From: Zhang Rui <rui.zhang@intel.com>
To: "Brown, Len" <lenb@kernel.org>
Cc: "linux-acpi@vger.kernel.org" <linux-acpi@vger.kernel.org>
Subject: Re: [PATCH 3/4 V2] ACPI: introduce drivers/acpi/debugfs.c
Date: Sun, 13 Jun 2010 10:39:23 +0800 [thread overview]
Message-ID: <1276396763.19052.18982.camel@rzhang1-desktop> (raw)
In-Reply-To: <1276328777.19052.17844.camel@rzhang1-desktop>
On Sat, 2010-06-12 at 15:46 +0800, Zhang, Rui wrote:
> Introduce drivers/acpi/debugfs.c.
>
> Code for ACPI debugfs I/F, i.e. /sys/kernel/debug/acpi/custom_method,
> is moved to this file.
>
> And make ACPI debugfs always built in,
> even if CONFIG_ACPI_DEBUG is cleared.
>
forgot to mention, this adds about 400bytes code to ACPI, when
CONFIG_ACPI_DEBUG is cleared.
> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
> ---
> drivers/acpi/Makefile | 2
> drivers/acpi/bus.c | 2
> drivers/acpi/debug.c | 97 ------------------------------------------------
> drivers/acpi/debugfs.c | 84 +++++++++++++++++++++++++++++++++++++++++
> drivers/acpi/internal.h | 6 +-
> 5 files changed, 89 insertions(+), 102 deletions(-)
>
> Index: linux-2.6/drivers/acpi/debug.c
> ===================================================================
> --- linux-2.6.orig/drivers/acpi/debug.c
> +++ /dev/null
> @@ -1,97 +0,0 @@
> -/*
> - * debug.c - ACPI debug interface to userspace.
> - */
> -
> -#include <linux/proc_fs.h>
> -#include <linux/seq_file.h>
> -#include <linux/init.h>
> -#include <linux/module.h>
> -#include <linux/kernel.h>
> -#include <linux/moduleparam.h>
> -#include <linux/debugfs.h>
> -#include <linux/slab.h>
> -#include <asm/uaccess.h>
> -#include <acpi/acpi_drivers.h>
> -
> -#define _COMPONENT ACPI_SYSTEM_COMPONENT
> -ACPI_MODULE_NAME("debug");
> -
> -/* --------------------------------------------------------------------------
> - DebugFS Interface
> - -------------------------------------------------------------------------- */
> -
> -static ssize_t cm_write(struct file *file, const char __user *user_buf,
> - size_t count, loff_t *ppos)
> -{
> - static char *buf;
> - static int uncopied_bytes;
> - struct acpi_table_header table;
> - acpi_status status;
> -
> - if (!(*ppos)) {
> - /* parse the table header to get the table length */
> - if (count <= sizeof(struct acpi_table_header))
> - return -EINVAL;
> - if (copy_from_user(&table, user_buf,
> - sizeof(struct acpi_table_header)))
> - return -EFAULT;
> - uncopied_bytes = table.length;
> - buf = kzalloc(uncopied_bytes, GFP_KERNEL);
> - if (!buf)
> - return -ENOMEM;
> - }
> -
> - if (uncopied_bytes < count) {
> - kfree(buf);
> - return -EINVAL;
> - }
> -
> - if (copy_from_user(buf + (*ppos), user_buf, count)) {
> - kfree(buf);
> - return -EFAULT;
> - }
> -
> - uncopied_bytes -= count;
> - *ppos += count;
> -
> - if (!uncopied_bytes) {
> - status = acpi_install_method(buf);
> - kfree(buf);
> - if (ACPI_FAILURE(status))
> - return -EINVAL;
> - add_taint(TAINT_OVERRIDDEN_ACPI_TABLE);
> - }
> -
> - return count;
> -}
> -
> -static const struct file_operations cm_fops = {
> - .write = cm_write,
> -};
> -
> -static int acpi_debugfs_init(void)
> -{
> - struct dentry *acpi_dir, *cm_dentry;
> -
> - acpi_dir = debugfs_create_dir("acpi", NULL);
> - if (!acpi_dir)
> - goto err;
> -
> - cm_dentry = debugfs_create_file("custom_method", S_IWUGO,
> - acpi_dir, NULL, &cm_fops);
> - if (!cm_dentry)
> - goto err;
> -
> - return 0;
> -
> -err:
> - if (acpi_dir)
> - debugfs_remove(acpi_dir);
> - return -EINVAL;
> -}
> -
> -int __init acpi_debug_init(void)
> -{
> - acpi_debugfs_init();
> - return 0;
> -}
> Index: linux-2.6/drivers/acpi/debugfs.c
> ===================================================================
> --- /dev/null
> +++ linux-2.6/drivers/acpi/debugfs.c
> @@ -0,0 +1,84 @@
> +/*
> + * debugfs.c - ACPI debugfs interface to userspace.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/debugfs.h>
> +#include <acpi/acpi_drivers.h>
> +
> +#define _COMPONENT ACPI_SYSTEM_COMPONENT
> +ACPI_MODULE_NAME("debugfs");
> +
> +/* --------------------------------------------------------------------------
> + DebugFS Interface
> + -------------------------------------------------------------------------- */
> +
> +static ssize_t cm_write(struct file *file, const char __user *user_buf,
> + size_t count, loff_t *ppos)
> +{
> + static char *buf;
> + static int uncopied_bytes;
> + struct acpi_table_header table;
> + acpi_status status;
> +
> + if (!(*ppos)) {
> + /* parse the table header to get the table length */
> + if (count <= sizeof(struct acpi_table_header))
> + return -EINVAL;
> + if (copy_from_user(&table, user_buf,
> + sizeof(struct acpi_table_header)))
> + return -EFAULT;
> + uncopied_bytes = table.length;
> + buf = kzalloc(uncopied_bytes, GFP_KERNEL);
> + if (!buf)
> + return -ENOMEM;
> + }
> +
> + if (uncopied_bytes < count) {
> + kfree(buf);
> + return -EINVAL;
> + }
> +
> + if (copy_from_user(buf + (*ppos), user_buf, count)) {
> + kfree(buf);
> + return -EFAULT;
> + }
> +
> + uncopied_bytes -= count;
> + *ppos += count;
> +
> + if (!uncopied_bytes) {
> + status = acpi_install_method(buf);
> + kfree(buf);
> + if (ACPI_FAILURE(status))
> + return -EINVAL;
> + add_taint(TAINT_OVERRIDDEN_ACPI_TABLE);
> + }
> +
> + return count;
> +}
> +
> +static const struct file_operations cm_fops = {
> + .write = cm_write,
> +};
> +
> +int __init acpi_debugfs_init(void)
> +{
> + struct dentry *acpi_dir, *cm_dentry;
> +
> + acpi_dir = debugfs_create_dir("acpi", NULL);
> + if (!acpi_dir)
> + goto err;
> +
> + cm_dentry = debugfs_create_file("custom_method", S_IWUGO,
> + acpi_dir, NULL, &cm_fops);
> + if (!cm_dentry)
> + goto err;
> +
> + return 0;
> +
> +err:
> + if (acpi_dir)
> + debugfs_remove(acpi_dir);
> + return -EINVAL;
> +}
> Index: linux-2.6/drivers/acpi/Makefile
> ===================================================================
> --- linux-2.6.orig/drivers/acpi/Makefile
> +++ linux-2.6/drivers/acpi/Makefile
> @@ -39,7 +39,7 @@ acpi-y += pci_root.o pci_link.o pci_i
> acpi-y += power.o
> acpi-y += event.o
> acpi-y += sysfs.o
> -acpi-$(CONFIG_ACPI_DEBUG) += debug.o
> +acpi-$(CONFIG_DEBUG_FS) += debugfs.o
> acpi-$(CONFIG_ACPI_NUMA) += numa.o
> acpi-$(CONFIG_ACPI_PROCFS_POWER) += cm_sbs.o
> ifdef CONFIG_ACPI_VIDEO
> Index: linux-2.6/drivers/acpi/internal.h
> ===================================================================
> --- linux-2.6.orig/drivers/acpi/internal.h
> +++ linux-2.6/drivers/acpi/internal.h
> @@ -24,10 +24,10 @@ int init_acpi_device_notify(void);
> int acpi_scan_init(void);
> int acpi_sysfs_init(void);
>
> -#ifdef CONFIG_ACPI_DEBUG
> -int acpi_debug_init(void);
> +#ifdef CONFIG_DEBUG_FS
> +int acpi_debugfs_init(void);
> #else
> -static inline int acpi_debug_init(void) { return 0; }
> +static inline int acpi_debugfs_init(void) { return 0; }
> #endif
>
> /* --------------------------------------------------------------------------
> Index: linux-2.6/drivers/acpi/bus.c
> ===================================================================
> --- linux-2.6.orig/drivers/acpi/bus.c
> +++ linux-2.6/drivers/acpi/bus.c
> @@ -1035,7 +1035,7 @@ static int __init acpi_init(void)
> acpi_ec_init();
> acpi_power_init();
> acpi_sysfs_init();
> - acpi_debug_init();
> + acpi_debugfs_init();
> acpi_sleep_proc_init();
> acpi_wakeup_device_init();
> return result;
>
>
next prev parent reply other threads:[~2010-06-13 2:39 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-12 7:46 [PATCH 3/4 V2] ACPI: introduce drivers/acpi/debugfs.c Zhang Rui
2010-06-13 2:39 ` Zhang Rui [this message]
2010-06-22 3:07 ` Len Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1276396763.19052.18982.camel@rzhang1-desktop \
--to=rui.zhang@intel.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).