From: "Karl H. Beckers" <karl.h.beckers-hi6Y0CQ0nG0@public.gmane.org>
To: Christoph Galler <listen-TsugTnnrXQsdc6zLPptBHg@public.gmane.org>,
"Li,
Shaohua" <shaohua.li-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Cc: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
Subject: Re: 2.6.14.3 suspend/resume with SMP (HT)
Date: Mon, 19 Dec 2005 21:20:38 +0100 [thread overview]
Message-ID: <1135023638.18094.4.camel@localhost.localdomain> (raw)
In-Reply-To: <43A35C09.9040809-TsugTnnrXQsdc6zLPptBHg@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 547 bytes --]
Hi Christoph, Shaohua,
I do have hotplug_cpu configured into my kernel and disabling/enabling
CPUs works just as well in the situation where I did my suspend, s.
below.
Could it be the setting idle=halt is causing problems? I need that (or
max_cstate=1 to keep my CPU up to speed) ... otherwise I get boottimes
of an hour) found a patch that didn't help me, so I sticked to the boot
param. Haven't gotten round to testing without the param because it
would take a matter of hours to boot and suspend :S
Probable cause here?
Thanks,
Karl.
[-- Attachment #2: typescript --]
[-- Type: text/plain, Size: 4626 bytes --]
Script started on Mon Dec 19 21:04:00 2005
root@ubuntu:~# lsmod
Module Size Used by
wbsd 19080 0
mmc_core 25088 1 wbsd
floppy 63364 0
pcspkr 4072 0
rtc 9748 0
ohci1394 35508 0
tpm_atmel 6144 0
tpm_infineon 9872 0
tpm_nsc 7168 0
tpm 10656 3 tpm_atmel,tpm_infineon,tpm_nsc
shpchp 98180 0
pci_hotplug 29764 1 shpchp
intel_agp 23708 1
agpgart 35920 1 intel_agp
vfat 14336 0
fat 54428 1 vfat
dm_mod 59804 4
sbp2 24324 0
ieee1394 101720 2 ohci1394,sbp2
psmouse 38788 0
parport_pc 36548 1
lp 12420 0
parport 37960 2 parport_pc,lp
st 42144 0
scsi_mod 141320 2 sbp2,st
ext3 142088 4
jbd 63764 1 ext3
thermal 13576 0
processor 25924 1 thermal
fan 4868 0
usbhid 39136 0
8139too 29184 0
8139cp 22912 0
mii 5888 2 8139too,8139cp
usbcore 123520 2 usbhid
ide_cd 42628 0
cdrom 40480 1 ide_cd
ide_disk 19200 4
ide_generic 1536 0 [permanent]
piix 10884 0 [permanent]
generic 4868 0 [permanent]
ide_core 130128 5 ide_cd,ide_disk,ide_generic,piix,generic
unix 29584 2
root@ubuntu:~# ps -ef
UID PID PPID C STIME TTY TIME CMD
root 1 0 0 21:01 ? 00:00:01 init [S]
root 2 1 0 21:01 ? 00:00:00 [migration/0]
root 3 1 0 21:01 ? 00:00:00 [ksoftirqd/0]
root 4 1 0 21:01 ? 00:00:00 [migration/1]
root 5 1 0 21:01 ? 00:00:00 [ksoftirqd/1]
root 6 1 0 21:01 ? 00:00:00 [events/0]
root 7 1 0 21:01 ? 00:00:00 [events/1]
root 8 1 0 21:01 ? 00:00:00 [khelper]
root 9 1 0 21:01 ? 00:00:00 [kthread]
root 12 9 0 21:01 ? 00:00:00 [kacpid]
root 100 9 0 21:01 ? 00:00:00 [kblockd/0]
root 101 9 0 21:01 ? 00:00:00 [kblockd/1]
root 130 9 0 21:01 ? 00:00:00 [pdflush]
root 131 9 0 21:01 ? 00:00:00 [pdflush]
root 132 1 0 21:01 ? 00:00:00 [kswapd0]
root 133 9 0 21:01 ? 00:00:00 [aio/0]
root 134 9 0 21:01 ? 00:00:00 [aio/1]
root 721 9 0 21:01 ? 00:00:00 [kseriod]
root 759 1 0 21:01 ? 00:00:00 [kirqd]
root 4886 9 0 21:01 ? 00:00:00 [khubd]
root 9201 1 0 21:01 ? 00:00:00 [kjournald]
root 9557 1 0 21:01 ? 00:00:00 udevd --daemon
root 13607 1 0 21:01 ? 00:00:00 [khpsbpkt]
root 13927 1 0 21:01 ? 00:00:00 [kjournald]
root 13928 1 0 21:01 ? 00:00:00 [kjournald]
root 13929 1 0 21:01 ? 00:00:00 [kjournald]
root 14207 1 0 21:01 ? 00:00:00 [shpchpd_event]
root 15061 1 0 21:01 ? 00:00:00 [knodemgrd_0]
root 16185 1 0 21:01 tty1 00:00:00 init [S]
root 16190 16185 0 21:01 tty1 00:00:00 bash
root 17165 16190 0 21:04 tty1 00:00:00 script
root 17166 17165 0 21:04 tty1 00:00:00 script
root 17167 17166 0 21:04 ttyp0 00:00:00 bash -i
root 17177 17167 0 21:04 ttyp0 00:00:00 ps -ef
root@ubuntu:~# echo "platform"\b \b\b \b\b \b\b \b\b \b\b \b\b \b\b \b\b \b\b \b\b \b\b \b\b \b\b \b\b \becho 0 > /sys/devices/system/cpu/cpu\a
cpu0/ cpu1/
root@ubuntu:~# echo 0 > /sys/devices/system/cpu/cpu1/online
root@ubuntu:~# echo 0 > /sys/devices/system/cpu/cpu1/online\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b\b^[[1P^[[1@1
root@ubuntu:~# echo /sys/devices/system/cpu/cp\au1/\b \b\b \b?/online
/sys/devices/system/cpu/cpu0/online /sys/devices/system/cpu/cpu1/online
root@ubuntu:~# echo /sys/devices/system/cpu/cpu?/online\rroot@ubuntu:~# echo\b^[[1P\b^[[1P\b^[[1P\b^[[1P^[[1@c^[[1@a^[[1@t
1
1
root@ubuntu:~# gre\b \b\b \b\b \b\ag\b \bzgrep -i ht\b \botplug_cpu /proc/config.gz
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_HOTPLUG_CPU=y
root@ubuntu:~# exit
Script done on Mon Dec 19 21:06:43 2005
next prev parent reply other threads:[~2005-12-19 20:20 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-12-16 2:12 2.6.14.3 suspend/resume with SMP (HT) Li, Shaohua
2005-12-16 20:17 ` Karl H. Beckers
[not found] ` <1134764243.27534.4.camel-bi+AKbBUZKY6gyzm1THtWbp2dZbC/Bob@public.gmane.org>
2005-12-17 0:30 ` Christoph Galler
[not found] ` <43A35C09.9040809-TsugTnnrXQsdc6zLPptBHg@public.gmane.org>
2005-12-19 20:20 ` Karl H. Beckers [this message]
2005-12-19 20:34 ` Karl H. Beckers
2005-12-19 19:57 ` Karl H. Beckers
-- strict thread matches above, loose matches on Subject: below --
2005-12-20 2:56 Li, Shaohua
2005-12-15 17:11 Karl H. Beckers
[not found] ` <6073.193.141.92.4.1134666664.squirrel-M7EjoFQNY9cJ6rt9v30lug@public.gmane.org>
2005-12-21 9:58 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1135023638.18094.4.camel@localhost.localdomain \
--to=karl.h.beckers-hi6y0cq0ng0@public.gmane.org \
--cc=acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org \
--cc=listen-TsugTnnrXQsdc6zLPptBHg@public.gmane.org \
--cc=shaohua.li-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox