:26 localhost udev[4289]: removing device node '/dev/vcs8' May 31 20:59:26 localhost udev[4305]: creating device node '/dev/vcs8' May 31 20:59:26 localhost udev[4307]: creating device node '/dev/vcsa8' May 31 20:59:26 localhost atalkd[3838]: zip_getnetinfo for eth0 May 31 20:59:28 localhost hald[3415]: Timed out waiting for hotplug event= 898. Rebasing to 914 May 31 20:59:36 localhost atalkd[3838]: config for no router May 31 20:59:37 localhost atalkd[3838]: ready 0/0/0 May 31 20:59:39 localhost udev[4335]: creating device node '/dev/vcs9' May 31 20:59:39 localhost udev[4336]: creating device node '/dev/vcsa9' May 31 20:59:43 localhost kernel: [drm] Initialized drm 1.0.0 20040925 May 31 20:59:43 localhost kernel: ACPI: PCI Interrupt 0000:02:07.0[A] -> = GSI 19 (level, low) -> IRQ 20 May 31 20:59:43 localhost kernel: [drm] Initialized radeon 1.16.0 2005031= 1 on minor 0: ATI Technologies Inc RV280 [Radeon 9200 PRO] May 31 20:59:43 localhost udev[4383]: configured rule in '/etc/udev/rules= .d/udev.rules[37]' applied, 'card0' becomes 'dri/%k' May 31 20:59:43 localhost udev[4383]: creating device node '/dev/dri/card= 0' May 31 20:59:43 localhost kernel: [drm] Loading R200 Microcode May 31 20:59:49 localhost papd[4403]: restart (2.0.2) May 31 20:59:49 localhost papd[4403]: CUPS support enabled (1.1) May 31 20:59:49 localhost afpd[4405]: Registering CNID module [last] May 31 20:59:49 localhost afpd[4405]: Registering CNID module [cdb] May 31 20:59:49 localhost afpd[4405]: Registering CNID module [dbd] May 31 20:59:49 localhost afpd[4405]: Loading ConfigFile May 31 20:59:49 localhost afpd[4405]: Finished parsing Config File May 31 20:59:55 localhost afpd[4405]: localhost:AFPServer@* started on 65= 280.221:128 (2.0.2) May 31 20:59:55 localhost afpd[4405]: dsi_tcp: hostname 'linux-server' re= solves to loopback address May 31 20:59:55 localhost afpd[4405]: dsi_tcp: '192.168.1.2' on interface= 'eth0' will be used instead. May 31 20:59:55 localhost afpd[4405]: ASIP started on 192.168.1.2:548(5) = (2.0.2) May 31 20:59:55 localhost afpd[4405]: DSIConfigInit: Error registering af= p://192.168.1.2/?NAME=3Dlocalhost&ZONE=3D with SRVLOC May 31 20:59:55 localhost afpd[4405]: uam: loading (/usr/lib/netatalk/uam= s_dhx.so) May 31 20:59:55 localhost afpd[4405]: uam: uam not found (status=3D-1) May 31 20:59:55 localhost afpd[4405]: uam: loading (/usr/lib/netatalk/uam= s_clrtxt.so) May 31 20:59:55 localhost afpd[4405]: uam: uams_clrtxt.so loaded May 31 20:59:55 localhost afpd[4405]: uam: loading (/usr/lib/netatalk/uam= s_randnum.so) May 31 20:59:55 localhost afpd[4405]: uam: uam not found (status=3D-1) May 31 20:59:55 localhost afpd[4405]: uam: "Cleartxt Passwrd" available May 31 21:00:16 localhost gconfd (hannes-4484): (Version 2.8.1) wird gest= artet, Prozesskennung 4484, Benutzer =BBhannes=AB May 31 21:00:16 localhost gconfd (hannes-4484): Die Adresse =BBxml:readon= ly:/etc/gconf/gconf.xml.mandatory=AB wurde an der Position 0 zu einer nur= lesbaren Konfigurationsquelle aufgel=F6st May 31 21:00:16 localhost gconfd (hannes-4484): Die Adresse =BBxml:readwr= ite:/home/hannes/.gconf=AB wurde an der Position 1 zu einer schreibbaren = Konfigurationsquelle aufgel=F6st May 31 21:00:16 localhost gconfd (hannes-4484): Die Adresse =BBxml:readon= ly:/etc/gconf/gconf.xml.defaults=AB wurde an der Position 2 zu einer nur = lesbaren Konfigurationsquelle aufgel=F6st May 31 21:00:30 localhost gconfd (hannes-4484): Die Adresse =BBxml:readwr= ite:/home/hannes/.gconf=AB wurde an der Position 0 zu einer schreibbaren = Konfigurationsquelle aufgel=F6st >> I've started xmms May 31 21:01:28 localhost kernel: irq 20: nobody cared (try booting with = the "irqpoll" option. May 31 21:01:28 localhost kernel: [] __report_bad_irq+0x2a/0xa= 0 May 31 21:01:28 localhost kernel: [] handle_IRQ_event+0x30/0x7= 0 May 31 21:01:28 localhost kernel: [] note_interrupt+0x80/0xf0 May 31 21:01:28 localhost kernel: [] __do_IRQ+0x13c/0x140 May 31 21:01:28 localhost kernel: [] do_IRQ+0x19/0x30 May 31 21:01:28 localhost kernel: [] common_interrupt+0x1a/0x2= 0 May 31 21:01:28 localhost kernel: [] default_idle+0x0/0x30 May 31 21:01:28 localhost kernel: [] default_idle+0x23/0x30 May 31 21:01:28 localhost kernel: [] cpu_idle+0x80/0x90 May 31 21:01:28 localhost kernel: [] start_kernel+0x18d/0x1d0 May 31 21:01:28 localhost kernel: [] unknown_bootoption+0x0/0x= 1e0 May 31 21:01:28 localhost kernel: handlers: May 31 21:01:28 localhost kernel: [] (radeon_driver_irq_handler= +0x0/0xc0 [radeon]) May 31 21:01:28 localhost kernel: Disabling IRQ #20 >> I've stopped xmms May 31 21:02:01 localhost kernel: Unable to handle kernel paging request = at virtual address b587f060 May 31 21:02:01 localhost kernel: printing eip: May 31 21:02:01 localhost kernel: c03354d7 May 31 21:02:01 localhost kernel: *pde =3D 0c167067 May 31 21:02:01 localhost kernel: *pte =3D 00000000 May 31 21:02:01 localhost kernel: Oops: 0000 [#1] May 31 21:02:01 localhost kernel: PREEMPT SMP=20 May 31 21:02:01 localhost kernel: Modules linked in: radeon drm May 31 21:02:01 localhost kernel: CPU: 0 May 31 21:02:01 localhost kernel: EIP: 0060:[] Not tainte= d VLI May 31 21:02:01 localhost kernel: EFLAGS: 00210282 (2.6.12-rc5-mm1)=20 May 31 21:02:01 localhost kernel: EIP is at snd_pcm_mmap_data_close+0x7/0= x12 May 31 21:02:01 localhost kernel: eax: b587f000 ebx: c03354d0 ecx: dd= b03a20 edx: cc4897d0 May 31 21:02:01 localhost kernel: esi: dfb59ec4 edi: ddb03a20 ebp: cc= 489750 esp: cc1d3f40 May 31 21:02:01 localhost kernel: ds: 007b es: 007b ss: 0068 May 31 21:02:01 localhost kernel: Process xmms (pid: 4650, threadinfo=3Dc= c1d2000 task=3Dd518da30) May 31 21:02:01 localhost kernel: Stack: c01542b6 cc489750 cc489778 dfb59= e98 00000000 d878bcc0 cc489750 d878bcc0=20 May 31 21:02:01 localhost kernel: c0155c2f cc489750 cc489750 b587f= 000 b586f000 c015604b d878bcc0 cc489750=20 May 31 21:02:01 localhost kernel: cc4896f8 b586f000 b587f000 cc489= 6f8 d878bcc0 d878bcf0 00000002 cc1d2000=20 May 31 21:02:01 localhost kernel: Call Trace: May 31 21:02:01 localhost kernel: [] remove_vm_struct+0x96/0xa= 0 May 31 21:02:01 localhost kernel: [] unmap_vma_list+0x1f/0x30 May 31 21:02:01 localhost kernel: [] do_munmap+0x11b/0x150 May 31 21:02:01 localhost kernel: [] sys_munmap+0x45/0x70 May 31 21:02:01 localhost kernel: [] syscall_call+0x7/0xb May 31 21:02:01 localhost kernel: Code: 00 00 00 00 8b 44 24 04 8b 40 50 = 8b 40 60 f0 ff 80 a4 00 00 00 c3 8d b4 26 00 00 00 00 8d bc 27 00 00 00 0= 0 8b 44 24 04 8b 40 50 <8b> 40 60 f0 ff 88 a4 00 00 00 c3 51 52 e8 37 b8 = 0b 00 5a 59 e9=20 --=-w0/JahAwSBj7j61Llyv2-- ------------------------------------------------------- This SF.Net email is sponsored by Yahoo. Introducing Yahoo! Search Developer Network - Create apps using Yahoo! Search APIs Find out how you can build Yahoo! directly into your own Applications - visit http://developer.yahoo.net/?fr=offad-ysdn-ostg-q22005