Re: [PATCH]libata-acpi: add ACPI _PSx method

[Shaohua Li <shaohua.li@intel.com>]

On Thu, 2007-11-01 at 10:04 +0000, Alan Cox wrote:
> > +	max_devices = ata_link_max_devices(&ap->link);
> > +
> > +	for (i = 0; i < max_devices; ++i) {
> > +		struct ata_device *dev = &ap->link.device[i];
> 
> Better to use:
ok.
> 	ata_link_for_each_dev(dev, &ap->link) {		
> 
> > +
> > +		if (dev->acpi_handle)
> > +			acpi_bus_set_power(dev->acpi_handle,
> > +				state.event == PM_EVENT_ON ?
> > +				ACPI_STATE_D0: ACPI_STATE_D3);
> > +	}
> 
> Also should you not check ata_dev_enabled(dev) ?
Not sure, this is just to call a BIOS routine, but a check should be
safer. Thanks!

ACPI spec (ver 3.0a, p289) requires IDE power on/off executes ACPI _PSx
methods. As recently most PATA drivers use libata, this patch adds _PSx
method support in libata. ACPI spec doesn't mention if SATA requires the
same _PSx method.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Acked-by: Len Brown <len.brown@intel.com>
---
 drivers/ata/libata-acpi.c |   29 +++++++++++++++++++++++++++++
 drivers/ata/libata-eh.c   |    3 +++
 drivers/ata/libata.h      |    2 ++
 3 files changed, 34 insertions(+)

Index: linux/drivers/ata/libata-acpi.c
===================================================================
--- linux.orig/drivers/ata/libata-acpi.c	2007-11-01 10:54:25.000000000 +0800
+++ linux/drivers/ata/libata-acpi.c	2007-11-02 09:14:12.000000000 +0800
@@ -652,6 +652,35 @@ void ata_acpi_on_resume(struct ata_port 
 }
 
 /**
+ * ata_acpi_set_state - set the port power state
+ * @ap: target ATA port
+ * @state: state, on/off
+ *
+ * This function executes the _PS0/_PS3 ACPI method to set the power state.
+ * ACPI spec requires _PS0 when IDE power on and _PS3 when power off
+ */
+void ata_acpi_set_state(struct ata_port *ap, pm_message_t state)
+{
+	struct ata_device *dev;
+
+	if (!ap->acpi_handle || (ap->flags & ATA_FLAG_ACPI_SATA))
+		return;
+
+	/* channel first and then drives for power on and verse versa for power off */
+	if (state.event == PM_EVENT_ON)
+		acpi_bus_set_power(ap->acpi_handle, ACPI_STATE_D0);
+
+	ata_link_for_each_dev(dev, &ap->link) {
+		if (dev->acpi_handle && ata_dev_enabled(dev))
+			acpi_bus_set_power(dev->acpi_handle,
+				state.event == PM_EVENT_ON ?
+				ACPI_STATE_D0: ACPI_STATE_D3);
+	}
+	if (state.event != PM_EVENT_ON)
+		acpi_bus_set_power(ap->acpi_handle, ACPI_STATE_D3);
+}
+
+/**
  * ata_acpi_on_devcfg - ATA ACPI hook called on device donfiguration
  * @dev: target ATA device
  *
Index: linux/drivers/ata/libata-eh.c
===================================================================
--- linux.orig/drivers/ata/libata-eh.c	2007-11-01 10:54:25.000000000 +0800
+++ linux/drivers/ata/libata-eh.c	2007-11-02 09:01:41.000000000 +0800
@@ -2796,6 +2796,7 @@ static void ata_eh_handle_port_suspend(s
 	if (ap->ops->port_suspend)
 		rc = ap->ops->port_suspend(ap, ap->pm_mesg);
 
+	ata_acpi_set_state(ap, PMSG_SUSPEND);
  out:
 	/* report result */
 	spin_lock_irqsave(ap->lock, flags);
@@ -2841,6 +2842,8 @@ static void ata_eh_handle_port_resume(st
 
 	WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED));
 
+	ata_acpi_set_state(ap, PMSG_ON);
+
 	if (ap->ops->port_resume)
 		rc = ap->ops->port_resume(ap);
 
Index: linux/drivers/ata/libata.h
===================================================================
--- linux.orig/drivers/ata/libata.h	2007-11-01 10:54:25.000000000 +0800
+++ linux/drivers/ata/libata.h	2007-11-02 09:01:41.000000000 +0800
@@ -111,12 +111,14 @@ extern void ata_acpi_associate(struct at
 extern int ata_acpi_on_suspend(struct ata_port *ap);
 extern void ata_acpi_on_resume(struct ata_port *ap);
 extern int ata_acpi_on_devcfg(struct ata_device *adev);
+extern void ata_acpi_set_state(struct ata_port *ap, pm_message_t state);
 #else
 static inline void ata_acpi_associate_sata_port(struct ata_port *ap) { }
 static inline void ata_acpi_associate(struct ata_host *host) { }
 static inline int ata_acpi_on_suspend(struct ata_port *ap) { return 0; }
 static inline void ata_acpi_on_resume(struct ata_port *ap) { }
 static inline int ata_acpi_on_devcfg(struct ata_device *adev) { return 0; }
+static inline void ata_acpi_set_state(struct ata_port *ap, pm_message_t state) { }
 #endif
 
 /* libata-scsi.c */