From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sergio Monteiro Basto Subject: Re: ACPI screwing up USB ehci_hcd with kernel 2.6.16.18 Date: Mon, 29 May 2006 13:11:48 +0100 Message-ID: <1148904708.2916.1.camel@localhost.localdomain> References: <200605282150.24428.surgpub@telkomsa.net> Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: Received: from relay6.ptmail.sapo.pt ([212.55.154.26]:41684 "HELO sapo.pt") by vger.kernel.org with SMTP id S1750733AbWE2MLw (ORCPT ); Mon, 29 May 2006 08:11:52 -0400 In-Reply-To: <200605282150.24428.surgpub@telkomsa.net> Sender: linux-acpi-owner@vger.kernel.org List-Id: linux-acpi@vger.kernel.org To: Paul Surgeon Cc: linux-acpi@vger.kernel.org and before ? can you send lspci -n ? On Sun, 2006-05-28 at 21:50 +0200, Paul Surgeon wrote: > I had a problem with ACPI IRQ routing messing up the USB ehci module. > I have to disable the irq routing with apci=noirq in the bootloader config in > order to use the ehci module. > > Failing to do so results in : > usb 5-1: new high speed USB device using ehci_hcd and address 3 > ehci_hcd 0000:00:10.4: Unlink after no-IRQ? Controller is probably using the > wrong IRQ. > > System : > Kernel 2.6.16.18 > Chipset VIA KT400A > > Regards > Paul > - > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html