ACPI patches for release onto Linux-2.6.21-rc4

ACPI patches for release onto Linux-2.6.21-rc4

[Len Brown]

The following ACPI patches for release onto Linux-2.6.21-rc4.
Thanks for your review,
-Len

[PATCH 1/9] ACPI: Add support to parse 2nd MADT

[Len Brown]

When a BIOS bug presents multiple APIC/MADTs,
Linux currently uses the 1st and ignores the 2nd.

But some machines work better if we use the 2nd.

http://bugzilla.kernel.org/show_bug.cgi?id=7465

Add a warning and boot parameter "acpi_apic_instance=2"
to allow parsing the 2nd.

No change to default behaviour in this patch.

Signed-off-by: Len Brown <len.brown@intel.com>
---
 Documentation/kernel-parameters.txt |    6 ++++
 drivers/acpi/tables.c               |   57 +++++++++++++++++++++++++++++++---
 2 files changed, 58 insertions(+), 5 deletions(-)

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 856c8b1..22c6b8c 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -138,6 +138,12 @@ and is between 256 and 4096 characters. It is defined in the file
 
 			See also Documentation/pm.txt, pci=noacpi
 
+	acpi_apic_instance=	[ACPI, IOAPIC]
+			Format: <int>
+			2: use 2nd APIC table, if available
+			1,0: use 1st APIC table
+			default: 0
+
 	acpi_sleep=	[HW,ACPI] Sleep options
 			Format: { s3_bios, s3_mode }
 			See Documentation/power/video.txt
diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c
index 849e2c3..c341918 100644
--- a/drivers/acpi/tables.c
+++ b/drivers/acpi/tables.c
@@ -42,7 +42,9 @@ static char *mps_inti_flags_trigger[] = { "dfl", "edge", "res", "level" };
 
 static struct acpi_table_desc initial_tables[ACPI_MAX_TABLES] __initdata;
 
-void acpi_table_print_madt_entry(struct acpi_subtable_header * header)
+static int acpi_apic_instance __initdata;
+
+void acpi_table_print_madt_entry(struct acpi_subtable_header *header)
 {
 	if (!header)
 		return;
@@ -183,8 +185,10 @@ acpi_table_parse_entries(char *id,
 	if (!handler)
 		return -EINVAL;
 
-	/* Locate the table (if exists). There should only be one. */
-	acpi_get_table(id, 0, &table_header);
+	if (strncmp(id, ACPI_SIG_MADT, 4) == 0)
+		acpi_get_table(id, acpi_apic_instance, &table_header);
+	else
+		acpi_get_table(id, 0, &table_header);
 
 	if (!table_header) {
 		printk(KERN_WARNING PREFIX "%4.4s not present\n", id);
@@ -237,10 +241,15 @@ acpi_table_parse_madt(enum acpi_madt_type id,
 int __init acpi_table_parse(char *id, acpi_table_handler handler)
 {
 	struct acpi_table_header *table = NULL;
+
 	if (!handler)
 		return -EINVAL;
 
-	acpi_get_table(id, 0, &table);
+	if (strncmp(id, ACPI_SIG_MADT, 4) == 0)
+		acpi_get_table(id, acpi_apic_instance, &table);
+	else
+		acpi_get_table(id, 0, &table);
+
 	if (table) {
 		handler(table);
 		return 0;
@@ -248,6 +257,31 @@ int __init acpi_table_parse(char *id, acpi_table_handler handler)
 		return 1;
 }
 
+/* 
+ * The BIOS is supposed to supply a single APIC/MADT,
+ * but some report two.  Provide a knob to use either.
+ * (don't you wish instance 0 and 1 were not the same?)
+ */
+static void __init check_multiple_madt(void)
+{
+	struct acpi_table_header *table = NULL;
+
+	acpi_get_table(ACPI_SIG_MADT, 2, &table);
+	if (table) {
+		printk(KERN_WARNING PREFIX
+		       "BIOS bug: multiple APIC/MADT found,"
+		       " using %d\n", acpi_apic_instance);
+		printk(KERN_WARNING PREFIX
+		       "If \"acpi_apic_instance=%d\" works better, "
+		       "notify linux-acpi@vger.kernel.org\n",
+		       acpi_apic_instance ? 0 : 2);
+
+	} else
+		acpi_apic_instance = 0;
+
+	return;
+}
+
 /*
  * acpi_table_init()
  *
@@ -257,9 +291,22 @@ int __init acpi_table_parse(char *id, acpi_table_handler handler)
  * result: sdt_entry[] is initialized
  */
 
-
 int __init acpi_table_init(void)
 {
 	acpi_initialize_tables(initial_tables, ACPI_MAX_TABLES, 0);
+	check_multiple_madt();
+	return 0;
+}
+
+static int __init acpi_parse_apic_instance(char *str)
+{
+
+	acpi_apic_instance = simple_strtoul(str, NULL, 0);
+
+	printk(KERN_NOTICE PREFIX "Shall use APIC/MADT table %d\n",
+	       acpi_apic_instance);
+
 	return 0;
 }
+
+early_param("acpi_apic_instance", acpi_parse_apic_instance);
-- 
1.5.0.3.382.g34572

[PATCH 2/9] ACPI: resolve HP nx6125 S3 immediate wakeup regression

[Len Brown]

From: Alexey Starikovskiy <alexey.y.starikovskiy@linux.intel.com>

Moving disable GPEs from enter_sleep up into sleep_prepare fixed
the disabled SCI on S4 on Acer laptops.

However, it caused an immediate S3 resume on the HP nx6125.
Apparently, on the HP, a GPE was getting re-enabled after
the prepare, but before the enter.

Close that window by restoring the GPE disable on enter.
This is redundant in most cases, but closes this window,
where S3 and S4 paths differ.

Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Acked-by: Ray Lee <ray-lk@madrabbit.org>
---
 drivers/acpi/hardware/hwsleep.c |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)

diff --git a/drivers/acpi/hardware/hwsleep.c b/drivers/acpi/hardware/hwsleep.c
index 8fa9312..c84b1fa 100644
--- a/drivers/acpi/hardware/hwsleep.c
+++ b/drivers/acpi/hardware/hwsleep.c
@@ -300,6 +300,11 @@ acpi_status asmlinkage acpi_enter_sleep_state(u8 sleep_state)
 	/*
 	 * 2) Enable all wakeup GPEs
 	 */
+	status = acpi_hw_disable_all_gpes();
+	if (ACPI_FAILURE(status)) {
+		return_ACPI_STATUS(status);
+	}
+
 	acpi_gbl_system_awake_and_running = FALSE;
 
 	status = acpi_hw_enable_all_wakeup_gpes();
-- 
1.5.0.3.382.g34572

[PATCH 3/9] sony-laptop: MAINTAINERS fix entry, add L: and W:

[Len Brown]

From: Mattia Dongili <malattia@linux.it>

Signed-off-by: Mattia Dongili <malattia@linux.it>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 MAINTAINERS |    5 ++---
 1 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/MAINTAINERS b/MAINTAINERS
index 17555bb..f3a79d4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3066,11 +3066,10 @@ L:	netdev@vger.kernel.org
 S:	Maintained
 
 SONY VAIO CONTROL DEVICE DRIVER
-P:	Stelian Pop
-M:	stelian@popies.net
 P:	Mattia Dongili
 M:	malattia@linux.it
-W:	http://popies.net/sonypi/
+L:	linux-acpi@vger.kernel.org
+W:	http://www.linux.it/~malattia/wiki/index.php/Sony_drivers
 S:	Maintained
 
 SOUND
-- 
1.5.0.3.382.g34572

[PATCH 4/9] ACPICA: revert "acpi_serialize" changes

[Len Brown]

This reverts 977a6226feae3e2c10a4d8227625ff0f04b49239
and reverts 1ba753acb372c2955a4843302e92e49ce82e2fea
and updates acpi_ev_queue_notify_request()
to restore the previous implementation of the
"acpi_serialize" workaround.

http://bugzilla.kernel.org/show_bug.cgi?id=8171

Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/events/evmisc.c      |    8 ++-
 drivers/acpi/events/evregion.c    |   15 ++++--
 drivers/acpi/events/evxface.c     |    6 ++-
 drivers/acpi/executer/excreate.c  |    5 ++-
 drivers/acpi/executer/exsystem.c  |   30 ++++++++---
 drivers/acpi/executer/exutils.c   |  104 +++++++------------------------------
 drivers/acpi/namespace/nseval.c   |   11 +++-
 drivers/acpi/namespace/nsinit.c   |    7 ++-
 drivers/acpi/namespace/nsxfeval.c |   11 +++--
 include/acpi/acinterp.h           |    6 +--
 10 files changed, 90 insertions(+), 113 deletions(-)

diff --git a/drivers/acpi/events/evmisc.c b/drivers/acpi/events/evmisc.c
index 3a799b9..cae786c 100644
--- a/drivers/acpi/events/evmisc.c
+++ b/drivers/acpi/events/evmisc.c
@@ -196,11 +196,15 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node * node,
 		notify_info->notify.value = (u16) notify_value;
 		notify_info->notify.handler_obj = handler_obj;
 
-		acpi_ex_relinquish_interpreter();
+		acpi_ex_exit_interpreter();
 
 		acpi_ev_notify_dispatch(notify_info);
 
-		acpi_ex_reacquire_interpreter();
+		status = acpi_ex_enter_interpreter();
+		if (ACPI_FAILURE(status)) {
+			return_ACPI_STATUS(status);
+		}
+
 	}
 
 	if (!handler_obj) {
diff --git a/drivers/acpi/events/evregion.c b/drivers/acpi/events/evregion.c
index e99f0c4..96b0e84 100644
--- a/drivers/acpi/events/evregion.c
+++ b/drivers/acpi/events/evregion.c
@@ -291,6 +291,7 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
 			       u32 bit_width, acpi_integer * value)
 {
 	acpi_status status;
+	acpi_status status2;
 	acpi_adr_space_handler handler;
 	acpi_adr_space_setup region_setup;
 	union acpi_operand_object *handler_desc;
@@ -344,7 +345,7 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
 		 * setup will potentially execute control methods
 		 * (e.g., _REG method for this region)
 		 */
-		acpi_ex_relinquish_interpreter();
+		acpi_ex_exit_interpreter();
 
 		status = region_setup(region_obj, ACPI_REGION_ACTIVATE,
 				      handler_desc->address_space.context,
@@ -352,7 +353,10 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
 
 		/* Re-enter the interpreter */
 
-		acpi_ex_reacquire_interpreter();
+		status2 = acpi_ex_enter_interpreter();
+		if (ACPI_FAILURE(status2)) {
+			return_ACPI_STATUS(status2);
+		}
 
 		/* Check for failure of the Region Setup */
 
@@ -405,7 +409,7 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
 		 * exit the interpreter because the handler *might* block -- we don't
 		 * know what it will do, so we can't hold the lock on the intepreter.
 		 */
-		acpi_ex_relinquish_interpreter();
+		acpi_ex_exit_interpreter();
 	}
 
 	/* Call the handler */
@@ -426,7 +430,10 @@ acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
 		 * We just returned from a non-default handler, we must re-enter the
 		 * interpreter
 		 */
-		acpi_ex_reacquire_interpreter();
+		status2 = acpi_ex_enter_interpreter();
+		if (ACPI_FAILURE(status2)) {
+			return_ACPI_STATUS(status2);
+		}
 	}
 
 	return_ACPI_STATUS(status);
diff --git a/drivers/acpi/events/evxface.c b/drivers/acpi/events/evxface.c
index 685a103..a3379ba 100644
--- a/drivers/acpi/events/evxface.c
+++ b/drivers/acpi/events/evxface.c
@@ -768,9 +768,11 @@ acpi_status acpi_acquire_global_lock(u16 timeout, u32 * handle)
 		return (AE_BAD_PARAMETER);
 	}
 
-	/* Must lock interpreter to prevent race conditions */
+	status = acpi_ex_enter_interpreter();
+	if (ACPI_FAILURE(status)) {
+		return (status);
+	}
 
-	acpi_ex_enter_interpreter();
 	status = acpi_ev_acquire_global_lock(timeout);
 	acpi_ex_exit_interpreter();
 
diff --git a/drivers/acpi/executer/excreate.c b/drivers/acpi/executer/excreate.c
index 7c38528..ae97812 100644
--- a/drivers/acpi/executer/excreate.c
+++ b/drivers/acpi/executer/excreate.c
@@ -583,7 +583,10 @@ acpi_ex_create_method(u8 * aml_start,
 	 * Get the sync_level. If method is serialized, a mutex will be
 	 * created for this method when it is parsed.
 	 */
-	if (method_flags & AML_METHOD_SERIALIZED) {
+	if (acpi_gbl_all_methods_serialized) {
+		obj_desc->method.sync_level = 0;
+		obj_desc->method.method_flags |= AML_METHOD_SERIALIZED;
+	} else if (method_flags & AML_METHOD_SERIALIZED) {
 		/*
 		 * ACPI 1.0: sync_level = 0
 		 * ACPI 2.0: sync_level = sync_level in method declaration
diff --git a/drivers/acpi/executer/exsystem.c b/drivers/acpi/executer/exsystem.c
index 9460baf..b2edf62 100644
--- a/drivers/acpi/executer/exsystem.c
+++ b/drivers/acpi/executer/exsystem.c
@@ -66,6 +66,7 @@ ACPI_MODULE_NAME("exsystem")
 acpi_status acpi_ex_system_wait_semaphore(acpi_semaphore semaphore, u16 timeout)
 {
 	acpi_status status;
+	acpi_status status2;
 
 	ACPI_FUNCTION_TRACE(ex_system_wait_semaphore);
 
@@ -78,7 +79,7 @@ acpi_status acpi_ex_system_wait_semaphore(acpi_semaphore semaphore, u16 timeout)
 
 		/* We must wait, so unlock the interpreter */
 
-		acpi_ex_relinquish_interpreter();
+		acpi_ex_exit_interpreter();
 
 		status = acpi_os_wait_semaphore(semaphore, 1, timeout);
 
@@ -88,7 +89,13 @@ acpi_status acpi_ex_system_wait_semaphore(acpi_semaphore semaphore, u16 timeout)
 
 		/* Reacquire the interpreter */
 
-		acpi_ex_reacquire_interpreter();
+		status2 = acpi_ex_enter_interpreter();
+		if (ACPI_FAILURE(status2)) {
+
+			/* Report fatal error, could not acquire interpreter */
+
+			return_ACPI_STATUS(status2);
+		}
 	}
 
 	return_ACPI_STATUS(status);
@@ -112,6 +119,7 @@ acpi_status acpi_ex_system_wait_semaphore(acpi_semaphore semaphore, u16 timeout)
 acpi_status acpi_ex_system_wait_mutex(acpi_mutex mutex, u16 timeout)
 {
 	acpi_status status;
+	acpi_status status2;
 
 	ACPI_FUNCTION_TRACE(ex_system_wait_mutex);
 
@@ -124,7 +132,7 @@ acpi_status acpi_ex_system_wait_mutex(acpi_mutex mutex, u16 timeout)
 
 		/* We must wait, so unlock the interpreter */
 
-		acpi_ex_relinquish_interpreter();
+		acpi_ex_exit_interpreter();
 
 		status = acpi_os_acquire_mutex(mutex, timeout);
 
@@ -134,7 +142,13 @@ acpi_status acpi_ex_system_wait_mutex(acpi_mutex mutex, u16 timeout)
 
 		/* Reacquire the interpreter */
 
-		acpi_ex_reacquire_interpreter();
+		status2 = acpi_ex_enter_interpreter();
+		if (ACPI_FAILURE(status2)) {
+
+			/* Report fatal error, could not acquire interpreter */
+
+			return_ACPI_STATUS(status2);
+		}
 	}
 
 	return_ACPI_STATUS(status);
@@ -195,18 +209,20 @@ acpi_status acpi_ex_system_do_stall(u32 how_long)
 
 acpi_status acpi_ex_system_do_suspend(acpi_integer how_long)
 {
+	acpi_status status;
+
 	ACPI_FUNCTION_ENTRY();
 
 	/* Since this thread will sleep, we must release the interpreter */
 
-	acpi_ex_relinquish_interpreter();
+	acpi_ex_exit_interpreter();
 
 	acpi_os_sleep(how_long);
 
 	/* And now we must get the interpreter again */
 
-	acpi_ex_reacquire_interpreter();
-	return (AE_OK);
+	status = acpi_ex_enter_interpreter();
+	return (status);
 }
 
 /*******************************************************************************
diff --git a/drivers/acpi/executer/exutils.c b/drivers/acpi/executer/exutils.c
index 6b0aecc..aea461f 100644
--- a/drivers/acpi/executer/exutils.c
+++ b/drivers/acpi/executer/exutils.c
@@ -76,15 +76,14 @@ static u32 acpi_ex_digits_needed(acpi_integer value, u32 base);
  *
  * PARAMETERS:  None
  *
- * RETURN:      None
+ * RETURN:      Status
  *
- * DESCRIPTION: Enter the interpreter execution region. Failure to enter
- *              the interpreter region is a fatal system error. Used in
- *              conjunction with exit_interpreter.
+ * DESCRIPTION: Enter the interpreter execution region.  Failure to enter
+ *              the interpreter region is a fatal system error
  *
  ******************************************************************************/
 
-void acpi_ex_enter_interpreter(void)
+acpi_status acpi_ex_enter_interpreter(void)
 {
 	acpi_status status;
 
@@ -92,42 +91,10 @@ void acpi_ex_enter_interpreter(void)
 
 	status = acpi_ut_acquire_mutex(ACPI_MTX_INTERPRETER);
 	if (ACPI_FAILURE(status)) {
-		ACPI_ERROR((AE_INFO,
-			    "Could not acquire AML Interpreter mutex"));
+		ACPI_ERROR((AE_INFO, "Could not acquire interpreter mutex"));
 	}
 
-	return_VOID;
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ex_reacquire_interpreter
- *
- * PARAMETERS:  None
- *
- * RETURN:      None
- *
- * DESCRIPTION: Reacquire the interpreter execution region from within the
- *              interpreter code. Failure to enter the interpreter region is a
- *              fatal system error. Used in  conjuction with
- *              relinquish_interpreter
- *
- ******************************************************************************/
-
-void acpi_ex_reacquire_interpreter(void)
-{
-	ACPI_FUNCTION_TRACE(ex_reacquire_interpreter);
-
-	/*
-	 * If the global serialized flag is set, do not release the interpreter,
-	 * since it was not actually released by acpi_ex_relinquish_interpreter.
-	 * This forces the interpreter to be single threaded.
-	 */
-	if (!acpi_gbl_all_methods_serialized) {
-		acpi_ex_enter_interpreter();
-	}
-
-	return_VOID;
+	return_ACPI_STATUS(status);
 }
 
 /*******************************************************************************
@@ -138,9 +105,17 @@ void acpi_ex_reacquire_interpreter(void)
  *
  * RETURN:      None
  *
- * DESCRIPTION: Exit the interpreter execution region. This is the top level
- *              routine used to exit the interpreter when all processing has
- *              been completed.
+ * DESCRIPTION: Exit the interpreter execution region
+ *
+ * Cases where the interpreter is unlocked:
+ *      1) Completion of the execution of a control method
+ *      2) Method blocked on a Sleep() AML opcode
+ *      3) Method blocked on an Acquire() AML opcode
+ *      4) Method blocked on a Wait() AML opcode
+ *      5) Method blocked to acquire the global lock
+ *      6) Method blocked to execute a serialized control method that is
+ *          already executing
+ *      7) About to invoke a user-installed opregion handler
  *
  ******************************************************************************/
 
@@ -152,46 +127,7 @@ void acpi_ex_exit_interpreter(void)
 
 	status = acpi_ut_release_mutex(ACPI_MTX_INTERPRETER);
 	if (ACPI_FAILURE(status)) {
-		ACPI_ERROR((AE_INFO,
-			    "Could not release AML Interpreter mutex"));
-	}
-
-	return_VOID;
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ex_relinquish_interpreter
- *
- * PARAMETERS:  None
- *
- * RETURN:      None
- *
- * DESCRIPTION: Exit the interpreter execution region, from within the
- *              interpreter - before attempting an operation that will possibly
- *              block the running thread.
- *
- * Cases where the interpreter is unlocked internally
- *      1) Method to be blocked on a Sleep() AML opcode
- *      2) Method to be blocked on an Acquire() AML opcode
- *      3) Method to be blocked on a Wait() AML opcode
- *      4) Method to be blocked to acquire the global lock
- *      5) Method to be blocked waiting to execute a serialized control method
- *          that is currently executing
- *      6) About to invoke a user-installed opregion handler
- *
- ******************************************************************************/
-
-void acpi_ex_relinquish_interpreter(void)
-{
-	ACPI_FUNCTION_TRACE(ex_relinquish_interpreter);
-
-	/*
-	 * If the global serialized flag is set, do not release the interpreter.
-	 * This forces the interpreter to be single threaded.
-	 */
-	if (!acpi_gbl_all_methods_serialized) {
-		acpi_ex_exit_interpreter();
+		ACPI_ERROR((AE_INFO, "Could not release interpreter mutex"));
 	}
 
 	return_VOID;
@@ -205,8 +141,8 @@ void acpi_ex_relinquish_interpreter(void)
  *
  * RETURN:      none
  *
- * DESCRIPTION: Truncate an ACPI Integer to 32 bits if the execution mode is
- *              32-bit, as determined by the revision of the DSDT.
+ * DESCRIPTION: Truncate a number to 32-bits if the currently executing method
+ *              belongs to a 32-bit ACPI table.
  *
  ******************************************************************************/
 
diff --git a/drivers/acpi/namespace/nseval.c b/drivers/acpi/namespace/nseval.c
index aa6370c..26fd0dd 100644
--- a/drivers/acpi/namespace/nseval.c
+++ b/drivers/acpi/namespace/nseval.c
@@ -154,7 +154,11 @@ acpi_status acpi_ns_evaluate(struct acpi_evaluate_info *info)
 		 * Execute the method via the interpreter. The interpreter is locked
 		 * here before calling into the AML parser
 		 */
-		acpi_ex_enter_interpreter();
+		status = acpi_ex_enter_interpreter();
+		if (ACPI_FAILURE(status)) {
+			return_ACPI_STATUS(status);
+		}
+
 		status = acpi_ps_execute_method(info);
 		acpi_ex_exit_interpreter();
 	} else {
@@ -178,7 +182,10 @@ acpi_status acpi_ns_evaluate(struct acpi_evaluate_info *info)
 		 * resolution, we must lock it because we could access an opregion.
 		 * The opregion access code assumes that the interpreter is locked.
 		 */
-		acpi_ex_enter_interpreter();
+		status = acpi_ex_enter_interpreter();
+		if (ACPI_FAILURE(status)) {
+			return_ACPI_STATUS(status);
+		}
 
 		/* Function has a strange interface */
 
diff --git a/drivers/acpi/namespace/nsinit.c b/drivers/acpi/namespace/nsinit.c
index 33db224..c4ab615 100644
--- a/drivers/acpi/namespace/nsinit.c
+++ b/drivers/acpi/namespace/nsinit.c
@@ -214,7 +214,7 @@ acpi_ns_init_one_object(acpi_handle obj_handle,
 			u32 level, void *context, void **return_value)
 {
 	acpi_object_type type;
-	acpi_status status = AE_OK;
+	acpi_status status;
 	struct acpi_init_walk_info *info =
 	    (struct acpi_init_walk_info *)context;
 	struct acpi_namespace_node *node =
@@ -268,7 +268,10 @@ acpi_ns_init_one_object(acpi_handle obj_handle,
 	/*
 	 * Must lock the interpreter before executing AML code
 	 */
-	acpi_ex_enter_interpreter();
+	status = acpi_ex_enter_interpreter();
+	if (ACPI_FAILURE(status)) {
+		return (status);
+	}
 
 	/*
 	 * Each of these types can contain executable AML code within the
diff --git a/drivers/acpi/namespace/nsxfeval.c b/drivers/acpi/namespace/nsxfeval.c
index 7ac6ace..8904d0f 100644
--- a/drivers/acpi/namespace/nsxfeval.c
+++ b/drivers/acpi/namespace/nsxfeval.c
@@ -170,6 +170,7 @@ acpi_evaluate_object(acpi_handle handle,
 		     struct acpi_buffer *return_buffer)
 {
 	acpi_status status;
+	acpi_status status2;
 	struct acpi_evaluate_info *info;
 	acpi_size buffer_space_needed;
 	u32 i;
@@ -328,12 +329,14 @@ acpi_evaluate_object(acpi_handle handle,
 		 * Delete the internal return object. NOTE: Interpreter must be
 		 * locked to avoid race condition.
 		 */
-		acpi_ex_enter_interpreter();
+		status2 = acpi_ex_enter_interpreter();
+		if (ACPI_SUCCESS(status2)) {
 
-		/* Remove one reference on the return object (should delete it) */
+			/* Remove one reference on the return object (should delete it) */
 
-		acpi_ut_remove_reference(info->return_object);
-		acpi_ex_exit_interpreter();
+			acpi_ut_remove_reference(info->return_object);
+			acpi_ex_exit_interpreter();
+		}
 	}
 
       cleanup:
diff --git a/include/acpi/acinterp.h b/include/acpi/acinterp.h
index 73967c8..4409830 100644
--- a/include/acpi/acinterp.h
+++ b/include/acpi/acinterp.h
@@ -446,14 +446,10 @@ acpi_ex_copy_integer_to_buffer_field(union acpi_operand_object *source_desc,
 /*
  * exutils - interpreter/scanner utilities
  */
-void acpi_ex_enter_interpreter(void);
+acpi_status acpi_ex_enter_interpreter(void);
 
 void acpi_ex_exit_interpreter(void);
 
-void acpi_ex_reacquire_interpreter(void);
-
-void acpi_ex_relinquish_interpreter(void);
-
 void acpi_ex_truncate_for32bit_table(union acpi_operand_object *obj_desc);
 
 u8 acpi_ex_acquire_global_lock(u32 rule);
-- 
1.5.0.3.382.g34572

[PATCH 5/9] ACPI: parse 2nd MADT by default

[Len Brown]

http://bugzilla.kernel.org/show_bug.cgi?id=7465

Signed-off-by: Len Brown <len.brown@intel.com>
---
 Documentation/kernel-parameters.txt |    2 +-
 drivers/acpi/tables.c               |    2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 22c6b8c..f0b7a5e 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -142,7 +142,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			Format: <int>
 			2: use 2nd APIC table, if available
 			1,0: use 1st APIC table
-			default: 0
+			default: 2
 
 	acpi_sleep=	[HW,ACPI] Sleep options
 			Format: { s3_bios, s3_mode }
diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c
index c341918..96792a6 100644
--- a/drivers/acpi/tables.c
+++ b/drivers/acpi/tables.c
@@ -42,7 +42,7 @@ static char *mps_inti_flags_trigger[] = { "dfl", "edge", "res", "level" };
 
 static struct acpi_table_desc initial_tables[ACPI_MAX_TABLES] __initdata;
 
-static int acpi_apic_instance __initdata;
+static int acpi_apic_instance __initdata = 2;
 
 void acpi_table_print_madt_entry(struct acpi_subtable_header *header)
 {
-- 
1.5.0.3.382.g34572

[PATCH 6/9] ACPI: ibm-acpi: allow module to load when acpi notifiers can't be set (v2)

[Len Brown]

From: Henrique de Moraes Holschuh <hmh@hmh.eng.br>

This patch allows for ibm-acpi to coexist (with diminished functionality) with
other drivers like ACPI_BAY.  ibm-acpi will simply disable the functions it is
not able to register ACPI notifiers for.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Chris Wedgwood <cw@f00f.org>
Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/ibm_acpi.c |   19 ++++++++++++++++---
 1 files changed, 16 insertions(+), 3 deletions(-)

diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c
index 3690136..dc10966 100644
--- a/drivers/acpi/ibm_acpi.c
+++ b/drivers/acpi/ibm_acpi.c
@@ -2507,7 +2507,7 @@ static int __init setup_notify(struct ibm_struct *ibm)
 	ret = acpi_bus_get_device(*ibm->handle, &ibm->device);
 	if (ret < 0) {
 		printk(IBM_ERR "%s device not present\n", ibm->name);
-		return 0;
+		return -ENODEV;
 	}
 
 	acpi_driver_data(ibm->device) = ibm;
@@ -2516,8 +2516,13 @@ static int __init setup_notify(struct ibm_struct *ibm)
 	status = acpi_install_notify_handler(*ibm->handle, ibm->type,
 					     dispatch_notify, ibm);
 	if (ACPI_FAILURE(status)) {
-		printk(IBM_ERR "acpi_install_notify_handler(%s) failed: %d\n",
-		       ibm->name, status);
+		if (status == AE_ALREADY_EXISTS) {
+			printk(IBM_NOTICE "another device driver is already handling %s events\n",
+				ibm->name);
+		} else {
+			printk(IBM_ERR "acpi_install_notify_handler(%s) failed: %d\n",
+				ibm->name, status);
+		}
 		return -ENODEV;
 	}
 	ibm->notify_installed = 1;
@@ -2553,6 +2558,8 @@ static int __init register_driver(struct ibm_struct *ibm)
 	return ret;
 }
 
+static void ibm_exit(struct ibm_struct *ibm);
+
 static int __init ibm_init(struct ibm_struct *ibm)
 {
 	int ret;
@@ -2594,6 +2601,12 @@ static int __init ibm_init(struct ibm_struct *ibm)
 
 	if (ibm->notify) {
 		ret = setup_notify(ibm);
+		if (ret == -ENODEV) {
+			printk(IBM_NOTICE "disabling subdriver %s\n",
+				ibm->name);
+			ibm_exit(ibm);
+			return 0;
+		}
 		if (ret < 0)
 			return ret;
 	}
-- 
1.5.0.3.382.g34572

[PATCH 7/9] ACPI: Only use IPI on known broken machines (AMD, Dothan/BaniasPentium M)

[Len Brown]

From: Thomas Renninger <trenn@suse.de>

Use IPI for blacklisted CPUs, add parameter IPI vs LAPIC

Currently, Linux disables lapic timer for all machines with C2 and higher
C-state support.

According to Intel only specific Intel models (Banias/Dothan) are broken
in respect of not waking up from C2 with lapic.

However, I am not sure about the naming of the parameter and how it
could/should get integrated into the dyntick part
(CONFIG_GENERIC_CLOCKEVENTS). There, a more fine grained check (TSC
still running?, ..) is needed? Does this make sense (always use
CLOCK_EVT_NOTIFY_BROADCAST_ON, but use OFF if forced by use_ipi=0:
clockevents_notify(use_ipi ? CLOCK_EVT_NOTIFY_BROADCAST_ON :
CLOCK_EVT_NOTIFY_BROADCAST_OFF, &pr->id);

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 drivers/acpi/processor_idle.c |   38 +++++++++++++++++++++++++++++---------
 1 files changed, 29 insertions(+), 9 deletions(-)

diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 6077300..562124e 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -89,6 +89,12 @@ module_param(nocst, uint, 0000);
 static unsigned int bm_history __read_mostly =
     (HZ >= 800 ? 0xFFFFFFFF : ((1U << (HZ / 25)) - 1));
 module_param(bm_history, uint, 0644);
+
+static unsigned use_ipi = 2;
+module_param(use_ipi, uint, 0644);
+MODULE_PARM_DESC(use_ipi, "IPI (vs. LAPIC) irqs for not waking up from C2/C3"
+		 " machines. 0=apic, 1=ipi, 2=auto\n");
+
 /* --------------------------------------------------------------------------
                                 Power Management
    -------------------------------------------------------------------------- */
@@ -260,9 +266,8 @@ static void acpi_cstate_enter(struct acpi_processor_cx *cstate)
 
 /*
  * Some BIOS implementations switch to C3 in the published C2 state.
- * This seems to be a common problem on AMD boxen, but other vendors
- * are affected too. We pick the most conservative approach: we assume
- * that the local APIC stops in both C2 and C3.
+ * This seems to be a common problem on AMD boxen and Intel Dothan/Banias
+ * Pentium M machines.
  */
 static void acpi_timer_check_state(int state, struct acpi_processor *pr,
 				   struct acpi_processor_cx *cx)
@@ -276,8 +281,17 @@ static void acpi_timer_check_state(int state, struct acpi_processor *pr,
 	if (pwr->timer_broadcast_on_state < state)
 		return;
 
-	if (cx->type >= ACPI_STATE_C2)
-		pr->power.timer_broadcast_on_state = state;
+	if (cx->type >= ACPI_STATE_C2) {
+		if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
+			pr->power.timer_broadcast_on_state = state;
+		else if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
+			  boot_cpu_data.x86 == 6) &&
+			 (boot_cpu_data.x86_model == 13 ||
+			  boot_cpu_data.x86_model == 9))
+		{
+			pr->power.timer_broadcast_on_state = state;
+		}
+	}
 }
 
 static void acpi_propagate_timer_broadcast(struct acpi_processor *pr)
@@ -292,10 +306,16 @@ static void acpi_propagate_timer_broadcast(struct acpi_processor *pr)
 #else
 	cpumask_t mask = cpumask_of_cpu(pr->id);
 
-	if (pr->power.timer_broadcast_on_state < INT_MAX)
+	if (use_ipi == 0)
 		on_each_cpu(switch_APIC_timer_to_ipi, &mask, 1, 1);
-	else
+	else if (use_ipi == 1)
 		on_each_cpu(switch_ipi_to_APIC_timer, &mask, 1, 1);
+	else {
+		if (pr->power.timer_broadcast_on_state < INT_MAX)
+			on_each_cpu(switch_APIC_timer_to_ipi, &mask, 1, 1);
+		else
+			on_each_cpu(switch_ipi_to_APIC_timer, &mask, 1, 1);
+	}
 #endif
 }
 
@@ -1013,13 +1033,13 @@ static int acpi_processor_power_verify(struct acpi_processor *pr)
 
 		case ACPI_STATE_C2:
 			acpi_processor_power_verify_c2(cx);
-			if (cx->valid)
+			if (cx->valid && use_ipi != 0 && use_ipi != 1)
 				acpi_timer_check_state(i, pr, cx);
 			break;
 
 		case ACPI_STATE_C3:
 			acpi_processor_power_verify_c3(pr, cx);
-			if (cx->valid)
+			if (cx->valid && use_ipi != 0 && use_ipi != 1)
 				acpi_timer_check_state(i, pr, cx);
 			break;
 		}
-- 
1.5.0.3.382.g34572

[PATCH 8/9] ACPI: IA64: fix allnoconfig build

[Len Brown]

The evils of Kconfig's select bite us once again...
ia64/Kconfig selects ACPI, which depends on PM.
But select ignores dependencies, allnoconfig
chooses CONFIG_PM=n, and thus the menu of sub-options
under ACPI vanish, which breaks the build.

Manually select PM along with ACPI for now.
Some day, we should delete them both, or fix select.

Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
 arch/ia64/Kconfig |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)

diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index d51f0f1..e19185d 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -13,6 +13,7 @@ config IA64
 	bool
 	select PCI if (!IA64_HP_SIM)
 	select ACPI if (!IA64_HP_SIM)
+	select PM if (!IA64_HP_SIM)
 	default y
 	help
 	  The Itanium Processor Family is Intel's 64-bit successor to
-- 
1.5.0.3.382.g34572

[PATCH 9/9] ACPI: IA64: fix %ll build warnings

[Len Brown]

acpi_integer is 64-bits on all platforms, and so was defined as a u64.

i386 and x86_64 define u64 as unsigned long long.
ia64 defines u64 as long.

While these are all 64-bits, the kernel build warns about formating
a "long" with %ll:

drivers/ata/libata-acpi.c:176: warning: long long unsigned int format, acpi_integer arg (arg 5)

So skip using "u64" and define acpi_integer as "unsigned long long"
to make gcc happy with %ll.

Signed-off-by: Len Brown <len.brown@intel.com>
---
 include/acpi/actypes.h |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index 72a6e2c..56bf492 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -344,7 +344,7 @@ typedef u32 acpi_integer;
 
 /* 64-bit integers */
 
-typedef u64 acpi_integer;
+typedef unsigned long long              acpi_integer;
 #define ACPI_INTEGER_MAX                ACPI_UINT64_MAX
 #define ACPI_INTEGER_BIT_SIZE           64
 #define ACPI_MAX_DECIMAL_DIGITS         20	/* 2^64 = 18,446,744,073,709,551,616 */
-- 
1.5.0.3.382.g34572