* Re: ACPI: EC: GPE storm detected, transactions will use polling mode [not found] <1226722577.3104.4.camel@LiNuX> @ 2008-11-15 6:43 ` Andrew Morton 2008-11-15 6:56 ` Justin P. Mattock 2008-11-15 9:23 ` Alexey Starikovskiy 0 siblings, 2 replies; 15+ messages in thread From: Andrew Morton @ 2008-11-15 6:43 UTC (permalink / raw) To: Justin P. Mattock; +Cc: Linux Kernel Mailing List, linux-acpi (cc linux-acpi) On Fri, 14 Nov 2008 20:16:17 -0800 "Justin P. Mattock" <justinmattock@gmail.com> wrote: > just pulled the latest git today and am now noticing > the lovely gpe storm being triggered.(dmesg below); Are any other effects observeable? I assume that 2.6.27 didn't do this. > [ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00 > [ 0.000000] Linux version 2.6.28-rc4-00322-g58e20d8 (root@LiNuX) (gcc > version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Fri Nov 14 15:11:30 PST > 2008 > [ 0.000000] KERNEL supported cpus: > [ 0.000000] Intel GenuineIntel > [ 0.000000] AMD AuthenticAMD > [ 0.000000] NSC Geode by NSC > [ 0.000000] Cyrix CyrixInstead > [ 0.000000] Centaur CentaurHauls > [ 0.000000] Transmeta GenuineTMx86 > [ 0.000000] Transmeta TransmetaCPU > [ 0.000000] UMC UMC UMC UMC > [ 0.000000] BIOS-provided physical RAM map: > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 > (reserved) > [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 > (reserved) > [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f0ea000 (usable) > [ 0.000000] BIOS-e820: 000000003f0ea000 - 000000003f2eb000 (ACPI > NVS) > [ 0.000000] BIOS-e820: 000000003f2eb000 - 000000003febe000 (ACPI > data) > [ 0.000000] BIOS-e820: 000000003febe000 - 000000003feef000 (ACPI > NVS) > [ 0.000000] BIOS-e820: 000000003feef000 - 000000003ff00000 (ACPI > data) > [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 > (reserved) > [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 > (reserved) > [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 > (reserved) > [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 > (reserved) > [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 > (reserved) > [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 > (reserved) > [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 > (reserved) > [ 0.000000] DMI 2.4 present. > [ 0.000000] last_pfn = 0x3f0ea max_arch_pfn = 0x100000 > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new > 0x7010600070106 > [ 0.000000] Scanning 2 areas for low memory corruption > [ 0.000000] modified physical RAM map: > [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) > [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) > [ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable) > [ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved) > [ 0.000000] modified: 0000000000010000 - 0000000000092c00 (usable) > [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) > [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) > [ 0.000000] modified: 0000000000100000 - 000000003f0ea000 (usable) > [ 0.000000] modified: 000000003f0ea000 - 000000003f2eb000 (ACPI NVS) > [ 0.000000] modified: 000000003f2eb000 - 000000003febe000 (ACPI > data) > [ 0.000000] modified: 000000003febe000 - 000000003feef000 (ACPI NVS) > [ 0.000000] modified: 000000003feef000 - 000000003ff00000 (ACPI > data) > [ 0.000000] modified: 000000003ff00000 - 0000000040000000 (reserved) > [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) > [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) > [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) > [ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved) > [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) > [ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved) > [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-16000 > [ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE ) > [ 0.000000] ACPI: XSDT 3FEFD1C0, 0074 (r1 APPLE Apple00 A5 > 1000013) > [ 0.000000] ACPI: FACP 3FEFB000, 00F4 (r3 APPLE Apple00 A5 > Loki 5F) > [ 0.000000] ACPI: DSDT 3FEF0000, 48D1 (r1 APPLE MacBookP 20002 > INTL 20050309) > [ 0.000000] ACPI: FACS 3FEC0000, 0040 > [ 0.000000] ACPI: HPET 3FEFA000, 0038 (r1 APPLE Apple00 1 > Loki 5F) > [ 0.000000] ACPI: APIC 3FEF9000, 0068 (r1 APPLE Apple00 1 > Loki 5F) > [ 0.000000] ACPI: MCFG 3FEF8000, 003C (r1 APPLE Apple00 1 > Loki 5F) > [ 0.000000] ACPI: ASF! 3FEF7000, 00A0 (r32 APPLE Apple00 1 > Loki 5F) > [ 0.000000] ACPI: SBST 3FEF6000, 0030 (r1 APPLE Apple00 1 > Loki 5F) > [ 0.000000] ACPI: ECDT 3FEF5000, 0053 (r1 APPLE Apple00 1 > Loki 5F) > [ 0.000000] ACPI: SSDT 3FEEF000, 04DC (r1 APPLE CpuPm 3000 > INTL 20050309) > [ 0.000000] ACPI: SSDT 3FEBD000, 064F (r1 SataRe SataPri 1000 > INTL 20050309) > [ 0.000000] ACPI: SSDT 3FEBC000, 069C (r1 SataRe SataSec 1000 > INTL 20050309) > [ 0.000000] ACPI: DMI detected: Apple > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] 120MB HIGHMEM available. > [ 0.000000] 887MB LOWMEM available. > [ 0.000000] mapped low ram: 0 - 377fe000 > [ 0.000000] low ram: 00000000 - 377fe000 > [ 0.000000] bootmap 00012000 - 00018f00 > [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - > 00377fe000] > [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> > [0000000000 - 0000001000] > [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> > [0000001000 - 0000002000] > [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> > [0000006000 - 0000007000] > [ 0.000000] #3 [0000100000 - 000062bbe4] TEXT DATA BSS ==> > [0000100000 - 000062bbe4] > [ 0.000000] #4 [000062c000 - 000062f000] INIT_PG_TABLE ==> > [000062c000 - 000062f000] > [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> > [000009fc00 - 0000100000] > [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> > [0000010000 - 0000012000] > [ 0.000000] #7 [0000012000 - 0000019000] BOOTMAP ==> > [0000012000 - 0000019000] > [ 0.000000] Zone PFN ranges: > [ 0.000000] DMA 0x00000000 -> 0x00001000 > [ 0.000000] Normal 0x00001000 -> 0x000377fe > [ 0.000000] HighMem 0x000377fe -> 0x0003f0ea > [ 0.000000] Movable zone start PFN for each node > [ 0.000000] early_node_map[4] active PFN ranges > [ 0.000000] 0: 0x00000000 -> 0x00000002 > [ 0.000000] 0: 0x00000006 -> 0x00000007 > [ 0.000000] 0: 0x00000010 -> 0x00000092 > [ 0.000000] 0: 0x00000100 -> 0x0003f0ea > [ 0.000000] On node 0 totalpages: 258159 > [ 0.000000] free_area_init_node: node 0, pgdat c051f980, node_mem_map > c1000000 > [ 0.000000] DMA zone: 32 pages used for memmap > [ 0.000000] DMA zone: 0 pages reserved > [ 0.000000] DMA zone: 3941 pages, LIFO batch:0 > [ 0.000000] Normal zone: 1744 pages used for memmap > [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 > [ 0.000000] HighMem zone: 242 pages used for memmap > [ 0.000000] HighMem zone: 30714 pages, LIFO batch:7 > [ 0.000000] Movable zone: 0 pages used for memmap > [ 0.000000] Using APIC driver default > [ 0.000000] ACPI: PM-Timer IO Port: 0x408 > [ 0.000000] ACPI: Local APIC address 0xfee00000 > [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI > 0-23 > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high > level) > [ 0.000000] ACPI: IRQ0 used by override. > [ 0.000000] ACPI: IRQ2 used by override. > [ 0.000000] ACPI: IRQ9 used by override. > [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs > [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 > [ 0.000000] Using ACPI (MADT) for SMP configuration information > [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs > [ 0.000000] PM: Registered nosave memory: 0000000000002000 - > 0000000000006000 > [ 0.000000] PM: Registered nosave memory: 0000000000007000 - > 0000000000010000 > [ 0.000000] PM: Registered nosave memory: 0000000000092000 - > 00000000000a0000 > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - > 00000000000e0000 > [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - > 0000000000100000 > [ 0.000000] Allocating PCI resources starting at 50000000 (gap: > 40000000:b0000000) > [ 0.000000] PERCPU: Allocating 40960 bytes of per cpu data > [ 0.000000] NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1 > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. > Total pages: 256141 > [ 0.000000] Kernel command line: > BOOT_IMAGE=/boot/vmlinuz-2.6.28-rc4-00322-g58e20d8 root=/dev/sda1 ro > vga=790 debug pnpacpi=off pci=routeirq audit=1 selinux=1 enforcing=1 > [ 0.000000] audit: enabled (after initialization) > [ 0.000000] Enabling fast FPU save and restore... done. > [ 0.000000] Enabling unmasked SIMD FPU exception support... done. > [ 0.000000] Initializing CPU#0 > [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) > [ 0.000000] Extended CMOS year: 2000 > [ 0.000000] TSC: PIT calibration matches PMTIMER. 1 loops > [ 0.000000] Detected 2161.244 MHz processor. > [ 0.010000] Console: colour dummy device 80x25 > [ 0.010000] console [tty0] enabled > [ 0.010000] Dentry cache hash table entries: 131072 (order: 7, 524288 > bytes) > [ 0.010000] Inode-cache hash table entries: 65536 (order: 6, 262144 > bytes) > [ 0.010000] Scanning for low memory corruption every 60 seconds > [ 0.010000] Memory: 1017932k/1033128k available (2803k kernel code, > 14344k reserved, 1506k data, 404k init, 123824k highmem) > [ 0.010000] virtual kernel memory layout: > [ 0.010000] fixmap : 0xfff82000 - 0xfffff000 ( 500 kB) > [ 0.010000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) > [ 0.010000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) > [ 0.010000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) > [ 0.010000] .init : 0xc053c000 - 0xc05a1000 ( 404 kB) > [ 0.010000] .data : 0xc03bce25 - 0xc05357c4 (1506 kB) > [ 0.010000] .text : 0xc0100000 - 0xc03bce25 (2803 kB) > [ 0.010000] Checking if this processor honours the WP bit even in > supervisor mode...Ok. > [ 0.010000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, > CPUs=2, Nodes=1 > [ 0.010000] hpet clockevent registered > [ 0.010000] HPET: 3 timers in total, 0 timers will be used for > per-cpu timer > [ 0.010000] Calibrating delay loop (skipped), value calculated using > timer frequency.. 4322.48 BogoMIPS (lpj=21612440) > [ 0.010000] Security Framework initialized > [ 0.010000] SELinux: Initializing. > [ 0.010000] SELinux: Starting in enforcing mode > [ 0.010000] Failure registering Root Plug module with the kernel > [ 0.010000] Mount-cache hash table entries: 512 > [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 0.010000] CPU: L2 cache: 4096K > [ 0.010000] CPU: Physical Processor ID: 0 > [ 0.010000] CPU: Processor Core ID: 0 > [ 0.010000] Intel machine check architecture supported. > [ 0.010000] Intel machine check reporting enabled on CPU#0. > [ 0.010000] using mwait in idle threads. > [ 0.010000] Checking 'hlt' instruction... OK. > [ 0.040982] ACPI: Core revision 20080926 > [ 0.059747] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > [ 0.159768] CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz > stepping 06 > [ 0.160000] Booting processor 1 APIC 0x1 ip 0x6000 > [ 0.010000] Initializing CPU#1 > [ 0.010000] Calibrating delay using timer specific routine.. 4322.52 > BogoMIPS (lpj=21612624) > [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K > [ 0.010000] CPU: L2 cache: 4096K > [ 0.010000] CPU: Physical Processor ID: 0 > [ 0.010000] CPU: Processor Core ID: 1 > [ 0.010000] Intel machine check architecture supported. > [ 0.010000] Intel machine check reporting enabled on CPU#1. > [ 0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new > 0x7010600070106 > [ 0.311697] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz > stepping 06 > [ 0.311729] checking TSC synchronization [CPU#0 -> CPU#1]: passed. > [ 0.320021] Brought up 2 CPUs > [ 0.320026] Total of 2 processors activated (8645.01 BogoMIPS). > [ 0.320092] CPU0 attaching sched-domain: > [ 0.320097] domain 0: span 0-1 level MC > [ 0.320101] groups: 0 1 > [ 0.320109] CPU1 attaching sched-domain: > [ 0.320113] domain 0: span 0-1 level MC > [ 0.320117] groups: 1 0 > [ 0.320199] net_namespace: 540 bytes > [ 0.320199] Booting paravirtualized kernel on bare hardware > [ 0.320317] NET: Registered protocol family 16 > [ 0.320317] EISA bus registered > [ 0.320317] ACPI: bus type pci registered > [ 0.320317] PCI: Using configuration type 1 for base access > [ 0.331038] ACPI: EC: EC description table is found, configuring boot > EC > [ 0.331277] ACPI: EC: non-query interrupt received, switching to > interrupt mode > [ 0.342048] ACPI: BIOS _OSI(Linux) query ignored via DMI > [ 0.343134] ACPI: Interpreter enabled > [ 0.343139] ACPI: (supports S0 S3 S4 S5) > [ 0.343213] ACPI: Using IOAPIC for interrupt routing > [ 0.370295] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = > 0x62 > [ 0.370295] ACPI: EC: driver started in interrupt mode > [ 0.370410] ACPI: No dock devices found. > [ 0.370437] ACPI: PCI Root Bridge [PCI0] (0000:00) > [ 0.370494] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold > [ 0.370494] pci 0000:00:01.0: PME# disabled > [ 0.370494] pci 0000:00:07.0: reg 10 32bit mmio: > [0x50404000-0x50404fff] > [ 0.370494] pci 0000:00:1b.0: reg 10 64bit mmio: > [0x50400000-0x50403fff] > [ 0.370494] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > [ 0.370494] pci 0000:00:1b.0: PME# disabled > [ 0.370494] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > [ 0.370494] pci 0000:00:1c.0: PME# disabled > [ 0.370494] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold > [ 0.370494] pci 0000:00:1c.1: PME# disabled > [ 0.370508] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold > [ 0.370514] pci 0000:00:1c.2: PME# disabled > [ 0.370585] pci 0000:00:1d.0: reg 20 io port: [0x4080-0x409f] > [ 0.370653] pci 0000:00:1d.1: reg 20 io port: [0x4060-0x407f] > [ 0.370720] pci 0000:00:1d.2: reg 20 io port: [0x4040-0x405f] > [ 0.370788] pci 0000:00:1d.3: reg 20 io port: [0x4020-0x403f] > [ 0.370858] pci 0000:00:1d.7: reg 10 32bit mmio: > [0x50405400-0x504057ff] > [ 0.370907] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > [ 0.370914] pci 0000:00:1d.7: PME# disabled > [ 0.371081] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 > ACPI/GPIO/TCO > [ 0.371088] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 > GPIO > [ 0.371147] pci 0000:00:1f.1: reg 10 io port: [0x40d8-0x40df] > [ 0.371157] pci 0000:00:1f.1: reg 14 io port: [0x40ec-0x40ef] > [ 0.371167] pci 0000:00:1f.1: reg 18 io port: [0x40d0-0x40d7] > [ 0.371176] pci 0000:00:1f.1: reg 1c io port: [0x40e8-0x40eb] > [ 0.371186] pci 0000:00:1f.1: reg 20 io port: [0x40b0-0x40bf] > [ 0.371245] pci 0000:00:1f.2: reg 10 io port: [0x40c8-0x40cf] > [ 0.371254] pci 0000:00:1f.2: reg 14 io port: [0x40e4-0x40e7] > [ 0.371264] pci 0000:00:1f.2: reg 18 io port: [0x40c0-0x40c7] > [ 0.371273] pci 0000:00:1f.2: reg 1c io port: [0x40e0-0x40e3] > [ 0.371282] pci 0000:00:1f.2: reg 20 io port: [0x40a0-0x40af] > [ 0.371292] pci 0000:00:1f.2: reg 24 32bit mmio: > [0x50405000-0x504053ff] > [ 0.371313] pci 0000:00:1f.2: PME# supported from D3hot > [ 0.371319] pci 0000:00:1f.2: PME# disabled > [ 0.371387] pci 0000:00:1f.3: reg 20 io port: [0xefa0-0xefbf] > [ 0.371454] pci 0000:01:00.0: reg 10 32bit mmio: > [0x40000000-0x47ffffff] > [ 0.371464] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff] > [ 0.371474] pci 0000:01:00.0: reg 18 32bit mmio: > [0x50300000-0x5030ffff] > [ 0.371496] pci 0000:01:00.0: reg 30 32bit mmio: > [0xfffe0000-0xffffffff] > [ 0.371508] pci 0000:01:00.0: supports D1 D2 > [ 0.371568] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff] > [ 0.371573] pci 0000:00:01.0: bridge 32bit mmio: > [0x50300000-0x503fffff] > [ 0.371580] pci 0000:00:01.0: bridge 64bit mmio pref: > [0x40000000-0x47ffffff] > [ 0.371664] pci 0000:02:00.0: reg 10 64bit mmio: > [0x50200000-0x50203fff] > [ 0.371677] pci 0000:02:00.0: reg 18 io port: [0x2000-0x20ff] > [ 0.371714] pci 0000:02:00.0: reg 30 32bit mmio: > [0xfffe0000-0xffffffff] > [ 0.371731] pci 0000:02:00.0: supports D1 D2 > [ 0.371735] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot > D3cold > [ 0.371743] pci 0000:02:00.0: PME# disabled > [ 0.371805] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] > [ 0.371812] pci 0000:00:1c.0: bridge 32bit mmio: > [0x50200000-0x502fffff] > [ 0.371904] pci 0000:03:00.0: reg 10 64bit mmio: > [0x50100000-0x5010ffff] > [ 0.371963] pci 0000:03:00.0: supports D1 > [ 0.371966] pci 0000:03:00.0: PME# supported from D0 D1 D3hot > [ 0.371974] pci 0000:03:00.0: PME# disabled > [ 0.372050] pci 0000:00:1c.1: bridge 32bit mmio: > [0x50100000-0x501fffff] > [ 0.372119] pci 0000:00:1c.2: bridge io port: [0x1000-0x1fff] > [ 0.372125] pci 0000:00:1c.2: bridge 32bit mmio: > [0x4c100000-0x500fffff] > [ 0.372135] pci 0000:00:1c.2: bridge 64bit mmio pref: > [0x48000000-0x4bffffff] > [ 0.372197] pci 0000:0c:03.0: reg 10 32bit mmio: > [0x4c004000-0x4c0047ff] > [ 0.372209] pci 0000:0c:03.0: reg 14 32bit mmio: > [0x4c000000-0x4c003fff] > [ 0.372261] pci 0000:0c:03.0: supports D1 D2 > [ 0.372264] pci 0000:0c:03.0: PME# supported from D0 D1 D2 D3hot > [ 0.372271] pci 0000:0c:03.0: PME# disabled > [ 0.372333] pci 0000:00:1e.0: transparent bridge > [ 0.372343] pci 0000:00:1e.0: bridge 32bit mmio: > [0x4c000000-0x4c0fffff] > [ 0.372380] bus 00 -> node 0 > [ 0.372393] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > [ 0.374259] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] > [ 0.374857] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] > [ 0.375445] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] > [ 0.376038] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] > [ 0.376649] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] > [ 0.401106] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 > 14 15) *11 > [ 0.401106] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 > 14 15) > [ 0.401106] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 > 14 15) *11 > [ 0.401106] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 > 14 15) > [ 0.401354] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 > 14 15) *0, disabled. > [ 0.401642] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 > 14 15) *0, disabled. > [ 0.401932] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 > 14 15) > [ 0.402214] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 > 15) > [ 0.402326] SCSI subsystem initialized > [ 0.402326] libata version 3.00 loaded. > [ 0.402326] usbcore: registered new interface driver usbfs > [ 0.402326] usbcore: registered new interface driver hub > [ 0.402326] usbcore: registered new device driver usb > [ 0.402326] PCI: Using ACPI for IRQ routing > [ 0.402326] PCI: Routing PCI interrupts for all devices because > "pci=routeirq" specified > [ 0.402326] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ > 16 > [ 0.402326] pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ > 16 > [ 0.402326] pci 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ > 22 > [ 0.402326] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ > 17 > [ 0.402326] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ > 16 > [ 0.402326] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ > 18 > [ 0.402326] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ > 23 > [ 0.402326] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ > 19 > [ 0.402326] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ > 18 > [ 0.402326] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ > 16 > [ 0.402326] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ > 23 > [ 0.402326] pci 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ > 18 > [ 0.402326] pci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ > 19 > [ 0.402326] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ > 19 > [ 0.402326] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ > 16 > [ 0.402326] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ > 16 > [ 0.402326] pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ > 17 > [ 0.402326] pci 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ > 19 > [ 0.430080] cfg80211: Using static regulatory domain info > [ 0.430080] cfg80211: Regulatory domain: US > [ 0.430080] (start_freq - end_freq @ bandwidth), (max_antenna_gain, > max_eirp) > [ 0.430080] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 > mBm) > [ 0.430080] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 > mBm) > [ 0.430080] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 > mBm) > [ 0.430080] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 > mBm) > [ 0.430080] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 > mBm) > [ 0.430082] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 > mBm) > [ 0.430087] cfg80211: Calling CRDA for country: US > [ 0.430113] NetLabel: Initializing > [ 0.430113] NetLabel: domain hash size = 128 > [ 0.430113] NetLabel: protocols = UNLABELED CIPSOv4 > [ 0.430135] NetLabel: unlabeled traffic allowed by default > [ 0.430148] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 > [ 0.430154] hpet0: 3 comparators, 64-bit 14.318180 MHz counter > [ 0.460028] pnp: PnP ACPI: disabled > [ 0.495970] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 > [ 0.495976] pci 0000:00:01.0: IO window: 0x3000-0x3fff > [ 0.495982] pci 0000:00:01.0: MEM window: 0x50300000-0x503fffff > [ 0.495987] pci 0000:00:01.0: PREFETCH window: > 0x00000040000000-0x00000047ffffff > [ 0.495996] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 > [ 0.496001] pci 0000:00:1c.0: IO window: 0x2000-0x2fff > [ 0.496009] pci 0000:00:1c.0: MEM window: 0x50200000-0x502fffff > [ 0.496016] pci 0000:00:1c.0: PREFETCH window: > 0x00000050500000-0x000000505fffff > [ 0.496026] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 > [ 0.496030] pci 0000:00:1c.1: IO window: disabled > [ 0.496037] pci 0000:00:1c.1: MEM window: 0x50100000-0x501fffff > [ 0.496044] pci 0000:00:1c.1: PREFETCH window: disabled > [ 0.496053] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 > [ 0.496058] pci 0000:00:1c.2: IO window: 0x1000-0x1fff > [ 0.496066] pci 0000:00:1c.2: MEM window: 0x4c100000-0x500fffff > [ 0.496073] pci 0000:00:1c.2: PREFETCH window: > 0x00000048000000-0x0000004bffffff > [ 0.496084] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c > [ 0.496087] pci 0000:00:1e.0: IO window: disabled > [ 0.496095] pci 0000:00:1e.0: MEM window: 0x4c000000-0x4c0fffff > [ 0.496101] pci 0000:00:1e.0: PREFETCH window: disabled > [ 0.496115] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ > 16 > [ 0.496121] pci 0000:00:01.0: setting latency timer to 64 > [ 0.496131] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ > 17 > [ 0.496138] pci 0000:00:1c.0: setting latency timer to 64 > [ 0.496148] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ > 16 > [ 0.496155] pci 0000:00:1c.1: setting latency timer to 64 > [ 0.496165] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ > 18 > [ 0.496172] pci 0000:00:1c.2: setting latency timer to 64 > [ 0.496334] pci 0000:00:1e.0: power state changed by ACPI to D0 > [ 0.496343] pci 0000:00:1e.0: setting latency timer to 64 > [ 0.496349] bus: 00 index 0 io port: [0x00-0xffff] > [ 0.496352] bus: 00 index 1 mmio: [0x000000-0xffffffff] > [ 0.496356] bus: 01 index 0 io port: [0x3000-0x3fff] > [ 0.496360] bus: 01 index 1 mmio: [0x50300000-0x503fffff] > [ 0.496364] bus: 01 index 2 mmio: [0x40000000-0x47ffffff] > [ 0.496367] bus: 01 index 3 mmio: [0x0-0x0] > [ 0.496371] bus: 02 index 0 io port: [0x2000-0x2fff] > [ 0.496374] bus: 02 index 1 mmio: [0x50200000-0x502fffff] > [ 0.496378] bus: 02 index 2 mmio: [0x50500000-0x505fffff] > [ 0.496381] bus: 02 index 3 mmio: [0x0-0x0] > [ 0.496385] bus: 03 index 0 mmio: [0x0-0x0] > [ 0.496388] bus: 03 index 1 mmio: [0x50100000-0x501fffff] > [ 0.496392] bus: 03 index 2 mmio: [0x0-0x0] > [ 0.496395] bus: 03 index 3 mmio: [0x0-0x0] > [ 0.496398] bus: 04 index 0 io port: [0x1000-0x1fff] > [ 0.496402] bus: 04 index 1 mmio: [0x4c100000-0x500fffff] > [ 0.496405] bus: 04 index 2 mmio: [0x48000000-0x4bffffff] > [ 0.496409] bus: 04 index 3 mmio: [0x0-0x0] > [ 0.496412] bus: 0c index 0 mmio: [0x0-0x0] > [ 0.496415] bus: 0c index 1 mmio: [0x4c000000-0x4c0fffff] > [ 0.496419] bus: 0c index 2 mmio: [0x0-0x0] > [ 0.496422] bus: 0c index 3 io port: [0x00-0xffff] > [ 0.496426] bus: 0c index 4 mmio: [0x000000-0xffffffff] > [ 0.496438] NET: Registered protocol family 2 > [ 0.501753] Switched to high resolution mode on CPU 1 > [ 0.510002] Switched to high resolution mode on CPU 0 > [ 0.520078] IP route cache hash table entries: 32768 (order: 5, > 131072 bytes) > [ 0.520400] TCP established hash table entries: 131072 (order: 8, > 1048576 bytes) > [ 0.520841] TCP bind hash table entries: 65536 (order: 8, 1310720 > bytes) > [ 0.521393] TCP: Hash tables configured (established 131072 bind > 65536) > [ 0.521398] TCP reno registered > [ 0.530152] NET: Registered protocol family 1 > [ 0.531157] platform rtc_cmos: registered platform RTC device (no PNP > device found) > [ 0.533242] Microcode Update Driver: v2.00 > <tigran@aivazian.fsnet.co.uk>, Peter Oruba > [ 0.534651] Initializing RT-Tester: OK > [ 0.534764] audit: initializing netlink socket (enabled) > [ 0.534829] type=2000 audit(1226705960.531:1): initialized > [ 0.539745] highmem bounce pool size: 64 pages > [ 0.539753] HugeTLB registered 4 MB page size, pre-allocated 0 pages > [ 0.555826] fuse init (API version 7.10) > [ 0.556420] msgmni has been set to 1747 > [ 0.556663] SELinux: Registering netfilter hooks > [ 0.557586] alg: No test for stdrng (krng) > [ 0.557607] io scheduler noop registered > [ 0.557954] io scheduler cfq registered (default) > [ 0.558112] pci 0000:01:00.0: Boot video device > [ 0.579154] vesafb: framebuffer at 0x40000000, mapped to 0xf8100000, > using 3072k, total 16384k > [ 0.579161] vesafb: mode is 1024x768x16, linelength=2048, pages=9 > [ 0.579165] vesafb: protected mode interface info at c000:ad0c > [ 0.579169] vesafb: pmi: set display start = c00cad94, set palette = > c00cae50 > [ 0.579172] vesafb: scrolling: redraw > [ 0.579176] vesafb: Truecolor: size=0:5:5:5, shift=0:10:5:0 > [ 0.603479] Console: switching to colour frame buffer device 128x48 > [ 0.625655] fb0: VESA VGA frame buffer device > [ 0.639217] loop: module loaded > [ 0.639369] Linux video capture interface: v2.00 > [ 0.639824] input: Macintosh mouse button emulation > as /class/input/input0 > [ 0.640456] Driver 'sd' needs updating - please use bus_type methods > [ 0.640844] Driver 'sr' needs updating - please use bus_type methods > [ 0.641493] ata_piix 0000:00:1f.1: version 2.12 > [ 0.641796] ata_piix 0000:00:1f.1: power state changed by ACPI to D0 > [ 0.642093] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) > -> IRQ 18 > [ 0.642464] ata_piix 0000:00:1f.1: setting latency timer to 64 > [ 0.642822] scsi0 : ata_piix > [ 0.643459] scsi1 : ata_piix > [ 0.645607] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 > irq 14 > [ 0.645927] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 > irq 15 > [ 0.820579] ata1.00: ATAPI: MATSHITADVD-R UJ-857D, KCV9, max > UDMA/66 > [ 0.860552] ata1.00: configured for UDMA/66 > [ 1.033370] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-857D > KCV9 PQ: 0 ANSI: 5 > [ 1.038018] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda > tray > [ 1.046742] Uniform CD-ROM driver Revision: 3.20 > [ 1.055628] sr 0:0:0:0: Attached scsi CD-ROM sr0 > [ 1.064347] sr 0:0:0:0: Attached scsi generic sg0 type 5 > [ 1.072665] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) > -> IRQ 19 > [ 1.081012] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ] > [ 1.240015] ata_piix 0000:00:1f.2: setting latency timer to 64 > [ 1.248352] scsi2 : ata_piix > [ 1.256649] scsi3 : ata_piix > [ 1.268272] ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma > 0x40a0 irq 19 > [ 1.276462] ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma > 0x40a8 irq 19 > [ 1.470509] ata3.01: ATA-8: FUJITSU MHW2120BH, 00810013, max UDMA/100 > [ 1.478586] ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth > 0/32) > [ 1.520516] ata3.01: configured for UDMA/100 > [ 1.691229] scsi 2:0:1:0: Direct-Access ATA FUJITSU MHW2120B > 0081 PQ: 0 ANSI: 5 > [ 1.699977] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors: > (120 GB/111 GiB) > [ 1.708573] sd 2:0:1:0: [sda] Write Protect is off > [ 1.717066] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 > [ 1.725483] sd 2:0:1:0: [sda] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > [ 1.734094] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors: > (120 GB/111 GiB) > [ 1.742618] sd 2:0:1:0: [sda] Write Protect is off > [ 1.751019] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 > [ 1.759358] sd 2:0:1:0: [sda] Write cache: enabled, read cache: > enabled, doesn't support DPO or FUA > [ 1.767909] sda: sda1 sda2 > [ 1.777068] sd 2:0:1:0: [sda] Attached SCSI disk > [ 1.785728] sd 2:0:1:0: Attached scsi generic sg1 type 0 > [ 1.794189] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) > Driver > [ 1.802702] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) > -> IRQ 23 > [ 1.811342] ehci_hcd 0000:00:1d.7: setting latency timer to 64 > [ 1.819810] ehci_hcd 0000:00:1d.7: EHCI Host Controller > [ 1.828288] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned > bus number 1 > [ 1.840774] ehci_hcd 0000:00:1d.7: debug port 1 > [ 1.849145] ehci_hcd 0000:00:1d.7: cache line size of 32 is not > supported > [ 1.857684] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x50405400 > [ 1.880009] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > [ 1.888654] usb usb1: configuration #1 chosen from 1 choice > [ 1.897201] hub 1-0:1.0: USB hub found > [ 1.905706] hub 1-0:1.0: 8 ports detected > [ 1.914792] usbcore: registered new interface driver usblcd > [ 1.923460] usbcore: registered new interface driver usbled > [ 1.932197] PNP: No PS/2 controller found. Probing ports directly. > [ 1.941486] i8042.c: No controller found. > [ 1.960234] mice: PS/2 mouse device common for all mice > [ 1.969192] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) > initialised: dm-devel@redhat.com > [ 1.977661] EDAC MC: Ver: 2.1.0 Nov 14 2008 > [ 1.986518] cpuidle: using governor ladder > [ 1.994982] cpuidle: using governor menu > [ 2.005315] usbcore: registered new interface driver hiddev > [ 2.013778] usbcore: registered new interface driver usbhid > [ 2.022059] usbhid: v2.6:USB HID core driver > [ 2.030387] Advanced Linux Sound Architecture Driver Version > 1.0.18rc3. > [ 2.038885] ALSA device list: > [ 2.047231] No soundcards found. > [ 2.055827] oprofile: using NMI interrupt. > [ 2.064503] IPVS: Registered protocols (TCP, AH, ESP) > [ 2.073024] IPVS: Connection hash table configured (size=4096, > memory=32Kbytes) > [ 2.081548] IPVS: ipvs loaded. > [ 2.090149] Initializing XFRM netlink socket > [ 2.098360] NET: Registered protocol family 17 > [ 2.106530] NET: Registered protocol family 15 > [ 2.114611] Using IPI No-Shortcut mode > [ 2.160139] kjournald starting. Commit interval 5 seconds > [ 2.160149] EXT3-fs: mounted filesystem with ordered data mode. > [ 2.160180] VFS: Mounted root (ext3 filesystem) readonly. > [ 2.160485] Freeing unused kernel memory: 404k freed > [ 2.370013] usb 1-4: new high speed USB device using ehci_hcd and > address 3 > [ 2.520992] usb 1-4: configuration #1 chosen from 1 choice > [ 2.803163] SELinux: 8192 avtab hash slots, 173318 rules. > [ 2.916909] SELinux: 8192 avtab hash slots, 173318 rules. > [ 3.121050] SELinux: 7 users, 9 roles, 3230 types, 100 bools, 1 > sens, 256 cats > [ 3.128919] SELinux: 73 classes, 173318 rules > [ 3.144236] SELinux: Completing initialization. > [ 3.152028] SELinux: Setting up existing superblocks. > [ 3.187600] SELinux: initialized (dev sda1, type ext3), uses xattr > [ 3.338652] SELinux: initialized (dev usbfs, type usbfs), uses > genfs_contexts > [ 3.346547] SELinux: initialized (dev selinuxfs, type selinuxfs), > uses genfs_contexts > [ 3.354544] SELinux: initialized (dev mqueue, type mqueue), uses > transition SIDs > [ 3.362578] SELinux: initialized (dev hugetlbfs, type hugetlbfs), > uses genfs_contexts > [ 3.370625] SELinux: initialized (dev devpts, type devpts), uses > transition SIDs > [ 3.378643] SELinux: initialized (dev inotifyfs, type inotifyfs), > uses genfs_contexts > [ 3.386818] SELinux: initialized (dev tmpfs, type tmpfs), uses > transition SIDs > [ 3.394979] SELinux: initialized (dev anon_inodefs, type > anon_inodefs), uses genfs_contexts > [ 3.403391] SELinux: initialized (dev pipefs, type pipefs), uses task > SIDs > [ 3.411738] SELinux: initialized (dev debugfs, type debugfs), uses > genfs_contexts > [ 3.420100] SELinux: initialized (dev sockfs, type sockfs), uses task > SIDs > [ 3.428408] SELinux: initialized (dev proc, type proc), uses > genfs_contexts > [ 3.436592] SELinux: initialized (dev bdev, type bdev), uses > genfs_contexts > [ 3.444492] SELinux: initialized (dev rootfs, type rootfs), uses > genfs_contexts > [ 3.452457] SELinux: initialized (dev sysfs, type sysfs), uses > genfs_contexts > [ 3.495760] type=1403 audit(1226705963.490:2): policy loaded > auid=4294967295 ses=4294967295 > [ 4.184266] SELinux: initialized (dev tmpfs, type tmpfs), uses > transition SIDs > [ 4.355686] SELinux: initialized (dev tmpfs, type tmpfs), uses > transition SIDs > [ 4.368701] SELinux: initialized (dev tmpfs, type tmpfs), uses > transition SIDs > [ 9.900482] SELinux: initialized (dev tmpfs, type tmpfs), uses > transition SIDs > [ 10.829515] ACPI: SSDT 3FEB8C10, 02AE (r1 APPLE Cpu0Ist 3000 > INTL 20050309) > [ 10.848402] ACPI: SSDT 3FEB8910, 02A0 (r1 APPLE Cpu0Cst 3001 > INTL 20050309) > [ 10.858321] Monitor-Mwait will be used to enter C-1 state > [ 10.867338] Monitor-Mwait will be used to enter C-2 state > [ 10.876125] Monitor-Mwait will be used to enter C-3 state > [ 10.884784] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) > [ 10.893341] processor ACPI_CPU:00: registered as cooling_device0 > [ 10.902062] ACPI: Processor [CPU0] (supports 8 throttling states) > [ 10.910983] input: Power Button (FF) as /class/input/input1 > [ 10.936619] Marking TSC unstable due to TSC halts in idle > [ 10.972663] ACPI: Power Button (FF) [PWRF] > [ 10.984596] ACPI: SSDT 3FEB8F10, 0087 (r1 APPLE Cpu1Ist 3000 > INTL 20050309) > [ 10.994451] ACPI: SSDT 3FEB7F10, 0085 (r1 APPLE Cpu1Cst 3000 > INTL 20050309) > [ 11.008804] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) > [ 11.020792] processor ACPI_CPU:01: registered as cooling_device1 > [ 11.031546] ACPI: Processor [CPU1] (supports 8 throttling states) > [ 11.119331] ACPI Warning (nspredef-0858): \_SB_.BAT0._BIF: Return > Package type mismatch at index 9 - found Buffer, expected String > [20080926] > [ 11.137971] power_supply BAT0: uevent > [ 11.147121] power_supply BAT0: No power supply yet > [ 11.156247] power_supply BAT0: power_supply_changed > [ 11.165416] power_supply BAT0: power_supply_changed_work > [ 11.234034] ACPI: Battery Slot [BAT0] (battery present) > [ 11.243095] power_supply ADP1: uevent > [ 11.253028] power_supply ADP1: No power supply yet > [ 11.263293] power_supply ADP1: power_supply_changed > [ 11.273053] ACPI: AC Adapter [ADP1] (on-line) > [ 11.282814] input: Lid Switch as /class/input/input2 > [ 11.292548] power_supply ADP1: power_supply_changed_work > [ 11.301924] power_supply ADP1: power_supply_update_gen_leds 1 > [ 11.312016] power_supply ADP1: uevent > [ 11.320928] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 > [ 11.324526] ath9k: 0.1 > [ 11.324568] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> > IRQ 17 > [ 11.324580] ath9k 0000:03:00.0: setting latency timer to 64 > [ 11.354411] power_supply ADP1: Static prop TYPE=Mains > [ 11.362728] power_supply ADP1: 1 dynamic props > [ 11.376403] power_supply ADP1: prop ONLINE=1 > [ 11.412192] uhci_hcd: USB Universal Host Controller Interface driver > [ 11.425703] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) > -> IRQ 23 > [ 11.438977] uhci_hcd 0000:00:1d.0: setting latency timer to 64 > [ 11.451921] uhci_hcd 0000:00:1d.0: UHCI Host Controller > [ 11.464900] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned > bus number 2 > [ 11.477767] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080 > [ 11.490880] usb usb2: configuration #1 chosen from 1 choice > [ 11.492576] phy0: Selected rate control algorithm > 'ath9k_rate_control' > [ 11.499406] power_supply BAT0: power_supply_update_bat_leds 4 > [ 11.499426] power_supply BAT0: uevent > [ 11.499428] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 > [ 11.499433] power_supply BAT0: Static prop TYPE=Battery > [ 11.499435] power_supply BAT0: 12 dynamic props > [ 11.499438] power_supply BAT0: prop STATUS=Full > [ 11.499441] power_supply BAT0: prop PRESENT=1 > [ 11.499445] power_supply BAT0: prop TECHNOLOGY=Unknown > [ 11.499449] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 > [ 11.499451] power_supply BAT0: prop VOLTAGE_NOW=12425000 > [ 11.499455] power_supply BAT0: prop CURRENT_NOW=0 > [ 11.499458] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 > [ 11.499461] power_supply BAT0: prop ENERGY_FULL=50780000 > [ 11.499464] power_supply BAT0: prop ENERGY_NOW=48520000 > [ 11.499468] power_supply BAT0: prop MODEL_NAME=ASMB012 > [ 11.499471] power_supply BAT0: prop MANUFACTURER=SMPN012 > [ 11.499474] power_supply BAT0: prop SERIAL_NUMBER= > [ 11.500395] Registered led device: ath9k-phy0:radio > [ 11.500443] Registered led device: ath9k-phy0:assoc > [ 11.500491] Registered led device: ath9k-phy0:tx > [ 11.500538] Registered led device: ath9k-phy0:rx > [ 11.501380] phy0: Atheros 5416: mem=0xf87a0000, irq=17 > [ 11.659873] hub 2-0:1.0: USB hub found > [ 11.665853] hub 2-0:1.0: 2 ports detected > [ 11.666147] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) > -> IRQ 19 > [ 11.666158] uhci_hcd 0000:00:1d.1: setting latency timer to 64 > [ 11.666161] uhci_hcd 0000:00:1d.1: UHCI Host Controller > [ 11.666220] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned > bus number 3 > [ 11.666256] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060 > [ 11.666436] usb usb3: configuration #1 chosen from 1 choice > [ 11.666501] hub 3-0:1.0: USB hub found > [ 11.666521] hub 3-0:1.0: 2 ports detected > [ 11.666760] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) > -> IRQ 18 > [ 11.666768] uhci_hcd 0000:00:1d.2: setting latency timer to 64 > [ 11.666771] uhci_hcd 0000:00:1d.2: UHCI Host Controller > [ 11.666835] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned > bus number 4 > [ 11.666880] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040 > [ 11.667043] usb usb4: configuration #1 chosen from 1 choice > [ 11.667114] hub 4-0:1.0: USB hub found > [ 11.667126] hub 4-0:1.0: 2 ports detected > [ 11.667374] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) > -> IRQ 16 > [ 11.667382] uhci_hcd 0000:00:1d.3: setting latency timer to 64 > [ 11.667385] uhci_hcd 0000:00:1d.3: UHCI Host Controller > [ 11.667445] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned > bus number 5 > [ 11.667489] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020 > [ 11.667678] usb usb5: configuration #1 chosen from 1 choice > [ 11.667742] hub 5-0:1.0: USB hub found > [ 11.667754] hub 5-0:1.0: 2 ports detected > [ 11.668209] ACPI: Lid Switch [LID0] > [ 11.668326] input: Power Button (CM) as /class/input/input3 > [ 11.855903] ACPI: Power Button (CM) [PWRB] > [ 11.862529] input: Sleep Button (CM) as /class/input/input4 > [ 11.897478] ACPI: Sleep Button (CM) [SLPB] > [ 11.947016] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) > -> IRQ 22 > [ 11.953941] HDA Intel 0000:00:1b.0: setting latency timer to 64 > [ 11.978662] firewire_ohci 0000:0c:03.0: PCI INT A -> GSI 19 (level, > low) -> IRQ 19 > [ 12.022935] uvcvideo: Found UVC 1.00 device Built-in iSight > (05ac:8501) > [ 12.032616] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : > -32 (exp. 26). > [ 12.042570] input: Built-in iSight as /class/input/input5 > [ 12.042610] usb 2-2: new full speed USB device using uhci_hcd and > address 2 > [ 12.059396] hda_codec: STAC922x, Apple subsys_id=106b1e00 > [ 12.070735] usbcore: registered new interface driver uvcvideo > [ 12.078879] USB Video Class driver (v0.1.0) > [ 12.092523] firewire_ohci: Added fw-ohci device 0000:0c:03.0, OHCI > version 1.10 > [ 12.256897] usb 2-2: configuration #1 chosen from 1 choice > [ 12.282940] input: Apple Computer Apple Internal Keyboard / Trackpad > as /class/input/input6 > [ 12.320156] apple 0003:05AC:021A.0001: input: USB HID v1.11 Keyboard > [Apple Computer Apple Internal Keyboard / Trackpad] on > usb-0000:00:1d.0-2/input0 > [ 12.341951] SELinux: initialized (dev tmpfs, type tmpfs), uses > transition SIDs > [ 12.365052] input: Apple Computer Apple Internal Keyboard / Trackpad > as /class/input/input7 > [ 12.419321] apple 0003:05AC:021A.0002: input: USB HID v1.11 Device > [Apple Computer Apple Internal Keyboard / Trackpad] on > usb-0000:00:1d.0-2/input2 > [ 12.447937] appletouch: Geyser mode initialized. > [ 12.469393] input: appletouch as /class/input/input8 > [ 12.484792] usbcore: registered new interface driver appletouch > [ 12.497510] applesmc: Apple MacBook Pro detected: > [ 12.508263] applesmc: - Model with accelerometer > [ 12.518950] applesmc: - Model with light sensors and backlight > [ 12.529972] applesmc: - Model with 12 temperature sensors > [ 12.542254] applesmc: device has already been initialized (0xe0, > 0x00). > [ 12.553133] applesmc: device successfully initialized. > [ 12.564722] applesmc: 2 fans found. > [ 12.571160] usb 4-2: new full speed USB device using uhci_hcd and > address 2 > [ 12.588267] input: applesmc as /class/input/input9 > [ 12.600311] firewire_core: created device fw0: GUID 0019e3fffe2ad87e, > S800 > [ 12.627058] Registered led device: smc::kbd_backlight > [ 12.638345] applesmc: driver successfully loaded. > [ 12.722988] Linux agpgart interface v0.103 > [ 12.776238] usb 4-2: configuration #1 chosen from 1 choice > [ 12.797081] generic-usb 0003:05AC:8240.0003: hiddev0: USB HID v1.11 > Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2/input0 > [ 12.820185] [drm] Initialized drm 1.1.0 20060810 > [ 12.862647] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ > 16 > [ 12.873995] pci 0000:01:00.0: setting latency timer to 64 > [ 12.885470] [drm] Initialized radeon 1.29.0 20080528 on minor 0 > [ 12.954269] usb 5-1: new full speed USB device using uhci_hcd and > address 2 > [ 13.050730] ip_tables: (C) 2000-2006 Netfilter Core Team > [ 13.161914] nf_conntrack version 0.5.0 (16142 buckets, 64568 max) > [ 13.173667] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. > Please use > [ 13.185007] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack > module option or > [ 13.196339] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. > [ 13.196524] usb 5-1: configuration #1 chosen from 1 choice > [ 13.236747] drivers/hid/usbhid/hid-core.c: couldn't find an input > interrupt endpoint > [ 13.253995] arp_tables: (C) 2002 David S. Miller > [ 13.315123] ieee80211_crypt: registered algorithm 'NULL' > [ 13.357786] ieee80211: 802.11 data/management/control stack, > git-1.1.13 > [ 13.369128] ieee80211: Copyright (C) 2004-2005 Intel Corporation > <jketreno@linux.intel.com> > [ 13.396245] ieee80211_crypt: registered algorithm 'TKIP' > [ 13.471701] usbcore: registered new interface driver isight_firmware > [ 13.525042] ipmi message handler version 39.2 > [ 13.551760] IPMI Watchdog: driver initialized > [ 13.776369] Adding 2988360k swap on /dev/sda2. Priority:-1 extents:1 > across:2988360k > [ 14.172515] EXT3 FS on sda1, internal journal > [ 17.501470] warning: `avahi-daemon' uses 32-bit capabilities (legacy > support in use) > [ 18.072715] applesmc: light sensor data length set to 6 > [ 19.427621] usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt > 64 rq 0 len 0 ret -84 > [ 19.452450] Bluetooth: Core ver 2.13 > [ 19.456615] NET: Registered protocol family 31 > [ 19.456619] Bluetooth: HCI device and connection manager initialized > [ 19.456625] Bluetooth: HCI socket layer initialized > [ 19.492652] Bluetooth: L2CAP ver 2.11 > [ 19.492657] Bluetooth: L2CAP socket layer initialized > [ 19.531701] Bluetooth: RFCOMM socket layer initialized > [ 19.531732] Bluetooth: RFCOMM TTY layer initialized > [ 19.531736] Bluetooth: RFCOMM ver 1.10 > [ 19.549691] Bluetooth: SCO (Voice Link) ver 0.6 > [ 19.549696] Bluetooth: SCO socket layer initialized > [ 19.740179] usb 5-1: USB disconnect, address 2 > [ 19.850721] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > [ 19.850727] Bluetooth: BNEP filters: protocol multicast > [ 20.023468] usb 5-1: new full speed USB device using uhci_hcd and > address 3 > [ 20.230853] usb 5-1: configuration #1 chosen from 1 choice > [ 20.292586] Bluetooth: Generic Bluetooth USB driver ver 0.3 > [ 20.292774] usbcore: registered new interface driver btusb > [ 26.209069] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 > [ 26.215644] input: justinmattock___s mouse #1 as /class/input/input10 > [ 26.243603] generic-bluetooth 0005:0000:0000.0005: input: BLUETOOTH > HID v0.00 Mouse [justinmattock___s mouse #1] on 00:17:F2:B4:BC:F5 > [ 32.303010] [drm] Setting GART location based on new memory map > [ 32.304544] [drm] Loading R500 Microcode > [ 32.304597] [drm] Num pipes: 1 > [ 32.304610] [drm] writeback test succeeded in 1 usecs > [ 82.162134] wlan0: authenticate with AP 00:1e:2a:00:67:f0 > [ 82.164163] wlan0: authenticated > [ 82.164169] wlan0: associate with AP 00:1e:2a:00:67:f0 > [ 82.166518] wlan0: RX AssocResp from 00:1e:2a:00:67:f0 (capab=0x431 > status=0 aid=33) > [ 82.166523] wlan0: associated > [ 1926.692564] CE: hpet increasing min_delta_ns to 15000 nsec > [ 6017.062769] power_supply ADP1: uevent > [ 6017.062775] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 > [ 6017.062787] power_supply ADP1: Static prop TYPE=Mains > [ 6017.062793] power_supply ADP1: 1 dynamic props > [ 6017.062799] power_supply ADP1: prop ONLINE=0 > [ 6017.302516] power_supply BAT0: uevent > [ 6017.302522] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 > [ 6017.302535] power_supply BAT0: Static prop TYPE=Battery > [ 6017.302541] power_supply BAT0: 12 dynamic props > [ 6017.302547] power_supply BAT0: prop STATUS=Discharging > [ 6017.302554] power_supply BAT0: prop PRESENT=1 > [ 6017.302561] power_supply BAT0: prop TECHNOLOGY=Unknown > [ 6017.302570] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 > [ 6017.302577] power_supply BAT0: prop VOLTAGE_NOW=12423000 > [ 6017.302584] power_supply BAT0: prop CURRENT_NOW=0 > [ 6017.302592] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 > [ 6017.302600] power_supply BAT0: prop ENERGY_FULL=50780000 > [ 6017.302607] power_supply BAT0: prop ENERGY_NOW=48520000 > [ 6017.302614] power_supply BAT0: prop MODEL_NAME=ASMB012 > [ 6017.302621] power_supply BAT0: prop MANUFACTURER=SMPN012 > [ 6017.302628] power_supply BAT0: prop SERIAL_NUMBER= > [ 6064.195248] power_supply ADP1: uevent > [ 6064.195254] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 > [ 6064.195265] power_supply ADP1: Static prop TYPE=Mains > [ 6064.195270] power_supply ADP1: 1 dynamic props > [ 6064.195276] power_supply ADP1: prop ONLINE=1 > [ 6064.442624] power_supply BAT0: uevent > [ 6064.442630] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 > [ 6064.442643] power_supply BAT0: Static prop TYPE=Battery > [ 6064.442649] power_supply BAT0: 12 dynamic props > [ 6064.442655] power_supply BAT0: prop STATUS=Full > [ 6064.442662] power_supply BAT0: prop PRESENT=1 > [ 6064.442669] power_supply BAT0: prop TECHNOLOGY=Unknown > [ 6064.442678] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 > [ 6064.442686] power_supply BAT0: prop VOLTAGE_NOW=12118000 > [ 6064.442693] power_supply BAT0: prop CURRENT_NOW=23969000 > [ 6064.442700] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 > [ 6064.442708] power_supply BAT0: prop ENERGY_FULL=50780000 > [ 6064.442715] power_supply BAT0: prop ENERGY_NOW=48510000 > [ 6064.442722] power_supply BAT0: prop MODEL_NAME=ASMB012 > [ 6064.442729] power_supply BAT0: prop MANUFACTURER=SMPN012 > [ 6064.442736] power_supply BAT0: prop SERIAL_NUMBER= > [ 6066.464031] power_supply BAT0: uevent > [ 6066.464037] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 > [ 6066.464049] power_supply BAT0: Static prop TYPE=Battery > [ 6066.464055] power_supply BAT0: 12 dynamic props > [ 6066.464061] power_supply BAT0: prop STATUS=Charging > [ 6066.464068] power_supply BAT0: prop PRESENT=1 > [ 6066.464075] power_supply BAT0: prop TECHNOLOGY=Unknown > [ 6066.464087] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 > [ 6066.464095] power_supply BAT0: prop VOLTAGE_NOW=12373000 > [ 6066.464103] power_supply BAT0: prop CURRENT_NOW=4058000 > [ 6066.464111] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 > [ 6066.464119] power_supply BAT0: prop ENERGY_FULL=50780000 > [ 6066.464127] power_supply BAT0: prop ENERGY_NOW=48510000 > [ 6066.464135] power_supply BAT0: prop MODEL_NAME=ASMB012 > [ 6066.464143] power_supply BAT0: prop MANUFACTURER=SMPN012 > [ 6066.464150] power_supply BAT0: prop SERIAL_NUMBER= > [ 6527.737472] ACPI: EC: GPE storm detected, transactions will use > polling mode > [ 8255.325198] power_supply BAT0: uevent > [ 8255.325203] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 > [ 8255.325214] power_supply BAT0: Static prop TYPE=Battery > [ 8255.325219] power_supply BAT0: 12 dynamic props > [ 8255.325225] power_supply BAT0: prop STATUS=Full > [ 8255.325232] power_supply BAT0: prop PRESENT=1 > [ 8255.325240] power_supply BAT0: prop TECHNOLOGY=Unknown > [ 8255.325250] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 > [ 8255.325258] power_supply BAT0: prop VOLTAGE_NOW=12603000 > [ 8255.325265] power_supply BAT0: prop CURRENT_NOW=113000 > [ 8255.325273] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 > [ 8255.325281] power_supply BAT0: prop ENERGY_FULL=50780000 > [ 8255.325289] power_supply BAT0: prop ENERGY_NOW=51080000 > [ 8255.325296] power_supply BAT0: prop MODEL_NAME=ASMB012 > [ 8255.325303] power_supply BAT0: prop MANUFACTURER=SMPN012 > [ 8255.325311] power_supply BAT0: prop SERIAL_NUMBER= > > I thought it was because I disconnected the laptop and moved > it into another area, but doesn't seem to be the case. ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: ACPI: EC: GPE storm detected, transactions will use polling mode 2008-11-15 6:43 ` ACPI: EC: GPE storm detected, transactions will use polling mode Andrew Morton @ 2008-11-15 6:56 ` Justin P. Mattock 2008-11-15 9:23 ` Alexey Starikovskiy 1 sibling, 0 replies; 15+ messages in thread From: Justin P. Mattock @ 2008-11-15 6:56 UTC (permalink / raw) To: Andrew Morton; +Cc: Linux Kernel Mailing List, linux-acpi On Fri, 2008-11-14 at 22:43 -0800, Andrew Morton wrote: > (cc linux-acpi) > > On Fri, 14 Nov 2008 20:16:17 -0800 "Justin P. Mattock" <justinmattock@gmail.com> wrote: > > > just pulled the latest git today and am now noticing > > the lovely gpe storm being triggered.(dmesg below); > > Are any other effects observeable? No. system runs fine, even when this occurs. > > I assume that 2.6.27 didn't do this. >From what I remember 2.6.28-rc4 was released I think on last Saturday (or whenever it was released); I pulled the next day, then ran the system until today, without receiving this message, then pulling late afternoon today Friday (was when I saw this). > > > [ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00 > > [ 0.000000] Linux version 2.6.28-rc4-00322-g58e20d8 (root@LiNuX) (gcc > > version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Fri Nov 14 15:11:30 PST > > 2008 > > [ 0.000000] KERNEL supported cpus: > > [ 0.000000] Intel GenuineIntel > > [ 0.000000] AMD AuthenticAMD > > [ 0.000000] NSC Geode by NSC > > [ 0.000000] Cyrix CyrixInstead > > [ 0.000000] Centaur CentaurHauls > > [ 0.000000] Transmeta GenuineTMx86 > > [ 0.000000] Transmeta TransmetaCPU > > [ 0.000000] UMC UMC UMC UMC > > [ 0.000000] BIOS-provided physical RAM map: > > [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > > [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 > > (reserved) > > [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 > > (reserved) > > [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f0ea000 (usable) > > [ 0.000000] BIOS-e820: 000000003f0ea000 - 000000003f2eb000 (ACPI > > NVS) > > [ 0.000000] BIOS-e820: 000000003f2eb000 - 000000003febe000 (ACPI > > data) > > [ 0.000000] BIOS-e820: 000000003febe000 - 000000003feef000 (ACPI > > NVS) > > [ 0.000000] BIOS-e820: 000000003feef000 - 000000003ff00000 (ACPI > > data) > > [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 > > (reserved) > > [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 > > (reserved) > > [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 > > (reserved) > > [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 > > (reserved) > > [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 > > (reserved) > > [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 > > (reserved) > > [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 > > (reserved) > > [ 0.000000] DMI 2.4 present. > > [ 0.000000] last_pfn = 0x3f0ea max_arch_pfn = 0x100000 > > [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new > > 0x7010600070106 > > [ 0.000000] Scanning 2 areas for low memory corruption > > [ 0.000000] modified physical RAM map: > > [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) > > [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) > > [ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable) > > [ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved) > > [ 0.000000] modified: 0000000000010000 - 0000000000092c00 (usable) > > [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) > > [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) > > [ 0.000000] modified: 0000000000100000 - 000000003f0ea000 (usable) > > [ 0.000000] modified: 000000003f0ea000 - 000000003f2eb000 (ACPI NVS) > > [ 0.000000] modified: 000000003f2eb000 - 000000003febe000 (ACPI > > data) > > [ 0.000000] modified: 000000003febe000 - 000000003feef000 (ACPI NVS) > > [ 0.000000] modified: 000000003feef000 - 000000003ff00000 (ACPI > > data) > > [ 0.000000] modified: 000000003ff00000 - 0000000040000000 (reserved) > > [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) > > [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) > > [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) > > [ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved) > > [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) > > [ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved) > > [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-16000 > > [ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE ) > > [ 0.000000] ACPI: XSDT 3FEFD1C0, 0074 (r1 APPLE Apple00 A5 > > 1000013) > > [ 0.000000] ACPI: FACP 3FEFB000, 00F4 (r3 APPLE Apple00 A5 > > Loki 5F) > > [ 0.000000] ACPI: DSDT 3FEF0000, 48D1 (r1 APPLE MacBookP 20002 > > INTL 20050309) > > [ 0.000000] ACPI: FACS 3FEC0000, 0040 > > [ 0.000000] ACPI: HPET 3FEFA000, 0038 (r1 APPLE Apple00 1 > > Loki 5F) > > [ 0.000000] ACPI: APIC 3FEF9000, 0068 (r1 APPLE Apple00 1 > > Loki 5F) > > [ 0.000000] ACPI: MCFG 3FEF8000, 003C (r1 APPLE Apple00 1 > > Loki 5F) > > [ 0.000000] ACPI: ASF! 3FEF7000, 00A0 (r32 APPLE Apple00 1 > > Loki 5F) > > [ 0.000000] ACPI: SBST 3FEF6000, 0030 (r1 APPLE Apple00 1 > > Loki 5F) > > [ 0.000000] ACPI: ECDT 3FEF5000, 0053 (r1 APPLE Apple00 1 > > Loki 5F) > > [ 0.000000] ACPI: SSDT 3FEEF000, 04DC (r1 APPLE CpuPm 3000 > > INTL 20050309) > > [ 0.000000] ACPI: SSDT 3FEBD000, 064F (r1 SataRe SataPri 1000 > > INTL 20050309) > > [ 0.000000] ACPI: SSDT 3FEBC000, 069C (r1 SataRe SataSec 1000 > > INTL 20050309) > > [ 0.000000] ACPI: DMI detected: Apple > > [ 0.000000] ACPI: Local APIC address 0xfee00000 > > [ 0.000000] 120MB HIGHMEM available. > > [ 0.000000] 887MB LOWMEM available. > > [ 0.000000] mapped low ram: 0 - 377fe000 > > [ 0.000000] low ram: 00000000 - 377fe000 > > [ 0.000000] bootmap 00012000 - 00018f00 > > [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - > > 00377fe000] > > [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> > > [0000000000 - 0000001000] > > [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> > > [0000001000 - 0000002000] > > [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> > > [0000006000 - 0000007000] > > [ 0.000000] #3 [0000100000 - 000062bbe4] TEXT DATA BSS ==> > > [0000100000 - 000062bbe4] > > [ 0.000000] #4 [000062c000 - 000062f000] INIT_PG_TABLE ==> > > [000062c000 - 000062f000] > > [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> > > [000009fc00 - 0000100000] > > [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> > > [0000010000 - 0000012000] > > [ 0.000000] #7 [0000012000 - 0000019000] BOOTMAP ==> > > [0000012000 - 0000019000] > > [ 0.000000] Zone PFN ranges: > > [ 0.000000] DMA 0x00000000 -> 0x00001000 > > [ 0.000000] Normal 0x00001000 -> 0x000377fe > > [ 0.000000] HighMem 0x000377fe -> 0x0003f0ea > > [ 0.000000] Movable zone start PFN for each node > > [ 0.000000] early_node_map[4] active PFN ranges > > [ 0.000000] 0: 0x00000000 -> 0x00000002 > > [ 0.000000] 0: 0x00000006 -> 0x00000007 > > [ 0.000000] 0: 0x00000010 -> 0x00000092 > > [ 0.000000] 0: 0x00000100 -> 0x0003f0ea > > [ 0.000000] On node 0 totalpages: 258159 > > [ 0.000000] free_area_init_node: node 0, pgdat c051f980, node_mem_map > > c1000000 > > [ 0.000000] DMA zone: 32 pages used for memmap > > [ 0.000000] DMA zone: 0 pages reserved > > [ 0.000000] DMA zone: 3941 pages, LIFO batch:0 > > [ 0.000000] Normal zone: 1744 pages used for memmap > > [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 > > [ 0.000000] HighMem zone: 242 pages used for memmap > > [ 0.000000] HighMem zone: 30714 pages, LIFO batch:7 > > [ 0.000000] Movable zone: 0 pages used for memmap > > [ 0.000000] Using APIC driver default > > [ 0.000000] ACPI: PM-Timer IO Port: 0x408 > > [ 0.000000] ACPI: Local APIC address 0xfee00000 > > [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > > [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) > > [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI > > 0-23 > > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high > > level) > > [ 0.000000] ACPI: IRQ0 used by override. > > [ 0.000000] ACPI: IRQ2 used by override. > > [ 0.000000] ACPI: IRQ9 used by override. > > [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs > > [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 > > [ 0.000000] Using ACPI (MADT) for SMP configuration information > > [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs > > [ 0.000000] PM: Registered nosave memory: 0000000000002000 - > > 0000000000006000 > > [ 0.000000] PM: Registered nosave memory: 0000000000007000 - > > 0000000000010000 > > [ 0.000000] PM: Registered nosave memory: 0000000000092000 - > > 00000000000a0000 > > [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - > > 00000000000e0000 > > [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - > > 0000000000100000 > > [ 0.000000] Allocating PCI resources starting at 50000000 (gap: > > 40000000:b0000000) > > [ 0.000000] PERCPU: Allocating 40960 bytes of per cpu data > > [ 0.000000] NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1 > > [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. > > Total pages: 256141 > > [ 0.000000] Kernel command line: > > BOOT_IMAGE=/boot/vmlinuz-2.6.28-rc4-00322-g58e20d8 root=/dev/sda1 ro > > vga=790 debug pnpacpi=off pci=routeirq audit=1 selinux=1 enforcing=1 > > [ 0.000000] audit: enabled (after initialization) > > [ 0.000000] Enabling fast FPU save and restore... done. > > [ 0.000000] Enabling unmasked SIMD FPU exception support... done. > > [ 0.000000] Initializing CPU#0 > > [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) > > [ 0.000000] Extended CMOS year: 2000 > > [ 0.000000] TSC: PIT calibration matches PMTIMER. 1 loops > > [ 0.000000] Detected 2161.244 MHz processor. > > [ 0.010000] Console: colour dummy device 80x25 > > [ 0.010000] console [tty0] enabled > > [ 0.010000] Dentry cache hash table entries: 131072 (order: 7, 524288 > > bytes) > > [ 0.010000] Inode-cache hash table entries: 65536 (order: 6, 262144 > > bytes) > > [ 0.010000] Scanning for low memory corruption every 60 seconds > > [ 0.010000] Memory: 1017932k/1033128k available (2803k kernel code, > > 14344k reserved, 1506k data, 404k init, 123824k highmem) > > [ 0.010000] virtual kernel memory layout: > > [ 0.010000] fixmap : 0xfff82000 - 0xfffff000 ( 500 kB) > > [ 0.010000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) > > [ 0.010000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) > > [ 0.010000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) > > [ 0.010000] .init : 0xc053c000 - 0xc05a1000 ( 404 kB) > > [ 0.010000] .data : 0xc03bce25 - 0xc05357c4 (1506 kB) > > [ 0.010000] .text : 0xc0100000 - 0xc03bce25 (2803 kB) > > [ 0.010000] Checking if this processor honours the WP bit even in > > supervisor mode...Ok. > > [ 0.010000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, > > CPUs=2, Nodes=1 > > [ 0.010000] hpet clockevent registered > > [ 0.010000] HPET: 3 timers in total, 0 timers will be used for > > per-cpu timer > > [ 0.010000] Calibrating delay loop (skipped), value calculated using > > timer frequency.. 4322.48 BogoMIPS (lpj=21612440) > > [ 0.010000] Security Framework initialized > > [ 0.010000] SELinux: Initializing. > > [ 0.010000] SELinux: Starting in enforcing mode > > [ 0.010000] Failure registering Root Plug module with the kernel > > [ 0.010000] Mount-cache hash table entries: 512 > > [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K > > [ 0.010000] CPU: L2 cache: 4096K > > [ 0.010000] CPU: Physical Processor ID: 0 > > [ 0.010000] CPU: Processor Core ID: 0 > > [ 0.010000] Intel machine check architecture supported. > > [ 0.010000] Intel machine check reporting enabled on CPU#0. > > [ 0.010000] using mwait in idle threads. > > [ 0.010000] Checking 'hlt' instruction... OK. > > [ 0.040982] ACPI: Core revision 20080926 > > [ 0.059747] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > > [ 0.159768] CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz > > stepping 06 > > [ 0.160000] Booting processor 1 APIC 0x1 ip 0x6000 > > [ 0.010000] Initializing CPU#1 > > [ 0.010000] Calibrating delay using timer specific routine.. 4322.52 > > BogoMIPS (lpj=21612624) > > [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K > > [ 0.010000] CPU: L2 cache: 4096K > > [ 0.010000] CPU: Physical Processor ID: 0 > > [ 0.010000] CPU: Processor Core ID: 1 > > [ 0.010000] Intel machine check architecture supported. > > [ 0.010000] Intel machine check reporting enabled on CPU#1. > > [ 0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new > > 0x7010600070106 > > [ 0.311697] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz > > stepping 06 > > [ 0.311729] checking TSC synchronization [CPU#0 -> CPU#1]: passed. > > [ 0.320021] Brought up 2 CPUs > > [ 0.320026] Total of 2 processors activated (8645.01 BogoMIPS). > > [ 0.320092] CPU0 attaching sched-domain: > > [ 0.320097] domain 0: span 0-1 level MC > > [ 0.320101] groups: 0 1 > > [ 0.320109] CPU1 attaching sched-domain: > > [ 0.320113] domain 0: span 0-1 level MC > > [ 0.320117] groups: 1 0 > > [ 0.320199] net_namespace: 540 bytes > > [ 0.320199] Booting paravirtualized kernel on bare hardware > > [ 0.320317] NET: Registered protocol family 16 > > [ 0.320317] EISA bus registered > > [ 0.320317] ACPI: bus type pci registered > > [ 0.320317] PCI: Using configuration type 1 for base access > > [ 0.331038] ACPI: EC: EC description table is found, configuring boot > > EC > > [ 0.331277] ACPI: EC: non-query interrupt received, switching to > > interrupt mode > > [ 0.342048] ACPI: BIOS _OSI(Linux) query ignored via DMI > > [ 0.343134] ACPI: Interpreter enabled > > [ 0.343139] ACPI: (supports S0 S3 S4 S5) > > [ 0.343213] ACPI: Using IOAPIC for interrupt routing > > [ 0.370295] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = > > 0x62 > > [ 0.370295] ACPI: EC: driver started in interrupt mode > > [ 0.370410] ACPI: No dock devices found. > > [ 0.370437] ACPI: PCI Root Bridge [PCI0] (0000:00) > > [ 0.370494] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold > > [ 0.370494] pci 0000:00:01.0: PME# disabled > > [ 0.370494] pci 0000:00:07.0: reg 10 32bit mmio: > > [0x50404000-0x50404fff] > > [ 0.370494] pci 0000:00:1b.0: reg 10 64bit mmio: > > [0x50400000-0x50403fff] > > [ 0.370494] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold > > [ 0.370494] pci 0000:00:1b.0: PME# disabled > > [ 0.370494] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold > > [ 0.370494] pci 0000:00:1c.0: PME# disabled > > [ 0.370494] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold > > [ 0.370494] pci 0000:00:1c.1: PME# disabled > > [ 0.370508] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold > > [ 0.370514] pci 0000:00:1c.2: PME# disabled > > [ 0.370585] pci 0000:00:1d.0: reg 20 io port: [0x4080-0x409f] > > [ 0.370653] pci 0000:00:1d.1: reg 20 io port: [0x4060-0x407f] > > [ 0.370720] pci 0000:00:1d.2: reg 20 io port: [0x4040-0x405f] > > [ 0.370788] pci 0000:00:1d.3: reg 20 io port: [0x4020-0x403f] > > [ 0.370858] pci 0000:00:1d.7: reg 10 32bit mmio: > > [0x50405400-0x504057ff] > > [ 0.370907] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold > > [ 0.370914] pci 0000:00:1d.7: PME# disabled > > [ 0.371081] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 > > ACPI/GPIO/TCO > > [ 0.371088] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 > > GPIO > > [ 0.371147] pci 0000:00:1f.1: reg 10 io port: [0x40d8-0x40df] > > [ 0.371157] pci 0000:00:1f.1: reg 14 io port: [0x40ec-0x40ef] > > [ 0.371167] pci 0000:00:1f.1: reg 18 io port: [0x40d0-0x40d7] > > [ 0.371176] pci 0000:00:1f.1: reg 1c io port: [0x40e8-0x40eb] > > [ 0.371186] pci 0000:00:1f.1: reg 20 io port: [0x40b0-0x40bf] > > [ 0.371245] pci 0000:00:1f.2: reg 10 io port: [0x40c8-0x40cf] > > [ 0.371254] pci 0000:00:1f.2: reg 14 io port: [0x40e4-0x40e7] > > [ 0.371264] pci 0000:00:1f.2: reg 18 io port: [0x40c0-0x40c7] > > [ 0.371273] pci 0000:00:1f.2: reg 1c io port: [0x40e0-0x40e3] > > [ 0.371282] pci 0000:00:1f.2: reg 20 io port: [0x40a0-0x40af] > > [ 0.371292] pci 0000:00:1f.2: reg 24 32bit mmio: > > [0x50405000-0x504053ff] > > [ 0.371313] pci 0000:00:1f.2: PME# supported from D3hot > > [ 0.371319] pci 0000:00:1f.2: PME# disabled > > [ 0.371387] pci 0000:00:1f.3: reg 20 io port: [0xefa0-0xefbf] > > [ 0.371454] pci 0000:01:00.0: reg 10 32bit mmio: > > [0x40000000-0x47ffffff] > > [ 0.371464] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff] > > [ 0.371474] pci 0000:01:00.0: reg 18 32bit mmio: > > [0x50300000-0x5030ffff] > > [ 0.371496] pci 0000:01:00.0: reg 30 32bit mmio: > > [0xfffe0000-0xffffffff] > > [ 0.371508] pci 0000:01:00.0: supports D1 D2 > > [ 0.371568] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff] > > [ 0.371573] pci 0000:00:01.0: bridge 32bit mmio: > > [0x50300000-0x503fffff] > > [ 0.371580] pci 0000:00:01.0: bridge 64bit mmio pref: > > [0x40000000-0x47ffffff] > > [ 0.371664] pci 0000:02:00.0: reg 10 64bit mmio: > > [0x50200000-0x50203fff] > > [ 0.371677] pci 0000:02:00.0: reg 18 io port: [0x2000-0x20ff] > > [ 0.371714] pci 0000:02:00.0: reg 30 32bit mmio: > > [0xfffe0000-0xffffffff] > > [ 0.371731] pci 0000:02:00.0: supports D1 D2 > > [ 0.371735] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot > > D3cold > > [ 0.371743] pci 0000:02:00.0: PME# disabled > > [ 0.371805] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] > > [ 0.371812] pci 0000:00:1c.0: bridge 32bit mmio: > > [0x50200000-0x502fffff] > > [ 0.371904] pci 0000:03:00.0: reg 10 64bit mmio: > > [0x50100000-0x5010ffff] > > [ 0.371963] pci 0000:03:00.0: supports D1 > > [ 0.371966] pci 0000:03:00.0: PME# supported from D0 D1 D3hot > > [ 0.371974] pci 0000:03:00.0: PME# disabled > > [ 0.372050] pci 0000:00:1c.1: bridge 32bit mmio: > > [0x50100000-0x501fffff] > > [ 0.372119] pci 0000:00:1c.2: bridge io port: [0x1000-0x1fff] > > [ 0.372125] pci 0000:00:1c.2: bridge 32bit mmio: > > [0x4c100000-0x500fffff] > > [ 0.372135] pci 0000:00:1c.2: bridge 64bit mmio pref: > > [0x48000000-0x4bffffff] > > [ 0.372197] pci 0000:0c:03.0: reg 10 32bit mmio: > > [0x4c004000-0x4c0047ff] > > [ 0.372209] pci 0000:0c:03.0: reg 14 32bit mmio: > > [0x4c000000-0x4c003fff] > > [ 0.372261] pci 0000:0c:03.0: supports D1 D2 > > [ 0.372264] pci 0000:0c:03.0: PME# supported from D0 D1 D2 D3hot > > [ 0.372271] pci 0000:0c:03.0: PME# disabled > > [ 0.372333] pci 0000:00:1e.0: transparent bridge > > [ 0.372343] pci 0000:00:1e.0: bridge 32bit mmio: > > [0x4c000000-0x4c0fffff] > > [ 0.372380] bus 00 -> node 0 > > [ 0.372393] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > > [ 0.374259] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] > > [ 0.374857] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] > > [ 0.375445] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] > > [ 0.376038] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] > > [ 0.376649] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] > > [ 0.401106] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 > > 14 15) *11 > > [ 0.401106] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 > > 14 15) > > [ 0.401106] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 > > 14 15) *11 > > [ 0.401106] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 > > 14 15) > > [ 0.401354] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 > > 14 15) *0, disabled. > > [ 0.401642] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 > > 14 15) *0, disabled. > > [ 0.401932] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 > > 14 15) > > [ 0.402214] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 > > 15) > > [ 0.402326] SCSI subsystem initialized > > [ 0.402326] libata version 3.00 loaded. > > [ 0.402326] usbcore: registered new interface driver usbfs > > [ 0.402326] usbcore: registered new interface driver hub > > [ 0.402326] usbcore: registered new device driver usb > > [ 0.402326] PCI: Using ACPI for IRQ routing > > [ 0.402326] PCI: Routing PCI interrupts for all devices because > > "pci=routeirq" specified > > [ 0.402326] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ > > 16 > > [ 0.402326] pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ > > 16 > > [ 0.402326] pci 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ > > 22 > > [ 0.402326] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ > > 17 > > [ 0.402326] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ > > 16 > > [ 0.402326] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ > > 18 > > [ 0.402326] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ > > 23 > > [ 0.402326] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ > > 19 > > [ 0.402326] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ > > 18 > > [ 0.402326] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ > > 16 > > [ 0.402326] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ > > 23 > > [ 0.402326] pci 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ > > 18 > > [ 0.402326] pci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ > > 19 > > [ 0.402326] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ > > 19 > > [ 0.402326] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ > > 16 > > [ 0.402326] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ > > 16 > > [ 0.402326] pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ > > 17 > > [ 0.402326] pci 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ > > 19 > > [ 0.430080] cfg80211: Using static regulatory domain info > > [ 0.430080] cfg80211: Regulatory domain: US > > [ 0.430080] (start_freq - end_freq @ bandwidth), (max_antenna_gain, > > max_eirp) > > [ 0.430080] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 > > mBm) > > [ 0.430080] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 > > mBm) > > [ 0.430080] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 > > mBm) > > [ 0.430080] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 > > mBm) > > [ 0.430080] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 > > mBm) > > [ 0.430082] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 > > mBm) > > [ 0.430087] cfg80211: Calling CRDA for country: US > > [ 0.430113] NetLabel: Initializing > > [ 0.430113] NetLabel: domain hash size = 128 > > [ 0.430113] NetLabel: protocols = UNLABELED CIPSOv4 > > [ 0.430135] NetLabel: unlabeled traffic allowed by default > > [ 0.430148] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 > > [ 0.430154] hpet0: 3 comparators, 64-bit 14.318180 MHz counter > > [ 0.460028] pnp: PnP ACPI: disabled > > [ 0.495970] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 > > [ 0.495976] pci 0000:00:01.0: IO window: 0x3000-0x3fff > > [ 0.495982] pci 0000:00:01.0: MEM window: 0x50300000-0x503fffff > > [ 0.495987] pci 0000:00:01.0: PREFETCH window: > > 0x00000040000000-0x00000047ffffff > > [ 0.495996] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 > > [ 0.496001] pci 0000:00:1c.0: IO window: 0x2000-0x2fff > > [ 0.496009] pci 0000:00:1c.0: MEM window: 0x50200000-0x502fffff > > [ 0.496016] pci 0000:00:1c.0: PREFETCH window: > > 0x00000050500000-0x000000505fffff > > [ 0.496026] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 > > [ 0.496030] pci 0000:00:1c.1: IO window: disabled > > [ 0.496037] pci 0000:00:1c.1: MEM window: 0x50100000-0x501fffff > > [ 0.496044] pci 0000:00:1c.1: PREFETCH window: disabled > > [ 0.496053] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 > > [ 0.496058] pci 0000:00:1c.2: IO window: 0x1000-0x1fff > > [ 0.496066] pci 0000:00:1c.2: MEM window: 0x4c100000-0x500fffff > > [ 0.496073] pci 0000:00:1c.2: PREFETCH window: > > 0x00000048000000-0x0000004bffffff > > [ 0.496084] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c > > [ 0.496087] pci 0000:00:1e.0: IO window: disabled > > [ 0.496095] pci 0000:00:1e.0: MEM window: 0x4c000000-0x4c0fffff > > [ 0.496101] pci 0000:00:1e.0: PREFETCH window: disabled > > [ 0.496115] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ > > 16 > > [ 0.496121] pci 0000:00:01.0: setting latency timer to 64 > > [ 0.496131] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ > > 17 > > [ 0.496138] pci 0000:00:1c.0: setting latency timer to 64 > > [ 0.496148] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ > > 16 > > [ 0.496155] pci 0000:00:1c.1: setting latency timer to 64 > > [ 0.496165] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ > > 18 > > [ 0.496172] pci 0000:00:1c.2: setting latency timer to 64 > > [ 0.496334] pci 0000:00:1e.0: power state changed by ACPI to D0 > > [ 0.496343] pci 0000:00:1e.0: setting latency timer to 64 > > [ 0.496349] bus: 00 index 0 io port: [0x00-0xffff] > > [ 0.496352] bus: 00 index 1 mmio: [0x000000-0xffffffff] > > [ 0.496356] bus: 01 index 0 io port: [0x3000-0x3fff] > > [ 0.496360] bus: 01 index 1 mmio: [0x50300000-0x503fffff] > > [ 0.496364] bus: 01 index 2 mmio: [0x40000000-0x47ffffff] > > [ 0.496367] bus: 01 index 3 mmio: [0x0-0x0] > > [ 0.496371] bus: 02 index 0 io port: [0x2000-0x2fff] > > [ 0.496374] bus: 02 index 1 mmio: [0x50200000-0x502fffff] > > [ 0.496378] bus: 02 index 2 mmio: [0x50500000-0x505fffff] > > [ 0.496381] bus: 02 index 3 mmio: [0x0-0x0] > > [ 0.496385] bus: 03 index 0 mmio: [0x0-0x0] > > [ 0.496388] bus: 03 index 1 mmio: [0x50100000-0x501fffff] > > [ 0.496392] bus: 03 index 2 mmio: [0x0-0x0] > > [ 0.496395] bus: 03 index 3 mmio: [0x0-0x0] > > [ 0.496398] bus: 04 index 0 io port: [0x1000-0x1fff] > > [ 0.496402] bus: 04 index 1 mmio: [0x4c100000-0x500fffff] > > [ 0.496405] bus: 04 index 2 mmio: [0x48000000-0x4bffffff] > > [ 0.496409] bus: 04 index 3 mmio: [0x0-0x0] > > [ 0.496412] bus: 0c index 0 mmio: [0x0-0x0] > > [ 0.496415] bus: 0c index 1 mmio: [0x4c000000-0x4c0fffff] > > [ 0.496419] bus: 0c index 2 mmio: [0x0-0x0] > > [ 0.496422] bus: 0c index 3 io port: [0x00-0xffff] > > [ 0.496426] bus: 0c index 4 mmio: [0x000000-0xffffffff] > > [ 0.496438] NET: Registered protocol family 2 > > [ 0.501753] Switched to high resolution mode on CPU 1 > > [ 0.510002] Switched to high resolution mode on CPU 0 > > [ 0.520078] IP route cache hash table entries: 32768 (order: 5, > > 131072 bytes) > > [ 0.520400] TCP established hash table entries: 131072 (order: 8, > > 1048576 bytes) > > [ 0.520841] TCP bind hash table entries: 65536 (order: 8, 1310720 > > bytes) > > [ 0.521393] TCP: Hash tables configured (established 131072 bind > > 65536) > > [ 0.521398] TCP reno registered > > [ 0.530152] NET: Registered protocol family 1 > > [ 0.531157] platform rtc_cmos: registered platform RTC device (no PNP > > device found) > > [ 0.533242] Microcode Update Driver: v2.00 > > <tigran@aivazian.fsnet.co.uk>, Peter Oruba > > [ 0.534651] Initializing RT-Tester: OK > > [ 0.534764] audit: initializing netlink socket (enabled) > > [ 0.534829] type=2000 audit(1226705960.531:1): initialized > > [ 0.539745] highmem bounce pool size: 64 pages > > [ 0.539753] HugeTLB registered 4 MB page size, pre-allocated 0 pages > > [ 0.555826] fuse init (API version 7.10) > > [ 0.556420] msgmni has been set to 1747 > > [ 0.556663] SELinux: Registering netfilter hooks > > [ 0.557586] alg: No test for stdrng (krng) > > [ 0.557607] io scheduler noop registered > > [ 0.557954] io scheduler cfq registered (default) > > [ 0.558112] pci 0000:01:00.0: Boot video device > > [ 0.579154] vesafb: framebuffer at 0x40000000, mapped to 0xf8100000, > > using 3072k, total 16384k > > [ 0.579161] vesafb: mode is 1024x768x16, linelength=2048, pages=9 > > [ 0.579165] vesafb: protected mode interface info at c000:ad0c > > [ 0.579169] vesafb: pmi: set display start = c00cad94, set palette = > > c00cae50 > > [ 0.579172] vesafb: scrolling: redraw > > [ 0.579176] vesafb: Truecolor: size=0:5:5:5, shift=0:10:5:0 > > [ 0.603479] Console: switching to colour frame buffer device 128x48 > > [ 0.625655] fb0: VESA VGA frame buffer device > > [ 0.639217] loop: module loaded > > [ 0.639369] Linux video capture interface: v2.00 > > [ 0.639824] input: Macintosh mouse button emulation > > as /class/input/input0 > > [ 0.640456] Driver 'sd' needs updating - please use bus_type methods > > [ 0.640844] Driver 'sr' needs updating - please use bus_type methods > > [ 0.641493] ata_piix 0000:00:1f.1: version 2.12 > > [ 0.641796] ata_piix 0000:00:1f.1: power state changed by ACPI to D0 > > [ 0.642093] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) > > -> IRQ 18 > > [ 0.642464] ata_piix 0000:00:1f.1: setting latency timer to 64 > > [ 0.642822] scsi0 : ata_piix > > [ 0.643459] scsi1 : ata_piix > > [ 0.645607] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 > > irq 14 > > [ 0.645927] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 > > irq 15 > > [ 0.820579] ata1.00: ATAPI: MATSHITADVD-R UJ-857D, KCV9, max > > UDMA/66 > > [ 0.860552] ata1.00: configured for UDMA/66 > > [ 1.033370] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-857D > > KCV9 PQ: 0 ANSI: 5 > > [ 1.038018] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda > > tray > > [ 1.046742] Uniform CD-ROM driver Revision: 3.20 > > [ 1.055628] sr 0:0:0:0: Attached scsi CD-ROM sr0 > > [ 1.064347] sr 0:0:0:0: Attached scsi generic sg0 type 5 > > [ 1.072665] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) > > -> IRQ 19 > > [ 1.081012] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ] > > [ 1.240015] ata_piix 0000:00:1f.2: setting latency timer to 64 > > [ 1.248352] scsi2 : ata_piix > > [ 1.256649] scsi3 : ata_piix > > [ 1.268272] ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma > > 0x40a0 irq 19 > > [ 1.276462] ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma > > 0x40a8 irq 19 > > [ 1.470509] ata3.01: ATA-8: FUJITSU MHW2120BH, 00810013, max UDMA/100 > > [ 1.478586] ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth > > 0/32) > > [ 1.520516] ata3.01: configured for UDMA/100 > > [ 1.691229] scsi 2:0:1:0: Direct-Access ATA FUJITSU MHW2120B > > 0081 PQ: 0 ANSI: 5 > > [ 1.699977] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors: > > (120 GB/111 GiB) > > [ 1.708573] sd 2:0:1:0: [sda] Write Protect is off > > [ 1.717066] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 > > [ 1.725483] sd 2:0:1:0: [sda] Write cache: enabled, read cache: > > enabled, doesn't support DPO or FUA > > [ 1.734094] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors: > > (120 GB/111 GiB) > > [ 1.742618] sd 2:0:1:0: [sda] Write Protect is off > > [ 1.751019] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 > > [ 1.759358] sd 2:0:1:0: [sda] Write cache: enabled, read cache: > > enabled, doesn't support DPO or FUA > > [ 1.767909] sda: sda1 sda2 > > [ 1.777068] sd 2:0:1:0: [sda] Attached SCSI disk > > [ 1.785728] sd 2:0:1:0: Attached scsi generic sg1 type 0 > > [ 1.794189] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) > > Driver > > [ 1.802702] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) > > -> IRQ 23 > > [ 1.811342] ehci_hcd 0000:00:1d.7: setting latency timer to 64 > > [ 1.819810] ehci_hcd 0000:00:1d.7: EHCI Host Controller > > [ 1.828288] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned > > bus number 1 > > [ 1.840774] ehci_hcd 0000:00:1d.7: debug port 1 > > [ 1.849145] ehci_hcd 0000:00:1d.7: cache line size of 32 is not > > supported > > [ 1.857684] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x50405400 > > [ 1.880009] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 > > [ 1.888654] usb usb1: configuration #1 chosen from 1 choice > > [ 1.897201] hub 1-0:1.0: USB hub found > > [ 1.905706] hub 1-0:1.0: 8 ports detected > > [ 1.914792] usbcore: registered new interface driver usblcd > > [ 1.923460] usbcore: registered new interface driver usbled > > [ 1.932197] PNP: No PS/2 controller found. Probing ports directly. > > [ 1.941486] i8042.c: No controller found. > > [ 1.960234] mice: PS/2 mouse device common for all mice > > [ 1.969192] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) > > initialised: dm-devel@redhat.com > > [ 1.977661] EDAC MC: Ver: 2.1.0 Nov 14 2008 > > [ 1.986518] cpuidle: using governor ladder > > [ 1.994982] cpuidle: using governor menu > > [ 2.005315] usbcore: registered new interface driver hiddev > > [ 2.013778] usbcore: registered new interface driver usbhid > > [ 2.022059] usbhid: v2.6:USB HID core driver > > [ 2.030387] Advanced Linux Sound Architecture Driver Version > > 1.0.18rc3. > > [ 2.038885] ALSA device list: > > [ 2.047231] No soundcards found. > > [ 2.055827] oprofile: using NMI interrupt. > > [ 2.064503] IPVS: Registered protocols (TCP, AH, ESP) > > [ 2.073024] IPVS: Connection hash table configured (size=4096, > > memory=32Kbytes) > > [ 2.081548] IPVS: ipvs loaded. > > [ 2.090149] Initializing XFRM netlink socket > > [ 2.098360] NET: Registered protocol family 17 > > [ 2.106530] NET: Registered protocol family 15 > > [ 2.114611] Using IPI No-Shortcut mode > > [ 2.160139] kjournald starting. Commit interval 5 seconds > > [ 2.160149] EXT3-fs: mounted filesystem with ordered data mode. > > [ 2.160180] VFS: Mounted root (ext3 filesystem) readonly. > > [ 2.160485] Freeing unused kernel memory: 404k freed > > [ 2.370013] usb 1-4: new high speed USB device using ehci_hcd and > > address 3 > > [ 2.520992] usb 1-4: configuration #1 chosen from 1 choice > > [ 2.803163] SELinux: 8192 avtab hash slots, 173318 rules. > > [ 2.916909] SELinux: 8192 avtab hash slots, 173318 rules. > > [ 3.121050] SELinux: 7 users, 9 roles, 3230 types, 100 bools, 1 > > sens, 256 cats > > [ 3.128919] SELinux: 73 classes, 173318 rules > > [ 3.144236] SELinux: Completing initialization. > > [ 3.152028] SELinux: Setting up existing superblocks. > > [ 3.187600] SELinux: initialized (dev sda1, type ext3), uses xattr > > [ 3.338652] SELinux: initialized (dev usbfs, type usbfs), uses > > genfs_contexts > > [ 3.346547] SELinux: initialized (dev selinuxfs, type selinuxfs), > > uses genfs_contexts > > [ 3.354544] SELinux: initialized (dev mqueue, type mqueue), uses > > transition SIDs > > [ 3.362578] SELinux: initialized (dev hugetlbfs, type hugetlbfs), > > uses genfs_contexts > > [ 3.370625] SELinux: initialized (dev devpts, type devpts), uses > > transition SIDs > > [ 3.378643] SELinux: initialized (dev inotifyfs, type inotifyfs), > > uses genfs_contexts > > [ 3.386818] SELinux: initialized (dev tmpfs, type tmpfs), uses > > transition SIDs > > [ 3.394979] SELinux: initialized (dev anon_inodefs, type > > anon_inodefs), uses genfs_contexts > > [ 3.403391] SELinux: initialized (dev pipefs, type pipefs), uses task > > SIDs > > [ 3.411738] SELinux: initialized (dev debugfs, type debugfs), uses > > genfs_contexts > > [ 3.420100] SELinux: initialized (dev sockfs, type sockfs), uses task > > SIDs > > [ 3.428408] SELinux: initialized (dev proc, type proc), uses > > genfs_contexts > > [ 3.436592] SELinux: initialized (dev bdev, type bdev), uses > > genfs_contexts > > [ 3.444492] SELinux: initialized (dev rootfs, type rootfs), uses > > genfs_contexts > > [ 3.452457] SELinux: initialized (dev sysfs, type sysfs), uses > > genfs_contexts > > [ 3.495760] type=1403 audit(1226705963.490:2): policy loaded > > auid=4294967295 ses=4294967295 > > [ 4.184266] SELinux: initialized (dev tmpfs, type tmpfs), uses > > transition SIDs > > [ 4.355686] SELinux: initialized (dev tmpfs, type tmpfs), uses > > transition SIDs > > [ 4.368701] SELinux: initialized (dev tmpfs, type tmpfs), uses > > transition SIDs > > [ 9.900482] SELinux: initialized (dev tmpfs, type tmpfs), uses > > transition SIDs > > [ 10.829515] ACPI: SSDT 3FEB8C10, 02AE (r1 APPLE Cpu0Ist 3000 > > INTL 20050309) > > [ 10.848402] ACPI: SSDT 3FEB8910, 02A0 (r1 APPLE Cpu0Cst 3001 > > INTL 20050309) > > [ 10.858321] Monitor-Mwait will be used to enter C-1 state > > [ 10.867338] Monitor-Mwait will be used to enter C-2 state > > [ 10.876125] Monitor-Mwait will be used to enter C-3 state > > [ 10.884784] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) > > [ 10.893341] processor ACPI_CPU:00: registered as cooling_device0 > > [ 10.902062] ACPI: Processor [CPU0] (supports 8 throttling states) > > [ 10.910983] input: Power Button (FF) as /class/input/input1 > > [ 10.936619] Marking TSC unstable due to TSC halts in idle > > [ 10.972663] ACPI: Power Button (FF) [PWRF] > > [ 10.984596] ACPI: SSDT 3FEB8F10, 0087 (r1 APPLE Cpu1Ist 3000 > > INTL 20050309) > > [ 10.994451] ACPI: SSDT 3FEB7F10, 0085 (r1 APPLE Cpu1Cst 3000 > > INTL 20050309) > > [ 11.008804] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) > > [ 11.020792] processor ACPI_CPU:01: registered as cooling_device1 > > [ 11.031546] ACPI: Processor [CPU1] (supports 8 throttling states) > > [ 11.119331] ACPI Warning (nspredef-0858): \_SB_.BAT0._BIF: Return > > Package type mismatch at index 9 - found Buffer, expected String > > [20080926] > > [ 11.137971] power_supply BAT0: uevent > > [ 11.147121] power_supply BAT0: No power supply yet > > [ 11.156247] power_supply BAT0: power_supply_changed > > [ 11.165416] power_supply BAT0: power_supply_changed_work > > [ 11.234034] ACPI: Battery Slot [BAT0] (battery present) > > [ 11.243095] power_supply ADP1: uevent > > [ 11.253028] power_supply ADP1: No power supply yet > > [ 11.263293] power_supply ADP1: power_supply_changed > > [ 11.273053] ACPI: AC Adapter [ADP1] (on-line) > > [ 11.282814] input: Lid Switch as /class/input/input2 > > [ 11.292548] power_supply ADP1: power_supply_changed_work > > [ 11.301924] power_supply ADP1: power_supply_update_gen_leds 1 > > [ 11.312016] power_supply ADP1: uevent > > [ 11.320928] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 > > [ 11.324526] ath9k: 0.1 > > [ 11.324568] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> > > IRQ 17 > > [ 11.324580] ath9k 0000:03:00.0: setting latency timer to 64 > > [ 11.354411] power_supply ADP1: Static prop TYPE=Mains > > [ 11.362728] power_supply ADP1: 1 dynamic props > > [ 11.376403] power_supply ADP1: prop ONLINE=1 > > [ 11.412192] uhci_hcd: USB Universal Host Controller Interface driver > > [ 11.425703] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) > > -> IRQ 23 > > [ 11.438977] uhci_hcd 0000:00:1d.0: setting latency timer to 64 > > [ 11.451921] uhci_hcd 0000:00:1d.0: UHCI Host Controller > > [ 11.464900] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned > > bus number 2 > > [ 11.477767] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080 > > [ 11.490880] usb usb2: configuration #1 chosen from 1 choice > > [ 11.492576] phy0: Selected rate control algorithm > > 'ath9k_rate_control' > > [ 11.499406] power_supply BAT0: power_supply_update_bat_leds 4 > > [ 11.499426] power_supply BAT0: uevent > > [ 11.499428] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 > > [ 11.499433] power_supply BAT0: Static prop TYPE=Battery > > [ 11.499435] power_supply BAT0: 12 dynamic props > > [ 11.499438] power_supply BAT0: prop STATUS=Full > > [ 11.499441] power_supply BAT0: prop PRESENT=1 > > [ 11.499445] power_supply BAT0: prop TECHNOLOGY=Unknown > > [ 11.499449] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 > > [ 11.499451] power_supply BAT0: prop VOLTAGE_NOW=12425000 > > [ 11.499455] power_supply BAT0: prop CURRENT_NOW=0 > > [ 11.499458] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 > > [ 11.499461] power_supply BAT0: prop ENERGY_FULL=50780000 > > [ 11.499464] power_supply BAT0: prop ENERGY_NOW=48520000 > > [ 11.499468] power_supply BAT0: prop MODEL_NAME=ASMB012 > > [ 11.499471] power_supply BAT0: prop MANUFACTURER=SMPN012 > > [ 11.499474] power_supply BAT0: prop SERIAL_NUMBER= > > [ 11.500395] Registered led device: ath9k-phy0:radio > > [ 11.500443] Registered led device: ath9k-phy0:assoc > > [ 11.500491] Registered led device: ath9k-phy0:tx > > [ 11.500538] Registered led device: ath9k-phy0:rx > > [ 11.501380] phy0: Atheros 5416: mem=0xf87a0000, irq=17 > > [ 11.659873] hub 2-0:1.0: USB hub found > > [ 11.665853] hub 2-0:1.0: 2 ports detected > > [ 11.666147] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) > > -> IRQ 19 > > [ 11.666158] uhci_hcd 0000:00:1d.1: setting latency timer to 64 > > [ 11.666161] uhci_hcd 0000:00:1d.1: UHCI Host Controller > > [ 11.666220] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned > > bus number 3 > > [ 11.666256] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060 > > [ 11.666436] usb usb3: configuration #1 chosen from 1 choice > > [ 11.666501] hub 3-0:1.0: USB hub found > > [ 11.666521] hub 3-0:1.0: 2 ports detected > > [ 11.666760] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) > > -> IRQ 18 > > [ 11.666768] uhci_hcd 0000:00:1d.2: setting latency timer to 64 > > [ 11.666771] uhci_hcd 0000:00:1d.2: UHCI Host Controller > > [ 11.666835] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned > > bus number 4 > > [ 11.666880] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040 > > [ 11.667043] usb usb4: configuration #1 chosen from 1 choice > > [ 11.667114] hub 4-0:1.0: USB hub found > > [ 11.667126] hub 4-0:1.0: 2 ports detected > > [ 11.667374] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) > > -> IRQ 16 > > [ 11.667382] uhci_hcd 0000:00:1d.3: setting latency timer to 64 > > [ 11.667385] uhci_hcd 0000:00:1d.3: UHCI Host Controller > > [ 11.667445] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned > > bus number 5 > > [ 11.667489] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020 > > [ 11.667678] usb usb5: configuration #1 chosen from 1 choice > > [ 11.667742] hub 5-0:1.0: USB hub found > > [ 11.667754] hub 5-0:1.0: 2 ports detected > > [ 11.668209] ACPI: Lid Switch [LID0] > > [ 11.668326] input: Power Button (CM) as /class/input/input3 > > [ 11.855903] ACPI: Power Button (CM) [PWRB] > > [ 11.862529] input: Sleep Button (CM) as /class/input/input4 > > [ 11.897478] ACPI: Sleep Button (CM) [SLPB] > > [ 11.947016] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) > > -> IRQ 22 > > [ 11.953941] HDA Intel 0000:00:1b.0: setting latency timer to 64 > > [ 11.978662] firewire_ohci 0000:0c:03.0: PCI INT A -> GSI 19 (level, > > low) -> IRQ 19 > > [ 12.022935] uvcvideo: Found UVC 1.00 device Built-in iSight > > (05ac:8501) > > [ 12.032616] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : > > -32 (exp. 26). > > [ 12.042570] input: Built-in iSight as /class/input/input5 > > [ 12.042610] usb 2-2: new full speed USB device using uhci_hcd and > > address 2 > > [ 12.059396] hda_codec: STAC922x, Apple subsys_id=106b1e00 > > [ 12.070735] usbcore: registered new interface driver uvcvideo > > [ 12.078879] USB Video Class driver (v0.1.0) > > [ 12.092523] firewire_ohci: Added fw-ohci device 0000:0c:03.0, OHCI > > version 1.10 > > [ 12.256897] usb 2-2: configuration #1 chosen from 1 choice > > [ 12.282940] input: Apple Computer Apple Internal Keyboard / Trackpad > > as /class/input/input6 > > [ 12.320156] apple 0003:05AC:021A.0001: input: USB HID v1.11 Keyboard > > [Apple Computer Apple Internal Keyboard / Trackpad] on > > usb-0000:00:1d.0-2/input0 > > [ 12.341951] SELinux: initialized (dev tmpfs, type tmpfs), uses > > transition SIDs > > [ 12.365052] input: Apple Computer Apple Internal Keyboard / Trackpad > > as /class/input/input7 > > [ 12.419321] apple 0003:05AC:021A.0002: input: USB HID v1.11 Device > > [Apple Computer Apple Internal Keyboard / Trackpad] on > > usb-0000:00:1d.0-2/input2 > > [ 12.447937] appletouch: Geyser mode initialized. > > [ 12.469393] input: appletouch as /class/input/input8 > > [ 12.484792] usbcore: registered new interface driver appletouch > > [ 12.497510] applesmc: Apple MacBook Pro detected: > > [ 12.508263] applesmc: - Model with accelerometer > > [ 12.518950] applesmc: - Model with light sensors and backlight > > [ 12.529972] applesmc: - Model with 12 temperature sensors > > [ 12.542254] applesmc: device has already been initialized (0xe0, > > 0x00). > > [ 12.553133] applesmc: device successfully initialized. > > [ 12.564722] applesmc: 2 fans found. > > [ 12.571160] usb 4-2: new full speed USB device using uhci_hcd and > > address 2 > > [ 12.588267] input: applesmc as /class/input/input9 > > [ 12.600311] firewire_core: created device fw0: GUID 0019e3fffe2ad87e, > > S800 > > [ 12.627058] Registered led device: smc::kbd_backlight > > [ 12.638345] applesmc: driver successfully loaded. > > [ 12.722988] Linux agpgart interface v0.103 > > [ 12.776238] usb 4-2: configuration #1 chosen from 1 choice > > [ 12.797081] generic-usb 0003:05AC:8240.0003: hiddev0: USB HID v1.11 > > Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2/input0 > > [ 12.820185] [drm] Initialized drm 1.1.0 20060810 > > [ 12.862647] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ > > 16 > > [ 12.873995] pci 0000:01:00.0: setting latency timer to 64 > > [ 12.885470] [drm] Initialized radeon 1.29.0 20080528 on minor 0 > > [ 12.954269] usb 5-1: new full speed USB device using uhci_hcd and > > address 2 > > [ 13.050730] ip_tables: (C) 2000-2006 Netfilter Core Team > > [ 13.161914] nf_conntrack version 0.5.0 (16142 buckets, 64568 max) > > [ 13.173667] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. > > Please use > > [ 13.185007] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack > > module option or > > [ 13.196339] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. > > [ 13.196524] usb 5-1: configuration #1 chosen from 1 choice > > [ 13.236747] drivers/hid/usbhid/hid-core.c: couldn't find an input > > interrupt endpoint > > [ 13.253995] arp_tables: (C) 2002 David S. Miller > > [ 13.315123] ieee80211_crypt: registered algorithm 'NULL' > > [ 13.357786] ieee80211: 802.11 data/management/control stack, > > git-1.1.13 > > [ 13.369128] ieee80211: Copyright (C) 2004-2005 Intel Corporation > > <jketreno@linux.intel.com> > > [ 13.396245] ieee80211_crypt: registered algorithm 'TKIP' > > [ 13.471701] usbcore: registered new interface driver isight_firmware > > [ 13.525042] ipmi message handler version 39.2 > > [ 13.551760] IPMI Watchdog: driver initialized > > [ 13.776369] Adding 2988360k swap on /dev/sda2. Priority:-1 extents:1 > > across:2988360k > > [ 14.172515] EXT3 FS on sda1, internal journal > > [ 17.501470] warning: `avahi-daemon' uses 32-bit capabilities (legacy > > support in use) > > [ 18.072715] applesmc: light sensor data length set to 6 > > [ 19.427621] usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt > > 64 rq 0 len 0 ret -84 > > [ 19.452450] Bluetooth: Core ver 2.13 > > [ 19.456615] NET: Registered protocol family 31 > > [ 19.456619] Bluetooth: HCI device and connection manager initialized > > [ 19.456625] Bluetooth: HCI socket layer initialized > > [ 19.492652] Bluetooth: L2CAP ver 2.11 > > [ 19.492657] Bluetooth: L2CAP socket layer initialized > > [ 19.531701] Bluetooth: RFCOMM socket layer initialized > > [ 19.531732] Bluetooth: RFCOMM TTY layer initialized > > [ 19.531736] Bluetooth: RFCOMM ver 1.10 > > [ 19.549691] Bluetooth: SCO (Voice Link) ver 0.6 > > [ 19.549696] Bluetooth: SCO socket layer initialized > > [ 19.740179] usb 5-1: USB disconnect, address 2 > > [ 19.850721] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 > > [ 19.850727] Bluetooth: BNEP filters: protocol multicast > > [ 20.023468] usb 5-1: new full speed USB device using uhci_hcd and > > address 3 > > [ 20.230853] usb 5-1: configuration #1 chosen from 1 choice > > [ 20.292586] Bluetooth: Generic Bluetooth USB driver ver 0.3 > > [ 20.292774] usbcore: registered new interface driver btusb > > [ 26.209069] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 > > [ 26.215644] input: justinmattock___s mouse #1 as /class/input/input10 > > [ 26.243603] generic-bluetooth 0005:0000:0000.0005: input: BLUETOOTH > > HID v0.00 Mouse [justinmattock___s mouse #1] on 00:17:F2:B4:BC:F5 > > [ 32.303010] [drm] Setting GART location based on new memory map > > [ 32.304544] [drm] Loading R500 Microcode > > [ 32.304597] [drm] Num pipes: 1 > > [ 32.304610] [drm] writeback test succeeded in 1 usecs > > [ 82.162134] wlan0: authenticate with AP 00:1e:2a:00:67:f0 > > [ 82.164163] wlan0: authenticated > > [ 82.164169] wlan0: associate with AP 00:1e:2a:00:67:f0 > > [ 82.166518] wlan0: RX AssocResp from 00:1e:2a:00:67:f0 (capab=0x431 > > status=0 aid=33) > > [ 82.166523] wlan0: associated > > [ 1926.692564] CE: hpet increasing min_delta_ns to 15000 nsec > > [ 6017.062769] power_supply ADP1: uevent > > [ 6017.062775] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 > > [ 6017.062787] power_supply ADP1: Static prop TYPE=Mains > > [ 6017.062793] power_supply ADP1: 1 dynamic props > > [ 6017.062799] power_supply ADP1: prop ONLINE=0 > > [ 6017.302516] power_supply BAT0: uevent > > [ 6017.302522] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 > > [ 6017.302535] power_supply BAT0: Static prop TYPE=Battery > > [ 6017.302541] power_supply BAT0: 12 dynamic props > > [ 6017.302547] power_supply BAT0: prop STATUS=Discharging > > [ 6017.302554] power_supply BAT0: prop PRESENT=1 > > [ 6017.302561] power_supply BAT0: prop TECHNOLOGY=Unknown > > [ 6017.302570] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 > > [ 6017.302577] power_supply BAT0: prop VOLTAGE_NOW=12423000 > > [ 6017.302584] power_supply BAT0: prop CURRENT_NOW=0 > > [ 6017.302592] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 > > [ 6017.302600] power_supply BAT0: prop ENERGY_FULL=50780000 > > [ 6017.302607] power_supply BAT0: prop ENERGY_NOW=48520000 > > [ 6017.302614] power_supply BAT0: prop MODEL_NAME=ASMB012 > > [ 6017.302621] power_supply BAT0: prop MANUFACTURER=SMPN012 > > [ 6017.302628] power_supply BAT0: prop SERIAL_NUMBER= > > [ 6064.195248] power_supply ADP1: uevent > > [ 6064.195254] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 > > [ 6064.195265] power_supply ADP1: Static prop TYPE=Mains > > [ 6064.195270] power_supply ADP1: 1 dynamic props > > [ 6064.195276] power_supply ADP1: prop ONLINE=1 > > [ 6064.442624] power_supply BAT0: uevent > > [ 6064.442630] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 > > [ 6064.442643] power_supply BAT0: Static prop TYPE=Battery > > [ 6064.442649] power_supply BAT0: 12 dynamic props > > [ 6064.442655] power_supply BAT0: prop STATUS=Full > > [ 6064.442662] power_supply BAT0: prop PRESENT=1 > > [ 6064.442669] power_supply BAT0: prop TECHNOLOGY=Unknown > > [ 6064.442678] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 > > [ 6064.442686] power_supply BAT0: prop VOLTAGE_NOW=12118000 > > [ 6064.442693] power_supply BAT0: prop CURRENT_NOW=23969000 > > [ 6064.442700] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 > > [ 6064.442708] power_supply BAT0: prop ENERGY_FULL=50780000 > > [ 6064.442715] power_supply BAT0: prop ENERGY_NOW=48510000 > > [ 6064.442722] power_supply BAT0: prop MODEL_NAME=ASMB012 > > [ 6064.442729] power_supply BAT0: prop MANUFACTURER=SMPN012 > > [ 6064.442736] power_supply BAT0: prop SERIAL_NUMBER= > > [ 6066.464031] power_supply BAT0: uevent > > [ 6066.464037] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 > > [ 6066.464049] power_supply BAT0: Static prop TYPE=Battery > > [ 6066.464055] power_supply BAT0: 12 dynamic props > > [ 6066.464061] power_supply BAT0: prop STATUS=Charging > > [ 6066.464068] power_supply BAT0: prop PRESENT=1 > > [ 6066.464075] power_supply BAT0: prop TECHNOLOGY=Unknown > > [ 6066.464087] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 > > [ 6066.464095] power_supply BAT0: prop VOLTAGE_NOW=12373000 > > [ 6066.464103] power_supply BAT0: prop CURRENT_NOW=4058000 > > [ 6066.464111] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 > > [ 6066.464119] power_supply BAT0: prop ENERGY_FULL=50780000 > > [ 6066.464127] power_supply BAT0: prop ENERGY_NOW=48510000 > > [ 6066.464135] power_supply BAT0: prop MODEL_NAME=ASMB012 > > [ 6066.464143] power_supply BAT0: prop MANUFACTURER=SMPN012 > > [ 6066.464150] power_supply BAT0: prop SERIAL_NUMBER= > > [ 6527.737472] ACPI: EC: GPE storm detected, transactions will use > > polling mode > > [ 8255.325198] power_supply BAT0: uevent > > [ 8255.325203] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 > > [ 8255.325214] power_supply BAT0: Static prop TYPE=Battery > > [ 8255.325219] power_supply BAT0: 12 dynamic props > > [ 8255.325225] power_supply BAT0: prop STATUS=Full > > [ 8255.325232] power_supply BAT0: prop PRESENT=1 > > [ 8255.325240] power_supply BAT0: prop TECHNOLOGY=Unknown > > [ 8255.325250] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 > > [ 8255.325258] power_supply BAT0: prop VOLTAGE_NOW=12603000 > > [ 8255.325265] power_supply BAT0: prop CURRENT_NOW=113000 > > [ 8255.325273] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 > > [ 8255.325281] power_supply BAT0: prop ENERGY_FULL=50780000 > > [ 8255.325289] power_supply BAT0: prop ENERGY_NOW=51080000 > > [ 8255.325296] power_supply BAT0: prop MODEL_NAME=ASMB012 > > [ 8255.325303] power_supply BAT0: prop MANUFACTURER=SMPN012 > > [ 8255.325311] power_supply BAT0: prop SERIAL_NUMBER= > > > > I thought it was because I disconnected the laptop and moved > > it into another area, but doesn't seem to be the case. > The only change to the .config was enabling under kernel hacking sleep inside spinlock; other than that, same as usual. I'll recompile tomorrow to see if this causes this. -- Justin P. Mattock <justinmattock@gmail.com> ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: ACPI: EC: GPE storm detected, transactions will use polling mode 2008-11-15 6:43 ` ACPI: EC: GPE storm detected, transactions will use polling mode Andrew Morton 2008-11-15 6:56 ` Justin P. Mattock @ 2008-11-15 9:23 ` Alexey Starikovskiy 2008-11-15 10:37 ` Alan Jenkins 1 sibling, 1 reply; 15+ messages in thread From: Alexey Starikovskiy @ 2008-11-15 9:23 UTC (permalink / raw) To: Andrew Morton; +Cc: Justin P. Mattock, Linux Kernel Mailing List, linux-acpi Andrew Morton wrote: > (cc linux-acpi) > > On Fri, 14 Nov 2008 20:16:17 -0800 "Justin P. Mattock" <justinmattock@gmail.com> wrote: > > >> just pulled the latest git today and am now noticing >> the lovely gpe storm being triggered.(dmesg below); >> > > Are any other effects observeable? > > I assume that 2.6.27 didn't do this. > > It did. Justin even opened a bug -- #11724. ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: ACPI: EC: GPE storm detected, transactions will use polling mode 2008-11-15 9:23 ` Alexey Starikovskiy @ 2008-11-15 10:37 ` Alan Jenkins 2008-11-15 11:36 ` Rafael J. Wysocki 0 siblings, 1 reply; 15+ messages in thread From: Alan Jenkins @ 2008-11-15 10:37 UTC (permalink / raw) To: Alexey Starikovskiy Cc: Andrew Morton, Justin P. Mattock, Linux Kernel Mailing List, linux-acpi On Sat, Nov 15, 2008 at 9:23 AM, Alexey Starikovskiy <aystarik@gmail.com> wrote: > Andrew Morton wrote: >> >> (cc linux-acpi) >> >> On Fri, 14 Nov 2008 20:16:17 -0800 "Justin P. Mattock" >> <justinmattock@gmail.com> wrote: >> >> >>> >>> just pulled the latest git today and am now noticing >>> the lovely gpe storm being triggered.(dmesg below); >>> >> >> Are any other effects observeable? >> >> I assume that 2.6.27 didn't do this. >> >> > > It did. Justin even opened a bug -- #11724. In case anyone else tries to follow that, it's actually #10724 :). ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: ACPI: EC: GPE storm detected, transactions will use polling mode 2008-11-15 10:37 ` Alan Jenkins @ 2008-11-15 11:36 ` Rafael J. Wysocki 2008-11-15 12:06 ` Alan Jenkins 0 siblings, 1 reply; 15+ messages in thread From: Rafael J. Wysocki @ 2008-11-15 11:36 UTC (permalink / raw) To: Alan Jenkins, Justin P. Mattock Cc: Alexey Starikovskiy, Andrew Morton, Linux Kernel Mailing List, linux-acpi, Len Brown On Saturday, 15 of November 2008, Alan Jenkins wrote: > On Sat, Nov 15, 2008 at 9:23 AM, Alexey Starikovskiy <aystarik@gmail.com> wrote: > > Andrew Morton wrote: > >> > >> (cc linux-acpi) > >> > >> On Fri, 14 Nov 2008 20:16:17 -0800 "Justin P. Mattock" > >> <justinmattock@gmail.com> wrote: > >> > >> > >>> > >>> just pulled the latest git today and am now noticing > >>> the lovely gpe storm being triggered.(dmesg below); > >>> > >> > >> Are any other effects observeable? > >> > >> I assume that 2.6.27 didn't do this. > >> > >> > > > > It did. Justin even opened a bug -- #11724. > > In case anyone else tries to follow that, it's actually #10724 :). Yes, the "transaction in interrupt context" patch fixed that IIRC and the one of the patches in the recet ACPI merge broke it again. Justin, can you see if reverting one or more of the following commits helps: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=8517934ef6aaa28d6e055b98df65b31cedbd1372 http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=06cf7d3c7af902939cd1754abcafb2464060cba8 http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=0b7084ac67fb84f0cf2f8bc02d7e0dea8521dd2d http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=a2f93aeadf97e870ff385030633a73e21146815d http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=dd15f8c42af09031e27da5b4d697ce925511f2e1 http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=f8248434e6a11d7cd314281be3b39bbcf82fc243 http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=1cfe62c8010ac56e1bd3827e30386a87cc2f3594 (please revert in this order)? Thanks, Rafael ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: ACPI: EC: GPE storm detected, transactions will use polling mode 2008-11-15 11:36 ` Rafael J. Wysocki @ 2008-11-15 12:06 ` Alan Jenkins 2008-11-15 18:39 ` Justin Mattock 0 siblings, 1 reply; 15+ messages in thread From: Alan Jenkins @ 2008-11-15 12:06 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Justin P. Mattock, Alexey Starikovskiy, Andrew Morton, Linux Kernel Mailing List, linux-acpi, Len Brown Rafael J. Wysocki wrote: > On Saturday, 15 of November 2008, Alan Jenkins wrote: > >> On Sat, Nov 15, 2008 at 9:23 AM, Alexey Starikovskiy <aystarik@gmail.com> wrote: >> >>> Andrew Morton wrote: >>> >>>> (cc linux-acpi) >>>> >>>> On Fri, 14 Nov 2008 20:16:17 -0800 "Justin P. Mattock" >>>> <justinmattock@gmail.com> wrote: >>>> >>>> >>>> >>>>> just pulled the latest git today and am now noticing >>>>> the lovely gpe storm being triggered.(dmesg below); >>>>> >>>>> >>>> Are any other effects observeable? >>>> >>>> I assume that 2.6.27 didn't do this. >>>> >>>> >>>> >>> It did. Justin even opened a bug -- #11724. >>> >> In case anyone else tries to follow that, it's actually #10724 :). >> > > Yes, the "transaction in interrupt context" patch fixed that IIRC and the one > of the patches in the recet ACPI merge broke it again. > > Justin, can you see if reverting one or more of the following commits helps: > > http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=8517934ef6aaa28d6e055b98df65b31cedbd1372 > http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=06cf7d3c7af902939cd1754abcafb2464060cba8 > http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=0b7084ac67fb84f0cf2f8bc02d7e0dea8521dd2d > http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=a2f93aeadf97e870ff385030633a73e21146815d > http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=dd15f8c42af09031e27da5b4d697ce925511f2e1 > http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=f8248434e6a11d7cd314281be3b39bbcf82fc243 > http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=1cfe62c8010ac56e1bd3827e30386a87cc2f3594 > > (please revert in this order)? > Be aware there's a real possibility this was only a cosmetic fix (and regression). I think the original GPE storm avoidance printed that message by default. Then the "transaction in interrupt context" made the message into a pr_debug(), - i.e. disabled it by default. And then my "make messages more useful when GPE storm is detected" re-enabled it. IIRC, this flip-flopping is contained within 2.6.28-rc. I.e. I don't think it will show up as a (cosmetic) regression when jumping straight from 2.6.27 to 2.6.28. Though I suspect it will shows up between certain versions of -stable. Regards Alan ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: ACPI: EC: GPE storm detected, transactions will use polling mode 2008-11-15 12:06 ` Alan Jenkins @ 2008-11-15 18:39 ` Justin Mattock 2008-11-15 19:19 ` Rafael J. Wysocki 0 siblings, 1 reply; 15+ messages in thread From: Justin Mattock @ 2008-11-15 18:39 UTC (permalink / raw) To: Alan Jenkins Cc: Rafael J. Wysocki, Alexey Starikovskiy, Andrew Morton, Linux Kernel Mailing List, linux-acpi, Len Brown [-- Attachment #1: Type: text/plain, Size: 4019 bytes --] On Sat, Nov 15, 2008 at 4:06 AM, Alan Jenkins <alan-jenkins@tuffmail.co.uk> wrote: > Rafael J. Wysocki wrote: >> >> On Saturday, 15 of November 2008, Alan Jenkins wrote: >> >>> >>> On Sat, Nov 15, 2008 at 9:23 AM, Alexey Starikovskiy <aystarik@gmail.com> >>> wrote: >>> >>>> >>>> Andrew Morton wrote: >>>> >>>>> >>>>> (cc linux-acpi) >>>>> >>>>> On Fri, 14 Nov 2008 20:16:17 -0800 "Justin P. Mattock" >>>>> <justinmattock@gmail.com> wrote: >>>>> >>>>> >>>>>> >>>>>> just pulled the latest git today and am now noticing >>>>>> the lovely gpe storm being triggered.(dmesg below); >>>>>> >>>>> >>>>> Are any other effects observeable? >>>>> >>>>> I assume that 2.6.27 didn't do this. >>>>> >>>>> >>>> >>>> It did. Justin even opened a bug -- #11724. >>>> >>> >>> In case anyone else tries to follow that, it's actually #10724 :). >>> >> >> Yes, the "transaction in interrupt context" patch fixed that IIRC and the >> one >> of the patches in the recet ACPI merge broke it again. >> >> Justin, can you see if reverting one or more of the following commits >> helps: >> >> >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=8517934ef6aaa28d6e055b98df65b31cedbd1372 >> >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=06cf7d3c7af902939cd1754abcafb2464060cba8 >> >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=0b7084ac67fb84f0cf2f8bc02d7e0dea8521dd2d >> >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=a2f93aeadf97e870ff385030633a73e21146815d >> >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=dd15f8c42af09031e27da5b4d697ce925511f2e1 >> >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=f8248434e6a11d7cd314281be3b39bbcf82fc243 >> >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=1cfe62c8010ac56e1bd3827e30386a87cc2f3594 >> >> (please revert in this order)? >> > > Be aware there's a real possibility this was only a cosmetic fix (and > regression). > > I think the original GPE storm avoidance printed that message by default. > Then the "transaction in interrupt context" made the message into a > pr_debug(), - i.e. disabled it by default. And then my "make messages more > useful when GPE storm is detected" re-enabled it. > > IIRC, this flip-flopping is contained within 2.6.28-rc. I.e. I don't think > it will show up as a (cosmetic) regression when jumping straight from 2.6.27 > to 2.6.28. Though I suspect it will shows up between certain versions of > -stable. > > Regards > Alan > O.K. I think I was wrong about stating this was not caused by the discharging and charging of the battery. to retrace my steps yesterday I pulled, then recompiled, then let the system idle for a few, then once I moved the computer to the other room,(unplugged/plugged the A/C adapter) the light turned orange on the A/C adapter then once the battery became fully charged(green light on A/C adapter) the gpe storm was triggered. Once I saw the gpe storm, I rebooted (under the impression the battery was in a good state), instantly the gpe storm was triggered. leading me to beleive this was something else. So after seeing that and sending a post I used the acpi_osi=Darwin option sat had a beer and worried about it tomorrow. Now when I woke up, and saw the commits from rafael(thanks for the help) I decided to make sure this was reproducible, So removing the acpi_osi option, then let the system idled. To my amazement the gpe storm was not triggered at all. (even unplugging and plugging the A/C multiple times had no effect) After a while thinking what the hell is going on here, I decided to discharge the battery to around 97% or 5 min. and then charge to see if this triggers the gpe storm. Well sure enough it did.(attached is dmesg); So for now should I go and individually revert the commits; charge, and discharge to locate the culprit, or is this something completely different? -- Justin P. Mattock [-- Attachment #2: dmesg --] [-- Type: application/octet-stream, Size: 73478 bytes --] [ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00 [ 0.000000] Linux version 2.6.28-rc4-00322-g58e20d8 (root@LiNuX) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Sat Nov 15 09:13:21 PST 2008 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f0ea000 (usable) [ 0.000000] BIOS-e820: 000000003f0ea000 - 000000003f2eb000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f2eb000 - 000000003febe000 (ACPI data) [ 0.000000] BIOS-e820: 000000003febe000 - 000000003feef000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003feef000 - 000000003ff00000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x3f0ea max_arch_pfn = 0x100000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 2 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable) [ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 0000000000092c00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003f0ea000 (usable) [ 0.000000] modified: 000000003f0ea000 - 000000003f2eb000 (ACPI NVS) [ 0.000000] modified: 000000003f2eb000 - 000000003febe000 (ACPI data) [ 0.000000] modified: 000000003febe000 - 000000003feef000 (ACPI NVS) [ 0.000000] modified: 000000003feef000 - 000000003ff00000 (ACPI data) [ 0.000000] modified: 000000003ff00000 - 0000000040000000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-16000 [ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE ) [ 0.000000] ACPI: XSDT 3FEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013) [ 0.000000] ACPI: FACP 3FEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F) [ 0.000000] ACPI: DSDT 3FEF0000, 48D1 (r1 APPLE MacBookP 20002 INTL 20050309) [ 0.000000] ACPI: FACS 3FEC0000, 0040 [ 0.000000] ACPI: HPET 3FEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: APIC 3FEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: MCFG 3FEF8000, 003C (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: ASF! 3FEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: SBST 3FEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: ECDT 3FEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: SSDT 3FEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309) [ 0.000000] ACPI: SSDT 3FEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309) [ 0.000000] ACPI: SSDT 3FEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309) [ 0.000000] ACPI: DMI detected: Apple [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 120MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 00000000 - 377fe000 [ 0.000000] bootmap 00012000 - 00018f00 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 000062bbe4] TEXT DATA BSS ==> [0000100000 - 000062bbe4] [ 0.000000] #4 [000062c000 - 000062f000] INIT_PG_TABLE ==> [000062c000 - 000062f000] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003f0ea [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x00000007 [ 0.000000] 0: 0x00000010 -> 0x00000092 [ 0.000000] 0: 0x00000100 -> 0x0003f0ea [ 0.000000] On node 0 totalpages: 258159 [ 0.000000] free_area_init_node: node 0, pgdat c051f980, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3941 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 242 pages used for memmap [ 0.000000] HighMem zone: 30714 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000 [ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) [ 0.000000] PERCPU: Allocating 40960 bytes of per cpu data [ 0.000000] NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256141 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.28-rc4-00322-g58e20d8 root=/dev/sda1 ro vga=790 debug pnpacpi=off pci=routeirq audit=1 selinux=1 enforcing=1 [ 0.000000] audit: enabled (after initialization) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC: Unable to calibrate against PIT [ 0.000000] TSC: using PMTIMER reference calibration [ 0.000000] Detected 2161.234 MHz processor. [ 0.010000] Console: colour dummy device 80x25 [ 0.010000] console [tty0] enabled [ 0.010000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.010000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.010000] Scanning for low memory corruption every 60 seconds [ 0.010000] Memory: 1017932k/1033128k available (2803k kernel code, 14344k reserved, 1506k data, 404k init, 123824k highmem) [ 0.010000] virtual kernel memory layout: [ 0.010000] fixmap : 0xfff82000 - 0xfffff000 ( 500 kB) [ 0.010000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.010000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.010000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.010000] .init : 0xc053c000 - 0xc05a1000 ( 404 kB) [ 0.010000] .data : 0xc03bce25 - 0xc05357c4 (1506 kB) [ 0.010000] .text : 0xc0100000 - 0xc03bce25 (2803 kB) [ 0.010000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.010000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.010000] hpet clockevent registered [ 0.010000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4322.46 BogoMIPS (lpj=21612340) [ 0.010000] Security Framework initialized [ 0.010000] SELinux: Initializing. [ 0.010000] SELinux: Starting in enforcing mode [ 0.010000] Failure registering Root Plug module with the kernel [ 0.010000] Mount-cache hash table entries: 512 [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 4096K [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 0 [ 0.010000] Intel machine check architecture supported. [ 0.010000] Intel machine check reporting enabled on CPU#0. [ 0.010000] using mwait in idle threads. [ 0.010000] Checking 'hlt' instruction... OK. [ 0.040981] ACPI: Core revision 20080926 [ 0.059983] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.160024] CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06 [ 0.170000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] Calibrating delay using timer specific routine.. 4322.51 BogoMIPS (lpj=21612585) [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 4096K [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 1 [ 0.010000] Intel machine check architecture supported. [ 0.010000] Intel machine check reporting enabled on CPU#1. [ 0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.321697] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06 [ 0.321730] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.330021] Brought up 2 CPUs [ 0.330026] Total of 2 processors activated (8644.98 BogoMIPS). [ 0.330093] CPU0 attaching sched-domain: [ 0.330098] domain 0: span 0-1 level MC [ 0.330102] groups: 0 1 [ 0.330110] CPU1 attaching sched-domain: [ 0.330114] domain 0: span 0-1 level MC [ 0.330117] groups: 1 0 [ 0.330201] net_namespace: 540 bytes [ 0.330201] Booting paravirtualized kernel on bare hardware [ 0.330315] NET: Registered protocol family 16 [ 0.330315] EISA bus registered [ 0.330315] ACPI: bus type pci registered [ 0.330315] PCI: Using configuration type 1 for base access [ 0.341034] ACPI: EC: EC description table is found, configuring boot EC [ 0.341274] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.352666] ACPI: BIOS _OSI(Linux) query ignored via DMI [ 0.353751] ACPI: Interpreter enabled [ 0.353757] ACPI: (supports S0 S3 S4 S5) [ 0.353830] ACPI: Using IOAPIC for interrupt routing [ 0.380295] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.380295] ACPI: EC: driver started in interrupt mode [ 0.380412] ACPI: No dock devices found. [ 0.380439] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.380498] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.380498] pci 0000:00:01.0: PME# disabled [ 0.380498] pci 0000:00:07.0: reg 10 32bit mmio: [0x50404000-0x50404fff] [ 0.380498] pci 0000:00:1b.0: reg 10 64bit mmio: [0x50400000-0x50403fff] [ 0.380498] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.380498] pci 0000:00:1b.0: PME# disabled [ 0.380498] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.380498] pci 0000:00:1c.0: PME# disabled [ 0.380498] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.380498] pci 0000:00:1c.1: PME# disabled [ 0.380507] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.380513] pci 0000:00:1c.2: PME# disabled [ 0.380584] pci 0000:00:1d.0: reg 20 io port: [0x4080-0x409f] [ 0.380652] pci 0000:00:1d.1: reg 20 io port: [0x4060-0x407f] [ 0.380720] pci 0000:00:1d.2: reg 20 io port: [0x4040-0x405f] [ 0.380787] pci 0000:00:1d.3: reg 20 io port: [0x4020-0x403f] [ 0.380858] pci 0000:00:1d.7: reg 10 32bit mmio: [0x50405400-0x504057ff] [ 0.380907] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.380915] pci 0000:00:1d.7: PME# disabled [ 0.381081] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.381088] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO [ 0.381147] pci 0000:00:1f.1: reg 10 io port: [0x40d8-0x40df] [ 0.381157] pci 0000:00:1f.1: reg 14 io port: [0x40ec-0x40ef] [ 0.381167] pci 0000:00:1f.1: reg 18 io port: [0x40d0-0x40d7] [ 0.381176] pci 0000:00:1f.1: reg 1c io port: [0x40e8-0x40eb] [ 0.381186] pci 0000:00:1f.1: reg 20 io port: [0x40b0-0x40bf] [ 0.381244] pci 0000:00:1f.2: reg 10 io port: [0x40c8-0x40cf] [ 0.381254] pci 0000:00:1f.2: reg 14 io port: [0x40e4-0x40e7] [ 0.381263] pci 0000:00:1f.2: reg 18 io port: [0x40c0-0x40c7] [ 0.381272] pci 0000:00:1f.2: reg 1c io port: [0x40e0-0x40e3] [ 0.381282] pci 0000:00:1f.2: reg 20 io port: [0x40a0-0x40af] [ 0.381291] pci 0000:00:1f.2: reg 24 32bit mmio: [0x50405000-0x504053ff] [ 0.381312] pci 0000:00:1f.2: PME# supported from D3hot [ 0.381318] pci 0000:00:1f.2: PME# disabled [ 0.381386] pci 0000:00:1f.3: reg 20 io port: [0xefa0-0xefbf] [ 0.381453] pci 0000:01:00.0: reg 10 32bit mmio: [0x40000000-0x47ffffff] [ 0.381463] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff] [ 0.381473] pci 0000:01:00.0: reg 18 32bit mmio: [0x50300000-0x5030ffff] [ 0.381495] pci 0000:01:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff] [ 0.381507] pci 0000:01:00.0: supports D1 D2 [ 0.381567] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff] [ 0.381572] pci 0000:00:01.0: bridge 32bit mmio: [0x50300000-0x503fffff] [ 0.381579] pci 0000:00:01.0: bridge 64bit mmio pref: [0x40000000-0x47ffffff] [ 0.381663] pci 0000:02:00.0: reg 10 64bit mmio: [0x50200000-0x50203fff] [ 0.381675] pci 0000:02:00.0: reg 18 io port: [0x2000-0x20ff] [ 0.381713] pci 0000:02:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff] [ 0.381730] pci 0000:02:00.0: supports D1 D2 [ 0.381733] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.381741] pci 0000:02:00.0: PME# disabled [ 0.381804] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] [ 0.381810] pci 0000:00:1c.0: bridge 32bit mmio: [0x50200000-0x502fffff] [ 0.381901] pci 0000:03:00.0: reg 10 64bit mmio: [0x50100000-0x5010ffff] [ 0.381960] pci 0000:03:00.0: supports D1 [ 0.381963] pci 0000:03:00.0: PME# supported from D0 D1 D3hot [ 0.381971] pci 0000:03:00.0: PME# disabled [ 0.382047] pci 0000:00:1c.1: bridge 32bit mmio: [0x50100000-0x501fffff] [ 0.382116] pci 0000:00:1c.2: bridge io port: [0x1000-0x1fff] [ 0.382122] pci 0000:00:1c.2: bridge 32bit mmio: [0x4c100000-0x500fffff] [ 0.382132] pci 0000:00:1c.2: bridge 64bit mmio pref: [0x48000000-0x4bffffff] [ 0.382194] pci 0000:0c:03.0: reg 10 32bit mmio: [0x4c004000-0x4c0047ff] [ 0.382205] pci 0000:0c:03.0: reg 14 32bit mmio: [0x4c000000-0x4c003fff] [ 0.382257] pci 0000:0c:03.0: supports D1 D2 [ 0.382261] pci 0000:0c:03.0: PME# supported from D0 D1 D2 D3hot [ 0.382268] pci 0000:0c:03.0: PME# disabled [ 0.382329] pci 0000:00:1e.0: transparent bridge [ 0.382338] pci 0000:00:1e.0: bridge 32bit mmio: [0x4c000000-0x4c0fffff] [ 0.382376] bus 00 -> node 0 [ 0.382389] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.384258] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.384857] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.390565] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.391158] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.391770] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.411117] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.411117] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.411117] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.411117] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.411353] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.411641] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.411932] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.412214] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) [ 0.412326] SCSI subsystem initialized [ 0.412326] libata version 3.00 loaded. [ 0.412326] usbcore: registered new interface driver usbfs [ 0.412326] usbcore: registered new interface driver hub [ 0.412326] usbcore: registered new device driver usb [ 0.412326] PCI: Using ACPI for IRQ routing [ 0.412326] PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified [ 0.412326] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.412326] pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.412326] pci 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.412326] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.412326] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.412326] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.412326] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.412326] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.412326] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.412326] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.412326] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.412326] pci 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.412326] pci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.412326] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.412326] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.412326] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.412326] pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.412326] pci 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.440079] cfg80211: Using static regulatory domain info [ 0.440079] cfg80211: Regulatory domain: US [ 0.440079] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 0.440079] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 0.440079] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.440079] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.440079] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.440079] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.440082] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 0.440087] cfg80211: Calling CRDA for country: US [ 0.440112] NetLabel: Initializing [ 0.440112] NetLabel: domain hash size = 128 [ 0.440112] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.440134] NetLabel: unlabeled traffic allowed by default [ 0.440148] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.440155] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.470028] pnp: PnP ACPI: disabled [ 0.501757] Switched to high resolution mode on CPU 1 [ 0.505968] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.505975] pci 0000:00:01.0: IO window: 0x3000-0x3fff [ 0.505981] pci 0000:00:01.0: MEM window: 0x50300000-0x503fffff [ 0.505987] pci 0000:00:01.0: PREFETCH window: 0x00000040000000-0x00000047ffffff [ 0.505995] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.506000] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.506008] pci 0000:00:1c.0: MEM window: 0x50200000-0x502fffff [ 0.506015] pci 0000:00:1c.0: PREFETCH window: 0x00000050500000-0x000000505fffff [ 0.506026] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.506029] pci 0000:00:1c.1: IO window: disabled [ 0.506037] pci 0000:00:1c.1: MEM window: 0x50100000-0x501fffff [ 0.506044] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.506053] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 [ 0.506058] pci 0000:00:1c.2: IO window: 0x1000-0x1fff [ 0.506066] pci 0000:00:1c.2: MEM window: 0x4c100000-0x500fffff [ 0.506073] pci 0000:00:1c.2: PREFETCH window: 0x00000048000000-0x0000004bffffff [ 0.506083] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c [ 0.506087] pci 0000:00:1e.0: IO window: disabled [ 0.506094] pci 0000:00:1e.0: MEM window: 0x4c000000-0x4c0fffff [ 0.506101] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.506115] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.506121] pci 0000:00:01.0: setting latency timer to 64 [ 0.506130] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.506137] pci 0000:00:1c.0: setting latency timer to 64 [ 0.506147] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.506154] pci 0000:00:1c.1: setting latency timer to 64 [ 0.506164] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.506171] pci 0000:00:1c.2: setting latency timer to 64 [ 0.506333] pci 0000:00:1e.0: power state changed by ACPI to D0 [ 0.506343] pci 0000:00:1e.0: setting latency timer to 64 [ 0.506348] bus: 00 index 0 io port: [0x00-0xffff] [ 0.506352] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 0.506356] bus: 01 index 0 io port: [0x3000-0x3fff] [ 0.506360] bus: 01 index 1 mmio: [0x50300000-0x503fffff] [ 0.506363] bus: 01 index 2 mmio: [0x40000000-0x47ffffff] [ 0.506367] bus: 01 index 3 mmio: [0x0-0x0] [ 0.506370] bus: 02 index 0 io port: [0x2000-0x2fff] [ 0.506374] bus: 02 index 1 mmio: [0x50200000-0x502fffff] [ 0.506377] bus: 02 index 2 mmio: [0x50500000-0x505fffff] [ 0.506381] bus: 02 index 3 mmio: [0x0-0x0] [ 0.506384] bus: 03 index 0 mmio: [0x0-0x0] [ 0.506388] bus: 03 index 1 mmio: [0x50100000-0x501fffff] [ 0.506391] bus: 03 index 2 mmio: [0x0-0x0] [ 0.506394] bus: 03 index 3 mmio: [0x0-0x0] [ 0.506398] bus: 04 index 0 io port: [0x1000-0x1fff] [ 0.506401] bus: 04 index 1 mmio: [0x4c100000-0x500fffff] [ 0.506405] bus: 04 index 2 mmio: [0x48000000-0x4bffffff] [ 0.506408] bus: 04 index 3 mmio: [0x0-0x0] [ 0.506412] bus: 0c index 0 mmio: [0x0-0x0] [ 0.506415] bus: 0c index 1 mmio: [0x4c000000-0x4c0fffff] [ 0.506418] bus: 0c index 2 mmio: [0x0-0x0] [ 0.506422] bus: 0c index 3 io port: [0x00-0xffff] [ 0.506425] bus: 0c index 4 mmio: [0x000000-0xffffffff] [ 0.506438] NET: Registered protocol family 2 [ 0.510003] Switched to high resolution mode on CPU 0 [ 0.540078] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.540399] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.540840] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) [ 0.541390] TCP: Hash tables configured (established 131072 bind 65536) [ 0.541394] TCP reno registered [ 0.550151] NET: Registered protocol family 1 [ 0.551152] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.553232] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 0.554637] Initializing RT-Tester: OK [ 0.554750] audit: initializing netlink socket (enabled) [ 0.554815] type=2000 audit(1226769894.551:1): initialized [ 0.559731] highmem bounce pool size: 64 pages [ 0.559739] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.575785] fuse init (API version 7.10) [ 0.576379] msgmni has been set to 1747 [ 0.576629] SELinux: Registering netfilter hooks [ 0.577374] alg: No test for stdrng (krng) [ 0.577395] io scheduler noop registered [ 0.577737] io scheduler cfq registered (default) [ 0.577896] pci 0000:01:00.0: Boot video device [ 0.594155] vesafb: framebuffer at 0x40000000, mapped to 0xf8100000, using 3072k, total 16384k [ 0.594162] vesafb: mode is 1024x768x16, linelength=2048, pages=9 [ 0.594165] vesafb: protected mode interface info at c000:ad0c [ 0.594170] vesafb: pmi: set display start = c00cad94, set palette = c00cae50 [ 0.594173] vesafb: scrolling: redraw [ 0.594177] vesafb: Truecolor: size=0:5:5:5, shift=0:10:5:0 [ 0.618512] Console: switching to colour frame buffer device 128x48 [ 0.641427] fb0: VESA VGA frame buffer device [ 0.654901] loop: module loaded [ 0.655053] Linux video capture interface: v2.00 [ 0.655511] input: Macintosh mouse button emulation as /class/input/input0 [ 0.656121] Driver 'sd' needs updating - please use bus_type methods [ 0.656506] Driver 'sr' needs updating - please use bus_type methods [ 0.657135] ata_piix 0000:00:1f.1: version 2.12 [ 0.657437] ata_piix 0000:00:1f.1: power state changed by ACPI to D0 [ 0.657734] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.658105] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.658469] scsi0 : ata_piix [ 0.659104] scsi1 : ata_piix [ 0.661234] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14 [ 0.661553] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15 [ 0.840579] ata1.00: ATAPI: MATSHITADVD-R UJ-857D, KCV9, max UDMA/66 [ 0.880537] ata1.00: configured for UDMA/66 [ 1.052797] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-857D KCV9 PQ: 0 ANSI: 5 [ 1.057530] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 1.066242] Uniform CD-ROM driver Revision: 3.20 [ 1.075109] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.083810] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.092114] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.100440] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ] [ 1.260015] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.268345] scsi2 : ata_piix [ 1.276627] scsi3 : ata_piix [ 1.288288] ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19 [ 1.296463] ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19 [ 1.490503] ata3.01: ATA-8: FUJITSU MHW2120BH, 00810013, max UDMA/100 [ 1.498569] ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.540527] ata3.01: configured for UDMA/100 [ 1.711229] scsi 2:0:1:0: Direct-Access ATA FUJITSU MHW2120B 0081 PQ: 0 ANSI: 5 [ 1.719962] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 1.728565] sd 2:0:1:0: [sda] Write Protect is off [ 1.737060] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 1.745473] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.754077] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 1.762586] sd 2:0:1:0: [sda] Write Protect is off [ 1.770973] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 1.779292] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.787831] sda: sda1 sda2 [ 1.797001] sd 2:0:1:0: [sda] Attached SCSI disk [ 1.805647] sd 2:0:1:0: Attached scsi generic sg1 type 0 [ 1.814091] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.822598] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.831216] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.839671] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.848138] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.860627] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.868987] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.877512] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x50405400 [ 1.900008] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.908638] usb usb1: configuration #1 chosen from 1 choice [ 1.917167] hub 1-0:1.0: USB hub found [ 1.925659] hub 1-0:1.0: 8 ports detected [ 1.934735] usbcore: registered new interface driver usblcd [ 1.943399] usbcore: registered new interface driver usbled [ 1.952117] PNP: No PS/2 controller found. Probing ports directly. [ 1.961400] i8042.c: No controller found. [ 1.980234] mice: PS/2 mouse device common for all mice [ 1.989184] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 1.997637] EDAC MC: Ver: 2.1.0 Nov 15 2008 [ 2.006488] cpuidle: using governor ladder [ 2.014953] cpuidle: using governor menu [ 2.025284] usbcore: registered new interface driver hiddev [ 2.033742] usbcore: registered new interface driver usbhid [ 2.042011] usbhid: v2.6:USB HID core driver [ 2.050334] Advanced Linux Sound Architecture Driver Version 1.0.18rc3. [ 2.058828] ALSA device list: [ 2.067170] No soundcards found. [ 2.075763] oprofile: using NMI interrupt. [ 2.084430] IPVS: Registered protocols (TCP, AH, ESP) [ 2.092971] IPVS: Connection hash table configured (size=4096, memory=32Kbytes) [ 2.101501] IPVS: ipvs loaded. [ 2.110111] Initializing XFRM netlink socket [ 2.118315] NET: Registered protocol family 17 [ 2.126485] NET: Registered protocol family 15 [ 2.134568] Using IPI No-Shortcut mode [ 2.172104] kjournald starting. Commit interval 5 seconds [ 2.172114] EXT3-fs: mounted filesystem with ordered data mode. [ 2.172145] VFS: Mounted root (ext3 filesystem) readonly. [ 2.172451] Freeing unused kernel memory: 404k freed [ 2.380013] usb 1-4: new high speed USB device using ehci_hcd and address 3 [ 2.530913] usb 1-4: configuration #1 chosen from 1 choice [ 2.826237] SELinux: 8192 avtab hash slots, 173318 rules. [ 2.941220] SELinux: 8192 avtab hash slots, 173318 rules. [ 3.145354] SELinux: 7 users, 9 roles, 3230 types, 100 bools, 1 sens, 256 cats [ 3.153261] SELinux: 73 classes, 173318 rules [ 3.168593] SELinux: Completing initialization. [ 3.176391] SELinux: Setting up existing superblocks. [ 3.221799] SELinux: initialized (dev sda1, type ext3), uses xattr [ 3.372850] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts [ 3.380754] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts [ 3.388726] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 3.396772] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts [ 3.404800] SELinux: initialized (dev devpts, type devpts), uses transition SIDs [ 3.412835] SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts [ 3.420996] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 3.429134] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts [ 3.437555] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs [ 3.445901] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts [ 3.454255] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs [ 3.462575] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 3.470745] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts [ 3.478626] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts [ 3.486596] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 3.535780] type=1403 audit(1226769897.530:2): policy loaded auid=4294967295 ses=4294967295 [ 4.218475] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 4.389912] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 4.403048] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 9.890287] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 10.809281] ACPI: SSDT 3FEB8C10, 02AE (r1 APPLE Cpu0Ist 3000 INTL 20050309) [ 10.828110] ACPI: SSDT 3FEB8910, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309) [ 10.838038] Monitor-Mwait will be used to enter C-1 state [ 10.847062] Monitor-Mwait will be used to enter C-2 state [ 10.855720] Monitor-Mwait will be used to enter C-3 state [ 10.864323] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 10.872861] processor ACPI_CPU:00: registered as cooling_device0 [ 10.881525] ACPI: Processor [CPU0] (supports 8 throttling states) [ 10.899771] Marking TSC unstable due to TSC halts in idle [ 10.908404] ACPI: SSDT 3FEB8F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309) [ 10.918703] ACPI: SSDT 3FEB7F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309) [ 10.928192] power_supply ADP1: uevent [ 10.936987] power_supply ADP1: No power supply yet [ 10.945887] power_supply ADP1: power_supply_changed [ 10.954553] ACPI: AC Adapter [ADP1] (on-line) [ 10.963379] power_supply ADP1: power_supply_changed_work [ 10.971950] power_supply ADP1: power_supply_update_gen_leds 1 [ 10.980540] power_supply ADP1: uevent [ 10.988870] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 [ 10.997142] power_supply ADP1: Static prop TYPE=Mains [ 10.997145] power_supply ADP1: 1 dynamic props [ 10.997147] power_supply ADP1: prop ONLINE=1 [ 10.998204] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 10.998268] processor ACPI_CPU:01: registered as cooling_device1 [ 10.998274] ACPI: Processor [CPU1] (supports 8 throttling states) [ 11.046477] input: Power Button (FF) as /class/input/input1 [ 11.112741] ACPI: Power Button (FF) [PWRF] [ 11.212691] ACPI Warning (nspredef-0858): \_SB_.BAT0._BIF: Return Package type mismatch at index 9 - found Buffer, expected String [20080926] [ 11.229414] power_supply BAT0: uevent [ 11.237531] power_supply BAT0: No power supply yet [ 11.245883] power_supply BAT0: power_supply_changed [ 11.254623] power_supply BAT0: power_supply_changed_work [ 11.264216] uhci_hcd: USB Universal Host Controller Interface driver [ 11.272872] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 11.281361] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 11.289651] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 11.297990] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 11.306141] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080 [ 11.314522] usb usb2: configuration #1 chosen from 1 choice [ 11.322613] hub 2-0:1.0: USB hub found [ 11.330342] hub 2-0:1.0: 2 ports detected [ 11.338300] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 11.346133] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 11.353929] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 11.361655] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 11.369609] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060 [ 11.377821] usb usb3: configuration #1 chosen from 1 choice [ 11.385880] hub 3-0:1.0: USB hub found [ 11.393722] hub 3-0:1.0: 2 ports detected [ 11.405933] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 11.413820] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 11.421509] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 11.429339] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 11.437244] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040 [ 11.445220] usb usb4: configuration #1 chosen from 1 choice [ 11.453218] hub 4-0:1.0: USB hub found [ 11.461007] hub 4-0:1.0: 2 ports detected [ 11.468956] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 11.476986] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 11.484933] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 11.492951] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 11.501149] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020 [ 11.509430] usb usb5: configuration #1 chosen from 1 choice [ 11.517811] hub 5-0:1.0: USB hub found [ 11.525960] hub 5-0:1.0: 2 ports detected [ 11.554543] ACPI: Battery Slot [BAT0] (battery present) [ 11.562729] input: Lid Switch as /class/input/input2 [ 11.575881] ACPI: Lid Switch [LID0] [ 11.583988] input: Power Button (CM) as /class/input/input3 [ 11.592601] ACPI: Power Button (CM) [PWRB] [ 11.600244] input: Sleep Button (CM) as /class/input/input4 [ 11.608758] ACPI: Sleep Button (CM) [SLPB] [ 11.638685] ath9k: 0.1 [ 11.646497] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 11.654479] ath9k 0000:03:00.0: setting latency timer to 64 [ 11.791997] phy0: Selected rate control algorithm 'ath9k_rate_control' [ 11.807396] Registered led device: ath9k-phy0:radio [ 11.815386] Registered led device: ath9k-phy0:assoc [ 11.823321] Registered led device: ath9k-phy0:tx [ 11.831102] Registered led device: ath9k-phy0:rx [ 11.839519] phy0: Atheros 5416: mem=0xf8900000, irq=17 [ 11.851344] power_supply BAT0: power_supply_update_bat_leds 4 [ 11.859233] power_supply BAT0: uevent [ 11.866945] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 [ 11.874624] power_supply BAT0: Static prop TYPE=Battery [ 11.882231] power_supply BAT0: 12 dynamic props [ 11.889693] power_supply BAT0: prop STATUS=Full [ 11.897275] power_supply BAT0: prop PRESENT=1 [ 11.904640] power_supply BAT0: prop TECHNOLOGY=Unknown [ 11.911888] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 [ 11.919038] power_supply BAT0: prop VOLTAGE_NOW=12553000 [ 11.926141] power_supply BAT0: prop CURRENT_NOW=0 [ 11.933196] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 [ 11.940129] power_supply BAT0: prop ENERGY_FULL=51200000 [ 11.946969] power_supply BAT0: prop ENERGY_NOW=51070000 [ 11.953815] power_supply BAT0: prop MODEL_NAME=ASMB012 [ 11.960457] power_supply BAT0: prop MANUFACTURER=SMPN012 [ 11.966958] power_supply BAT0: prop SERIAL_NUMBER= [ 11.989847] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501) [ 11.999077] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26). [ 12.007914] input: Built-in iSight as /class/input/input5 [ 12.016019] firewire_ohci 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 12.030187] usbcore: registered new interface driver uvcvideo [ 12.037355] USB Video Class driver (v0.1.0) [ 12.093463] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 12.100767] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 12.120030] firewire_ohci: Added fw-ohci device 0000:0c:03.0, OHCI version 1.10 [ 12.181679] hda_codec: STAC922x, Apple subsys_id=106b1e00 [ 12.190149] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 12.349530] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 12.403261] usb 2-2: configuration #1 chosen from 1 choice [ 12.425653] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input6 [ 12.446513] applesmc: Apple MacBook Pro detected: [ 12.454510] applesmc: - Model with accelerometer [ 12.462616] applesmc: - Model with light sensors and backlight [ 12.470779] applesmc: - Model with 12 temperature sensors [ 12.479798] applesmc: device has already been initialized (0xe0, 0x00). [ 12.487993] applesmc: device successfully initialized. [ 12.496634] applesmc: 2 fans found. [ 12.506044] input: applesmc as /class/input/input7 [ 12.523243] apple 0003:05AC:021A.0001: input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input0 [ 12.543400] Registered led device: smc::kbd_backlight [ 12.552831] applesmc: driver successfully loaded. [ 12.565449] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input8 [ 12.592763] apple 0003:05AC:021A.0002: input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input2 [ 12.617343] appletouch: Geyser mode initialized. [ 12.627812] input: appletouch as /class/input/input9 [ 12.638217] firewire_core: created device fw0: GUID 0019e3fffe2ad87e, S800 [ 12.660317] usbcore: registered new interface driver appletouch [ 12.732029] usb 4-2: new full speed USB device using uhci_hcd and address 2 [ 12.783111] Linux agpgart interface v0.103 [ 12.890520] [drm] Initialized drm 1.1.0 20060810 [ 12.941609] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 12.952380] pci 0000:01:00.0: setting latency timer to 64 [ 12.963154] usb 4-2: configuration #1 chosen from 1 choice [ 12.963238] [drm] Initialized radeon 1.29.0 20080528 on minor 0 [ 13.009191] generic-usb 0003:05AC:8240.0003: hiddev0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2/input0 [ 13.121044] ip_tables: (C) 2000-2006 Netfilter Core Team [ 13.150169] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 13.243763] nf_conntrack version 0.5.0 (16142 buckets, 64568 max) [ 13.255002] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 13.265996] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or [ 13.277053] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 13.334119] arp_tables: (C) 2002 David S. Miller [ 13.372834] usb 5-1: configuration #1 chosen from 1 choice [ 13.412674] input: HID 05ac:1000 as /class/input/input10 [ 13.424464] ieee80211_crypt: registered algorithm 'NULL' [ 13.442742] generic-usb 0003:05AC:1000.0004: input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1/input0 [ 13.472455] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 13.484004] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> [ 13.495914] input: HID 05ac:1000 as /class/input/input11 [ 13.514783] generic-usb 0003:05AC:1000.0005: input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1/input1 [ 13.530797] ieee80211_crypt: registered algorithm 'TKIP' [ 13.611073] usbcore: registered new interface driver isight_firmware [ 13.666932] ipmi message handler version 39.2 [ 13.696864] IPMI Watchdog: driver initialized [ 13.932833] Adding 2988360k swap on /dev/sda2. Priority:-1 extents:1 across:2988360k [ 14.330470] EXT3 FS on sda1, internal journal [ 17.680670] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 18.357906] applesmc: light sensor data length set to 6 [ 19.942227] Bluetooth: Core ver 2.13 [ 19.942254] usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84 [ 19.953553] NET: Registered protocol family 31 [ 19.953558] Bluetooth: HCI device and connection manager initialized [ 19.953564] Bluetooth: HCI socket layer initialized [ 19.989838] Bluetooth: L2CAP ver 2.11 [ 19.989844] Bluetooth: L2CAP socket layer initialized [ 20.029276] Bluetooth: SCO (Voice Link) ver 0.6 [ 20.029282] Bluetooth: SCO socket layer initialized [ 20.061639] Bluetooth: RFCOMM socket layer initialized [ 20.061670] Bluetooth: RFCOMM TTY layer initialized [ 20.061674] Bluetooth: RFCOMM ver 1.10 [ 20.096698] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.096704] Bluetooth: BNEP filters: protocol multicast [ 20.250184] usb 5-1: USB disconnect, address 2 [ 20.582553] usb 5-1: new full speed USB device using uhci_hcd and address 3 [ 20.800317] usb 5-1: configuration #1 chosen from 1 choice [ 20.872922] Bluetooth: Generic Bluetooth USB driver ver 0.3 [ 20.873117] usbcore: registered new interface driver btusb [ 26.756982] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 26.763774] input: justinmattock’s mouse #1 as /class/input/input12 [ 26.800198] generic-bluetooth 0005:0000:0000.0006: input: BLUETOOTH HID v0.00 Mouse [justinmattock’s mouse #1] on 00:17:F2:B4:BC:F5 [ 30.933860] [drm] Setting GART location based on new memory map [ 30.935403] [drm] Loading R500 Microcode [ 30.935455] [drm] Num pipes: 1 [ 30.935469] [drm] writeback test succeeded in 1 usecs [ 139.158734] wlan0: authenticate with AP 00:1e:2a:00:67:f0 [ 139.162342] wlan0: authenticated [ 139.162350] wlan0: associate with AP 00:1e:2a:00:67:f0 [ 139.164731] wlan0: RX AssocResp from 00:1e:2a:00:67:f0 (capab=0x431 status=0 aid=34) [ 139.164736] wlan0: associated [ 164.607065] wlan0: No ProbeResp from current AP 00:1e:2a:00:67:f0 - assume out of range [ 166.197747] wlan0: authenticate with AP 00:1e:2a:00:67:f0 [ 166.201748] wlan0: authenticate with AP 00:1e:2a:00:67:f0 [ 166.400040] wlan0: authenticate with AP 00:1e:2a:00:67:f0 [ 166.600082] wlan0: authenticate with AP 00:1e:2a:00:67:f0 [ 166.800075] wlan0: authentication with AP 00:1e:2a:00:67:f0 timed out [ 177.917788] wlan0: authenticate with AP 00:1e:2a:00:67:f0 [ 177.922184] wlan0: authenticate with AP 00:1e:2a:00:67:f0 [ 178.120078] wlan0: authenticate with AP 00:1e:2a:00:67:f0 [ 178.320082] wlan0: authenticate with AP 00:1e:2a:00:67:f0 [ 178.520083] wlan0: authentication with AP 00:1e:2a:00:67:f0 timed out [ 183.127053] wlan0: authenticate with AP 00:1e:2a:00:67:f0 [ 183.128524] wlan0: authenticated [ 183.128531] wlan0: associate with AP 00:1e:2a:00:67:f0 [ 183.132774] wlan0: RX AssocResp from 00:1e:2a:00:67:f0 (capab=0x431 status=0 aid=34) [ 183.132779] wlan0: associated [ 242.724073] power_supply ADP1: uevent [ 242.724080] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 [ 242.724092] power_supply ADP1: Static prop TYPE=Mains [ 242.724098] power_supply ADP1: 1 dynamic props [ 242.724104] power_supply ADP1: prop ONLINE=0 [ 242.966898] power_supply BAT0: uevent [ 242.966904] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 [ 242.966914] power_supply BAT0: Static prop TYPE=Battery [ 242.966921] power_supply BAT0: 12 dynamic props [ 242.966927] power_supply BAT0: prop STATUS=Discharging [ 242.966935] power_supply BAT0: prop PRESENT=1 [ 242.966943] power_supply BAT0: prop TECHNOLOGY=Unknown [ 242.966950] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 [ 242.966957] power_supply BAT0: prop VOLTAGE_NOW=12556000 [ 242.966964] power_supply BAT0: prop CURRENT_NOW=0 [ 242.966971] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 [ 242.966978] power_supply BAT0: prop ENERGY_FULL=51200000 [ 242.966985] power_supply BAT0: prop ENERGY_NOW=51070000 [ 242.966992] power_supply BAT0: prop MODEL_NAME=ASMB012 [ 242.966999] power_supply BAT0: prop MANUFACTURER=SMPN012 [ 242.967005] power_supply BAT0: prop SERIAL_NUMBER= [ 245.489745] power_supply ADP1: uevent [ 245.489751] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 [ 245.489764] power_supply ADP1: Static prop TYPE=Mains [ 245.489770] power_supply ADP1: 1 dynamic props [ 245.489776] power_supply ADP1: prop ONLINE=1 [ 245.746866] power_supply BAT0: uevent [ 245.746872] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 [ 245.746885] power_supply BAT0: Static prop TYPE=Battery [ 245.746892] power_supply BAT0: 12 dynamic props [ 245.746898] power_supply BAT0: prop STATUS=Full [ 245.746906] power_supply BAT0: prop PRESENT=1 [ 245.746914] power_supply BAT0: prop TECHNOLOGY=Unknown [ 245.746922] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 [ 245.746929] power_supply BAT0: prop VOLTAGE_NOW=12326000 [ 245.746935] power_supply BAT0: prop CURRENT_NOW=24220000 [ 245.746942] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 [ 245.746949] power_supply BAT0: prop ENERGY_FULL=51200000 [ 245.746955] power_supply BAT0: prop ENERGY_NOW=51070000 [ 245.746962] power_supply BAT0: prop MODEL_NAME=ASMB012 [ 245.746968] power_supply BAT0: prop MANUFACTURER=SMPN012 [ 245.746975] power_supply BAT0: prop SERIAL_NUMBER= [ 365.343178] power_supply ADP1: uevent [ 365.343184] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 [ 365.343197] power_supply ADP1: Static prop TYPE=Mains [ 365.343203] power_supply ADP1: 1 dynamic props [ 365.343210] power_supply ADP1: prop ONLINE=0 [ 365.595087] power_supply BAT0: uevent [ 365.595094] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 [ 365.595107] power_supply BAT0: Static prop TYPE=Battery [ 365.595113] power_supply BAT0: 12 dynamic props [ 365.595120] power_supply BAT0: prop STATUS=Discharging [ 365.595128] power_supply BAT0: prop PRESENT=1 [ 365.595136] power_supply BAT0: prop TECHNOLOGY=Unknown [ 365.595145] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 [ 365.595152] power_supply BAT0: prop VOLTAGE_NOW=12555000 [ 365.595160] power_supply BAT0: prop CURRENT_NOW=0 [ 365.595167] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 [ 365.595174] power_supply BAT0: prop ENERGY_FULL=51200000 [ 365.595182] power_supply BAT0: prop ENERGY_NOW=51070000 [ 365.595190] power_supply BAT0: prop MODEL_NAME=ASMB012 [ 365.595197] power_supply BAT0: prop MANUFACTURER=SMPN012 [ 365.595204] power_supply BAT0: prop SERIAL_NUMBER= [ 402.553577] power_supply ADP1: uevent [ 402.553583] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 [ 402.553596] power_supply ADP1: Static prop TYPE=Mains [ 402.553603] power_supply ADP1: 1 dynamic props [ 402.553609] power_supply ADP1: prop ONLINE=1 [ 402.797176] power_supply BAT0: uevent [ 402.797179] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 [ 402.797186] power_supply BAT0: Static prop TYPE=Battery [ 402.797189] power_supply BAT0: 12 dynamic props [ 402.797192] power_supply BAT0: prop STATUS=Full [ 402.797195] power_supply BAT0: prop PRESENT=1 [ 402.797199] power_supply BAT0: prop TECHNOLOGY=Unknown [ 402.797203] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 [ 402.797207] power_supply BAT0: prop VOLTAGE_NOW=12234000 [ 402.797210] power_supply BAT0: prop CURRENT_NOW=25740000 [ 402.797214] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 [ 402.797217] power_supply BAT0: prop ENERGY_FULL=51200000 [ 402.797221] power_supply BAT0: prop ENERGY_NOW=50850000 [ 402.797224] power_supply BAT0: prop MODEL_NAME=ASMB012 [ 402.797228] power_supply BAT0: prop MANUFACTURER=SMPN012 [ 402.797231] power_supply BAT0: prop SERIAL_NUMBER= [ 446.900319] power_supply ADP1: uevent [ 446.900325] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 [ 446.900337] power_supply ADP1: Static prop TYPE=Mains [ 446.900343] power_supply ADP1: 1 dynamic props [ 446.900349] power_supply ADP1: prop ONLINE=0 [ 447.174427] power_supply BAT0: uevent [ 447.174433] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 [ 447.174444] power_supply BAT0: Static prop TYPE=Battery [ 447.174451] power_supply BAT0: 12 dynamic props [ 447.174456] power_supply BAT0: prop STATUS=Discharging [ 447.174465] power_supply BAT0: prop PRESENT=1 [ 447.174473] power_supply BAT0: prop TECHNOLOGY=Unknown [ 447.174481] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 [ 447.174488] power_supply BAT0: prop VOLTAGE_NOW=12515000 [ 447.174496] power_supply BAT0: prop CURRENT_NOW=0 [ 447.174503] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 [ 447.174511] power_supply BAT0: prop ENERGY_FULL=51200000 [ 447.174518] power_supply BAT0: prop ENERGY_NOW=50850000 [ 447.174526] power_supply BAT0: prop MODEL_NAME=ASMB012 [ 447.174533] power_supply BAT0: prop MANUFACTURER=SMPN012 [ 447.174540] power_supply BAT0: prop SERIAL_NUMBER= [ 516.558893] power_supply ADP1: uevent [ 516.558899] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 [ 516.558912] power_supply ADP1: Static prop TYPE=Mains [ 516.558919] power_supply ADP1: 1 dynamic props [ 516.558925] power_supply ADP1: prop ONLINE=1 [ 516.804395] power_supply BAT0: uevent [ 516.804401] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 [ 516.804412] power_supply BAT0: Static prop TYPE=Battery [ 516.804419] power_supply BAT0: 12 dynamic props [ 516.804425] power_supply BAT0: prop STATUS=Full [ 516.804433] power_supply BAT0: prop PRESENT=1 [ 516.804441] power_supply BAT0: prop TECHNOLOGY=Unknown [ 516.804450] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 [ 516.804457] power_supply BAT0: prop VOLTAGE_NOW=12195000 [ 516.804464] power_supply BAT0: prop CURRENT_NOW=24255000 [ 516.804472] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 [ 516.804479] power_supply BAT0: prop ENERGY_FULL=51200000 [ 516.804487] power_supply BAT0: prop ENERGY_NOW=50450000 [ 516.804494] power_supply BAT0: prop MODEL_NAME=ASMB012 [ 516.804502] power_supply BAT0: prop MANUFACTURER=SMPN012 [ 516.804509] power_supply BAT0: prop SERIAL_NUMBER= [ 530.258344] power_supply ADP1: uevent [ 530.258349] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 [ 530.258362] power_supply ADP1: Static prop TYPE=Mains [ 530.258368] power_supply ADP1: 1 dynamic props [ 530.258374] power_supply ADP1: prop ONLINE=0 [ 530.524360] power_supply BAT0: uevent [ 530.524366] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 [ 530.524379] power_supply BAT0: Static prop TYPE=Battery [ 530.524386] power_supply BAT0: 12 dynamic props [ 530.524392] power_supply BAT0: prop STATUS=Discharging [ 530.524400] power_supply BAT0: prop PRESENT=1 [ 530.524408] power_supply BAT0: prop TECHNOLOGY=Unknown [ 530.524417] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 [ 530.524424] power_supply BAT0: prop VOLTAGE_NOW=12444000 [ 530.524431] power_supply BAT0: prop CURRENT_NOW=0 [ 530.524439] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 [ 530.524446] power_supply BAT0: prop ENERGY_FULL=51200000 [ 530.524453] power_supply BAT0: prop ENERGY_NOW=50450000 [ 530.524461] power_supply BAT0: prop MODEL_NAME=ASMB012 [ 530.524468] power_supply BAT0: prop MANUFACTURER=SMPN012 [ 530.524475] power_supply BAT0: prop SERIAL_NUMBER= [ 532.316627] power_supply ADP1: uevent [ 532.316633] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 [ 532.316646] power_supply ADP1: Static prop TYPE=Mains [ 532.316652] power_supply ADP1: 1 dynamic props [ 532.316658] power_supply ADP1: prop ONLINE=1 [ 532.574173] power_supply BAT0: uevent [ 532.574179] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 [ 532.574194] power_supply BAT0: Static prop TYPE=Battery [ 532.574200] power_supply BAT0: 12 dynamic props [ 532.574206] power_supply BAT0: prop STATUS=Full [ 532.574214] power_supply BAT0: prop PRESENT=1 [ 532.574223] power_supply BAT0: prop TECHNOLOGY=Unknown [ 532.574231] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 [ 532.574238] power_supply BAT0: prop VOLTAGE_NOW=12224000 [ 532.574246] power_supply BAT0: prop CURRENT_NOW=24350000 [ 532.574253] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 [ 532.574261] power_supply BAT0: prop ENERGY_FULL=51200000 [ 532.574268] power_supply BAT0: prop ENERGY_NOW=50450000 [ 532.574276] power_supply BAT0: prop MODEL_NAME=ASMB012 [ 532.574283] power_supply BAT0: prop MANUFACTURER=SMPN012 [ 532.574290] power_supply BAT0: prop SERIAL_NUMBER= [ 535.102967] power_supply ADP1: uevent [ 535.102973] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 [ 535.102985] power_supply ADP1: Static prop TYPE=Mains [ 535.102992] power_supply ADP1: 1 dynamic props [ 535.102998] power_supply ADP1: prop ONLINE=0 [ 535.343935] power_supply BAT0: uevent [ 535.343940] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 [ 535.343951] power_supply BAT0: Static prop TYPE=Battery [ 535.343958] power_supply BAT0: 12 dynamic props [ 535.343964] power_supply BAT0: prop STATUS=Discharging [ 535.343972] power_supply BAT0: prop PRESENT=1 [ 535.343980] power_supply BAT0: prop TECHNOLOGY=Unknown [ 535.343989] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 [ 535.343996] power_supply BAT0: prop VOLTAGE_NOW=12441000 [ 535.344003] power_supply BAT0: prop CURRENT_NOW=0 [ 535.344011] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 [ 535.344018] power_supply BAT0: prop ENERGY_FULL=51200000 [ 535.344026] power_supply BAT0: prop ENERGY_NOW=50450000 [ 535.344033] power_supply BAT0: prop MODEL_NAME=ASMB012 [ 535.344040] power_supply BAT0: prop MANUFACTURER=SMPN012 [ 535.344048] power_supply BAT0: prop SERIAL_NUMBER= [ 653.410310] power_supply ADP1: uevent [ 653.410316] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 [ 653.410330] power_supply ADP1: Static prop TYPE=Mains [ 653.410336] power_supply ADP1: 1 dynamic props [ 653.410342] power_supply ADP1: prop ONLINE=1 [ 653.662756] power_supply BAT0: uevent [ 653.662762] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 [ 653.662774] power_supply BAT0: Static prop TYPE=Battery [ 653.662781] power_supply BAT0: 12 dynamic props [ 653.662787] power_supply BAT0: prop STATUS=Full [ 653.662795] power_supply BAT0: prop PRESENT=1 [ 653.662803] power_supply BAT0: prop TECHNOLOGY=Unknown [ 653.662811] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 [ 653.662818] power_supply BAT0: prop VOLTAGE_NOW=12137000 [ 653.662826] power_supply BAT0: prop CURRENT_NOW=23982000 [ 653.662834] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 [ 653.662841] power_supply BAT0: prop ENERGY_FULL=51200000 [ 653.662848] power_supply BAT0: prop ENERGY_NOW=49800000 [ 653.662856] power_supply BAT0: prop MODEL_NAME=ASMB012 [ 653.662864] power_supply BAT0: prop MANUFACTURER=SMPN012 [ 653.662872] power_supply BAT0: prop SERIAL_NUMBER= [ 685.760485] power_supply BAT0: uevent [ 685.760491] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 [ 685.760502] power_supply BAT0: Static prop TYPE=Battery [ 685.760509] power_supply BAT0: 12 dynamic props [ 685.760515] power_supply BAT0: prop PRESENT=0 [ 688.392706] power_supply BAT0: uevent [ 688.392712] power_supply BAT0: No power supply yet [ 688.392806] power_supply BAT0: power_supply_changed [ 688.392873] power_supply BAT0: power_supply_changed_work [ 688.443152] power_supply BAT0: uevent [ 688.443155] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 [ 688.443161] power_supply BAT0: Static prop TYPE=Battery [ 688.443164] power_supply BAT0: 12 dynamic props [ 688.443167] power_supply BAT0: prop STATUS=Full [ 688.443171] power_supply BAT0: prop PRESENT=1 [ 688.443175] power_supply BAT0: prop TECHNOLOGY=Unknown [ 688.443179] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 [ 688.443182] power_supply BAT0: prop VOLTAGE_NOW=12411000 [ 688.443186] power_supply BAT0: prop CURRENT_NOW=0 [ 688.443189] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 [ 688.443192] power_supply BAT0: prop ENERGY_FULL=51210000 [ 688.443196] power_supply BAT0: prop ENERGY_NOW=49790000 [ 688.443199] power_supply BAT0: prop MODEL_NAME=ASMB012 [ 688.443203] power_supply BAT0: prop MANUFACTURER=SMPN012 [ 688.443206] power_supply BAT0: prop SERIAL_NUMBER= [ 688.449848] power_supply BAT0: uevent [ 688.449850] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 [ 688.449855] power_supply BAT0: Static prop TYPE=Battery [ 688.449858] power_supply BAT0: 12 dynamic props [ 688.449861] power_supply BAT0: prop STATUS=Full [ 688.449864] power_supply BAT0: prop PRESENT=1 [ 688.449868] power_supply BAT0: prop TECHNOLOGY=Unknown [ 688.449871] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 [ 688.449875] power_supply BAT0: prop VOLTAGE_NOW=12411000 [ 688.449878] power_supply BAT0: prop CURRENT_NOW=0 [ 688.449881] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 [ 688.449885] power_supply BAT0: prop ENERGY_FULL=51210000 [ 688.449913] power_supply BAT0: prop ENERGY_NOW=49790000 [ 688.449916] power_supply BAT0: prop MODEL_NAME=ASMB012 [ 688.449920] power_supply BAT0: prop MANUFACTURER=SMPN012 [ 688.449923] power_supply BAT0: prop SERIAL_NUMBER= [ 688.513500] power_supply BAT0: power_supply_update_bat_leds 4 [ 688.513520] power_supply BAT0: uevent [ 688.513522] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 [ 688.513528] power_supply BAT0: Static prop TYPE=Battery [ 688.513531] power_supply BAT0: 12 dynamic props [ 688.513534] power_supply BAT0: prop STATUS=Full [ 688.513537] power_supply BAT0: prop PRESENT=1 [ 688.513541] power_supply BAT0: prop TECHNOLOGY=Unknown [ 688.513545] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 [ 688.513549] power_supply BAT0: prop VOLTAGE_NOW=12411000 [ 688.513552] power_supply BAT0: prop CURRENT_NOW=0 [ 688.513556] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 [ 688.513559] power_supply BAT0: prop ENERGY_FULL=51210000 [ 688.513562] power_supply BAT0: prop ENERGY_NOW=49790000 [ 688.513566] power_supply BAT0: prop MODEL_NAME=ASMB012 [ 688.513569] power_supply BAT0: prop MANUFACTURER=SMPN012 [ 688.513572] power_supply BAT0: prop SERIAL_NUMBER= [ 719.746750] power_supply ADP1: uevent [ 719.746756] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 [ 719.746769] power_supply ADP1: Static prop TYPE=Mains [ 719.746775] power_supply ADP1: 1 dynamic props [ 719.746781] power_supply ADP1: prop ONLINE=0 [ 719.986378] power_supply BAT0: uevent [ 719.986383] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 [ 719.986395] power_supply BAT0: Static prop TYPE=Battery [ 719.986401] power_supply BAT0: 12 dynamic props [ 719.986407] power_supply BAT0: prop STATUS=Discharging [ 719.986414] power_supply BAT0: prop PRESENT=1 [ 719.986422] power_supply BAT0: prop TECHNOLOGY=Unknown [ 719.986431] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 [ 719.986438] power_supply BAT0: prop VOLTAGE_NOW=12431000 [ 719.986445] power_supply BAT0: prop CURRENT_NOW=0 [ 719.986452] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 [ 719.986460] power_supply BAT0: prop ENERGY_FULL=51210000 [ 719.986467] power_supply BAT0: prop ENERGY_NOW=49790000 [ 719.986474] power_supply BAT0: prop MODEL_NAME=ASMB012 [ 719.986480] power_supply BAT0: prop MANUFACTURER=SMPN012 [ 719.986487] power_supply BAT0: prop SERIAL_NUMBER= [ 724.564757] power_supply ADP1: uevent [ 724.564763] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 [ 724.564773] power_supply ADP1: Static prop TYPE=Mains [ 724.564779] power_supply ADP1: 1 dynamic props [ 724.564785] power_supply ADP1: prop ONLINE=1 [ 724.813287] power_supply BAT0: uevent [ 724.813290] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 [ 724.813295] power_supply BAT0: Static prop TYPE=Battery [ 724.813298] power_supply BAT0: 12 dynamic props [ 724.813301] power_supply BAT0: prop STATUS=Full [ 724.813305] power_supply BAT0: prop PRESENT=1 [ 724.813309] power_supply BAT0: prop TECHNOLOGY=Unknown [ 724.813313] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 [ 724.813316] power_supply BAT0: prop VOLTAGE_NOW=12182000 [ 724.813320] power_supply BAT0: prop CURRENT_NOW=25935000 [ 724.813323] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 [ 724.813327] power_supply BAT0: prop ENERGY_FULL=51210000 [ 724.813330] power_supply BAT0: prop ENERGY_NOW=49770000 [ 724.813333] power_supply BAT0: prop MODEL_NAME=ASMB012 [ 724.813337] power_supply BAT0: prop MANUFACTURER=SMPN012 [ 724.813340] power_supply BAT0: prop SERIAL_NUMBER= [ 725.501531] power_supply ADP1: uevent [ 725.501537] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 [ 725.501548] power_supply ADP1: Static prop TYPE=Mains [ 725.501555] power_supply ADP1: 1 dynamic props [ 725.501561] power_supply ADP1: prop ONLINE=0 [ 725.713359] power_supply BAT0: uevent [ 725.713365] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 [ 725.713374] power_supply BAT0: Static prop TYPE=Battery [ 725.713381] power_supply BAT0: 12 dynamic props [ 725.713387] power_supply BAT0: prop STATUS=Full [ 725.713394] power_supply BAT0: prop PRESENT=1 [ 725.713402] power_supply BAT0: prop TECHNOLOGY=Unknown [ 725.713412] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 [ 725.713419] power_supply BAT0: prop VOLTAGE_NOW=12182000 [ 725.713426] power_supply BAT0: prop CURRENT_NOW=25935000 [ 725.713434] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 [ 725.713441] power_supply BAT0: prop ENERGY_FULL=51210000 [ 725.713448] power_supply BAT0: prop ENERGY_NOW=49770000 [ 725.713456] power_supply BAT0: prop MODEL_NAME=ASMB012 [ 725.713463] power_supply BAT0: prop MANUFACTURER=SMPN012 [ 725.713470] power_supply BAT0: prop SERIAL_NUMBER= [ 726.910723] power_supply ADP1: uevent [ 726.910729] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 [ 726.910741] power_supply ADP1: Static prop TYPE=Mains [ 726.910748] power_supply ADP1: 1 dynamic props [ 726.910753] power_supply ADP1: prop ONLINE=1 [ 727.166168] power_supply BAT0: uevent [ 727.166173] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 [ 727.166183] power_supply BAT0: Static prop TYPE=Battery [ 727.166190] power_supply BAT0: 12 dynamic props [ 727.166196] power_supply BAT0: prop STATUS=Full [ 727.166204] power_supply BAT0: prop PRESENT=1 [ 727.166212] power_supply BAT0: prop TECHNOLOGY=Unknown [ 727.166220] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 [ 727.166227] power_supply BAT0: prop VOLTAGE_NOW=12184000 [ 727.166234] power_supply BAT0: prop CURRENT_NOW=24538000 [ 727.166242] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 [ 727.166249] power_supply BAT0: prop ENERGY_FULL=51210000 [ 727.166256] power_supply BAT0: prop ENERGY_NOW=49760000 [ 727.166264] power_supply BAT0: prop MODEL_NAME=ASMB012 [ 727.166271] power_supply BAT0: prop MANUFACTURER=SMPN012 [ 727.166278] power_supply BAT0: prop SERIAL_NUMBER= [ 728.483700] power_supply ADP1: uevent [ 728.483706] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 [ 728.483716] power_supply ADP1: Static prop TYPE=Mains [ 728.483722] power_supply ADP1: 1 dynamic props [ 728.483728] power_supply ADP1: prop ONLINE=0 [ 728.726615] power_supply BAT0: uevent [ 728.726621] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 [ 728.726632] power_supply BAT0: Static prop TYPE=Battery [ 728.726638] power_supply BAT0: 12 dynamic props [ 728.726645] power_supply BAT0: prop STATUS=Discharging [ 728.726653] power_supply BAT0: prop PRESENT=1 [ 728.726661] power_supply BAT0: prop TECHNOLOGY=Unknown [ 728.726670] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 [ 728.726676] power_supply BAT0: prop VOLTAGE_NOW=12412000 [ 728.726684] power_supply BAT0: prop CURRENT_NOW=173000 [ 728.726692] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 [ 728.726698] power_supply BAT0: prop ENERGY_FULL=51210000 [ 728.726706] power_supply BAT0: prop ENERGY_NOW=49760000 [ 728.726713] power_supply BAT0: prop MODEL_NAME=ASMB012 [ 728.726721] power_supply BAT0: prop MANUFACTURER=SMPN012 [ 728.726728] power_supply BAT0: prop SERIAL_NUMBER= [ 729.980935] power_supply ADP1: uevent [ 729.980941] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 [ 729.980950] power_supply ADP1: Static prop TYPE=Mains [ 729.980956] power_supply ADP1: 1 dynamic props [ 729.980962] power_supply ADP1: prop ONLINE=1 [ 730.244482] power_supply BAT0: uevent [ 730.244488] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 [ 730.244498] power_supply BAT0: Static prop TYPE=Battery [ 730.244505] power_supply BAT0: 12 dynamic props [ 730.244511] power_supply BAT0: prop STATUS=Full [ 730.244519] power_supply BAT0: prop PRESENT=1 [ 730.244527] power_supply BAT0: prop TECHNOLOGY=Unknown [ 730.244536] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 [ 730.244543] power_supply BAT0: prop VOLTAGE_NOW=12186000 [ 730.244550] power_supply BAT0: prop CURRENT_NOW=25249000 [ 730.244558] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 [ 730.244717] power_supply BAT0: prop ENERGY_FULL=51210000 [ 730.244725] power_supply BAT0: prop ENERGY_NOW=49750000 [ 730.244733] power_supply BAT0: prop MODEL_NAME=ASMB012 [ 730.244740] power_supply BAT0: prop MANUFACTURER=SMPN012 [ 730.244748] power_supply BAT0: prop SERIAL_NUMBER= [ 733.517400] power_supply ADP1: uevent [ 733.517406] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 [ 733.517418] power_supply ADP1: Static prop TYPE=Mains [ 733.517425] power_supply ADP1: 1 dynamic props [ 733.517431] power_supply ADP1: prop ONLINE=0 [ 733.753607] power_supply BAT0: uevent [ 733.753612] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 [ 733.753623] power_supply BAT0: Static prop TYPE=Battery [ 733.753630] power_supply BAT0: 12 dynamic props [ 733.753636] power_supply BAT0: prop STATUS=Discharging [ 733.753644] power_supply BAT0: prop PRESENT=1 [ 733.753652] power_supply BAT0: prop TECHNOLOGY=Unknown [ 733.753660] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 [ 733.753667] power_supply BAT0: prop VOLTAGE_NOW=12415000 [ 733.753674] power_supply BAT0: prop CURRENT_NOW=0 [ 733.753682] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 [ 733.753689] power_supply BAT0: prop ENERGY_FULL=51210000 [ 733.753696] power_supply BAT0: prop ENERGY_NOW=49750000 [ 733.753704] power_supply BAT0: prop MODEL_NAME=ASMB012 [ 733.753711] power_supply BAT0: prop MANUFACTURER=SMPN012 [ 733.753718] power_supply BAT0: prop SERIAL_NUMBER= [ 948.836251] power_supply ADP1: uevent [ 948.836258] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 [ 948.836270] power_supply ADP1: Static prop TYPE=Mains [ 948.836277] power_supply ADP1: 1 dynamic props [ 948.836283] power_supply ADP1: prop ONLINE=1 [ 949.043159] power_supply BAT0: uevent [ 949.043164] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 [ 949.043174] power_supply BAT0: Static prop TYPE=Battery [ 949.043180] power_supply BAT0: 12 dynamic props [ 949.043186] power_supply BAT0: prop STATUS=Discharging [ 949.043193] power_supply BAT0: prop PRESENT=1 [ 949.043201] power_supply BAT0: prop TECHNOLOGY=Unknown [ 949.043208] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 [ 949.043216] power_supply BAT0: prop VOLTAGE_NOW=12062000 [ 949.043223] power_supply BAT0: prop CURRENT_NOW=23991000 [ 949.043230] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 [ 949.043238] power_supply BAT0: prop ENERGY_FULL=51210000 [ 949.043244] power_supply BAT0: prop ENERGY_NOW=48560000 [ 949.043251] power_supply BAT0: prop MODEL_NAME=ASMB012 [ 949.043258] power_supply BAT0: prop MANUFACTURER=SMPN012 [ 949.043265] power_supply BAT0: prop SERIAL_NUMBER= [ 951.113855] power_supply BAT0: uevent [ 951.113861] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 [ 951.113872] power_supply BAT0: Static prop TYPE=Battery [ 951.113879] power_supply BAT0: 12 dynamic props [ 951.113885] power_supply BAT0: prop STATUS=Charging [ 951.113893] power_supply BAT0: prop PRESENT=1 [ 951.113901] power_supply BAT0: prop TECHNOLOGY=Unknown [ 951.113910] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 [ 951.113917] power_supply BAT0: prop VOLTAGE_NOW=12304000 [ 951.113924] power_supply BAT0: prop CURRENT_NOW=3137000 [ 951.113932] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 [ 951.113939] power_supply BAT0: prop ENERGY_FULL=51210000 [ 951.113946] power_supply BAT0: prop ENERGY_NOW=48550000 [ 951.113954] power_supply BAT0: prop MODEL_NAME=ASMB012 [ 951.113961] power_supply BAT0: prop MANUFACTURER=SMPN012 [ 951.113968] power_supply BAT0: prop SERIAL_NUMBER= [ 1457.028000] CE: hpet increasing min_delta_ns to 15000 nsec [ 2698.606700] ACPI: EC: GPE storm detected, transactions will use polling mode [ 3142.215340] power_supply BAT0: uevent [ 3142.215346] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 [ 3142.215356] power_supply BAT0: Static prop TYPE=Battery [ 3142.215363] power_supply BAT0: 12 dynamic props [ 3142.215369] power_supply BAT0: prop STATUS=Full [ 3142.215377] power_supply BAT0: prop PRESENT=1 [ 3142.215385] power_supply BAT0: prop TECHNOLOGY=Unknown [ 3142.215395] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 [ 3142.215403] power_supply BAT0: prop VOLTAGE_NOW=12603000 [ 3142.215412] power_supply BAT0: prop CURRENT_NOW=113000 [ 3142.215420] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 [ 3142.215428] power_supply BAT0: prop ENERGY_FULL=51210000 [ 3142.215436] power_supply BAT0: prop ENERGY_NOW=51200000 [ 3142.215444] power_supply BAT0: prop MODEL_NAME=ASMB012 [ 3142.215452] power_supply BAT0: prop MANUFACTURER=SMPN012 [ 3142.215460] power_supply BAT0: prop SERIAL_NUMBER= ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: ACPI: EC: GPE storm detected, transactions will use polling mode 2008-11-15 18:39 ` Justin Mattock @ 2008-11-15 19:19 ` Rafael J. Wysocki 2008-11-15 19:45 ` Justin P. Mattock ` (2 more replies) 0 siblings, 3 replies; 15+ messages in thread From: Rafael J. Wysocki @ 2008-11-15 19:19 UTC (permalink / raw) To: Justin Mattock Cc: Alan Jenkins, Alexey Starikovskiy, Andrew Morton, Linux Kernel Mailing List, linux-acpi, Len Brown On Saturday, 15 of November 2008, Justin Mattock wrote: > On Sat, Nov 15, 2008 at 4:06 AM, Alan Jenkins > <alan-jenkins@tuffmail.co.uk> wrote: > > Rafael J. Wysocki wrote: > >> > >> On Saturday, 15 of November 2008, Alan Jenkins wrote: > >> > >>> > >>> On Sat, Nov 15, 2008 at 9:23 AM, Alexey Starikovskiy <aystarik@gmail.com> > >>> wrote: > >>> > >>>> > >>>> Andrew Morton wrote: > >>>> > >>>>> > >>>>> (cc linux-acpi) > >>>>> > >>>>> On Fri, 14 Nov 2008 20:16:17 -0800 "Justin P. Mattock" > >>>>> <justinmattock@gmail.com> wrote: > >>>>> > >>>>> > >>>>>> > >>>>>> just pulled the latest git today and am now noticing > >>>>>> the lovely gpe storm being triggered.(dmesg below); > >>>>>> > >>>>> > >>>>> Are any other effects observeable? > >>>>> > >>>>> I assume that 2.6.27 didn't do this. > >>>>> > >>>>> > >>>> > >>>> It did. Justin even opened a bug -- #11724. > >>>> > >>> > >>> In case anyone else tries to follow that, it's actually #10724 :). > >>> > >> > >> Yes, the "transaction in interrupt context" patch fixed that IIRC and the > >> one > >> of the patches in the recet ACPI merge broke it again. > >> > >> Justin, can you see if reverting one or more of the following commits > >> helps: > >> > >> > >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=8517934ef6aaa28d6e055b98df65b31cedbd1372 > >> > >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=06cf7d3c7af902939cd1754abcafb2464060cba8 > >> > >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=0b7084ac67fb84f0cf2f8bc02d7e0dea8521dd2d > >> > >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=a2f93aeadf97e870ff385030633a73e21146815d > >> > >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=dd15f8c42af09031e27da5b4d697ce925511f2e1 > >> > >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=f8248434e6a11d7cd314281be3b39bbcf82fc243 > >> > >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=1cfe62c8010ac56e1bd3827e30386a87cc2f3594 > >> > >> (please revert in this order)? > >> > > > > Be aware there's a real possibility this was only a cosmetic fix (and > > regression). > > > > I think the original GPE storm avoidance printed that message by default. > > Then the "transaction in interrupt context" made the message into a > > pr_debug(), - i.e. disabled it by default. And then my "make messages more > > useful when GPE storm is detected" re-enabled it. > > > > IIRC, this flip-flopping is contained within 2.6.28-rc. I.e. I don't think > > it will show up as a (cosmetic) regression when jumping straight from 2.6.27 > > to 2.6.28. Though I suspect it will shows up between certain versions of > > -stable. > > > > Regards > > Alan > > > > O.K. I think I was wrong about stating > this was not caused by the discharging and charging of the battery. > to retrace my steps > yesterday I pulled, then recompiled, then > let the system idle for a few, then once I moved the computer to the > other room,(unplugged/plugged the A/C adapter) > the light turned orange on the A/C adapter then once > the battery became fully charged(green light on A/C adapter) > the gpe storm was triggered. Once I saw the gpe storm, I rebooted > (under the impression the battery was in a good state), > instantly the gpe storm was triggered. leading me > to beleive this was something else. > So after seeing that and sending a post I used the > acpi_osi=Darwin option sat had a beer and worried about it tomorrow. > Now when I woke up, and saw the commits from rafael(thanks for the help) > I decided to make sure this was reproducible, So removing the acpi_osi option, > then let the system idled. To my amazement the > gpe storm was not triggered at all. > (even unplugging and plugging the A/C multiple times had no effect) > After a while thinking what the hell is going on here, I decided to discharge > the battery to around 97% or 5 min. and then charge to see if this > triggers the gpe storm. Well sure enough it did.(attached is dmesg); > > So for now should I go and individually revert the commits; charge, > and discharge > to locate the culprit, or is this something completely different? Well, you have only one "ACPI: EC: GPE storm detected, transactions will use polling mode" message in the log, so the EC code seems to work as expected and you _really_ have an interrupt storm that is worked around. Not sure what's causing it to happen, though. Thanks, Rafael ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: ACPI: EC: GPE storm detected, transactions will use polling mode 2008-11-15 19:19 ` Rafael J. Wysocki @ 2008-11-15 19:45 ` Justin P. Mattock 2008-11-15 21:48 ` Justin P. Mattock 2008-11-16 6:41 ` Justin P. Mattock 2 siblings, 0 replies; 15+ messages in thread From: Justin P. Mattock @ 2008-11-15 19:45 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Alan Jenkins, Alexey Starikovskiy, Andrew Morton, Linux Kernel Mailing List, linux-acpi, Len Brown On Sat, 2008-11-15 at 20:19 +0100, Rafael J. Wysocki wrote: > On Saturday, 15 of November 2008, Justin Mattock wrote: > > On Sat, Nov 15, 2008 at 4:06 AM, Alan Jenkins > > <alan-jenkins@tuffmail.co.uk> wrote: > > > Rafael J. Wysocki wrote: > > >> > > >> On Saturday, 15 of November 2008, Alan Jenkins wrote: > > >> > > >>> > > >>> On Sat, Nov 15, 2008 at 9:23 AM, Alexey Starikovskiy <aystarik@gmail.com> > > >>> wrote: > > >>> > > >>>> > > >>>> Andrew Morton wrote: > > >>>> > > >>>>> > > >>>>> (cc linux-acpi) > > >>>>> > > >>>>> On Fri, 14 Nov 2008 20:16:17 -0800 "Justin P. Mattock" > > >>>>> <justinmattock@gmail.com> wrote: > > >>>>> > > >>>>> > > >>>>>> > > >>>>>> just pulled the latest git today and am now noticing > > >>>>>> the lovely gpe storm being triggered.(dmesg below); > > >>>>>> > > >>>>> > > >>>>> Are any other effects observeable? > > >>>>> > > >>>>> I assume that 2.6.27 didn't do this. > > >>>>> > > >>>>> > > >>>> > > >>>> It did. Justin even opened a bug -- #11724. > > >>>> > > >>> > > >>> In case anyone else tries to follow that, it's actually #10724 :). > > >>> > > >> > > >> Yes, the "transaction in interrupt context" patch fixed that IIRC and the > > >> one > > >> of the patches in the recet ACPI merge broke it again. > > >> > > >> Justin, can you see if reverting one or more of the following commits > > >> helps: > > >> > > >> > > >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=8517934ef6aaa28d6e055b98df65b31cedbd1372 > > >> > > >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=06cf7d3c7af902939cd1754abcafb2464060cba8 > > >> > > >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=0b7084ac67fb84f0cf2f8bc02d7e0dea8521dd2d > > >> > > >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=a2f93aeadf97e870ff385030633a73e21146815d > > >> > > >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=dd15f8c42af09031e27da5b4d697ce925511f2e1 > > >> > > >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=f8248434e6a11d7cd314281be3b39bbcf82fc243 > > >> > > >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=1cfe62c8010ac56e1bd3827e30386a87cc2f3594 > > >> > > >> (please revert in this order)? > > >> > > > > > > Be aware there's a real possibility this was only a cosmetic fix (and > > > regression). > > > > > > I think the original GPE storm avoidance printed that message by default. > > > Then the "transaction in interrupt context" made the message into a > > > pr_debug(), - i.e. disabled it by default. And then my "make messages more > > > useful when GPE storm is detected" re-enabled it. > > > > > > IIRC, this flip-flopping is contained within 2.6.28-rc. I.e. I don't think > > > it will show up as a (cosmetic) regression when jumping straight from 2.6.27 > > > to 2.6.28. Though I suspect it will shows up between certain versions of > > > -stable. > > > > > > Regards > > > Alan > > > > > > > O.K. I think I was wrong about stating > > this was not caused by the discharging and charging of the battery. > > to retrace my steps > > yesterday I pulled, then recompiled, then > > let the system idle for a few, then once I moved the computer to the > > other room,(unplugged/plugged the A/C adapter) > > the light turned orange on the A/C adapter then once > > the battery became fully charged(green light on A/C adapter) > > the gpe storm was triggered. Once I saw the gpe storm, I rebooted > > (under the impression the battery was in a good state), > > instantly the gpe storm was triggered. leading me > > to beleive this was something else. > > So after seeing that and sending a post I used the > > acpi_osi=Darwin option sat had a beer and worried about it tomorrow. > > Now when I woke up, and saw the commits from rafael(thanks for the help) > > I decided to make sure this was reproducible, So removing the acpi_osi option, > > then let the system idled. To my amazement the > > gpe storm was not triggered at all. > > (even unplugging and plugging the A/C multiple times had no effect) > > After a while thinking what the hell is going on here, I decided to discharge > > the battery to around 97% or 5 min. and then charge to see if this > > triggers the gpe storm. Well sure enough it did.(attached is dmesg); > > > > So for now should I go and individually revert the commits; charge, > > and discharge > > to locate the culprit, or is this something completely different? > > Well, you have only one > "ACPI: EC: GPE storm detected, transactions will use polling mode" message in > the log, so the EC code seems to work as expected and you _really_ have an > interrupt storm that is worked around. > > Not sure what's causing it to happen, though. > > Thanks, > Rafael yep, in the past the gpe storm was triggered instantly without messing around with the battery. Now that seems to be fixed. This on the other hand, has something to do with the state of the battery. i.g. going from charging to charged.(whatever happens with those events, or props). The positive side is when this occurs, the system works as if nothing is wrong. the negative side is this could of been happening as far back as last month or even further back in history.(never thought to test this when applying the patches a while back); In any case I'm going to let the system idle and see if the gpe storm is triggered. if so I'll let you know. -- Justin P. Mattock <justinmattock@gmail.com> ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: ACPI: EC: GPE storm detected, transactions will use polling mode 2008-11-15 19:19 ` Rafael J. Wysocki 2008-11-15 19:45 ` Justin P. Mattock @ 2008-11-15 21:48 ` Justin P. Mattock 2008-11-16 6:41 ` Justin P. Mattock 2 siblings, 0 replies; 15+ messages in thread From: Justin P. Mattock @ 2008-11-15 21:48 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Alan Jenkins, Alexey Starikovskiy, Andrew Morton, Linux Kernel Mailing List, linux-acpi, Len Brown [-- Attachment #1: Type: text/plain, Size: 5133 bytes --] On Sat, 2008-11-15 at 20:19 +0100, Rafael J. Wysocki wrote: > On Saturday, 15 of November 2008, Justin Mattock wrote: > > On Sat, Nov 15, 2008 at 4:06 AM, Alan Jenkins > > <alan-jenkins@tuffmail.co.uk> wrote: > > > Rafael J. Wysocki wrote: > > >> > > >> On Saturday, 15 of November 2008, Alan Jenkins wrote: > > >> > > >>> > > >>> On Sat, Nov 15, 2008 at 9:23 AM, Alexey Starikovskiy <aystarik@gmail.com> > > >>> wrote: > > >>> > > >>>> > > >>>> Andrew Morton wrote: > > >>>> > > >>>>> > > >>>>> (cc linux-acpi) > > >>>>> > > >>>>> On Fri, 14 Nov 2008 20:16:17 -0800 "Justin P. Mattock" > > >>>>> <justinmattock@gmail.com> wrote: > > >>>>> > > >>>>> > > >>>>>> > > >>>>>> just pulled the latest git today and am now noticing > > >>>>>> the lovely gpe storm being triggered.(dmesg below); > > >>>>>> > > >>>>> > > >>>>> Are any other effects observeable? > > >>>>> > > >>>>> I assume that 2.6.27 didn't do this. > > >>>>> > > >>>>> > > >>>> > > >>>> It did. Justin even opened a bug -- #11724. > > >>>> > > >>> > > >>> In case anyone else tries to follow that, it's actually #10724 :). > > >>> > > >> > > >> Yes, the "transaction in interrupt context" patch fixed that IIRC and the > > >> one > > >> of the patches in the recet ACPI merge broke it again. > > >> > > >> Justin, can you see if reverting one or more of the following commits > > >> helps: > > >> > > >> > > >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=8517934ef6aaa28d6e055b98df65b31cedbd1372 > > >> > > >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=06cf7d3c7af902939cd1754abcafb2464060cba8 > > >> > > >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=0b7084ac67fb84f0cf2f8bc02d7e0dea8521dd2d > > >> > > >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=a2f93aeadf97e870ff385030633a73e21146815d > > >> > > >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=dd15f8c42af09031e27da5b4d697ce925511f2e1 > > >> > > >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=f8248434e6a11d7cd314281be3b39bbcf82fc243 > > >> > > >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=1cfe62c8010ac56e1bd3827e30386a87cc2f3594 > > >> > > >> (please revert in this order)? > > >> > > > > > > Be aware there's a real possibility this was only a cosmetic fix (and > > > regression). > > > > > > I think the original GPE storm avoidance printed that message by default. > > > Then the "transaction in interrupt context" made the message into a > > > pr_debug(), - i.e. disabled it by default. And then my "make messages more > > > useful when GPE storm is detected" re-enabled it. > > > > > > IIRC, this flip-flopping is contained within 2.6.28-rc. I.e. I don't think > > > it will show up as a (cosmetic) regression when jumping straight from 2.6.27 > > > to 2.6.28. Though I suspect it will shows up between certain versions of > > > -stable. > > > > > > Regards > > > Alan > > > > > > > O.K. I think I was wrong about stating > > this was not caused by the discharging and charging of the battery. > > to retrace my steps > > yesterday I pulled, then recompiled, then > > let the system idle for a few, then once I moved the computer to the > > other room,(unplugged/plugged the A/C adapter) > > the light turned orange on the A/C adapter then once > > the battery became fully charged(green light on A/C adapter) > > the gpe storm was triggered. Once I saw the gpe storm, I rebooted > > (under the impression the battery was in a good state), > > instantly the gpe storm was triggered. leading me > > to beleive this was something else. > > So after seeing that and sending a post I used the > > acpi_osi=Darwin option sat had a beer and worried about it tomorrow. > > Now when I woke up, and saw the commits from rafael(thanks for the help) > > I decided to make sure this was reproducible, So removing the acpi_osi option, > > then let the system idled. To my amazement the > > gpe storm was not triggered at all. > > (even unplugging and plugging the A/C multiple times had no effect) > > After a while thinking what the hell is going on here, I decided to discharge > > the battery to around 97% or 5 min. and then charge to see if this > > triggers the gpe storm. Well sure enough it did.(attached is dmesg); > > > > So for now should I go and individually revert the commits; charge, > > and discharge > > to locate the culprit, or is this something completely different? > > Well, you have only one > "ACPI: EC: GPE storm detected, transactions will use polling mode" message in > the log, so the EC code seems to work as expected and you _really_ have an > interrupt storm that is worked around. > > Not sure what's causing it to happen, though. > > Thanks, > Rafael Hmm... Well it looks like the gpe storm is triggered without messing with the battery: after 2 hrs I get ACPI: EC: GPE storm detected, transactions will use polling mode looks like I'll try out those commits to see what happens. attached is dmesg. -- Justin P. Mattock <justinmattock@gmail.com> [-- Attachment #2: dmesg --] [-- Type: text/plain, Size: 55874 bytes --] [ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00 [ 0.000000] Linux version 2.6.28-rc4-00322-g58e20d8 (root@LiNuX) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Sat Nov 15 09:13:21 PST 2008 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f0ea000 (usable) [ 0.000000] BIOS-e820: 000000003f0ea000 - 000000003f2eb000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f2eb000 - 000000003febe000 (ACPI data) [ 0.000000] BIOS-e820: 000000003febe000 - 000000003feef000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003feef000 - 000000003ff00000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x3f0ea max_arch_pfn = 0x100000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] Scanning 2 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 0000000000007000 (usable) [ 0.000000] modified: 0000000000007000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 0000000000092c00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003f0ea000 (usable) [ 0.000000] modified: 000000003f0ea000 - 000000003f2eb000 (ACPI NVS) [ 0.000000] modified: 000000003f2eb000 - 000000003febe000 (ACPI data) [ 0.000000] modified: 000000003febe000 - 000000003feef000 (ACPI NVS) [ 0.000000] modified: 000000003feef000 - 000000003ff00000 (ACPI data) [ 0.000000] modified: 000000003ff00000 - 0000000040000000 (reserved) [ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-16000 [ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE ) [ 0.000000] ACPI: XSDT 3FEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013) [ 0.000000] ACPI: FACP 3FEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F) [ 0.000000] ACPI: DSDT 3FEF0000, 48D1 (r1 APPLE MacBookP 20002 INTL 20050309) [ 0.000000] ACPI: FACS 3FEC0000, 0040 [ 0.000000] ACPI: HPET 3FEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: APIC 3FEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: MCFG 3FEF8000, 003C (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: ASF! 3FEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: SBST 3FEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: ECDT 3FEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: SSDT 3FEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309) [ 0.000000] ACPI: SSDT 3FEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309) [ 0.000000] ACPI: SSDT 3FEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309) [ 0.000000] ACPI: DMI detected: Apple [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 120MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 00000000 - 377fe000 [ 0.000000] bootmap 00012000 - 00018f00 [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 000062bbe4] TEXT DATA BSS ==> [0000100000 - 000062bbe4] [ 0.000000] #4 [000062c000 - 000062f000] INIT_PG_TABLE ==> [000062c000 - 000062f000] [ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003f0ea [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x00000007 [ 0.000000] 0: 0x00000010 -> 0x00000092 [ 0.000000] 0: 0x00000100 -> 0x0003f0ea [ 0.000000] On node 0 totalpages: 258159 [ 0.000000] free_area_init_node: node 0, pgdat c051f980, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3941 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 242 pages used for memmap [ 0.000000] HighMem zone: 30714 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 0000000000007000 - 0000000000010000 [ 0.000000] PM: Registered nosave memory: 0000000000092000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) [ 0.000000] PERCPU: Allocating 40960 bytes of per cpu data [ 0.000000] NR_CPUS: 2, nr_cpu_ids: 2, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256141 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.28-rc4-00322-g58e20d8 root=/dev/sda1 ro vga=790 debug pnpacpi=off pci=routeirq audit=1 selinux=1 enforcing=1 [ 0.000000] audit: enabled (after initialization) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] TSC: Unable to calibrate against PIT [ 0.000000] TSC: using PMTIMER reference calibration [ 0.000000] Detected 2161.242 MHz processor. [ 0.010000] Console: colour dummy device 80x25 [ 0.010000] console [tty0] enabled [ 0.010000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.010000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.010000] Scanning for low memory corruption every 60 seconds [ 0.010000] Memory: 1017932k/1033128k available (2803k kernel code, 14344k reserved, 1506k data, 404k init, 123824k highmem) [ 0.010000] virtual kernel memory layout: [ 0.010000] fixmap : 0xfff82000 - 0xfffff000 ( 500 kB) [ 0.010000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.010000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.010000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.010000] .init : 0xc053c000 - 0xc05a1000 ( 404 kB) [ 0.010000] .data : 0xc03bce25 - 0xc05357c4 (1506 kB) [ 0.010000] .text : 0xc0100000 - 0xc03bce25 (2803 kB) [ 0.010000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.010000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.010000] hpet clockevent registered [ 0.010000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4322.48 BogoMIPS (lpj=21612420) [ 0.010000] Security Framework initialized [ 0.010000] SELinux: Initializing. [ 0.010000] SELinux: Starting in enforcing mode [ 0.010000] Failure registering Root Plug module with the kernel [ 0.010000] Mount-cache hash table entries: 512 [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 4096K [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 0 [ 0.010000] Intel machine check architecture supported. [ 0.010000] Intel machine check reporting enabled on CPU#0. [ 0.010000] using mwait in idle threads. [ 0.010000] Checking 'hlt' instruction... OK. [ 0.041238] ACPI: Core revision 20080926 [ 0.059736] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.159757] CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06 [ 0.160000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] Calibrating delay using timer specific routine.. 4322.51 BogoMIPS (lpj=21612585) [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 4096K [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 1 [ 0.010000] Intel machine check architecture supported. [ 0.010000] Intel machine check reporting enabled on CPU#1. [ 0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.311696] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06 [ 0.311729] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.320021] Brought up 2 CPUs [ 0.320027] Total of 2 processors activated (8645.00 BogoMIPS). [ 0.320093] CPU0 attaching sched-domain: [ 0.320098] domain 0: span 0-1 level MC [ 0.320102] groups: 0 1 [ 0.320110] CPU1 attaching sched-domain: [ 0.320113] domain 0: span 0-1 level MC [ 0.320117] groups: 1 0 [ 0.320200] net_namespace: 540 bytes [ 0.320200] Booting paravirtualized kernel on bare hardware [ 0.320316] NET: Registered protocol family 16 [ 0.320316] EISA bus registered [ 0.320316] ACPI: bus type pci registered [ 0.320316] PCI: Using configuration type 1 for base access [ 0.331036] ACPI: EC: EC description table is found, configuring boot EC [ 0.331289] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.342809] ACPI: BIOS _OSI(Linux) query ignored via DMI [ 0.343896] ACPI: Interpreter enabled [ 0.343901] ACPI: (supports S0 S3 S4 S5) [ 0.343975] ACPI: Using IOAPIC for interrupt routing [ 0.370295] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.370295] ACPI: EC: driver started in interrupt mode [ 0.370410] ACPI: No dock devices found. [ 0.370437] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.370496] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.370496] pci 0000:00:01.0: PME# disabled [ 0.370496] pci 0000:00:07.0: reg 10 32bit mmio: [0x50404000-0x50404fff] [ 0.370496] pci 0000:00:1b.0: reg 10 64bit mmio: [0x50400000-0x50403fff] [ 0.370496] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.370496] pci 0000:00:1b.0: PME# disabled [ 0.370496] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.370496] pci 0000:00:1c.0: PME# disabled [ 0.370496] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.370496] pci 0000:00:1c.1: PME# disabled [ 0.370507] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.370514] pci 0000:00:1c.2: PME# disabled [ 0.370584] pci 0000:00:1d.0: reg 20 io port: [0x4080-0x409f] [ 0.370652] pci 0000:00:1d.1: reg 20 io port: [0x4060-0x407f] [ 0.370720] pci 0000:00:1d.2: reg 20 io port: [0x4040-0x405f] [ 0.370787] pci 0000:00:1d.3: reg 20 io port: [0x4020-0x403f] [ 0.370858] pci 0000:00:1d.7: reg 10 32bit mmio: [0x50405400-0x504057ff] [ 0.370907] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.370915] pci 0000:00:1d.7: PME# disabled [ 0.371081] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.371088] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO [ 0.371147] pci 0000:00:1f.1: reg 10 io port: [0x40d8-0x40df] [ 0.371157] pci 0000:00:1f.1: reg 14 io port: [0x40ec-0x40ef] [ 0.371167] pci 0000:00:1f.1: reg 18 io port: [0x40d0-0x40d7] [ 0.371176] pci 0000:00:1f.1: reg 1c io port: [0x40e8-0x40eb] [ 0.371186] pci 0000:00:1f.1: reg 20 io port: [0x40b0-0x40bf] [ 0.371244] pci 0000:00:1f.2: reg 10 io port: [0x40c8-0x40cf] [ 0.371254] pci 0000:00:1f.2: reg 14 io port: [0x40e4-0x40e7] [ 0.371263] pci 0000:00:1f.2: reg 18 io port: [0x40c0-0x40c7] [ 0.371273] pci 0000:00:1f.2: reg 1c io port: [0x40e0-0x40e3] [ 0.371282] pci 0000:00:1f.2: reg 20 io port: [0x40a0-0x40af] [ 0.371291] pci 0000:00:1f.2: reg 24 32bit mmio: [0x50405000-0x504053ff] [ 0.371312] pci 0000:00:1f.2: PME# supported from D3hot [ 0.371318] pci 0000:00:1f.2: PME# disabled [ 0.371386] pci 0000:00:1f.3: reg 20 io port: [0xefa0-0xefbf] [ 0.371453] pci 0000:01:00.0: reg 10 32bit mmio: [0x40000000-0x47ffffff] [ 0.371464] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff] [ 0.371474] pci 0000:01:00.0: reg 18 32bit mmio: [0x50300000-0x5030ffff] [ 0.371495] pci 0000:01:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff] [ 0.371507] pci 0000:01:00.0: supports D1 D2 [ 0.371567] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff] [ 0.371572] pci 0000:00:01.0: bridge 32bit mmio: [0x50300000-0x503fffff] [ 0.371579] pci 0000:00:01.0: bridge 64bit mmio pref: [0x40000000-0x47ffffff] [ 0.371663] pci 0000:02:00.0: reg 10 64bit mmio: [0x50200000-0x50203fff] [ 0.371676] pci 0000:02:00.0: reg 18 io port: [0x2000-0x20ff] [ 0.371713] pci 0000:02:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff] [ 0.371730] pci 0000:02:00.0: supports D1 D2 [ 0.371733] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.371741] pci 0000:02:00.0: PME# disabled [ 0.371804] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] [ 0.371811] pci 0000:00:1c.0: bridge 32bit mmio: [0x50200000-0x502fffff] [ 0.371903] pci 0000:03:00.0: reg 10 64bit mmio: [0x50100000-0x5010ffff] [ 0.371963] pci 0000:03:00.0: supports D1 [ 0.371966] pci 0000:03:00.0: PME# supported from D0 D1 D3hot [ 0.371974] pci 0000:03:00.0: PME# disabled [ 0.372049] pci 0000:00:1c.1: bridge 32bit mmio: [0x50100000-0x501fffff] [ 0.372118] pci 0000:00:1c.2: bridge io port: [0x1000-0x1fff] [ 0.372125] pci 0000:00:1c.2: bridge 32bit mmio: [0x4c100000-0x500fffff] [ 0.372135] pci 0000:00:1c.2: bridge 64bit mmio pref: [0x48000000-0x4bffffff] [ 0.372197] pci 0000:0c:03.0: reg 10 32bit mmio: [0x4c004000-0x4c0047ff] [ 0.372208] pci 0000:0c:03.0: reg 14 32bit mmio: [0x4c000000-0x4c003fff] [ 0.372260] pci 0000:0c:03.0: supports D1 D2 [ 0.372263] pci 0000:0c:03.0: PME# supported from D0 D1 D2 D3hot [ 0.372270] pci 0000:0c:03.0: PME# disabled [ 0.372333] pci 0000:00:1e.0: transparent bridge [ 0.372342] pci 0000:00:1e.0: bridge 32bit mmio: [0x4c000000-0x4c0fffff] [ 0.372380] bus 00 -> node 0 [ 0.372393] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.381400] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.381999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.382586] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.383179] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.383790] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.401166] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.401166] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.401166] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.401166] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.401357] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.401645] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.401937] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.402218] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) [ 0.410280] SCSI subsystem initialized [ 0.410280] libata version 3.00 loaded. [ 0.410280] usbcore: registered new interface driver usbfs [ 0.410280] usbcore: registered new interface driver hub [ 0.410280] usbcore: registered new device driver usb [ 0.410280] PCI: Using ACPI for IRQ routing [ 0.410280] PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified [ 0.410280] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.410280] pci 0000:00:07.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.410280] pci 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 0.410280] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.410280] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.410280] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.410280] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.410280] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.410280] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.410280] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.410280] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.410280] pci 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.410280] pci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.410280] pci 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.410280] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.410280] pci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.410280] pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.410280] pci 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.440078] cfg80211: Using static regulatory domain info [ 0.440078] cfg80211: Regulatory domain: US [ 0.440078] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 0.440078] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 0.440078] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.440078] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.440078] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.440078] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 0.440082] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 0.440086] cfg80211: Calling CRDA for country: US [ 0.440112] NetLabel: Initializing [ 0.440112] NetLabel: domain hash size = 128 [ 0.440112] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.440134] NetLabel: unlabeled traffic allowed by default [ 0.440148] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.440154] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.470028] pnp: PnP ACPI: disabled [ 0.501755] Switched to high resolution mode on CPU 1 [ 0.505971] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.505979] pci 0000:00:01.0: IO window: 0x3000-0x3fff [ 0.505985] pci 0000:00:01.0: MEM window: 0x50300000-0x503fffff [ 0.505990] pci 0000:00:01.0: PREFETCH window: 0x00000040000000-0x00000047ffffff [ 0.505999] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.506004] pci 0000:00:1c.0: IO window: 0x2000-0x2fff [ 0.506012] pci 0000:00:1c.0: MEM window: 0x50200000-0x502fffff [ 0.506019] pci 0000:00:1c.0: PREFETCH window: 0x00000050500000-0x000000505fffff [ 0.506030] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.506033] pci 0000:00:1c.1: IO window: disabled [ 0.506041] pci 0000:00:1c.1: MEM window: 0x50100000-0x501fffff [ 0.506047] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.506056] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 [ 0.506062] pci 0000:00:1c.2: IO window: 0x1000-0x1fff [ 0.506070] pci 0000:00:1c.2: MEM window: 0x4c100000-0x500fffff [ 0.506076] pci 0000:00:1c.2: PREFETCH window: 0x00000048000000-0x0000004bffffff [ 0.506087] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0c [ 0.506091] pci 0000:00:1e.0: IO window: disabled [ 0.506098] pci 0000:00:1e.0: MEM window: 0x4c000000-0x4c0fffff [ 0.506105] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.506118] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.506125] pci 0000:00:01.0: setting latency timer to 64 [ 0.506134] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.506141] pci 0000:00:1c.0: setting latency timer to 64 [ 0.506152] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.506158] pci 0000:00:1c.1: setting latency timer to 64 [ 0.506169] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.506175] pci 0000:00:1c.2: setting latency timer to 64 [ 0.506337] pci 0000:00:1e.0: power state changed by ACPI to D0 [ 0.506346] pci 0000:00:1e.0: setting latency timer to 64 [ 0.506352] bus: 00 index 0 io port: [0x00-0xffff] [ 0.506356] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 0.506359] bus: 01 index 0 io port: [0x3000-0x3fff] [ 0.506363] bus: 01 index 1 mmio: [0x50300000-0x503fffff] [ 0.506367] bus: 01 index 2 mmio: [0x40000000-0x47ffffff] [ 0.506370] bus: 01 index 3 mmio: [0x0-0x0] [ 0.506374] bus: 02 index 0 io port: [0x2000-0x2fff] [ 0.506377] bus: 02 index 1 mmio: [0x50200000-0x502fffff] [ 0.506381] bus: 02 index 2 mmio: [0x50500000-0x505fffff] [ 0.506384] bus: 02 index 3 mmio: [0x0-0x0] [ 0.506388] bus: 03 index 0 mmio: [0x0-0x0] [ 0.506391] bus: 03 index 1 mmio: [0x50100000-0x501fffff] [ 0.506394] bus: 03 index 2 mmio: [0x0-0x0] [ 0.506398] bus: 03 index 3 mmio: [0x0-0x0] [ 0.506401] bus: 04 index 0 io port: [0x1000-0x1fff] [ 0.506405] bus: 04 index 1 mmio: [0x4c100000-0x500fffff] [ 0.506408] bus: 04 index 2 mmio: [0x48000000-0x4bffffff] [ 0.506412] bus: 04 index 3 mmio: [0x0-0x0] [ 0.506415] bus: 0c index 0 mmio: [0x0-0x0] [ 0.506418] bus: 0c index 1 mmio: [0x4c000000-0x4c0fffff] [ 0.506422] bus: 0c index 2 mmio: [0x0-0x0] [ 0.506425] bus: 0c index 3 io port: [0x00-0xffff] [ 0.506429] bus: 0c index 4 mmio: [0x000000-0xffffffff] [ 0.506442] NET: Registered protocol family 2 [ 0.510002] Switched to high resolution mode on CPU 0 [ 0.540077] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.540401] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.540841] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) [ 0.541393] TCP: Hash tables configured (established 131072 bind 65536) [ 0.541397] TCP reno registered [ 0.550152] NET: Registered protocol family 1 [ 0.551156] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.553237] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 0.554645] Initializing RT-Tester: OK [ 0.554758] audit: initializing netlink socket (enabled) [ 0.554823] type=2000 audit(1226777320.551:1): initialized [ 0.559741] highmem bounce pool size: 64 pages [ 0.559749] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.575809] fuse init (API version 7.10) [ 0.576404] msgmni has been set to 1747 [ 0.576647] SELinux: Registering netfilter hooks [ 0.577571] alg: No test for stdrng (krng) [ 0.577592] io scheduler noop registered [ 0.577939] io scheduler cfq registered (default) [ 0.578097] pci 0000:01:00.0: Boot video device [ 0.598529] vesafb: framebuffer at 0x40000000, mapped to 0xf8100000, using 3072k, total 16384k [ 0.598536] vesafb: mode is 1024x768x16, linelength=2048, pages=9 [ 0.598539] vesafb: protected mode interface info at c000:ad0c [ 0.598543] vesafb: pmi: set display start = c00cad94, set palette = c00cae50 [ 0.598547] vesafb: scrolling: redraw [ 0.598551] vesafb: Truecolor: size=0:5:5:5, shift=0:10:5:0 [ 0.622853] Console: switching to colour frame buffer device 128x48 [ 0.645029] fb0: VESA VGA frame buffer device [ 0.658523] loop: module loaded [ 0.658675] Linux video capture interface: v2.00 [ 0.659130] input: Macintosh mouse button emulation as /class/input/input0 [ 0.659735] Driver 'sd' needs updating - please use bus_type methods [ 0.660132] Driver 'sr' needs updating - please use bus_type methods [ 0.660782] ata_piix 0000:00:1f.1: version 2.12 [ 0.661085] ata_piix 0000:00:1f.1: power state changed by ACPI to D0 [ 0.661383] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.661753] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.662113] scsi0 : ata_piix [ 0.662751] scsi1 : ata_piix [ 0.664892] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14 [ 0.665212] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15 [ 0.840579] ata1.00: ATAPI: MATSHITADVD-R UJ-857D, KCV9, max UDMA/66 [ 0.880536] ata1.00: configured for UDMA/66 [ 1.053363] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-857D KCV9 PQ: 0 ANSI: 5 [ 1.058024] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 1.066729] Uniform CD-ROM driver Revision: 3.20 [ 1.075578] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.084271] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.092553] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.100864] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ] [ 1.260015] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.268315] scsi2 : ata_piix [ 1.276575] scsi3 : ata_piix [ 1.288158] ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19 [ 1.296314] ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19 [ 1.490510] ata3.01: ATA-8: FUJITSU MHW2120BH, 00810013, max UDMA/100 [ 1.498553] ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.540517] ata3.01: configured for UDMA/100 [ 1.711230] scsi 2:0:1:0: Direct-Access ATA FUJITSU MHW2120B 0081 PQ: 0 ANSI: 5 [ 1.719953] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 1.728522] sd 2:0:1:0: [sda] Write Protect is off [ 1.736985] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 1.745376] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.753961] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB) [ 1.762466] sd 2:0:1:0: [sda] Write Protect is off [ 1.770844] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 1.779154] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.787681] sda: sda1 sda2 [ 1.796814] sd 2:0:1:0: [sda] Attached SCSI disk [ 1.805443] sd 2:0:1:0: Attached scsi generic sg1 type 0 [ 1.813888] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.822386] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.831011] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.839462] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.847929] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.860403] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.868766] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.877296] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x50405400 [ 1.900009] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.908649] usb usb1: configuration #1 chosen from 1 choice [ 1.917183] hub 1-0:1.0: USB hub found [ 1.925685] hub 1-0:1.0: 8 ports detected [ 1.934770] usbcore: registered new interface driver usblcd [ 1.943430] usbcore: registered new interface driver usbled [ 1.952155] PNP: No PS/2 controller found. Probing ports directly. [ 1.961444] i8042.c: No controller found. [ 1.980234] mice: PS/2 mouse device common for all mice [ 1.989173] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 1.997629] EDAC MC: Ver: 2.1.0 Nov 15 2008 [ 2.006480] cpuidle: using governor ladder [ 2.014950] cpuidle: using governor menu [ 2.025303] usbcore: registered new interface driver hiddev [ 2.033763] usbcore: registered new interface driver usbhid [ 2.042028] usbhid: v2.6:USB HID core driver [ 2.050349] Advanced Linux Sound Architecture Driver Version 1.0.18rc3. [ 2.058843] ALSA device list: [ 2.067181] No soundcards found. [ 2.075776] oprofile: using NMI interrupt. [ 2.084447] IPVS: Registered protocols (TCP, AH, ESP) [ 2.092965] IPVS: Connection hash table configured (size=4096, memory=32Kbytes) [ 2.101488] IPVS: ipvs loaded. [ 2.110089] Initializing XFRM netlink socket [ 2.118294] NET: Registered protocol family 17 [ 2.126469] NET: Registered protocol family 15 [ 2.134554] Using IPI No-Shortcut mode [ 2.174549] kjournald starting. Commit interval 5 seconds [ 2.174559] EXT3-fs: mounted filesystem with ordered data mode. [ 2.174590] VFS: Mounted root (ext3 filesystem) readonly. [ 2.174893] Freeing unused kernel memory: 404k freed [ 2.380013] usb 1-4: new high speed USB device using ehci_hcd and address 3 [ 2.530564] usb 1-4: configuration #1 chosen from 1 choice [ 2.817550] SELinux: 8192 avtab hash slots, 173318 rules. [ 2.930997] SELinux: 8192 avtab hash slots, 173318 rules. [ 3.134684] SELinux: 7 users, 9 roles, 3230 types, 100 bools, 1 sens, 256 cats [ 3.142574] SELinux: 73 classes, 173318 rules [ 3.157895] SELinux: Completing initialization. [ 3.165680] SELinux: Setting up existing superblocks. [ 3.202007] SELinux: initialized (dev sda1, type ext3), uses xattr [ 3.353061] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts [ 3.360943] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts [ 3.368910] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 3.376949] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts [ 3.384970] SELinux: initialized (dev devpts, type devpts), uses transition SIDs [ 3.392988] SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts [ 3.401134] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 3.409267] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts [ 3.417680] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs [ 3.426014] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts [ 3.434357] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs [ 3.442674] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 3.450836] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts [ 3.458715] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts [ 3.466686] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 3.515840] type=1403 audit(1226777323.510:2): policy loaded auid=4294967295 ses=4294967295 [ 4.198670] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 4.370093] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 4.383169] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 9.981585] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 10.889320] ACPI: SSDT 3FEB8C10, 02AE (r1 APPLE Cpu0Ist 3000 INTL 20050309) [ 10.908338] ACPI: SSDT 3FEB8910, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309) [ 10.928114] power_supply ADP1: uevent [ 10.936994] power_supply ADP1: No power supply yet [ 10.945744] power_supply ADP1: power_supply_changed [ 10.954338] ACPI: AC Adapter [ADP1] (on-line) [ 10.963070] power_supply ADP1: power_supply_changed_work [ 10.971813] power_supply ADP1: power_supply_update_gen_leds 1 [ 10.980546] power_supply ADP1: uevent [ 10.988916] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 [ 10.997414] power_supply ADP1: Static prop TYPE=Mains [ 11.005915] power_supply ADP1: 1 dynamic props [ 11.014263] power_supply ADP1: prop ONLINE=1 [ 11.024546] Monitor-Mwait will be used to enter C-1 state [ 11.032952] Monitor-Mwait will be used to enter C-2 state [ 11.041191] Monitor-Mwait will be used to enter C-3 state [ 11.049363] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 11.057418] processor ACPI_CPU:00: registered as cooling_device0 [ 11.065492] ACPI: Processor [CPU0] (supports 8 throttling states) [ 11.081978] ACPI: SSDT 3FEB8F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309) [ 11.091346] ACPI: SSDT 3FEB7F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309) [ 11.100608] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 11.110446] processor ACPI_CPU:01: registered as cooling_device1 [ 11.116459] Marking TSC unstable due to TSC halts in idle [ 11.128731] ACPI: Processor [CPU1] (supports 8 throttling states) [ 11.138443] input: Power Button (FF) as /class/input/input1 [ 11.190183] ACPI: Power Button (FF) [PWRF] [ 11.264328] ACPI Warning (nspredef-0858): \_SB_.BAT0._BIF: Return Package type mismatch at index 9 - found Buffer, expected String [20080926] [ 11.281040] power_supply BAT0: uevent [ 11.289074] power_supply BAT0: No power supply yet [ 11.297344] power_supply BAT0: power_supply_changed [ 11.305661] power_supply BAT0: power_supply_changed_work [ 11.315984] uhci_hcd: USB Universal Host Controller Interface driver [ 11.326195] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 11.336423] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 11.346808] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 11.353857] ACPI: Battery Slot [BAT0] (battery present) [ 11.354041] input: Lid Switch as /class/input/input2 [ 11.376067] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 11.385849] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080 [ 11.395883] usb usb2: configuration #1 chosen from 1 choice [ 11.402946] power_supply BAT0: power_supply_update_bat_leds 4 [ 11.402964] power_supply BAT0: uevent [ 11.402966] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 [ 11.402970] power_supply BAT0: Static prop TYPE=Battery [ 11.402972] power_supply BAT0: 12 dynamic props [ 11.402975] power_supply BAT0: prop STATUS=Full [ 11.402979] power_supply BAT0: prop PRESENT=1 [ 11.402982] power_supply BAT0: prop TECHNOLOGY=Unknown [ 11.402985] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 [ 11.402988] power_supply BAT0: prop VOLTAGE_NOW=12587000 [ 11.402991] power_supply BAT0: prop CURRENT_NOW=0 [ 11.402994] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 [ 11.402997] power_supply BAT0: prop ENERGY_FULL=51200000 [ 11.403000] power_supply BAT0: prop ENERGY_NOW=51200000 [ 11.403002] power_supply BAT0: prop MODEL_NAME=ASMB012 [ 11.403005] power_supply BAT0: prop MANUFACTURER=SMPN012 [ 11.403008] power_supply BAT0: prop SERIAL_NUMBER= [ 11.412755] usb 1-4: firmware: requesting isight.fw [ 11.474268] ath9k: 0.1 [ 11.474313] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 11.474325] ath9k 0000:03:00.0: setting latency timer to 64 [ 11.563807] hub 2-0:1.0: USB hub found [ 11.563821] hub 2-0:1.0: 2 ports detected [ 11.564319] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 11.564330] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 11.564334] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 11.564394] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 11.564431] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060 [ 11.564600] usb usb3: configuration #1 chosen from 1 choice [ 11.564672] hub 3-0:1.0: USB hub found [ 11.564684] hub 3-0:1.0: 2 ports detected [ 11.564974] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 11.564982] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 11.564985] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 11.565048] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 11.565098] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040 [ 11.565273] usb usb4: configuration #1 chosen from 1 choice [ 11.565345] hub 4-0:1.0: USB hub found [ 11.565356] hub 4-0:1.0: 2 ports detected [ 11.565599] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 11.565607] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 11.565610] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 11.565666] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 11.565712] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020 [ 11.565896] usb usb5: configuration #1 chosen from 1 choice [ 11.565961] hub 5-0:1.0: USB hub found [ 11.565972] hub 5-0:1.0: 2 ports detected [ 11.693196] phy0: Selected rate control algorithm 'ath9k_rate_control' [ 11.700843] Registered led device: ath9k-phy0:radio [ 11.700892] Registered led device: ath9k-phy0:assoc [ 11.700949] Registered led device: ath9k-phy0:tx [ 11.700997] Registered led device: ath9k-phy0:rx [ 11.701830] phy0: Atheros 5416: mem=0xf8820000, irq=17 [ 11.901817] ACPI: Lid Switch [LID0] [ 11.908541] input: Power Button (CM) as /class/input/input3 [ 11.932671] ACPI: Power Button (CM) [PWRB] [ 11.939696] input: Sleep Button (CM) as /class/input/input4 [ 11.955702] ACPI: Sleep Button (CM) [SLPB] [ 11.982573] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 12.025772] usbcore: registered new interface driver isight_firmware [ 12.093656] firewire_ohci 0000:0c:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 12.184512] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 12.192639] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 12.200921] firewire_ohci: Added fw-ohci device 0000:0c:03.0, OHCI version 1.10 [ 12.220267] usb 2-2: configuration #1 chosen from 1 choice [ 12.235073] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input5 [ 12.256008] apple 0003:05AC:021A.0001: input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input0 [ 12.280877] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input6 [ 12.291645] hda_codec: STAC922x, Apple subsys_id=106b1e00 [ 12.312386] apple 0003:05AC:021A.0002: input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input2 [ 12.365757] appletouch: Geyser mode initialized. [ 12.375535] input: appletouch as /class/input/input7 [ 12.420406] usbcore: registered new interface driver appletouch [ 12.450042] usb 4-2: new full speed USB device using uhci_hcd and address 2 [ 12.600905] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 12.660317] usb 4-2: configuration #1 chosen from 1 choice [ 12.689279] generic-usb 0003:05AC:8240.0003: hiddev0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2/input0 [ 12.711397] firewire_core: created device fw0: GUID 0019e3fffe2ad87e, S800 [ 12.726781] applesmc: Apple MacBook Pro detected: [ 12.737872] applesmc: - Model with accelerometer [ 12.748714] applesmc: - Model with light sensors and backlight [ 12.759478] applesmc: - Model with 12 temperature sensors [ 12.830130] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 12.842702] applesmc: device successfully initialized (0xe0, 0x00). [ 12.854019] applesmc: device successfully initialized. [ 12.866013] applesmc: 2 fans found. [ 12.878430] input: applesmc as /class/input/input8 [ 12.894777] Registered led device: smc::kbd_backlight [ 12.906133] applesmc: driver successfully loaded. [ 13.002513] Clocksource tsc unstable (delta = -70993048 ns) [ 13.052175] Linux agpgart interface v0.103 [ 13.091058] usb 5-1: configuration #1 chosen from 1 choice [ 13.130412] input: HID 05ac:1000 as /class/input/input9 [ 13.151028] generic-usb 0003:05AC:1000.0004: input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1/input0 [ 13.170091] [drm] Initialized drm 1.1.0 20060810 [ 13.188111] input: HID 05ac:1000 as /class/input/input10 [ 13.202956] generic-usb 0003:05AC:1000.0005: input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1/input1 [ 13.214817] usb 1-4: USB disconnect, address 3 [ 13.244085] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 13.255426] pci 0000:01:00.0: setting latency timer to 64 [ 13.266870] [drm] Initialized radeon 1.29.0 20080528 on minor 0 [ 13.423460] ip_tables: (C) 2000-2006 Netfilter Core Team [ 13.546167] nf_conntrack version 0.5.0 (16142 buckets, 64568 max) [ 13.557064] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 13.567505] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or [ 13.578077] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 13.636548] arp_tables: (C) 2002 David S. Miller [ 13.716178] ieee80211_crypt: registered algorithm 'NULL' [ 13.763902] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 13.774448] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com> [ 13.799751] ieee80211_crypt: registered algorithm 'TKIP' [ 13.892463] usbcore: registered new interface driver uvcvideo [ 13.903162] USB Video Class driver (v0.1.0) [ 13.913749] usb 1-4: new high speed USB device using ehci_hcd and address 6 [ 13.958273] ipmi message handler version 39.2 [ 13.988200] IPMI Watchdog: driver initialized [ 14.081337] usb 1-4: configuration #1 chosen from 1 choice [ 14.082151] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501) [ 14.084609] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26). [ 14.086605] input: Built-in iSight as /class/input/input11 [ 14.268638] Adding 2988360k swap on /dev/sda2. Priority:-1 extents:1 across:2988360k [ 14.676368] EXT3 FS on sda1, internal journal [ 17.905048] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use) [ 18.595153] applesmc: light sensor data length set to 6 [ 19.997819] usb 5-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84 [ 20.014147] Bluetooth: Core ver 2.13 [ 20.018929] NET: Registered protocol family 31 [ 20.018934] Bluetooth: HCI device and connection manager initialized [ 20.018940] Bluetooth: HCI socket layer initialized [ 20.047833] Bluetooth: L2CAP ver 2.11 [ 20.047838] Bluetooth: L2CAP socket layer initialized [ 20.099326] Bluetooth: RFCOMM socket layer initialized [ 20.099368] Bluetooth: RFCOMM TTY layer initialized [ 20.099372] Bluetooth: RFCOMM ver 1.10 [ 20.120444] Bluetooth: SCO (Voice Link) ver 0.6 [ 20.120447] Bluetooth: SCO socket layer initialized [ 20.288022] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.288028] Bluetooth: BNEP filters: protocol multicast [ 20.312716] usb 5-1: USB disconnect, address 2 [ 20.630092] usb 5-1: new full speed USB device using uhci_hcd and address 3 [ 20.839934] usb 5-1: configuration #1 chosen from 1 choice [ 20.919762] Bluetooth: Generic Bluetooth USB driver ver 0.3 [ 20.919960] usbcore: registered new interface driver btusb [ 26.805873] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 26.810159] input: justinmattock’s mouse #1 as /class/input/input12 [ 26.853399] generic-bluetooth 0005:0000:0000.0006: input: BLUETOOTH HID v0.00 Mouse [justinmattock’s mouse #1] on 00:17:F2:B4:BC:F5 [ 31.262857] [drm] Setting GART location based on new memory map [ 31.264435] [drm] Loading R500 Microcode [ 31.264488] [drm] Num pipes: 1 [ 31.264502] [drm] writeback test succeeded in 1 usecs [ 82.680920] wlan0: authenticate with AP 00:1e:2a:00:67:f0 [ 82.682465] wlan0: authenticated [ 82.682471] wlan0: associate with AP 00:1e:2a:00:67:f0 [ 82.686097] wlan0: RX AssocResp from 00:1e:2a:00:67:f0 (capab=0x431 status=0 aid=33) [ 82.686103] wlan0: associated [ 194.711735] type=1400 audit(1226777516.267:3): avc: denied { getattr } for pid=3234 comm="gvfs-hal-volume" path="inotify" dev=inotifyfs ino=1 scontext=a-12:sysadm_r:sysadm_dbusd_t:s0-s0:c0.c255 tcontext=system_u:object_r:inotifyfs_t:s0 tclass=dir [ 194.711762] type=1300 audit(1226777516.267:3): arch=40000003 syscall=197 success=no exit=-13 a0=9 a1=bf9940bc a2=b7d7dff4 a3=9 items=0 ppid=3233 pid=3234 auid=4294967295 uid=1000 gid=1000 euid=1000 suid=1000 fsuid=1000 egid=1000 sgid=1000 fsgid=1000 tty=(none) ses=4294967295 comm="gvfs-hal-volume" exe="/usr/lib/gvfs/gvfs-hal-volume-monitor" subj=a-12:sysadm_r:sysadm_dbusd_t:s0-s0:c0.c255 key=(null) [ 195.082818] type=1400 audit(1226777516.637:4): avc: denied { add_name } for pid=3137 comm="evolution" name="enchant" scontext=a-12:sysadm_r:sysadm_evolution_t:s0-s0:c0.c255 tcontext=a-12:object_r:sysadm_home_t:s0 tclass=dir [ 195.082855] type=1300 audit(1226777516.637:4): arch=40000003 syscall=39 success=no exit=-13 a0=88f81c8 a1=1c0 a2=b6a72ff4 a3=0 items=0 ppid=2834 pid=3137 auid=4294967295 uid=1000 gid=1000 euid=1000 suid=1000 fsuid=1000 egid=1000 sgid=1000 fsgid=1000 tty=(none) ses=4294967295 comm="evolution" exe="/usr/bin/evolution" subj=a-12:sysadm_r:sysadm_evolution_t:s0-s0:c0.c255 key=(null) [ 6738.496584] ACPI: EC: GPE storm detected, transactions will use polling mode [ 8180.194126] type=1400 audit(1226785501.747:5): avc: denied { add_name } for pid=3137 comm="evolution" name="enchant" scontext=a-12:sysadm_r:sysadm_evolution_t:s0-s0:c0.c255 tcontext=a-12:object_r:sysadm_home_t:s0 tclass=dir [ 8180.194163] type=1300 audit(1226785501.747:5): arch=40000003 syscall=39 success=no exit=-13 a0=8992c48 a1=1c0 a2=b6a72ff4 a3=0 items=0 ppid=2834 pid=3137 auid=4294967295 uid=1000 gid=1000 euid=1000 suid=1000 fsuid=1000 egid=1000 sgid=1000 fsgid=1000 tty=(none) ses=4294967295 comm="evolution" exe="/usr/bin/evolution" subj=a-12:sysadm_r:sysadm_evolution_t:s0-s0:c0.c255 key=(null) [ 8217.804363] type=1400 audit(1226785539.360:6): avc: denied { add_name } for pid=3137 comm="evolution" name="enchant" scontext=a-12:sysadm_r:sysadm_evolution_t:s0-s0:c0.c255 tcontext=a-12:object_r:sysadm_home_t:s0 tclass=dir [ 8217.804400] type=1300 audit(1226785539.360:6): arch=40000003 syscall=39 success=no exit=-13 a0=8d35378 a1=1c0 a2=b6a72ff4 a3=0 items=0 ppid=2834 pid=3137 auid=4294967295 uid=1000 gid=1000 euid=1000 suid=1000 fsuid=1000 egid=1000 sgid=1000 fsgid=1000 tty=(none) ses=4294967295 comm="evolution" exe="/usr/bin/evolution" subj=a-12:sysadm_r:sysadm_evolution_t:s0-s0:c0.c255 key=(null) [ 8345.390308] type=1404 audit(1226785666.947:7): enforcing=0 old_enforcing=1 auid=4294967295 ses=4294967295 [ 8345.390396] type=1300 audit(1226785666.947:7): arch=40000003 syscall=4 success=yes exit=1 a0=3 a1=bfa9aa9c a2=1 a3=8048820 items=0 ppid=3530 pid=4041 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts3 ses=4294967295 comm="setenforce" exe="/usr/sbin/setenforce" subj=a-12:sysadm_r:sysadm_t:s0-s0:c0.c255 key=(null) [ 8352.119667] type=1400 audit(1226785673.637:8): avc: denied { search } for pid=3137 comm="evolution" name="gtk-2.0" dev=sda1 ino=335878 scontext=a-12:sysadm_r:sysadm_evolution_t:s0-s0:c0.c255 tcontext=a-12:object_r:sysadm_gnome_home_t:s0 tclass=dir [ 8352.145310] type=1400 audit(1226785673.637:8): avc: denied { read } for pid=3137 comm="evolution" name="gtkfilechooser.ini" dev=sda1 ino=337134 scontext=a-12:sysadm_r:sysadm_evolution_t:s0-s0:c0.c255 tcontext=a-12:object_r:sysadm_gnome_home_t:s0 tclass=file [ 8352.145388] type=1300 audit(1226785673.637:8): arch=40000003 syscall=5 success=yes exit=26 a0=8e50c70 a1=8000 a2=0 a3=8000 items=0 ppid=2834 pid=3137 auid=4294967295 uid=1000 gid=1000 euid=1000 suid=1000 fsuid=1000 egid=1000 sgid=1000 fsgid=1000 tty=(none) ses=4294967295 comm="evolution" exe="/usr/bin/evolution" subj=a-12:sysadm_r:sysadm_evolution_t:s0-s0:c0.c255 key=(null) [ 8352.145462] type=1400 audit(1226785673.702:9): avc: denied { getattr } for pid=3137 comm="evolution" path="/home/a-12/.config/gtk-2.0/gtkfilechooser.ini" dev=sda1 ino=337134 scontext=a-12:sysadm_r:sysadm_evolution_t:s0-s0:c0.c255 tcontext=a-12:object_r:sysadm_gnome_home_t:s0 tclass=file [ 8352.145513] type=1300 audit(1226785673.702:9): arch=40000003 syscall=197 success=yes exit=0 a0=1a a1=bfd6a134 a2=b69b7ff4 a3=1a items=0 ppid=2834 pid=3137 auid=4294967295 uid=1000 gid=1000 euid=1000 suid=1000 fsuid=1000 egid=1000 sgid=1000 fsgid=1000 tty=(none) ses=4294967295 comm="evolution" exe="/usr/bin/evolution" subj=a-12:sysadm_r:sysadm_evolution_t:s0-s0:c0.c255 key=(null) [ 8352.296255] type=1400 audit(1226785673.850:10): avc: denied { getattr } for pid=4044 comm="evolution" path="/home/a-12/.gconf" dev=sda1 ino=336133 scontext=a-12:sysadm_r:sysadm_evolution_t:s0-s0:c0.c255 tcontext=a-12:object_r:sysadm_gconf_home_t:s0 tclass=dir [ 8352.296312] type=1300 audit(1226785673.850:10): arch=40000003 syscall=196 success=yes exit=0 a0=b493afe8 a1=b5243178 a2=b69b7ff4 a3=b493afe8 items=0 ppid=2834 pid=4044 auid=4294967295 uid=1000 gid=1000 euid=1000 suid=1000 fsuid=1000 egid=1000 sgid=1000 fsgid=1000 tty=(none) ses=4294967295 comm="evolution" exe="/usr/bin/evolution" subj=a-12:sysadm_r:sysadm_evolution_t:s0-s0:c0.c255 key=(null) [ 8352.368839] type=1400 audit(1226785673.920:11): avc: denied { getattr } for pid=4044 comm="evolution" path="/home/a-12/tools" dev=sda1 ino=336206 scontext=a-12:sysadm_r:sysadm_evolution_t:s0-s0:c0.c255 tcontext=a-12:object_r:sysadm_home_t:s0 tclass=lnk_file [ 8352.368902] type=1300 audit(1226785673.920:11): arch=40000003 syscall=196 success=yes exit=0 a0=b4902b08 a1=b5243178 a2=b69b7ff4 a3=b4902b08 items=0 ppid=2834 pid=4044 auid=4294967295 uid=1000 gid=1000 euid=1000 suid=1000 fsuid=1000 egid=1000 sgid=1000 fsgid=1000 tty=(none) ses=4294967295 comm="evolution" exe="/usr/bin/evolution" subj=a-12:sysadm_r:sysadm_evolution_t:s0-s0:c0.c255 key=(null) [ 8352.369003] type=1400 audit(1226785673.920:12): avc: denied { read } for pid=4044 comm="evolution" name="tools" dev=sda1 ino=336206 scontext=a-12:sysadm_r:sysadm_evolution_t:s0-s0:c0.c255 tcontext=a-12:object_r:sysadm_home_t:s0 tclass=lnk_file [ 8360.650827] __ratelimit: 15 callbacks suppressed [ 8360.650833] type=1400 audit(1226785682.207:15): avc: denied { read } for pid=3137 comm="evolution" name="gtkfilechooser.ini" dev=sda1 ino=337134 scontext=a-12:sysadm_r:sysadm_evolution_t:s0-s0:c0.c255 tcontext=a-12:object_r:sysadm_gnome_home_t:s0 tclass=file [ 8360.650908] type=1300 audit(1226785682.207:15): arch=40000003 syscall=5 success=yes exit=26 a0=8e65fa0 a1=8000 a2=0 a3=8000 items=0 ppid=2834 pid=3137 auid=4294967295 uid=1000 gid=1000 euid=1000 suid=1000 fsuid=1000 egid=1000 sgid=1000 fsgid=1000 tty=(none) ses=4294967295 comm="evolution" exe="/usr/bin/evolution" subj=a-12:sysadm_r:sysadm_evolution_t:s0-s0:c0.c255 key=(null) [ 8360.651008] type=1400 audit(1226785682.207:16): avc: denied { getattr } for pid=3137 comm="evolution" path="/home/a-12/.config/gtk-2.0/gtkfilechooser.ini" dev=sda1 ino=337134 scontext=a-12:sysadm_r:sysadm_evolution_t:s0-s0:c0.c255 tcontext=a-12:object_r:sysadm_gnome_home_t:s0 tclass=file [ 8360.651060] type=1300 audit(1226785682.207:16): arch=40000003 syscall=197 success=yes exit=0 a0=1a a1=bfd6a224 a2=b69b7ff4 a3=1a items=0 ppid=2834 pid=3137 auid=4294967295 uid=1000 gid=1000 euid=1000 suid=1000 fsuid=1000 egid=1000 sgid=1000 fsgid=1000 tty=(none) ses=4294967295 comm="evolution" exe="/usr/bin/evolution" subj=a-12:sysadm_r:sysadm_evolution_t:s0-s0:c0.c255 key=(null) [ 8360.651358] type=1400 audit(1226785682.207:17): avc: denied { write } for pid=3137 comm="evolution" name="gtk-2.0" dev=sda1 ino=335878 scontext=a-12:sysadm_r:sysadm_evolution_t:s0-s0:c0.c255 tcontext=a-12:object_r:sysadm_gnome_home_t:s0 tclass=dir [ 8360.651408] type=1400 audit(1226785682.207:17): avc: denied { add_name } for pid=3137 comm="evolution" name="gtkfilechooser.ini.9ZLKKU" scontext=a-12:sysadm_r:sysadm_evolution_t:s0-s0:c0.c255 tcontext=a-12:object_r:sysadm_gnome_home_t:s0 tclass=dir [ 8360.651522] type=1400 audit(1226785682.207:17): avc: denied { create } for pid=3137 comm="evolution" name="gtkfilechooser.ini.9ZLKKU" scontext=a-12:sysadm_r:sysadm_evolution_t:s0-s0:c0.c255 tcontext=a-12:object_r:sysadm_gnome_home_t:s0 tclass=file [ 8360.651733] type=1400 audit(1226785682.207:17): avc: denied { write } for pid=3137 comm="evolution" name="gtkfilechooser.ini.9ZLKKU" dev=sda1 ino=337135 scontext=a-12:sysadm_r:sysadm_evolution_t:s0-s0:c0.c255 tcontext=a-12:object_r:sysadm_gnome_home_t:s0 tclass=file [ 8360.651800] type=1300 audit(1226785682.207:17): arch=40000003 syscall=5 success=yes exit=26 a0=8e6ad08 a1=80c2 a2=1b6 a3=80c2 items=0 ppid=2834 pid=3137 auid=4294967295 uid=1000 gid=1000 euid=1000 suid=1000 fsuid=1000 egid=1000 sgid=1000 fsgid=1000 tty=(none) ses=4294967295 comm="evolution" exe="/usr/bin/evolution" subj=a-12:sysadm_r:sysadm_evolution_t:s0-s0:c0.c255 key=(null) [ 8360.652125] type=1400 audit(1226785682.207:18): avc: denied { remove_name } for pid=3137 comm="evolution" name="gtkfilechooser.ini.9ZLKKU" dev=sda1 ino=337135 scontext=a-12:sysadm_r:sysadm_evolution_t:s0-s0:c0.c255 tcontext=a-12:object_r:sysadm_gnome_home_t:s0 tclass=dir ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: ACPI: EC: GPE storm detected, transactions will use polling mode 2008-11-15 19:19 ` Rafael J. Wysocki 2008-11-15 19:45 ` Justin P. Mattock 2008-11-15 21:48 ` Justin P. Mattock @ 2008-11-16 6:41 ` Justin P. Mattock 2008-11-16 9:49 ` Alexey Starikovskiy 2 siblings, 1 reply; 15+ messages in thread From: Justin P. Mattock @ 2008-11-16 6:41 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Alan Jenkins, Alexey Starikovskiy, Andrew Morton, Linux Kernel Mailing List, linux-acpi, Len Brown On Sat, 2008-11-15 at 20:19 +0100, Rafael J. Wysocki wrote: > On Saturday, 15 of November 2008, Justin Mattock wrote: > > On Sat, Nov 15, 2008 at 4:06 AM, Alan Jenkins > > <alan-jenkins@tuffmail.co.uk> wrote: > > > Rafael J. Wysocki wrote: > > >> > > >> On Saturday, 15 of November 2008, Alan Jenkins wrote: > > >> > > >>> > > >>> On Sat, Nov 15, 2008 at 9:23 AM, Alexey Starikovskiy <aystarik@gmail.com> > > >>> wrote: > > >>> > > >>>> > > >>>> Andrew Morton wrote: > > >>>> > > >>>>> > > >>>>> (cc linux-acpi) > > >>>>> > > >>>>> On Fri, 14 Nov 2008 20:16:17 -0800 "Justin P. Mattock" > > >>>>> <justinmattock@gmail.com> wrote: > > >>>>> > > >>>>> > > >>>>>> > > >>>>>> just pulled the latest git today and am now noticing > > >>>>>> the lovely gpe storm being triggered.(dmesg below); > > >>>>>> > > >>>>> > > >>>>> Are any other effects observeable? > > >>>>> > > >>>>> I assume that 2.6.27 didn't do this. > > >>>>> > > >>>>> > > >>>> > > >>>> It did. Justin even opened a bug -- #11724. > > >>>> > > >>> > > >>> In case anyone else tries to follow that, it's actually #10724 :). > > >>> > > >> > > >> Yes, the "transaction in interrupt context" patch fixed that IIRC and the > > >> one > > >> of the patches in the recet ACPI merge broke it again. > > >> > > >> Justin, can you see if reverting one or more of the following commits > > >> helps: > > >> > > >> > > >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=8517934ef6aaa28d6e055b98df65b31cedbd1372 > > >> > > >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=06cf7d3c7af902939cd1754abcafb2464060cba8 > > >> > > >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=0b7084ac67fb84f0cf2f8bc02d7e0dea8521dd2d > > >> > > >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=a2f93aeadf97e870ff385030633a73e21146815d > > >> > > >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=dd15f8c42af09031e27da5b4d697ce925511f2e1 > > >> > > >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=f8248434e6a11d7cd314281be3b39bbcf82fc243 > > >> > > >> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=1cfe62c8010ac56e1bd3827e30386a87cc2f3594 > > >> > > >> (please revert in this order)? > > >> > > > > > > Be aware there's a real possibility this was only a cosmetic fix (and > > > regression). > > > > > > I think the original GPE storm avoidance printed that message by default. > > > Then the "transaction in interrupt context" made the message into a > > > pr_debug(), - i.e. disabled it by default. And then my "make messages more > > > useful when GPE storm is detected" re-enabled it. > > > > > > IIRC, this flip-flopping is contained within 2.6.28-rc. I.e. I don't think > > > it will show up as a (cosmetic) regression when jumping straight from 2.6.27 > > > to 2.6.28. Though I suspect it will shows up between certain versions of > > > -stable. > > > > > > Regards > > > Alan > > > > > > > O.K. I think I was wrong about stating > > this was not caused by the discharging and charging of the battery. > > to retrace my steps > > yesterday I pulled, then recompiled, then > > let the system idle for a few, then once I moved the computer to the > > other room,(unplugged/plugged the A/C adapter) > > the light turned orange on the A/C adapter then once > > the battery became fully charged(green light on A/C adapter) > > the gpe storm was triggered. Once I saw the gpe storm, I rebooted > > (under the impression the battery was in a good state), > > instantly the gpe storm was triggered. leading me > > to beleive this was something else. > > So after seeing that and sending a post I used the > > acpi_osi=Darwin option sat had a beer and worried about it tomorrow. > > Now when I woke up, and saw the commits from rafael(thanks for the help) > > I decided to make sure this was reproducible, So removing the acpi_osi option, > > then let the system idled. To my amazement the > > gpe storm was not triggered at all. > > (even unplugging and plugging the A/C multiple times had no effect) > > After a while thinking what the hell is going on here, I decided to discharge > > the battery to around 97% or 5 min. and then charge to see if this > > triggers the gpe storm. Well sure enough it did.(attached is dmesg); > > > > So for now should I go and individually revert the commits; charge, > > and discharge > > to locate the culprit, or is this something completely different? > > Well, you have only one > "ACPI: EC: GPE storm detected, transactions will use polling mode" message in > the log, so the EC code seems to work as expected and you _really_ have an > interrupt storm that is worked around. > > Not sure what's causing it to happen, though. > > Thanks, > Rafael Well; reverting: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=06cf7d3c7af902939cd1754abcafb2464060cba8 is keeping the system from having a gpe storm (for at least four hours now); haven't had a chance to drain the battery and see the affects from that scenario. regards; -- Justin P. Mattock <justinmattock@gmail.com> ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: ACPI: EC: GPE storm detected, transactions will use polling mode 2008-11-16 6:41 ` Justin P. Mattock @ 2008-11-16 9:49 ` Alexey Starikovskiy 2008-11-16 12:44 ` Rafael J. Wysocki 2008-11-16 16:56 ` Justin P. Mattock 0 siblings, 2 replies; 15+ messages in thread From: Alexey Starikovskiy @ 2008-11-16 9:49 UTC (permalink / raw) To: Justin P. Mattock Cc: Rafael J. Wysocki, Alan Jenkins, Andrew Morton, Linux Kernel Mailing List, linux-acpi, Len Brown Justin P. Mattock wrote: > Well; reverting: > http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=06cf7d3c7af902939cd1754abcafb2464060cba8 > is keeping the system from having a gpe storm > (for at least four hours now); > haven't had a chance to drain the battery and see > the affects from that scenario. > > Justin, by decreasing threshold, we just change how often _detection_ of the storm fires, not the storm itself. Regards, Alex. ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: ACPI: EC: GPE storm detected, transactions will use polling mode 2008-11-16 9:49 ` Alexey Starikovskiy @ 2008-11-16 12:44 ` Rafael J. Wysocki 2008-11-16 15:31 ` Justin P. Mattock 2008-11-16 16:56 ` Justin P. Mattock 1 sibling, 1 reply; 15+ messages in thread From: Rafael J. Wysocki @ 2008-11-16 12:44 UTC (permalink / raw) To: Alexey Starikovskiy, Justin P. Mattock Cc: Alan Jenkins, Andrew Morton, Linux Kernel Mailing List, linux-acpi, Len Brown On Sunday, 16 of November 2008, Alexey Starikovskiy wrote: > Justin P. Mattock wrote: > > Well; reverting: > > http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=06cf7d3c7af902939cd1754abcafb2464060cba8 > > is keeping the system from having a gpe storm > > (for at least four hours now); > > haven't had a chance to drain the battery and see > > the affects from that scenario. > > > > > Justin, by decreasing threshold, we just change how often _detection_ of > the storm fires, not the storm itself. Yes, I think what happens is that we just detect the interrupt storm with the lower threshold, so the storm occured anyway previously, but it went unnoticed (not necessarily a good thing). There is nothing to worry about as long as the box works as expected. Thanks, Rafael ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: ACPI: EC: GPE storm detected, transactions will use polling mode 2008-11-16 12:44 ` Rafael J. Wysocki @ 2008-11-16 15:31 ` Justin P. Mattock 0 siblings, 0 replies; 15+ messages in thread From: Justin P. Mattock @ 2008-11-16 15:31 UTC (permalink / raw) To: Rafael J. Wysocki Cc: Alexey Starikovskiy, Alan Jenkins, Andrew Morton, Linux Kernel Mailing List, ACPI, Len Brown Cool, Then I'll just leave it as is And move on to other tasks that I have. Thanks for the info and help Regards; justin P. Mattock On Nov 16, 2008, at 4:44 AM, "Rafael J. Wysocki" <rjw@sisk.pl> wrote: > On Sunday, 16 of November 2008, Alexey Starikovskiy wrote: >> Justin P. Mattock wrote: >>> Well; reverting: >>> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=06cf7d3c7af902939cd1754abcafb2464060cba8 >>> is keeping the system from having a gpe storm >>> (for at least four hours now); >>> haven't had a chance to drain the battery and see >>> the affects from that scenario. >>> >>> >> Justin, by decreasing threshold, we just change how often >> _detection_ of >> the storm fires, not the storm itself. > > Yes, I think what happens is that we just detect the interrupt storm > with the > lower threshold, so the storm occured anyway previously, but it went > unnoticed > (not necessarily a good thing). > > There is nothing to worry about as long as the box works as expected. > > Thanks, > Rafael ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: ACPI: EC: GPE storm detected, transactions will use polling mode 2008-11-16 9:49 ` Alexey Starikovskiy 2008-11-16 12:44 ` Rafael J. Wysocki @ 2008-11-16 16:56 ` Justin P. Mattock 1 sibling, 0 replies; 15+ messages in thread From: Justin P. Mattock @ 2008-11-16 16:56 UTC (permalink / raw) To: Alexey Starikovskiy Cc: Rafael J. Wysocki, Alan Jenkins, Andrew Morton, Linux Kernel Mailing List, linux-acpi, Len Brown On Sun, 2008-11-16 at 12:49 +0300, Alexey Starikovskiy wrote: > Justin P. Mattock wrote: > > Well; reverting: > > http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=06cf7d3c7af902939cd1754abcafb2464060cba8 > > is keeping the system from having a gpe storm > > (for at least four hours now); > > haven't had a chance to drain the battery and see > > the affects from that scenario. > > > > > Justin, by decreasing threshold, we just change how often _detection_ of > the storm fires, not the storm itself. > > Regards, > Alex. So increasing the threshold was a good thing (reveal the problem, not hide the problem); As for the cause itself, is there any tool that can be used to at-least gain any info on this? >From looking at the situation from here with a macbook, the interaction with the battery seems to be the cause, but then on other notebooks it's another situation.(making this problem very intricate). Anyways I don't have a problem changing the threshold or using a boot param, to keep this in somewhat control for the time being until there is a solution. let me know how I can help. regards; -- Justin P. Mattock <justinmattock@gmail.com> ^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2008-11-16 16:56 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1226722577.3104.4.camel@LiNuX>
2008-11-15 6:43 ` ACPI: EC: GPE storm detected, transactions will use polling mode Andrew Morton
2008-11-15 6:56 ` Justin P. Mattock
2008-11-15 9:23 ` Alexey Starikovskiy
2008-11-15 10:37 ` Alan Jenkins
2008-11-15 11:36 ` Rafael J. Wysocki
2008-11-15 12:06 ` Alan Jenkins
2008-11-15 18:39 ` Justin Mattock
2008-11-15 19:19 ` Rafael J. Wysocki
2008-11-15 19:45 ` Justin P. Mattock
2008-11-15 21:48 ` Justin P. Mattock
2008-11-16 6:41 ` Justin P. Mattock
2008-11-16 9:49 ` Alexey Starikovskiy
2008-11-16 12:44 ` Rafael J. Wysocki
2008-11-16 15:31 ` Justin P. Mattock
2008-11-16 16:56 ` Justin P. Mattock
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox