ACPI on hp nx6125 doesn't update battery state

[Carsten Tschense <carsten-Bz3kcRWZgqLk1uMJSBkQmQ@public.gmane.org>]

Hi,
I bought a HP Compaq nx6125 2 days ago...
After booting the information in /proc/acpi/battery/C175/state update
regulary, but after a while they don't. I don't see any errors in
dmesg, /var/log/messages or /var/log/acpid.
Well, now the strange solution:
cat /proc/acpi/thermal_zone/TZ1/temperature
That's the thermal zone of the cpu. After doing this, the fan starts
blowing for a while, the cpu usage increases to 100% for about 2 seconds
(may vary), the systems repeats very slow.
Now the battery state updates, the system runs as normal. If you do a
cat /proc/acpi/thermal_zone/TZ1/temperature now, nothing happens, after
circa 5 minutes the same happens again.
The temperature looks correct all the time. viewing the temperature of
another thermal zone doesn't help...

That's a bit strange, isn't it? ;)
I hope you can help me... :) should I provide some debugging
information?

I'm running a 2.6.14 with gentoos patchset r2.

Bye,
Carsten



-------------------------------------------------------
This SF.Net email is sponsored by the JBoss Inc.  Get Certified Today
Register for a JBoss Training Course.  Free Certification Exam
for All Training Attendees Through End of 2005. For more info visit:
http://ads.osdn.com/?ad_id=7628&alloc_id=16845&op=click