From: Peter Clifton <pcjc2@cam.ac.uk>
To: Luming Yu <luming.yu@gmail.com>
Cc: trenn@suse.de, Bjorn Helgaas <bjorn.helgaas@hp.com>,
emisca <emisca.ml@gmail.com>,
Alexey Starikovskiy <alexey.y.starikovskiy@linux.intel.com>,
Pieter De Wit <Pieter.DeWit@vodacom.co.za>,
linux-acpi@vger.kernel.org, dtor@mail.ru
Subject: Re: Fan speeds on HP nc6400 and nc8430
Date: Tue, 06 Feb 2007 15:04:56 +0000 [thread overview]
Message-ID: <1170774296.5785.6.camel@localhost> (raw)
In-Reply-To: <3877989d0702060358w101d809ar3b8c8900a8dba7c9@mail.gmail.com>
On Tue, 2007-02-06 at 19:58 +0800, Luming Yu wrote:
> I managed to get a HP NX 6330 laptop to test HP laptop related issues
> discussed here.
> But the bug http://bugzilla.kernel.org/show_bug.cgi?id=7813 seems to
> be NOT reproducible on my NX6330. This fact prompt if there are any
> essential difference between NX6330 and NC6400. The BIOS of my NX6330
> even declares itself is NC6330.
I'm not clear on HP's numbering scheme. It doesn't make any obvious
sense to me!
Mine is a nc6320 which exhibits the above bug. The DSDT lists as nc6340
though. That is an Intel Core Duo, with the following lspci output:
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and
945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile
945GM/GMS/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/940GML
Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 (rev 01)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 3 (rev 01)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 4 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
#1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
#2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
#3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
#4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE
Controller (rev 01)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family)
Serial ATA Storage Controller AHCI (rev 01)
02:06.0 CardBus bridge: Texas Instruments Unknown device 8039
02:06.1 FireWire (IEEE 1394): Texas Instruments Unknown device 803a
02:06.2 Mass storage controller: Texas Instruments Unknown device 803b
02:06.3 Class 0805: Texas Instruments Unknown device 803c
02:0e.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788
Gigabit Ethernet (rev 03)
08:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG
Network Connection (rev 02)
Peter Clifton
next prev parent reply other threads:[~2007-02-06 15:07 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-01-19 11:29 Fan speeds on HP nc6400 and nc8430 Pieter De Wit
2007-01-19 14:23 ` Alexey Starikovskiy
2007-01-19 14:41 ` emisca
2007-01-24 4:19 ` Luming Yu
2007-01-24 4:38 ` Bjorn Helgaas
2007-01-24 14:54 ` Luming Yu
2007-01-24 16:54 ` Bjorn Helgaas
2007-01-26 16:31 ` emisca
2007-02-05 18:59 ` Thomas Renninger
2007-02-05 19:49 ` Dmitry Torokhov
2007-02-09 6:42 ` Dmitry Torokhov
2007-02-10 10:37 ` Rafael J. Wysocki
2007-03-04 16:56 ` emisca
2007-03-05 14:46 ` Dmitry Torokhov
2007-02-06 11:58 ` Luming Yu
2007-02-06 15:04 ` Peter Clifton [this message]
2007-01-19 17:32 ` Maciej Rutecki
2007-01-29 9:13 ` Pieter De Wit
2007-01-30 20:22 ` emisca
-- strict thread matches above, loose matches on Subject: below --
2007-01-19 7:50 Pieter De Wit
2007-01-19 8:14 ` Luming Yu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1170774296.5785.6.camel@localhost \
--to=pcjc2@cam.ac.uk \
--cc=Pieter.DeWit@vodacom.co.za \
--cc=alexey.y.starikovskiy@linux.intel.com \
--cc=bjorn.helgaas@hp.com \
--cc=dtor@mail.ru \
--cc=emisca.ml@gmail.com \
--cc=linux-acpi@vger.kernel.org \
--cc=luming.yu@gmail.com \
--cc=trenn@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).