* CPI message on bootup for kernel .. CPU AMD Phenom II X3 (ACPI _PSS objects)
@ 2009-03-05 12:32 Thomas Raschbacher
2009-03-06 1:04 ` yakui_zhao
0 siblings, 1 reply; 2+ messages in thread
From: Thomas Raschbacher @ 2009-03-05 12:32 UTC (permalink / raw)
To: linux-acpi
[-- Attachment #1: Type: text/plain, Size: 583 bytes --]
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi.
I got a message about ACPI _PSS objects on bootup and that I should =
contact
the ACPI Maintainers.. So I'm doing this now.
dmesg as attachment ..
I got an ASUS M4A78T-E mainboard and an AMD Phenom II X3 cpu (AM3 socket)
If u need more info please let me know.
Regards
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.9 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iEYEARECAAYFAkmvxcIACgkQv20tKfoYgelJzQCdHLTQhH72ECvANp7+eaU2A9xF
dFoAnRTDoyO//juDlOpVFRt3QdoqHB6B
=38I0
-----END PGP SIGNATURE-----
[-- Attachment #2: desktopX3_dmesg2009-03-05.txt --]
[-- Type: text/plain, Size: 66786 bytes --]
[ 0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28-gentoo-r2ATH64 (root@livecd) (gcc version 4.3.3 (Gentoo 4.3.3 p1.0, pie-10.1.5) ) #2 SMP Tue Mar 3 19:57:28 Local time zone must be set--see zic m
[ 0.000000] Command line: root=/dev/sda1
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000d7f90000 (usable)
[ 0.000000] BIOS-e820: 00000000d7f90000 - 00000000d7fa8000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000d7fa8000 - 00000000d7fd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000d7fd0000 - 00000000d8000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000128000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x128000 max_arch_pfn = 0x3ffffffff
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xd7f90 max_arch_pfn = 0x3ffffffff
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e6000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000d7f90000 (usable)
[ 0.000000] modified: 00000000d7f90000 - 00000000d7fa8000 (ACPI data)
[ 0.000000] modified: 00000000d7fa8000 - 00000000d7fd0000 (ACPI NVS)
[ 0.000000] modified: 00000000d7fd0000 - 00000000d8000000 (reserved)
[ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000128000000 (usable)
[ 0.000000] init_memory_mapping: 0000000000000000-00000000d7f90000
[ 0.000000] 0000000000 - 00d7e00000 page 2M
[ 0.000000] 00d7e00000 - 00d7f90000 page 4k
[ 0.000000] kernel direct mapping tables up to d7f90000 @ 10000-16000
[ 0.000000] last_map_addr: d7f90000 end: d7f90000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000128000000
[ 0.000000] 0100000000 - 0128000000 page 2M
[ 0.000000] kernel direct mapping tables up to 128000000 @ 14000-1a000
[ 0.000000] last_map_addr: 128000000 end: 128000000
[ 0.000000] ACPI: RSDP 000FB8B0, 0014 (r0 ACPIAM)
[ 0.000000] ACPI: RSDT D7F90000, 0038 (r1 011009 RSDT1456 20090110 MSFT 97)
[ 0.000000] ACPI: FACP D7F90200, 0084 (r1 011009 FACP1456 20090110 MSFT 97)
[ 0.000000] ACPI Warning (tbfadt-0460): Optional field "Pm2ControlBlock" has zero address or length: 0000000000000000/1 [20080926]
[ 0.000000] ACPI: DSDT D7F90440, D92D (r1 A1152 A1152000 0 INTL 20060113)
[ 0.000000] ACPI: FACS D7FA8000, 0040
[ 0.000000] ACPI: APIC D7F90390, 006C (r1 011009 APIC1456 20090110 MSFT 97)
[ 0.000000] ACPI: MCFG D7F90400, 003C (r1 011009 OEMMCFG 20090110 MSFT 97)
[ 0.000000] ACPI: OEMB D7FA8040, 0072 (r1 011009 OEMB1456 20090110 MSFT 97)
[ 0.000000] ACPI: HPET D7F9F440, 0038 (r1 011009 OEMHPET 20090110 MSFT 97)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000128000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000128000000
[ 0.000000] NODE_DATA [0000000000015000 - 0000000000019fff]
[ 0.000000] bootmap [000000000001a000 - 000000000003efff] pages 25
[ 0.000000] (6 early reservations) ==> bootmem [0000000000 - 0128000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 000095333c] TEXT DATA BSS ==> [0000200000 - 000095333c]
[ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #4 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
[ 0.000000] #5 [0000014000 - 0000015000] PGTABLE ==> [0000014000 - 0000015000]
[ 0.000000] found SMP MP-table at [ffff8800000ff780] 000ff780
[ 0.000000] [ffffe20000000000-ffffe200041fffff] PMD -> [ffff880028200000-ffff88002bbfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00128000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000d7f90
[ 0.000000] 0: 0x00100000 -> 0x00128000
[ 0.000000] On node 0 totalpages: 1048351
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1981 pages reserved
[ 0.000000] DMA zone: 1946 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 866248 pages, LIFO batch:31
[ 0.000000] Normal zone: 2240 pages used for memmap
[ 0.000000] Normal zone: 161600 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 3, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 1 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
[ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000d7f90000 - 00000000d7fa8000
[ 0.000000] PM: Registered nosave memory: 00000000d7fa8000 - 00000000d7fd0000
[ 0.000000] PM: Registered nosave memory: 00000000d7fd0000 - 00000000d8000000
[ 0.000000] PM: Registered nosave memory: 00000000d8000000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dc000000 (gap: d8000000:27f00000)
[ 0.000000] PERCPU: Allocating 57344 bytes of per cpu data
[ 0.000000] per cpu data for cpu0 on node0 at 0000000028022000
[ 0.000000] per cpu data for cpu1 on node0 at 0000000028030000
[ 0.000000] per cpu data for cpu2 on node0 at 000000002803e000
[ 0.000000] per cpu data for cpu3 on node0 at 000000002804c000
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029794
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/sda1
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2809.631 MHz processor.
[ 0.000999] Console: colour VGA+ 80x25
[ 0.000999] console [tty0] enabled
[ 0.000999] Scanning for low memory corruption every 60 seconds
[ 0.000999] Checking aperture...
[ 0.000999] No AGP bridge found
[ 0.000999] Node 0: aperture @ 20000000 size 32 MB
[ 0.000999] Aperture pointing to e820 RAM. Ignoring.
[ 0.000999] Your BIOS doesn't leave a aperture memory hole
[ 0.000999] Please enable the IOMMU option in the BIOS setup
[ 0.000999] This costs you 64 MB of RAM
[ 0.000999] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.000999] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.000999] Memory: 4060432k/4849664k available (3399k kernel code, 656260k absent, 132972k reserved, 2371k data, 508k init)
[ 0.000999] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000999] hpet clockevent registered
[ 0.000999] HPET: 4 timers in total, 1 timers will be used for per-cpu timer
[ 0.001006] Calibrating delay loop (skipped), value calculated using timer frequency.. 5619.25 BogoMIPS (lpj=2809627)
[ 0.001567] Security Framework initialized
[ 0.002003] SELinux: Disabled at boot.
[ 0.002524] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.004232] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.004978] Mount-cache hash table entries: 256
[ 0.005089] Initializing cgroup subsys ns
[ 0.005364] Initializing cgroup subsys cpuacct
[ 0.005647] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.006001] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.006275] CPU 0/0x0 -> Node 0
[ 0.006547] tseg: 0000000000
[ 0.006553] CPU: Physical Processor ID: 0
[ 0.007000] CPU: Processor Core ID: 0
[ 0.007277] using C1E aware idle routine
[ 0.007558] ACPI: Core revision 20080926
[ 0.021030] Setting APIC routing to flat
[ 0.022144] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.032423] CPU0: AMD Phenom(tm) II X3 720 Processor stepping 02
[ 0.032994] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.000999] Initializing CPU#1
[ 0.000999] Calibrating delay using timer specific routine.. 5619.17 BogoMIPS (lpj=2809589)
[ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000999] CPU 1/0x1 -> Node 0
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 1
[ 0.000999] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.103785] CPU1: AMD Phenom(tm) II X3 720 Processor stepping 02
[ 0.104296] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.105044] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.000999] Initializing CPU#2
[ 0.000999] Calibrating delay using timer specific routine.. 5619.19 BogoMIPS (lpj=2809595)
[ 0.000999] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.000999] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.000999] CPU 2/0x2 -> Node 0
[ 0.000999] CPU: Physical Processor ID: 0
[ 0.000999] CPU: Processor Core ID: 2
[ 0.000999] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[ 0.177843] CPU2: AMD Phenom(tm) II X3 720 Processor stepping 02
[ 0.178284] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.178994] Brought up 3 CPUs
[ 0.179974] Total of 3 processors activated (16857.62 BogoMIPS).
[ 0.180304] khelper used greatest stack depth: 5968 bytes left
[ 0.181025] net_namespace: 1344 bytes
[ 0.181446] Time: 8:19:05 Date: 03/05/09
[ 0.181738] NET: Registered protocol family 16
[ 0.181999] node 0 link 0: io port [1000, ffffff]
[ 0.181999] TOM: 00000000d8000000 aka 3456M
[ 0.182252] Fam 10h mmconf [e0000000, efffffff]
[ 0.182254] node 0 link 0: mmio [a0000, bffff]
[ 0.182256] node 0 link 0: mmio [d8000000, dfffffff]
[ 0.182257] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.182259] node 0 link 0: mmio [f0000000, ffefffff]
[ 0.182261] TOM2: 0000000128000000 aka 4736M
[ 0.182534] bus: [00,07] on node 0 link 0
[ 0.182535] bus: 00 index 0 io port: [0, ffff]
[ 0.182537] bus: 00 index 1 mmio: [a0000, bffff]
[ 0.182538] bus: 00 index 2 mmio: [d8000000, dfffffff]
[ 0.182539] bus: 00 index 3 mmio: [f0000000, ffffffff]
[ 0.182541] bus: 00 index 4 mmio: [128000000, fcffffffff]
[ 0.182554] ACPI: bus type pci registered
[ 0.182998] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.183268] PCI: Not using MMCONFIG.
[ 0.183540] PCI: Using configuration type 1 for base access
[ 0.183973] PCI: Using configuration type 1 for extended access
[ 0.184999] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.185251] mtrr: probably your BIOS does not setup all CPUs.
[ 0.185525] mtrr: corrected configuration.
[ 0.189382] ACPI: EC: Look up EC in DSDT
[ 0.222513] ACPI: Interpreter enabled
[ 0.222789] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.223235] ACPI: Using IOAPIC for interrupt routing
[ 0.223568] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.229591] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.235524] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.245068] ACPI: No dock devices found.
[ 0.245409] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.246011] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.246288] pci 0000:00:02.0: PME# disabled
[ 0.246583] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.246860] pci 0000:00:06.0: PME# disabled
[ 0.246979] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.247256] pci 0000:00:07.0: PME# disabled
[ 0.247574] pci 0000:00:11.0: reg 10 io port: [0xb000-0xb007]
[ 0.247580] pci 0000:00:11.0: reg 14 io port: [0xa000-0xa003]
[ 0.247586] pci 0000:00:11.0: reg 18 io port: [0x9000-0x9007]
[ 0.247592] pci 0000:00:11.0: reg 1c io port: [0x8000-0x8003]
[ 0.247597] pci 0000:00:11.0: reg 20 io port: [0x7000-0x700f]
[ 0.247603] pci 0000:00:11.0: reg 24 32bit mmio: [0xf3fffc00-0xf3ffffff]
[ 0.247619] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.247988] pci 0000:00:12.0: reg 10 32bit mmio: [0xf3ffd000-0xf3ffdfff]
[ 0.248034] pci 0000:00:12.1: reg 10 32bit mmio: [0xf3ffe000-0xf3ffefff]
[ 0.248096] pci 0000:00:12.2: reg 10 32bit mmio: [0xf3fff800-0xf3fff8ff]
[ 0.248130] pci 0000:00:12.2: supports D1 D2
[ 0.248131] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.248409] pci 0000:00:12.2: PME# disabled
[ 0.248709] pci 0000:00:13.0: reg 10 32bit mmio: [0xf3ffb000-0xf3ffbfff]
[ 0.248755] pci 0000:00:13.1: reg 10 32bit mmio: [0xf3ffc000-0xf3ffcfff]
[ 0.248817] pci 0000:00:13.2: reg 10 32bit mmio: [0xf3fff400-0xf3fff4ff]
[ 0.248965] pci 0000:00:13.2: supports D1 D2
[ 0.248966] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.249244] pci 0000:00:13.2: PME# disabled
[ 0.249611] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.249616] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.249622] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.249627] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.249633] pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
[ 0.249682] pci 0000:00:14.2: reg 10 64bit mmio: [0xf3ff4000-0xf3ff7fff]
[ 0.249712] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.249964] pci 0000:00:14.2: PME# disabled
[ 0.250324] pci 0000:00:14.5: reg 10 32bit mmio: [0xf3ffa000-0xf3ffafff]
[ 0.250434] pci 0000:01:00.0: reg 10 32bit mmio: [0xf4000000-0xf7ffffff]
[ 0.250441] pci 0000:01:00.0: reg 14 64bit mmio: [0xd8000000-0xdfffffff]
[ 0.250449] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfaffffff]
[ 0.250456] pci 0000:01:00.0: reg 30 32bit mmio: [0xfbce0000-0xfbcfffff]
[ 0.250505] pci 0000:00:02.0: bridge 32bit mmio: [0xf4000000-0xfbcfffff]
[ 0.250508] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd8000000-0xdfffffff]
[ 0.250548] pci 0000:02:00.0: reg 10 64bit mmio: [0xfbdc0000-0xfbdfffff]
[ 0.250554] pci 0000:02:00.0: reg 18 io port: [0xcc00-0xcc7f]
[ 0.250582] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.250860] pci 0000:02:00.0: PME# disabled
[ 0.251008] pci 0000:00:06.0: bridge io port: [0xc000-0xcfff]
[ 0.251010] pci 0000:00:06.0: bridge 32bit mmio: [0xfbd00000-0xfbdfffff]
[ 0.251071] pci 0000:03:00.0: reg 10 64bit mmio: [0xfbeff800-0xfbefffff]
[ 0.251080] pci 0000:03:00.0: reg 18 io port: [0xd800-0xd8ff]
[ 0.251124] pci 0000:03:00.0: supports D2
[ 0.251125] pci 0000:03:00.0: PME# supported from D2 D3hot D3cold
[ 0.251405] pci 0000:03:00.0: PME# disabled
[ 0.251732] pci 0000:00:07.0: bridge io port: [0xd000-0xdfff]
[ 0.251734] pci 0000:00:07.0: bridge 32bit mmio: [0xfbe00000-0xfbefffff]
[ 0.251987] pci 0000:04:05.0: reg 10 io port: [0xe800-0xe8ff]
[ 0.251994] pci 0000:04:05.0: reg 14 32bit mmio: [0xfbfffc00-0xfbfffcff]
[ 0.252034] pci 0000:04:05.0: supports D1 D2
[ 0.252035] pci 0000:04:05.0: PME# supported from D1 D2 D3hot
[ 0.252314] pci 0000:04:05.0: PME# disabled
[ 0.252612] pci 0000:04:06.0: reg 10 32bit mmio: [0xfbffe000-0xfbffefff]
[ 0.252688] pci 0000:00:14.4: transparent bridge
[ 0.252964] pci 0000:00:14.4: bridge io port: [0xe000-0xefff]
[ 0.252967] pci 0000:00:14.4: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
[ 0.252985] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.253362] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.253478] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
[ 0.253585] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
[ 0.253710] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.257058] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 *7 10 11 12 14 15)
[ 0.257780] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
[ 0.258497] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 12 14 15)
[ 0.259085] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
[ 0.259802] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 *10 11 12 14 15)
[ 0.260602] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 *10 11 12 14 15)
[ 0.261085] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 *11 12 14 15)
[ 0.262031] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
[ 0.263004] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - D9, should be D0 [20080926]
[ 0.263608] SCSI subsystem initialized
[ 0.264001] libata version 3.00 loaded.
[ 0.264016] usbcore: registered new interface driver usbfs
[ 0.264248] usbcore: registered new interface driver hub
[ 0.264961] usbcore: registered new device driver usb
[ 0.265241] PCI: Using ACPI for IRQ routing
[ 0.271984] cfg80211: Using static regulatory domain info
[ 0.272238] cfg80211: Regulatory domain: US
[ 0.272512] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 0.272960] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 0.273237] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.273515] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.273793] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.273959] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 0.274236] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 0.274513] cfg80211: Calling CRDA for country: US
[ 0.274973] NetLabel: Initializing
[ 0.275232] NetLabel: domain hash size = 128
[ 0.275507] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.275789] NetLabel: unlabeled traffic allowed by default
[ 0.276065] PCI-DMA: Disabling AGP.
[ 0.276391] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.276958] PCI-DMA: using GART IOMMU.
[ 0.277233] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.279059] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 2303, 0
[ 0.279514] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.280978] hpet: hpet2 irq 2303 for MSI
[ 0.285980] pnp: PnP ACPI init
[ 0.286265] ACPI: bus type pnp registered
[ 0.291690] pnp: PnP ACPI: found 16 devices
[ 0.291968] ACPI: ACPI bus type pnp unregistered
[ 0.292251] system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
[ 0.292529] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.292810] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[ 0.293090] system 00:0a: ioport range 0x40b-0x40b has been reserved
[ 0.293368] system 00:0a: ioport range 0x4d6-0x4d6 has been reserved
[ 0.293645] system 00:0a: ioport range 0xc00-0xc01 has been reserved
[ 0.293922] system 00:0a: ioport range 0xc14-0xc14 has been reserved
[ 0.294202] system 00:0a: ioport range 0xc50-0xc51 has been reserved
[ 0.294479] system 00:0a: ioport range 0xc52-0xc52 has been reserved
[ 0.294756] system 00:0a: ioport range 0xc6c-0xc6c has been reserved
[ 0.295035] system 00:0a: ioport range 0xc6f-0xc6f has been reserved
[ 0.295312] system 00:0a: ioport range 0xcd0-0xcd1 has been reserved
[ 0.295589] system 00:0a: ioport range 0xcd2-0xcd3 has been reserved
[ 0.295866] system 00:0a: ioport range 0xcd4-0xcd5 has been reserved
[ 0.296146] system 00:0a: ioport range 0xcd6-0xcd7 has been reserved
[ 0.296423] system 00:0a: ioport range 0xcd8-0xcdf has been reserved
[ 0.296700] system 00:0a: ioport range 0xb00-0xb3f has been reserved
[ 0.296979] system 00:0a: ioport range 0x800-0x89f has been reserved
[ 0.297256] system 00:0a: ioport range 0xb00-0xb0f has been reserved
[ 0.297534] system 00:0a: ioport range 0xb20-0xb3f has been reserved
[ 0.297810] system 00:0a: ioport range 0x900-0x90f has been reserved
[ 0.298090] system 00:0a: ioport range 0x910-0x91f has been reserved
[ 0.298367] system 00:0a: ioport range 0xfe00-0xfefe has been reserved
[ 0.298645] system 00:0a: iomem range 0xffb80000-0xffbfffff has been reserved
[ 0.298924] system 00:0a: iomem range 0xfec10000-0xfec1001f has been reserved
[ 0.299206] system 00:0d: ioport range 0x230-0x23f has been reserved
[ 0.299483] system 00:0d: ioport range 0x290-0x29f has been reserved
[ 0.299762] system 00:0d: ioport range 0xf40-0xf4f has been reserved
[ 0.300042] system 00:0d: ioport range 0xa30-0xa3f has been reserved
[ 0.300321] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.300600] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[ 0.300877] system 00:0f: iomem range 0xc0000-0xcffff has been reserved
[ 0.301158] system 00:0f: iomem range 0xe0000-0xfffff could not be reserved
[ 0.301435] system 00:0f: iomem range 0x100000-0xd7ffffff could not be reserved
[ 0.301947] system 00:0f: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.307150] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 0.307427] pci 0000:00:02.0: IO window: disabled
[ 0.307704] pci 0000:00:02.0: MEM window: 0xf4000000-0xfbcfffff
[ 0.307984] pci 0000:00:02.0: PREFETCH window: 0x000000d8000000-0x000000dfffffff
[ 0.308496] pci 0000:00:06.0: PCI bridge, secondary bus 0000:02
[ 0.308773] pci 0000:00:06.0: IO window: 0xc000-0xcfff
[ 0.309052] pci 0000:00:06.0: MEM window: 0xfbd00000-0xfbdfffff
[ 0.309329] pci 0000:00:06.0: PREFETCH window: disabled
[ 0.309606] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
[ 0.309883] pci 0000:00:07.0: IO window: 0xd000-0xdfff
[ 0.310162] pci 0000:00:07.0: MEM window: 0xfbe00000-0xfbefffff
[ 0.310439] pci 0000:00:07.0: PREFETCH window: disabled
[ 0.310716] pci 0000:00:14.4: PCI bridge, secondary bus 0000:04
[ 0.310996] pci 0000:00:14.4: IO window: 0xe000-0xefff
[ 0.311274] pci 0000:00:14.4: MEM window: 0xfbf00000-0xfbffffff
[ 0.311552] pci 0000:00:14.4: PREFETCH window: disabled
[ 0.311837] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.312119] pci 0000:00:02.0: setting latency timer to 64
[ 0.312122] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.312400] pci 0000:00:06.0: setting latency timer to 64
[ 0.312404] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.312681] pci 0000:00:07.0: setting latency timer to 64
[ 0.312687] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.312964] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[ 0.313241] bus: 01 index 0 mmio: [0x0-0x0]
[ 0.313514] bus: 01 index 1 mmio: [0xf4000000-0xfbcfffff]
[ 0.313790] bus: 01 index 2 mmio: [0xd8000000-0xdfffffff]
[ 0.314068] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.314342] bus: 02 index 0 io port: [0xc000-0xcfff]
[ 0.314618] bus: 02 index 1 mmio: [0xfbd00000-0xfbdfffff]
[ 0.314893] bus: 02 index 2 mmio: [0x0-0x0]
[ 0.315169] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.315442] bus: 03 index 0 io port: [0xd000-0xdfff]
[ 0.315717] bus: 03 index 1 mmio: [0xfbe00000-0xfbefffff]
[ 0.315995] bus: 03 index 2 mmio: [0x0-0x0]
[ 0.316269] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.316542] bus: 04 index 0 io port: [0xe000-0xefff]
[ 0.316817] bus: 04 index 1 mmio: [0xfbf00000-0xfbffffff]
[ 0.317095] bus: 04 index 2 mmio: [0x0-0x0]
[ 0.317369] bus: 04 index 3 io port: [0x00-0xffff]
[ 0.317643] bus: 04 index 4 mmio: [0x000000-0xffffffffffffffff]
[ 0.317927] NET: Registered protocol family 2
[ 0.328067] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.329365] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.331784] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.332315] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.332593] TCP reno registered
[ 0.335032] NET: Registered protocol family 1
[ 0.336624] microcode: collect_cpu_info_amd : patch_id=0x1000086
[ 0.336909] microcode: collect_cpu_info_amd : patch_id=0x1000086
[ 0.337201] microcode: collect_cpu_info_amd : patch_id=0x1000086
[ 0.337481] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.338062] alg: cipher: Test 1 failed on encryption for aes-asm
[ 0.338341] 00000000: 00 01 02 03 04 05 06 07 08 08 08 08 08 08 08 08
[ 0.338831] audit: initializing netlink socket (disabled)
[ 0.339123] type=2000 audit(1236241144.338:1): initialized
[ 0.344248] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.346384] VFS: Disk quotas dquot_6.5.1
[ 0.346708] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.347325] msgmni has been set to 7930
[ 0.348039] alg: No test for stdrng (krng)
[ 0.348408] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.348922] io scheduler noop registered
[ 0.349195] io scheduler anticipatory registered
[ 0.349469] io scheduler deadline registered
[ 0.349862] io scheduler cfq registered (default)
[ 0.480946] pci 0000:01:00.0: Boot video device
[ 0.485750] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 0.485766] pcieport-driver 0000:00:02.0: found MSI capability
[ 0.486057] pcieport-driver 0000:00:02.0: irq 2302 for MSI/MSI-X
[ 0.486063] pci_express 0000:00:02.0:pcie00: allocate port service
[ 0.486093] pci_express 0000:00:02.0:pcie03: allocate port service
[ 0.486138] pcieport-driver 0000:00:06.0: setting latency timer to 64
[ 0.486154] pcieport-driver 0000:00:06.0: found MSI capability
[ 0.486439] pcieport-driver 0000:00:06.0: irq 2301 for MSI/MSI-X
[ 0.486444] pci_express 0000:00:06.0:pcie00: allocate port service
[ 0.486475] pci_express 0000:00:06.0:pcie03: allocate port service
[ 0.486519] pcieport-driver 0000:00:07.0: setting latency timer to 64
[ 0.486534] pcieport-driver 0000:00:07.0: found MSI capability
[ 0.492666] pcieport-driver 0000:00:07.0: irq 2300 for MSI/MSI-X
[ 0.492671] pci_express 0000:00:07.0:pcie00: allocate port service
[ 0.492727] pci_express 0000:00:07.0:pcie03: allocate port service
[ 0.495127] Non-volatile memory driver v1.2
[ 0.495412] Linux agpgart interface v0.103
[ 0.495738] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
[ 0.496253] Hangcheck: Using get_cycles().
[ 0.496624] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.501922] ACPI: Power Button (FF) [PWRF]
[ 0.502286] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.504928] ACPI: Power Button (CM) [PWRB]
[ 0.505421] processor ACPI_CPU:00: registered as cooling_device0
[ 0.505700] ACPI: Processor [P001] (supports 8 throttling states)
[ 0.506118] processor ACPI_CPU:01: registered as cooling_device1
[ 0.506435] processor ACPI_CPU:02: registered as cooling_device2
[ 0.509493] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 0.568851] Switched to high resolution mode on CPU 1
[ 0.568909] Switched to high resolution mode on CPU 2
[ 0.568956] Switched to high resolution mode on CPU 0
[ 0.693188] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.693851] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.695224] brd: module loaded
[ 0.695499] Uniform Multi-Platform E-IDE driver
[ 0.695865] atiixp 0000:00:14.1: IDE controller (0x1002:0x439c rev 0x00)
[ 0.696154] pci 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.696445] atiixp 0000:00:14.1: not 100% native mode: will probe irqs later
[ 0.696725] ide0: BM-DMA at 0xff00-0xff07
[ 0.697012] ide1: BM-DMA at 0xff08-0xff0f
[ 0.697288] Probing IDE interface ide0...
[ 1.369337] hda: Pioneer DVD-ROM ATAPIModel DVD-105S 012, ATAPI CD/DVD-ROM drive
[ 1.675099] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 1.675212] hda: UDMA/33 mode selected
[ 1.675597] Probing IDE interface ide1...
[ 2.194106] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 2.196022] ide1 at 0x170-0x177,0x376 on irq 15
[ 2.196514] ide-gd driver 1.18
[ 2.196864] Loading iSCSI transport class v2.0-870.
[ 2.197313] Driver 'sd' needs updating - please use bus_type methods
[ 2.197615] Driver 'sr' needs updating - please use bus_type methods
[ 2.197924] ahci 0000:00:11.0: version 3.0
[ 2.197933] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 2.198294] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 2.198806] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 2.199535] scsi0 : ahci
[ 2.199916] scsi1 : ahci
[ 2.200269] scsi2 : ahci
[ 2.200616] scsi3 : ahci
[ 2.200983] ata1: SATA max UDMA/133 irq_stat 0x00400000, PHY RDY changed irq 22
[ 2.201503] ata2: SATA max UDMA/133 abar m1024@0xf3fffc00 port 0xf3fffd80 irq 22
[ 2.202018] ata3: SATA max UDMA/133 abar m1024@0xf3fffc00 port 0xf3fffe00 irq 22
[ 2.202532] ata4: SATA max UDMA/133 abar m1024@0xf3fffc00 port 0xf3fffe80 irq 22
[ 3.078033] ata1: softreset failed (device not ready)
[ 3.078318] ata1: failed due to HW bug, retry pmp=0
[ 3.231042] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.259972] ata1.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
[ 3.260263] ata1.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.302382] ata1.00: configured for UDMA/133
[ 3.618033] ata2: SATA link down (SStatus 0 SControl 300)
[ 3.934033] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.250034] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.261088] scsi 0:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
[ 4.261762] sd 0:0:0:0: [sda] 2930277168 512-byte hardware sectors: (1.50 TB/1.36 TiB)
[ 4.262286] sd 0:0:0:0: [sda] Write Protect is off
[ 4.262562] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.262574] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.263125] sd 0:0:0:0: [sda] 2930277168 512-byte hardware sectors: (1.50 TB/1.36 TiB)
[ 4.263648] sd 0:0:0:0: [sda] Write Protect is off
[ 4.263923] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.263935] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.264456] sda: sda1 sda2 sda3
[ 4.283947] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.284487] usbcore: registered new interface driver libusual
[ 4.284826] PNP: PS/2 Controller [PNP0303:PSKE,PNP0f03:PSMS] at 0x60,0x64 irq 1,12
[ 4.285662] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.285939] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.286270] mice: PS/2 mouse device common for all mice
[ 4.293440] rtc_cmos 00:05: RTC can wake from S4
[ 4.293756] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 4.294054] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 4.294369] EDAC MC: Ver: 2.1.0 Mar 3 2009
[ 4.294827] cpuidle: using governor ladder
[ 4.295104] cpuidle: using governor menu
[ 4.295382] No iBFT detected.
[ 4.296309] usbcore: registered new interface driver hiddev
[ 4.296612] usbcore: registered new interface driver usbhid
[ 4.296888] usbhid: v2.6:USB HID core driver
[ 4.297245] Netfilter messages via NETLINK v0.30.
[ 4.297529] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 4.297982] ctnetlink v0.93: registering with nfnetlink.
[ 4.298629] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.298920] TCP cubic registered
[ 4.299195] Initializing XFRM netlink socket
[ 4.299552] NET: Registered protocol family 10
[ 4.300264] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 4.300575] IPv6 over IPv4 tunneling driver
[ 4.301244] NET: Registered protocol family 17
[ 4.301529] NET: Registered protocol family 15
[ 4.301843] powernow-k8: Found 1 AMD Phenom(tm) II X3 720 Processor processors (3 cpu cores) (version 2.20.00)
[ 4.302373] [Firmware Bug]: powernow-k8: Your BIOS does not provide ACPI _PSS objects in a way that Linux understands. Please report this to the Linux ACPI maintainers and complain to your BIOS vendor.
[ 4.303152] [Firmware Bug]: powernow-k8: Your BIOS does not provide ACPI _PSS objects in a way that Linux understands. Please report this to the Linux ACPI maintainers and complain to your BIOS vendor.
[ 4.303932] [Firmware Bug]: powernow-k8: Your BIOS does not provide ACPI _PSS objects in a way that Linux understands. Please report this to the Linux ACPI maintainers and complain to your BIOS vendor.
[ 4.304843] registered taskstats version 1
[ 4.305204] Magic number: 1:473:320
[ 4.305488] tty tty45: hash matches
[ 4.305766] platform microcode: hash matches
[ 4.306041] misc microcode: hash matches
[ 4.408132] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 4.408413] EXT3-fs: write access will be enabled during recovery.
[ 8.589226] kjournald starting. Commit interval 5 seconds
[ 8.589234] EXT3-fs: recovery complete.
[ 8.597987] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.598282] VFS: Mounted root (ext3 filesystem) readonly.
[ 8.598570] Freeing unused kernel memory: 508k freed
[ 8.598952] Write protecting the kernel read-only data: 5252k
[ 8.738778] khelper used greatest stack depth: 5184 bytes left
[ 9.128556] init-early.sh used greatest stack depth: 3936 bytes left
[ 10.484134] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 10.492171] 8139too Fast Ethernet driver 0.9.28
[ 10.492200] 8139too 0000:04:05.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 10.493309] eth0: RealTek RTL8139 at 0xe800, 00:00:21:fe:11:67, IRQ 20
[ 10.493311] eth0: Identified 8139 chip type 'RTL-8139B'
[ 10.494496] ATL1E 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.494503] ATL1E 0000:02:00.0: setting latency timer to 64
[ 10.520142] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 10.746967] ohci1394 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 10.746974] ohci1394 0000:03:00.0: setting latency timer to 64
[ 10.758860] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.758862] ehci_hcd: block sizes: qh 160 qtd 96 itd 192 sitd 96
[ 10.758891] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 10.758917] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 10.758944] drivers/usb/core/inode.c: creating file 'devices'
[ 10.758947] drivers/usb/core/inode.c: creating file '001'
[ 10.758975] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 10.758981] ehci_hcd 0000:00:12.2: reset hcs_params 0x102306 dbg=1 cc=2 pcc=3 ordered !ppc ports=6
[ 10.758984] ehci_hcd 0000:00:12.2: reset hcc_params a072 thresh 7 uframes 256/512/1024
[ 10.759009] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
[ 10.759015] ehci_hcd 0000:00:12.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 10.759027] ehci_hcd 0000:00:12.2: debug port 1
[ 10.759032] ehci_hcd 0000:00:12.2: MWI active
[ 10.759033] ehci_hcd 0000:00:12.2: supports USB remote wakeup
[ 10.759044] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf3fff800
[ 10.759047] ehci_hcd 0000:00:12.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 10.759052] ehci_hcd 0000:00:12.2: init command 010009 (park)=0 ithresh=1 period=256 RUN
[ 10.765020] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 10.765039] usb usb1: default language 0x0409
[ 10.765068] usb usb1: uevent
[ 10.765077] usb usb1: usb_probe_device
[ 10.765079] usb usb1: configuration #1 chosen from 1 choice
[ 10.765083] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 10.765091] usb 1-0:1.0: uevent
[ 10.765098] hub 1-0:1.0: usb_probe_interface
[ 10.765099] hub 1-0:1.0: usb_probe_interface - got id
[ 10.765101] hub 1-0:1.0: USB hub found
[ 10.765105] hub 1-0:1.0: 6 ports detected
[ 10.765106] hub 1-0:1.0: standalone hub
[ 10.765107] hub 1-0:1.0: no power switching (usb 1.0)
[ 10.765108] hub 1-0:1.0: individual port over-current protection
[ 10.765110] hub 1-0:1.0: power on to power good time: 20ms
[ 10.765112] hub 1-0:1.0: local power source is good
[ 10.765114] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 10.765159] drivers/usb/core/inode.c: creating file '001'
[ 10.765180] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.765182] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.765183] usb usb1: Product: EHCI Host Controller
[ 10.765185] usb usb1: Manufacturer: Linux 2.6.28-gentoo-r2ATH64 ehci_hcd
[ 10.765186] usb usb1: SerialNumber: 0000:00:12.2
[ 10.765199] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 10.765214] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 10.765230] drivers/usb/core/inode.c: creating file '002'
[ 10.765246] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 10.765251] ehci_hcd 0000:00:13.2: reset hcs_params 0x102306 dbg=1 cc=2 pcc=3 ordered !ppc ports=6
[ 10.765254] ehci_hcd 0000:00:13.2: reset hcc_params a072 thresh 7 uframes 256/512/1024
[ 10.765268] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
[ 10.765274] ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 10.765286] ehci_hcd 0000:00:13.2: debug port 1
[ 10.765290] ehci_hcd 0000:00:13.2: MWI active
[ 10.765291] ehci_hcd 0000:00:13.2: supports USB remote wakeup
[ 10.765301] ehci_hcd 0000:00:13.2: irq 19, io mem 0xf3fff400
[ 10.765304] ehci_hcd 0000:00:13.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 10.765309] ehci_hcd 0000:00:13.2: init command 010009 (park)=0 ithresh=1 period=256 RUN
[ 10.765809] ACPI: WMI: Mapper loaded
[ 10.772022] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 10.772037] usb usb2: default language 0x0409
[ 10.772065] usb usb2: uevent
[ 10.772073] usb usb2: usb_probe_device
[ 10.772075] usb usb2: configuration #1 chosen from 1 choice
[ 10.772078] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 10.772086] usb 2-0:1.0: uevent
[ 10.772092] hub 2-0:1.0: usb_probe_interface
[ 10.772094] hub 2-0:1.0: usb_probe_interface - got id
[ 10.772095] hub 2-0:1.0: USB hub found
[ 10.772099] hub 2-0:1.0: 6 ports detected
[ 10.772100] hub 2-0:1.0: standalone hub
[ 10.772101] hub 2-0:1.0: no power switching (usb 1.0)
[ 10.772102] hub 2-0:1.0: individual port over-current protection
[ 10.772103] hub 2-0:1.0: power on to power good time: 20ms
[ 10.772106] hub 2-0:1.0: local power source is good
[ 10.772107] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 10.772149] drivers/usb/core/inode.c: creating file '001'
[ 10.772174] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.772176] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.772177] usb usb2: Product: EHCI Host Controller
[ 10.772178] usb usb2: Manufacturer: Linux 2.6.28-gentoo-r2ATH64 ehci_hcd
[ 10.772180] usb usb2: SerialNumber: 0000:00:13.2
[ 10.780447] Linux video capture interface: v2.00
[ 10.786080] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 10.786082] ohci_hcd: block sizes: ed 80 td 96
[ 10.786099] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.786117] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 10.786139] drivers/usb/core/inode.c: creating file '003'
[ 10.786158] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 10.786165] ohci_hcd 0000:00:12.0: enabled AMD ISO transfers quirk
[ 10.786178] ohci_hcd 0000:00:12.0: created debug files
[ 10.786179] ohci_hcd 0000:00:12.0: supports USB remote wakeup
[ 10.786189] ohci_hcd 0000:00:12.0: irq 16, io mem 0xf3ffd000
[ 10.800111] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fbeff800-fbefffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 10.832627] Linux video codec intermediate layer: v0.2
[ 10.840156] ohci_hcd 0000:00:12.0: OHCI controller state
[ 10.840160] ohci_hcd 0000:00:12.0: OHCI 1.0, NO legacy support registers
[ 10.840163] ohci_hcd 0000:00:12.0: control 0x083 HCFS=operational CBSR=3
[ 10.840166] ohci_hcd 0000:00:12.0: cmdstatus 0x00000 SOC=0
[ 10.840169] ohci_hcd 0000:00:12.0: intrstatus 0x00000004 SF
[ 10.840172] ohci_hcd 0000:00:12.0: intrenable 0x8000001a MIE UE RD WDH
[ 10.840181] ohci_hcd 0000:00:12.0: hcca frame #0005
[ 10.840185] ohci_hcd 0000:00:12.0: roothub.a 02001203 POTPGT=2 NOCP NPS NDP=3(3)
[ 10.840187] ohci_hcd 0000:00:12.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 10.840190] ohci_hcd 0000:00:12.0: roothub.status 00008000 DRWE
[ 10.840193] ohci_hcd 0000:00:12.0: roothub.portstatus [0] 0x00000100 PPS
[ 10.840196] ohci_hcd 0000:00:12.0: roothub.portstatus [1] 0x00000100 PPS
[ 10.840199] ohci_hcd 0000:00:12.0: roothub.portstatus [2] 0x00000100 PPS
[ 10.840210] usb usb3: default language 0x0409
[ 10.840240] usb usb3: uevent
[ 10.840254] usb usb3: usb_probe_device
[ 10.840256] usb usb3: configuration #1 chosen from 1 choice
[ 10.840260] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 10.840272] usb 3-0:1.0: uevent
[ 10.840279] hub 3-0:1.0: usb_probe_interface
[ 10.840280] hub 3-0:1.0: usb_probe_interface - got id
[ 10.840281] hub 3-0:1.0: USB hub found
[ 10.840289] hub 3-0:1.0: 3 ports detected
[ 10.840290] hub 3-0:1.0: standalone hub
[ 10.840291] hub 3-0:1.0: no power switching (usb 1.0)
[ 10.840292] hub 3-0:1.0: no over-current protection
[ 10.840293] hub 3-0:1.0: power on to power good time: 4ms
[ 10.840297] hub 3-0:1.0: local power source is good
[ 10.840298] hub 3-0:1.0: trying to enable port power on non-switchable hub
[ 10.840321] drivers/usb/core/inode.c: creating file '001'
[ 10.840343] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.840345] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.840347] usb usb3: Product: OHCI Host Controller
[ 10.840348] usb usb3: Manufacturer: Linux 2.6.28-gentoo-r2ATH64 ohci_hcd
[ 10.840349] usb usb3: SerialNumber: 0000:00:12.0
[ 10.840369] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.840387] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 10.840404] drivers/usb/core/inode.c: creating file '004'
[ 10.840421] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
[ 10.840426] ohci_hcd 0000:00:12.1: enabled AMD ISO transfers quirk
[ 10.840436] ohci_hcd 0000:00:12.1: created debug files
[ 10.840437] ohci_hcd 0000:00:12.1: supports USB remote wakeup
[ 10.840441] ohci_hcd 0000:00:12.1: irq 16, io mem 0xf3ffe000
[ 10.864033] ehci_hcd 0000:00:12.2: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT
[ 10.864037] hub 1-0:1.0: port 1: status 0501 change 0001
[ 10.864044] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001403 POWER sig=k CSC CONNECT
[ 10.864046] hub 1-0:1.0: port 2: status 0501 change 0001
[ 10.871054] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
[ 10.895033] ohci_hcd 0000:00:12.1: OHCI controller state
[ 10.895037] ohci_hcd 0000:00:12.1: OHCI 1.0, NO legacy support registers
[ 10.895040] ohci_hcd 0000:00:12.1: control 0x083 HCFS=operational CBSR=3
[ 10.895043] ohci_hcd 0000:00:12.1: cmdstatus 0x00000 SOC=0
[ 10.895046] ohci_hcd 0000:00:12.1: intrstatus 0x00000004 SF
[ 10.895049] ohci_hcd 0000:00:12.1: intrenable 0x8000001a MIE UE RD WDH
[ 10.895058] ohci_hcd 0000:00:12.1: hcca frame #0005
[ 10.895061] ohci_hcd 0000:00:12.1: roothub.a 02001203 POTPGT=2 NOCP NPS NDP=3(3)
[ 10.895064] ohci_hcd 0000:00:12.1: roothub.b 00000000 PPCM=0000 DR=0000
[ 10.895067] ohci_hcd 0000:00:12.1: roothub.status 00008000 DRWE
[ 10.895070] ohci_hcd 0000:00:12.1: roothub.portstatus [0] 0x00000100 PPS
[ 10.895073] ohci_hcd 0000:00:12.1: roothub.portstatus [1] 0x00000100 PPS
[ 10.895075] ohci_hcd 0000:00:12.1: roothub.portstatus [2] 0x00000100 PPS
[ 10.895085] usb usb4: default language 0x0409
[ 10.895116] usb usb4: uevent
[ 10.895129] usb usb4: usb_probe_device
[ 10.895131] usb usb4: configuration #1 chosen from 1 choice
[ 10.895135] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 10.895146] usb 4-0:1.0: uevent
[ 10.895153] hub 4-0:1.0: usb_probe_interface
[ 10.895154] hub 4-0:1.0: usb_probe_interface - got id
[ 10.895155] hub 4-0:1.0: USB hub found
[ 10.895163] hub 4-0:1.0: 3 ports detected
[ 10.895164] hub 4-0:1.0: standalone hub
[ 10.895165] hub 4-0:1.0: no power switching (usb 1.0)
[ 10.895166] hub 4-0:1.0: no over-current protection
[ 10.895167] hub 4-0:1.0: power on to power good time: 4ms
[ 10.895171] hub 4-0:1.0: local power source is good
[ 10.895172] hub 4-0:1.0: trying to enable port power on non-switchable hub
[ 10.895195] drivers/usb/core/inode.c: creating file '001'
[ 10.895219] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.895221] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.895223] usb usb4: Product: OHCI Host Controller
[ 10.895224] usb usb4: Manufacturer: Linux 2.6.28-gentoo-r2ATH64 ohci_hcd
[ 10.895225] usb usb4: SerialNumber: 0000:00:12.1
[ 10.895247] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.895271] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 10.895287] drivers/usb/core/inode.c: creating file '005'
[ 10.895306] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 10.895310] ohci_hcd 0000:00:13.0: enabled AMD ISO transfers quirk
[ 10.895322] ohci_hcd 0000:00:13.0: created debug files
[ 10.895323] ohci_hcd 0000:00:13.0: supports USB remote wakeup
[ 10.895334] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf3ffb000
[ 10.940037] hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0000
[ 10.950034] ohci_hcd 0000:00:13.0: OHCI controller state
[ 10.950039] ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers
[ 10.950042] ohci_hcd 0000:00:13.0: control 0x083 HCFS=operational CBSR=3
[ 10.950045] ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
[ 10.950048] ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF
[ 10.950051] ohci_hcd 0000:00:13.0: intrenable 0x8000001a MIE UE RD WDH
[ 10.950060] ohci_hcd 0000:00:13.0: hcca frame #0005
[ 10.950064] ohci_hcd 0000:00:13.0: roothub.a 02001203 POTPGT=2 NOCP NPS NDP=3(3)
[ 10.950067] ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
[ 10.950069] ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
[ 10.950073] ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS
[ 10.950075] ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS
[ 10.950078] ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS
[ 10.950094] usb usb5: default language 0x0409
[ 10.950155] usb usb5: uevent
[ 10.950169] usb usb5: usb_probe_device
[ 10.950171] usb usb5: configuration #1 chosen from 1 choice
[ 10.950178] usb usb5: adding 5-0:1.0 (config #1, interface 0)
[ 10.950187] usb 5-0:1.0: uevent
[ 10.950195] hub 5-0:1.0: usb_probe_interface
[ 10.950197] hub 5-0:1.0: usb_probe_interface - got id
[ 10.950198] hub 5-0:1.0: USB hub found
[ 10.950208] hub 5-0:1.0: 3 ports detected
[ 10.950209] hub 5-0:1.0: standalone hub
[ 10.950210] hub 5-0:1.0: no power switching (usb 1.0)
[ 10.950211] hub 5-0:1.0: no over-current protection
[ 10.950212] hub 5-0:1.0: power on to power good time: 4ms
[ 10.950217] hub 5-0:1.0: local power source is good
[ 10.950219] hub 5-0:1.0: trying to enable port power on non-switchable hub
[ 10.950248] drivers/usb/core/inode.c: creating file '001'
[ 10.950277] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.950279] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.950281] usb usb5: Product: OHCI Host Controller
[ 10.950282] usb usb5: Manufacturer: Linux 2.6.28-gentoo-r2ATH64 ohci_hcd
[ 10.950284] usb usb5: SerialNumber: 0000:00:13.0
[ 10.950313] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 10.950335] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 10.950351] drivers/usb/core/inode.c: creating file '006'
[ 10.950373] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
[ 10.950378] ohci_hcd 0000:00:13.1: enabled AMD ISO transfers quirk
[ 10.950392] ohci_hcd 0000:00:13.1: created debug files
[ 10.950393] ohci_hcd 0000:00:13.1: supports USB remote wakeup
[ 10.950399] ohci_hcd 0000:00:13.1: irq 18, io mem 0xf3ffc000
[ 10.957576] nvidia: module license 'NVIDIA' taints kernel.
[ 10.965030] hub 1-0:1.0: state 7 ports 6 chg 0006 evt 0000
[ 10.965039] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 10.965045] ehci_hcd 0000:00:12.2: port 1 low speed --> companion
[ 11.005309] ohci_hcd 0000:00:13.1: OHCI controller state
[ 11.005312] ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers
[ 11.005316] ohci_hcd 0000:00:13.1: control 0x083 HCFS=operational CBSR=3
[ 11.005319] ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0
[ 11.005322] ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF
[ 11.005325] ohci_hcd 0000:00:13.1: intrenable 0x8000001a MIE UE RD WDH
[ 11.005334] ohci_hcd 0000:00:13.1: hcca frame #0005
[ 11.005337] ohci_hcd 0000:00:13.1: roothub.a 02001203 POTPGT=2 NOCP NPS NDP=3(3)
[ 11.005340] ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000
[ 11.005343] ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE
[ 11.005346] ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00000100 PPS
[ 11.005348] ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS
[ 11.005351] ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00000100 PPS
[ 11.005362] usb usb6: default language 0x0409
[ 11.005403] usb usb6: uevent
[ 11.005413] usb usb6: usb_probe_device
[ 11.005415] usb usb6: configuration #1 chosen from 1 choice
[ 11.005419] usb usb6: adding 6-0:1.0 (config #1, interface 0)
[ 11.005427] usb 6-0:1.0: uevent
[ 11.005435] hub 6-0:1.0: usb_probe_interface
[ 11.005436] hub 6-0:1.0: usb_probe_interface - got id
[ 11.005438] hub 6-0:1.0: USB hub found
[ 11.005446] hub 6-0:1.0: 3 ports detected
[ 11.005447] hub 6-0:1.0: standalone hub
[ 11.005448] hub 6-0:1.0: no power switching (usb 1.0)
[ 11.005449] hub 6-0:1.0: no over-current protection
[ 11.005450] hub 6-0:1.0: power on to power good time: 4ms
[ 11.005454] hub 6-0:1.0: local power source is good
[ 11.005455] hub 6-0:1.0: trying to enable port power on non-switchable hub
[ 11.005482] drivers/usb/core/inode.c: creating file '001'
[ 11.005506] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 11.005508] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.005510] usb usb6: Product: OHCI Host Controller
[ 11.005511] usb usb6: Manufacturer: Linux 2.6.28-gentoo-r2ATH64 ohci_hcd
[ 11.005512] usb usb6: SerialNumber: 0000:00:13.1
[ 11.005538] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 11.005598] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 11.005615] drivers/usb/core/inode.c: creating file '007'
[ 11.005635] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
[ 11.005639] ohci_hcd 0000:00:14.5: enabled AMD ISO transfers quirk
[ 11.005650] ohci_hcd 0000:00:14.5: created debug files
[ 11.005652] ohci_hcd 0000:00:14.5: supports USB remote wakeup
[ 11.005656] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf3ffa000
[ 11.016027] ehci_hcd 0000:00:12.2: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC
[ 11.016046] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s
[ 11.016050] ehci_hcd 0000:00:12.2: port 2 low speed --> companion
[ 11.053055] Zoran MJPEG board driver version 0.9.5
[ 11.053076] pci 0000:04:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 11.053080] MJPEG[0]: Zoran ZR36067 (rev 2) irq: 21, memory: 0xfbffe000
[ 11.053081] MJPEG[0]: subsystem vendor=0x1031 id=0x7efe
[ 11.060287] ohci_hcd 0000:00:14.5: OHCI controller state
[ 11.060290] ohci_hcd 0000:00:14.5: OHCI 1.0, NO legacy support registers
[ 11.060293] ohci_hcd 0000:00:14.5: control 0x083 HCFS=operational CBSR=3
[ 11.060296] ohci_hcd 0000:00:14.5: cmdstatus 0x00000 SOC=0
[ 11.060299] ohci_hcd 0000:00:14.5: intrstatus 0x00000004 SF
[ 11.060302] ohci_hcd 0000:00:14.5: intrenable 0x8000001a MIE UE RD WDH
[ 11.060311] ohci_hcd 0000:00:14.5: hcca frame #0005
[ 11.060314] ohci_hcd 0000:00:14.5: roothub.a 02001202 POTPGT=2 NOCP NPS NDP=2(2)
[ 11.060317] ohci_hcd 0000:00:14.5: roothub.b 00000000 PPCM=0000 DR=0000
[ 11.060320] ohci_hcd 0000:00:14.5: roothub.status 00008000 DRWE
[ 11.060323] ohci_hcd 0000:00:14.5: roothub.portstatus [0] 0x00000100 PPS
[ 11.060325] ohci_hcd 0000:00:14.5: roothub.portstatus [1] 0x00000100 PPS
[ 11.060336] usb usb7: default language 0x0409
[ 11.060364] usb usb7: uevent
[ 11.060373] usb usb7: usb_probe_device
[ 11.060375] usb usb7: configuration #1 chosen from 1 choice
[ 11.060378] usb usb7: adding 7-0:1.0 (config #1, interface 0)
[ 11.060388] usb 7-0:1.0: uevent
[ 11.060394] hub 7-0:1.0: usb_probe_interface
[ 11.060396] hub 7-0:1.0: usb_probe_interface - got id
[ 11.060397] hub 7-0:1.0: USB hub found
[ 11.060405] hub 7-0:1.0: 2 ports detected
[ 11.060406] hub 7-0:1.0: standalone hub
[ 11.060407] hub 7-0:1.0: no power switching (usb 1.0)
[ 11.060408] hub 7-0:1.0: no over-current protection
[ 11.060409] hub 7-0:1.0: power on to power good time: 4ms
[ 11.060413] hub 7-0:1.0: local power source is good
[ 11.060414] hub 7-0:1.0: trying to enable port power on non-switchable hub
[ 11.060436] drivers/usb/core/inode.c: creating file '001'
[ 11.060458] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 11.060460] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.060461] usb usb7: Product: OHCI Host Controller
[ 11.060462] usb usb7: Manufacturer: Linux 2.6.28-gentoo-r2ATH64 ohci_hcd
[ 11.060464] usb usb7: SerialNumber: 0000:00:14.5
[ 11.067026] ehci_hcd 0000:00:12.2: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC
[ 11.067044] hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0002
[ 11.067050] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS
[ 11.067053] hub 3-0:1.0: port 1, status 0301, change 0001, 1.5 Mb/s
[ 11.132871] saa7110' 0-004e: chip found @ 0x9c (DC10plus[0])
[ 11.154601] adv7175' 0-002b: chip found @ 0x56 (DC10plus[0])
[ 11.171026] hub 3-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x301
[ 11.192050] ohci_hcd 0000:00:12.0: port[0] reset timeout, stat 00000311
[ 11.205680] ZORAN: 1 card(s) found
[ 11.205682] DC10plus[0]: zr36057_init() - initializing card[0], zr=ffff88011f878000
[ 11.212047] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 11.212053] nvidia 0000:01:00.0: setting latency timer to 64
[ 11.212173] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 180.29 Wed Feb 4 23:39:47 PST 2009
[ 11.213425] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.242033] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
[ 11.293031] usb 3-1: new low speed USB device using ohci_hcd and address 2
[ 11.315052] ohci_hcd 0000:00:12.0: port[0] reset timeout, stat 00000313
[ 11.365269] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
[ 11.436170] usb 3-1: skipped 1 descriptor after interface
[ 11.436173] usb 3-1: skipped 1 descriptor after interface
[ 11.438169] usb 3-1: default language 0x0409
[ 11.443202] usb 3-1: uevent
[ 11.443331] usb 3-1: usb_probe_device
[ 11.443333] usb 3-1: configuration #1 chosen from 1 choice
[ 11.445168] usb 3-1: adding 3-1:1.0 (config #1, interface 0)
[ 11.445183] usb 3-1:1.0: uevent
[ 11.445307] usbhid 3-1:1.0: usb_probe_interface
[ 11.445309] usbhid 3-1:1.0: usb_probe_interface - got id
[ 11.451419] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input3
[ 11.458505] generic-usb 0003:046D:C316.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:12.0-1/input0
[ 11.459033] usb 3-1: adding 3-1:1.1 (config #1, interface 1)
[ 11.459046] usb 3-1:1.1: uevent
[ 11.459056] usbhid 3-1:1.1: usb_probe_interface
[ 11.459057] usbhid 3-1:1.1: usb_probe_interface - got id
[ 11.469218] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/input/input4
[ 11.475299] generic-usb 0003:046D:C316.0002: input,hidraw1: USB HID v1.10 Device [Logitech Logitech USB Keyboard] on usb-0000:00:12.0-1/input1
[ 11.475324] drivers/usb/core/inode.c: creating file '002'
[ 11.475350] usb 3-1: New USB device found, idVendor=046d, idProduct=c316
[ 11.475351] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 11.475353] usb 3-1: Product: Logitech USB Keyboard
[ 11.475354] usb 3-1: Manufacturer: Logitech
[ 11.475359] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [1] = 0x00010301 CSC LSDA PPS CCS
[ 11.475362] hub 3-0:1.0: port 2, status 0301, change 0001, 1.5 Mb/s
[ 11.579020] hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x301
[ 11.600044] ohci_hcd 0000:00:12.0: port[1] reset timeout, stat 00000311
[ 11.650021] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
[ 11.701019] usb 3-2: new low speed USB device using ohci_hcd and address 3
[ 11.723043] ohci_hcd 0000:00:12.0: port[1] reset timeout, stat 00000313
[ 11.773021] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
[ 11.843161] usb 3-2: skipped 1 descriptor after interface
[ 11.845160] usb 3-2: default language 0x0409
[ 11.850191] usb 3-2: uevent
[ 11.850315] usb 3-2: usb_probe_device
[ 11.850317] usb 3-2: configuration #1 chosen from 1 choice
[ 11.852158] usb 3-2: adding 3-2:1.0 (config #1, interface 0)
[ 11.852173] usb 3-2:1.0: uevent
[ 11.852298] usbhid 3-2:1.0: usb_probe_interface
[ 11.852300] usbhid 3-2:1.0: usb_probe_interface - got id
[ 11.858402] input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input5
[ 11.865303] generic-usb 0003:046D:C025.0003: input,hidraw2: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:12.0-2/input0
[ 11.865330] drivers/usb/core/inode.c: creating file '003'
[ 11.865357] usb 3-2: New USB device found, idVendor=046d, idProduct=c025
[ 11.865359] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 11.865360] usb 3-2: Product: USB-PS/2 Optical Mouse
[ 11.865361] usb 3-2: Manufacturer: B16_b_02
[ 11.865364] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0004
[ 11.865371] hub 6-0:1.0: state 7 ports 3 chg 0000 evt 0000
[ 11.865373] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 11.865376] hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0004
[ 11.865379] hub 4-0:1.0: state 7 ports 3 chg 0000 evt 0000
[ 11.865382] hub 5-0:1.0: state 7 ports 3 chg 0000 evt 0000
[ 11.954035] ohci_hcd 0000:00:12.1: auto-stop root hub
[ 11.954055] ohci_hcd 0000:00:13.0: auto-stop root hub
[ 12.063090] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0001c1c3e1]
[ 12.204023] ohci_hcd 0000:00:13.1: auto-stop root hub
[ 12.204036] ohci_hcd 0000:00:14.5: auto-stop root hub
[ 12.871018] hub 2-0:1.0: hub_suspend
[ 12.871024] usb usb2: bus auto-suspend
[ 12.871026] ehci_hcd 0000:00:13.2: suspend root hub
[ 13.070089] EXT3 FS on sda1, internal journal
[ 13.154797] kjournald starting. Commit interval 5 seconds
[ 13.155187] EXT3 FS on sda3, internal journal
[ 13.155189] EXT3-fs: recovery complete.
[ 13.155192] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.865019] hub 1-0:1.0: hub_suspend
[ 13.865025] usb usb1: bus auto-suspend
[ 13.865027] ehci_hcd 0000:00:12.2: suspend root hub
[ 13.865587] hub 6-0:1.0: hub_suspend
[ 13.865589] usb usb6: bus auto-suspend
[ 13.865593] ohci_hcd 0000:00:13.1: suspend root hub
[ 13.865597] hub 7-0:1.0: hub_suspend
[ 13.865599] usb usb7: bus auto-suspend
[ 13.865601] ohci_hcd 0000:00:14.5: suspend root hub
[ 13.865605] hub 4-0:1.0: hub_suspend
[ 13.865607] usb usb4: bus auto-suspend
[ 13.865610] ohci_hcd 0000:00:12.1: suspend root hub
[ 13.865614] hub 5-0:1.0: hub_suspend
[ 13.865615] usb usb5: bus auto-suspend
[ 13.865618] ohci_hcd 0000:00:13.0: suspend root hub
[ 13.975612] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 18.868189] Adding 3911816k swap on /dev/sda2. Priority:-1 extents:1 across:3911816k
[ 19.610818] usb usb3: uevent
[ 19.610851] usb 3-0:1.0: uevent
[ 19.610904] usb 3-1: uevent
[ 19.610936] usb 3-1:1.0: uevent
[ 19.611100] usb 3-1:1.1: uevent
[ 19.611299] usb 3-2: uevent
[ 19.611331] usb 3-2:1.0: uevent
[ 19.611642] usb usb4: uevent
[ 19.611673] usb 4-0:1.0: uevent
[ 19.611811] usb usb1: uevent
[ 19.611841] usb 1-0:1.0: uevent
[ 19.611976] usb usb5: uevent
[ 19.612008] usb 5-0:1.0: uevent
[ 19.612142] usb usb6: uevent
[ 19.612172] usb 6-0:1.0: uevent
[ 19.612321] usb usb2: uevent
[ 19.612352] usb 2-0:1.0: uevent
[ 19.612872] usb usb7: uevent
[ 19.612903] usb 7-0:1.0: uevent
[ 21.232856] RPC: Registered udp transport module.
[ 21.232857] RPC: Registered tcp transport module.
[ 21.280055] mount.nfs used greatest stack depth: 3736 bytes left
[ 24.302039] eth0: no IPv6 routers present
[ 77.113906] DC10plus[0]: zoran_open(mplayer, pid=[2255]), users(-)=0
[ 77.196939] DC10plus[0]: setup_window() - frame buffer has to be set first
[ 77.198484] DC10plus[0]: zoran_close(mplayer, pid=[2255]), users(+)=1
[ 93.068035] DC10plus[0]: zoran_open(mplayer, pid=[2256]), users(-)=0
[ 93.139111] DC10plus[0]: v4l_set_format() - video buffer size (128 kB) is too small
[ 93.139137] DC10plus[0]: zoran_close(mplayer, pid=[2256]), users(+)=1
[ 102.268297] DC10plus[0]: zoran_open(mplayer, pid=[2257]), users(-)=0
[ 102.339104] DC10plus[0]: v4l_set_format() - video buffer size (128 kB) is too small
[ 102.339129] DC10plus[0]: zoran_close(mplayer, pid=[2257]), users(+)=1
[ 107.091192] DC10plus[0]: zoran_open(mplayer, pid=[2258]), users(-)=0
[ 107.164659] DC10plus[0]: setup_window() - frame buffer has to be set first
[ 107.164763] DC10plus[0]: zoran_close(mplayer, pid=[2258]), users(+)=1
[ 120.779242] DC10plus[0]: zoran_open(mplayer, pid=[2259]), users(-)=0
[ 120.852687] DC10plus[0]: setup_window() - frame buffer has to be set first
[ 151.414445] DC10plus[0]: zoran_close(mplayer, pid=[2259]), users(+)=1
[ 157.003380] DC10plus[0]: zoran_open(mplayer, pid=[2261]), users(-)=0
[ 157.074112] DC10plus[0]: v4l_set_format() - video buffer size (128 kB) is too small
[ 157.074138] DC10plus[0]: zoran_close(mplayer, pid=[2261]), users(+)=1
[ 162.866528] DC10plus[0]: zoran_open(mplayer, pid=[2262]), users(-)=0
[ 162.938134] DC10plus[0]: v4l_set_format() - video buffer size (128 kB) is too small
[ 162.938166] DC10plus[0]: zoran_close(mplayer, pid=[2262]), users(+)=1
[ 166.299321] DC10plus[0]: zoran_open(mplayer, pid=[2263]), users(-)=0
[ 166.370105] DC10plus[0]: v4l_set_format() - video buffer size (128 kB) is too small
[ 166.370130] DC10plus[0]: zoran_close(mplayer, pid=[2263]), users(+)=1
[ 710.974015] pci 0000:04:06.0: PCI INT A disabled
[ 720.048293] Zoran MJPEG board driver version 0.9.5
[ 720.048313] pci 0000:04:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[ 720.048317] MJPEG[0]: Zoran ZR36067 (rev 2) irq: 21, memory: 0xfbffe000
[ 720.048319] MJPEG[0]: subsystem vendor=0x1031 id=0x7efe
[ 720.050410] DC10plus[0]: Initializing i2c bus...
[ 720.052307] saa7110' 0-004e: chip found @ 0x9c (DC10plus[0])
[ 720.069419] DC10plus[0]: i2c_client_register() - driver id = 22
[ 720.073817] adv7175' 0-002b: chip found @ 0x56 (DC10plus[0])
[ 720.080285] DC10plus[0]: i2c_client_register() - driver id = 48
[ 720.080287] DC10plus[0]: Initializing videocodec bus...
[ 720.088544] ZORAN: 1 card(s) found
[ 720.088546] DC10plus[0]: zr36057_init() - initializing card[0], zr=ffff88011f878000
[ 720.156885] DC10plus[0]: enable_jpg(IDLE)
[ 721.156018] DC10plus[0]: interrupts received: GIRQ1:50 queue_state=0/0/0/0
[ 721.159370] DC10plus[0]: procfs entry /proc/zoran0 allocated. data=ffff88011f878000
[ 1034.727084] bzip2 used greatest stack depth: 3536 bytes left
[-- Attachment #3: desktopX3_dmesg2009-03-05.txt.sig --]
[-- Type: application/octet-stream, Size: 72 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: CPI message on bootup for kernel .. CPU AMD Phenom II X3 (ACPI _PSS objects)
2009-03-05 12:32 CPI message on bootup for kernel .. CPU AMD Phenom II X3 (ACPI _PSS objects) Thomas Raschbacher
@ 2009-03-06 1:04 ` yakui_zhao
0 siblings, 0 replies; 2+ messages in thread
From: yakui_zhao @ 2009-03-06 1:04 UTC (permalink / raw)
To: Thomas Raschbacher; +Cc: linux-acpi@vger.kernel.org
On Thu, 2009-03-05 at 20:32 +0800, Thomas Raschbacher wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Hi.
>
> I got a message about ACPI _PSS objects on bootup and that I should =
> contact
> the ACPI Maintainers.. So I'm doing this now.
> dmesg as attachment ..
> I got an ASUS M4A78T-E mainboard and an AMD Phenom II X3 cpu (AM3 socket)
>
> If u need more info please let me know.
thanks for the info.
On some boxes based on AMD chipset there is no _PSS object, which
causes that power-k8 cpufreq driver can't be loaded correctly.
This issue had better be fixed by BIOS upgrading.
Thanks.
>
> Regards
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v2.0.9 (GNU/Linux)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
>
> iEYEARECAAYFAkmvxcIACgkQv20tKfoYgelJzQCdHLTQhH72ECvANp7+eaU2A9xF
> dFoAnRTDoyO//juDlOpVFRt3QdoqHB6B
> =38I0
> -----END PGP SIGNATURE-----
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2009-03-06 1:03 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-03-05 12:32 CPI message on bootup for kernel .. CPU AMD Phenom II X3 (ACPI _PSS objects) Thomas Raschbacher
2009-03-06 1:04 ` yakui_zhao
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).