public inbox for linux-acpi@vger.kernel.org
 help / color / mirror / Atom feed
From: Carsten Tschense <carsten-Bz3kcRWZgqLk1uMJSBkQmQ@public.gmane.org>
To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org,
	"Yu, Luming" <luming.yu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Subject: RE: ACPI on hp nx6125 doesn't update battery state
Date: Sun, 20 Nov 2005 00:52:18 +0100	[thread overview]
Message-ID: <1132444338.4120.12.camel@localhost> (raw)
In-Reply-To: <3ACA40606221794F80A5670F0AF15F84041AC21F@pdsmsx403>

Hi,
thanks for your help! :)
I booted with that this morning and let the notebook running for about 5
hours without looking after it. ... It seems to be a bit dangerous as
the notebook was damn hot, the fan wasn't running. A "cat temperature"
helped again. It said 58° for 2 minutes, that was defenatly wrong...

Ah, something to add: while writing this mail the fan was still running
at full speed (but it felt pretty cool), a "cat temperture" stopped
it ;) (is anything of that really usefull?)


Bye,
Carsten	

Am Samstag, den 19.11.2005, 10:23 +0800 schrieb Yu, Luming:
> Please try  boot option: ec_burst=1.
> 
> Thanks
> Luming 
> 
> >-----Original Message-----
> >From: acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org 
> >[mailto:acpi-devel-admin-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org] On Behalf Of 
> >Carsten Tschense
> >Sent: 2005年11月19日 6:22
> >To: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> >Subject: [ACPI] ACPI on hp nx6125 doesn't update battery state
> >
> >Hi,
> >I bought a HP Compaq nx6125 2 days ago...
> >After booting the information in /proc/acpi/battery/C175/state update
> >regulary, but after a while they don't. I don't see any errors in
> >dmesg, /var/log/messages or /var/log/acpid.
> >Well, now the strange solution:
> >cat /proc/acpi/thermal_zone/TZ1/temperature
> >That's the thermal zone of the cpu. After doing this, the fan starts
> >blowing for a while, the cpu usage increases to 100% for about 
> >2 seconds
> >(may vary), the systems repeats very slow.
> >Now the battery state updates, the system runs as normal. If you do a
> >cat /proc/acpi/thermal_zone/TZ1/temperature now, nothing happens, after
> >circa 5 minutes the same happens again.
> >The temperature looks correct all the time. viewing the temperature of
> >another thermal zone doesn't help...
> >
> >That's a bit strange, isn't it? ;)
> >I hope you can help me... :) should I provide some debugging
> >information?
> >
> >I'm running a 2.6.14 with gentoos patchset r2.
> >
> >Bye,
> >Carsten
> >
> >
> >
> >-------------------------------------------------------
> >This SF.Net email is sponsored by the JBoss Inc.  Get Certified Today
> >Register for a JBoss Training Course.  Free Certification Exam
> >for All Training Attendees Through End of 2005. For more info visit:
> >http://ads.osdn.com/?ad_id=7628&alloc_id=16845&op=click
> >_______________________________________________
> >Acpi-devel mailing list
> >Acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
> >https://lists.sourceforge.net/lists/listinfo/acpi-devel
> >
> 



-------------------------------------------------------
This SF.Net email is sponsored by the JBoss Inc.  Get Certified Today
Register for a JBoss Training Course.  Free Certification Exam
for All Training Attendees Through End of 2005. For more info visit:
http://ads.osdn.com/?ad_idv28&alloc_id\x16845&op=click

  reply	other threads:[~2005-11-19 23:52 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-11-19  2:23 ACPI on hp nx6125 doesn't update battery state Yu, Luming
2005-11-19 23:52 ` Carsten Tschense [this message]
2005-11-20  6:58   ` Ville Syrjälä
     [not found]     ` <20051120065846.GA19063-ORSVBvAovxo@public.gmane.org>
2005-11-20 10:13       ` Carsten Tschense
  -- strict thread matches above, loose matches on Subject: below --
2005-11-24 14:24 Yu, Luming
2005-11-24 17:01 ` Carsten Tschense
2005-11-21 13:21 Carsten Tschense
2005-11-18 22:22 Carsten Tschense

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1132444338.4120.12.camel@localhost \
    --to=carsten-bz3kcrwzgqlk1umjsbkqmq@public.gmane.org \
    --cc=acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
    --cc=luming.yu-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox