public inbox for linux-acpi@vger.kernel.org
 help / color / mirror / Atom feed
From: Erik Slagter <erik-KW7PGP3XNp7a5EbDDlwbIw@public.gmane.org>
To: David Mathog <mathog-Mlb+9xX7RBA8OKIjkCRLjtKIQNXEaThN@public.gmane.org>
Cc: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: Re: Save power at idle onTyan S2466N-MPX, athcool, etc.
Date: Thu, 06 Oct 2005 10:09:44 +0200	[thread overview]
Message-ID: <1128586184.5964.22.camel@localhost.localdomain> (raw)
In-Reply-To: <E1ENCCr-0005rD-00-Mlb+9xX7RBA8OKIjkCRLjtKIQNXEaThN@public.gmane.org>

[-- Attachment #1: Type: text/plain, Size: 1882 bytes --]

On Wed, 2005-10-05 at 09:33 -0700, David Mathog wrote:

> > We had a discussion about exactly this a few weeks ago.
> > 
> > It boils down to: the AMD768 chipset can do C1/C2/C3 but not out of the
> > box using ACPI. First because ACPI processor support did not support
> > multiprocessor, now it does, but the ACPI parameters of this motherboard
> > prevent C2/C3 from being used by ACPI processor support.
> > 
> > So, out of the box you have C1, using the amd76x_pm you also have C2 and
> > optionally C3 support (although that completely screws up my sata
> > controller).
> 
> Got it, there are problems with ACPI and the S2466.  No big surprise
> there since this board has all sorts of oddball problems.  (No WOL
> etc.)
> 
> However, it sounded like you and others managed in the end
> obtain some power savings at idle.  Correct?  If so,
> could you or some other poster please explain how you accomplished
> that, stating in particular:
> 
> 1. relevant BIOS settings
> 2. minimum kernel required
> 3. any extra kernel patches required
> 4. any extra software (like athcool) required
> 
> The machines in question are single CPU beowulf nodes - they do
> have an S3 video card but it is used only when there are
> hardware problems and/or to change the BIOS.  So maybe
> once every two years.  There's no sound, TV card, video streams,
> or anything else like that.  These just sit around until a
> compute job comes through, then they grind like crazy for a while.
> It would be nice if they used less power while they were waiting.

Please search the mailing list archives for something like amd760,
amd768, amd76x_pm, smp, or simply my name. This has all been covered.

BTW I have had several stability issues with the board, so I am not
going to buy another Tyan board. My previous MSI board always worked
without any problem.

[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 2115 bytes --]

  parent reply	other threads:[~2005-10-06  8:09 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-10-05 16:33 Save power at idle onTyan S2466N-MPX, athcool, etc David Mathog
     [not found] ` <E1ENCCr-0005rD-00-Mlb+9xX7RBA8OKIjkCRLjtKIQNXEaThN@public.gmane.org>
2005-10-06  8:09   ` Erik Slagter [this message]
  -- strict thread matches above, loose matches on Subject: below --
2005-10-06 20:54 David Mathog
     [not found] ` <E1ENckb-0007Dh-00-Mlb+9xX7RBA8OKIjkCRLjtKIQNXEaThN@public.gmane.org>
2005-10-07  9:21   ` Erik Slagter
2005-10-02 18:29 David Mathog
2005-09-30 22:36 David Mathog
     [not found] ` <E1ELTUx-0001CZ-00-Mlb+9xX7RBA8OKIjkCRLjtKIQNXEaThN@public.gmane.org>
2005-10-05  9:56   ` Erik Slagter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1128586184.5964.22.camel@localhost.localdomain \
    --to=erik-kw7pgp3xnp7a5ebddlwbiw@public.gmane.org \
    --cc=acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
    --cc=mathog-Mlb+9xX7RBA8OKIjkCRLjtKIQNXEaThN@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox