From mboxrd@z Thu Jan 1 00:00:00 1970 From: Zhang Rui Subject: Re: Hauppauge WinTV-HVR-1120 on Unbuntu 10.04 Date: Tue, 12 Oct 2010 09:00:29 +0800 Message-ID: <1286845229.2111.4078.camel@rui> References: <139193.61347.qm@web25403.mail.ukl.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit Return-path: Received: from mga09.intel.com ([134.134.136.24]:49813 "EHLO mga09.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753658Ab0JLBDP (ORCPT ); Mon, 11 Oct 2010 21:03:15 -0400 In-Reply-To: <139193.61347.qm@web25403.mail.ukl.yahoo.com> Sender: linux-acpi-owner@vger.kernel.org List-Id: linux-acpi@vger.kernel.org To: fabio tirapelle Cc: "linux-acpi@vger.kernel.org" On Mon, 2010-10-11 at 17:41 +0800, fabio tirapelle wrote: > Hi > > After upgrading from Ubuntu 9.10 to Ubuntu 10.04 my Hauppauge WinTV-HVR-1120 > (sometimes) doesn't work correctly. Well, this is not an ACPI problem, so I'm not sure why you report it here. thanks, rui > I get random the following errors: > > [ 53.216153] DVB: registering new adapter (saa7133[0]) > [ 53.216156] DVB: registering adapter 2 frontend 0 (NXP TDA10048HN DVB-T)... > [ 53.840013] tda10048_firmware_upload: waiting for firmware upload > (dvb-fe-tda10048-1.0.fw)... > [ 53.840019] saa7134 0000:01:06.0: firmware: requesting dvb-fe-tda10048-1.0.fw > [ 53.880505] tda10048_firmware_upload: firmware read 24878 bytes. > [ 53.880509] tda10048_firmware_upload: firmware uploading > [ 58.280136] tda10048_firmware_upload: firmware uploaded > [ 59.024537] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer > returned: -5 > [ 59.024541] tda18271c2_rf_tracking_filters_correction: error -5 on line 264 > [ 59.420153] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer > returned: -5 > [ 59.420157] tda18271_toggle_output: error -5 on line 47 > [ 91.004019] Clocksource tsc unstable (delta = -295012684 ns) > [ 256.293639] eth0: link up. > [ 256.294750] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > [ 263.523498] eth0: link down. > [ 265.258740] eth0: link up. > [ 266.460026] eth0: no IPv6 routers present > [ 9869.636167] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer > returned: -5 > [ 9869.636178] tda18271_init: error -5 on line 826 > [ 9872.636220] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer > returned: -5 > [ 9872.636232] tda18271_toggle_output: error -5 on line 47 > [ 9998.240167] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer > returned: -5 > [ 9998.240178] tda18271_init: error -5 on line 826 > [10001.240179] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer > returned: -5 > [10001.240190] tda18271_toggle_output: error -5 on line 47 > > > > Any ideas? > Thanks > > > > -- > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html