From: Len Brown <len.brown@intel.com>
To: linux-acpi@vger.kernel.org
Cc: Len Brown <len.brown@intel.com>
Subject: [PATCH 02/25] ACPI: thermal: create "thermal.crt=C" bootparam
Date: Fri, 24 Aug 2007 03:20:49 -0400 [thread overview]
Message-ID: <11879400782033-git-send-email-len.brown@intel.com> (raw)
Message-ID: <c52a7419af18594426bc601d1ea346dbbcf71e28.1187939442.git.len.brown@intel.com> (raw)
In-Reply-To: <11879400762710-git-send-email-len.brown@intel.com>
In-Reply-To: <3c1d36da1d5ed36979340efd233ddaacc45b0a02.1187939442.git.len.brown@intel.com>
Some hardware will malfunction at a temperature below
the BIOS provided critical shutdown threshold.
This hook allows moving the critical trip points down
to a temperature which provokes a graceful shutdown
before the hardware malfunction.
http://bugzilla.kernel.org/show_bug.cgi?id=8884
WARNING: A trip-point override will not get noticed
until the system delivers a temperature change event,
or unless thermal zone polling is enabled.
eg. "thermal.tzp=10"
Signed-off-by: Len Brown <len.brown@intel.com>
---
Documentation/kernel-parameters.txt | 4 ++++
drivers/acpi/thermal.c | 18 ++++++++++++++++++
2 files changed, 22 insertions(+), 0 deletions(-)
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 975f029..18dcfdd 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1826,6 +1826,10 @@ and is between 256 and 4096 characters. It is defined in the file
-1: disable all active trip points in all thermal zones
<degrees C>: override all lowest active trip points
+ thermal.crt= [HW,ACPI]
+ -1: disable all critical trip points in all thermal zones
+ <degrees C>: lower all critical trip points
+
thermal.nocrt= [HW,ACPI]
Set to disable actions on ACPI thermal zone
critical and hot trip points.
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 9b31f36..4c420fe 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -79,6 +79,10 @@ static int act;
module_param(act, int, 0644);
MODULE_PARM_DESC(act, "Disable or override all lowest active trip points.");
+static int crt;
+module_param(crt, int, 0644);
+MODULE_PARM_DESC(crt, "Disable or lower all critical trip points.");
+
static int tzp;
module_param(tzp, int, 0444);
MODULE_PARM_DESC(tzp, "Thermal zone polling frequency, in 1/10 seconds.");
@@ -340,6 +344,20 @@ static int acpi_thermal_get_trip_points(struct acpi_thermal *tz)
tz->trips.critical.temperature));
}
+ if (tz->trips.critical.flags.valid == 1) {
+ if (crt == -1) {
+ tz->trips.critical.flags.valid = 0;
+ } else if (crt > 0) {
+ unsigned long crt_k = CELSIUS_TO_KELVIN(crt);
+
+ /*
+ * Allow override to lower critical threshold
+ */
+ if (crt_k < tz->trips.critical.temperature)
+ tz->trips.critical.temperature = crt_k;
+ }
+ }
+
/* Critical Sleep (optional) */
status =
--
1.5.3.rc6.17.g1911
next prev parent reply other threads:[~2007-08-24 7:21 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-08-24 7:20 ACPI patches for Linux-2.6.23-rc3 Len Brown
[not found] ` <3c1d36da1d5ed36979340efd233ddaacc45b0a02.1187939442.git.len.brown@intel.com>
2007-08-24 7:20 ` [PATCH 01/25] ACPI: thermal: clean up MODULE_PARM_DESC newlines Len Brown
[not found] ` <c52a7419af18594426bc601d1ea346dbbcf71e28.1187939442.git.len.brown@intel.com>
2007-08-24 7:20 ` Len Brown [this message]
[not found] ` <5b31d895874f56174e4d885c065c9fc4b24b28bb.1187939442.git.len.brown@intel.com>
2007-08-24 7:20 ` [PATCH 03/25] Revert "ACPI: Battery: Synchronize battery operations." Len Brown
[not found] ` <8c99fdce30787b0d1fc00b907d4cd55a714e4cdd.1187939442.git.len.brown@intel.com>
2007-08-24 7:20 ` [PATCH 04/25] ACPI: thermal: set "thermal.nocrt" via DMI on Gigabyte GA-7ZX Len Brown
[not found] ` <61ec7567db103d537329b0db9a887db570431ff4.1187939442.git.len.brown@intel.com>
2007-08-24 7:20 ` [PATCH 05/25] ACPI: boot correctly with "nosmp" or "maxcpus=0" Len Brown
[not found] ` <a9a4d1771cbb3c97f247534358ed24b1abf0aacb.1187939442.git.len.brown@intel.com>
2007-08-24 7:20 ` [PATCH 06/25] Subject: "ACPI handle has no context!" should be KERN_DEBUG Len Brown
[not found] ` <14e04fb34ffa82ee61ae69f98d8fca12d2e8e31c.1187939442.git.len.brown@intel.com>
2007-08-24 7:20 ` [PATCH 08/25] ACPI: Schedule /proc/acpi/event for removal Len Brown
[not found] ` <f63211caacf6822049f02015faf1b78ba7a7984f.1187939442.git.len.brown@intel.com>
2007-08-24 7:20 ` [PATCH 09/25] ACPI: Fix a warning of discarding qualifiers from pointer target type Len Brown
[not found] ` <a7ecd1ea913346a72f41a002c365882dc05c9bd5.1187939442.git.len.brown@intel.com>
2007-08-24 7:20 ` [PATCH 10/25] ACPI: video: Add keycode for ACPI video driver hotkey events Len Brown
[not found] ` <a1eb96a2f635cdb8f626f4074dae2ba5a6fce1e8.1187939442.git.len.brown@intel.com>
2007-08-24 7:20 ` [PATCH 11/25] ACPI video hotkey: remove invalid events handler for video output devices Len Brown
[not found] ` <745ce81328d09b1a5ebddacd1fffc20905d1cce3.1187939442.git.len.brown@intel.com>
2007-08-24 7:20 ` [PATCH 12/25] ACPI video hotkey: export ACPI video hotkey events via input layer Len Brown
[not found] ` <f9319f903f898dd4b15dbc386499725ce6c59776.1187939442.git.len.brown@intel.com>
2007-08-24 7:21 ` [PATCH 13/25] ACPI: EC: revert fix for bugzilla 8709 Len Brown
[not found] ` <f46d1604ed84e5a4107bae1db7283e3a76d72ace.1187939442.git.len.brown@intel.com>
2007-08-24 7:21 ` [PATCH 14/25] sony-laptop: enable Vaio FZ events Len Brown
[not found] ` <015a916fbbf105bb15f4bbfd80c3b9b2f2e0d7db.1187939442.git.len.brown@intel.com>
2007-08-24 7:21 ` [PATCH 15/25] sony-laptop: call sonypi_compat_init earlier Len Brown
[not found] ` <e1996a69e162b1c99c3d3802684d1c388b54f47d.1187939442.git.len.brown@intel.com>
2007-08-24 7:21 ` [PATCH 16/25] asus-laptop: Fix rmmod of asus_laptop Len Brown
[not found] ` <79d2dfaa4e787f94b7f65f4611bc7d1c8d85fabc.1187939442.git.len.brown@intel.com>
2007-08-24 7:21 ` [PATCH 17/25] ACPI: enable GPEs before calling _WAK on resume Len Brown
[not found] ` <1e0aa9ad721349781b728ec4226876247e3fd431.1187939442.git.len.brown@intel.com>
2007-08-24 7:21 ` [PATCH 18/25] PNP: fix up after Lindent Len Brown
[not found] ` <4cec086b219224167c22dd020d3dd2d9220e1d98.1187939443.git.len.brown@intel.com>
2007-08-24 7:21 ` [PATCH 19/25] PNPACPI: simplify irq_flags() Len Brown
[not found] ` <4721a4cc8864f0eb92958c3e0479e7994e8b0072.1187939443.git.len.brown@intel.com>
2007-08-24 7:21 ` [PATCH 20/25] PNPACPI: remove unnecessary casts of "void *" Len Brown
[not found] ` <6c504d30a48157b7c05a0dfb6a799c72095e957d.1187939443.git.len.brown@intel.com>
2007-08-24 7:21 ` [PATCH 21/25] ISAPNP: removed unused isapnp_detected and ISAPNP_DEBUG Len Brown
[not found] ` <4f0217e30249ac0eb13b65ef64f2aee627465da2.1187939443.git.len.brown@intel.com>
2007-08-24 7:21 ` [PATCH 22/25] PNP: remove MODULE infrastructure Len Brown
[not found] ` <b173491339b9ae7f1322241ce6228c1268513a39.1187939443.git.len.brown@intel.com>
2007-08-24 7:21 ` [PATCH 23/25] PNP: remove null pointer checks Len Brown
[not found] ` <29bb7fd39d8976d9d510a9ab79f8942fdcd2b2ea.1187939443.git.len.brown@intel.com>
2007-08-24 7:21 ` [PATCH 24/25] make drivers/acpi/scan.c:create_modalias() static Len Brown
[not found] ` <3e069ee0c30d6f28b79e409ef2df1ffa427897ae.1187939443.git.len.brown@intel.com>
2007-08-24 7:21 ` [PATCH 25/25] ACPI: fix ia64 allnoconfig build Len Brown
2007-08-24 8:07 ` ACPI patches for Linux-2.6.23-rc3 Zhang Rui
2007-08-24 23:37 ` Len Brown
2007-08-25 5:26 ` Zhang Rui
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=11879400782033-git-send-email-len.brown@intel.com \
--to=len.brown@intel.com \
--cc=linux-acpi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).