From: Sergio Monteiro Basto <sergio@sergiomb.no-ip.org>
To: acpi devel <linux-acpi@vger.kernel.org>
Subject: scary warnings
Date: Fri, 01 Jun 2007 01:11:28 +0100 [thread overview]
Message-ID: <1180656688.3779.6.camel@monteirov> (raw)
[-- Attachment #1.1: Type: text/plain, Size: 1214 bytes --]
I got this messages warnings, I just found it, after had other problems
not related with ACPI, I am been running with this kernels one or two
months ago, and I don't had problems, just reporting the situation,
could be useful anyway.
Thanks,
ACPI Warning (tbfadt-0360): Ignoring BIOS FADT r2 C-state control [20070126]
(...)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI Warning (tbutils-0158): Incorrect checksum in table [ ð] - 00, should be E7 [20070126]
ACPI Error (tbinstal-0134): Table has invalid signature [ ð], must be SSDT or PSDT [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node ffff810037cc3b50), AE_BAD_SIGNATURE
ACPI Warning (tbutils-0158): Incorrect checksum in table [ ð] - 00, should be E7 [20070126]
ACPI Error (tbinstal-0134): Table has invalid signature [ ð], must be SSDT or PSDT [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node ffff810037cc3a50), AE_BAD_SIGNATURE
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
--
Sérgio M.B.
[-- Attachment #1.2: dmesg.txt --]
[-- Type: text/plain, Size: 4038 bytes --]
BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
ACPI: RSDP 000F7CA0, 0014 (r0 ACPIAM)
ACPI: RSDT 3FFB0000, 0034 (r1 A M I OEMRSDT 6000616 MSFT 97)
ACPI: FACP 3FFB0200, 0084 (r2 A M I OEMFACP 6000616 MSFT 97)
ACPI Warning (tbfadt-0360): Ignoring BIOS FADT r2 C-state control [20070126]
ACPI: DSDT 3FFB0450, 3CD7 (r1 75D8P 75D8P004 4 INTL 2002026)
ACPI: FACS 3FFC0000, 0040
ACPI: APIC 3FFB0390, 0078 (r1 A M I OEMAPIC 6000616 MSFT 97)
ACPI: MCFG 3FFB0410, 003C (r1 A M I OEMMCFG 6000616 MSFT 97)
ACPI: OEMB 3FFC0040, 0046 (r1 A M I AMI_OEM 6000616 MSFT 97)
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: Core revision 20070126
ACPI: bus type pci registered
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
PCI: Using ACPI for IRQ routing
Time: acpi_pm clocksource has been installed.
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 27
ACPI Warning (tbutils-0158): Incorrect checksum in table [ \x05ð] - 00, should be E7 [20070126]
ACPI Error (tbinstal-0134): Table has invalid signature [ \x05ð], must be SSDT or PSDT [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node ffff810037cc3b50), AE_BAD_SIGNATURE
ACPI Warning (tbutils-0158): Incorrect checksum in table [ \x05ð] - 00, should be E7 [20070126]
ACPI Error (tbinstal-0134): Table has invalid signature [ \x05ð], must be SSDT or PSDT [20070126]
ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node ffff810037cc3a50), AE_BAD_SIGNATURE
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ibm_acpi: ec object not found
[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 2192 bytes --]
next reply other threads:[~2007-06-01 0:20 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-01 0:11 Sergio Monteiro Basto [this message]
2007-06-01 0:55 ` scary warnings Len Brown
2007-06-06 2:10 ` Sergio Monteiro Basto
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1180656688.3779.6.camel@monteirov \
--to=sergio@sergiomb.no-ip.org \
--cc=linux-acpi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox