From: Zhang Rui <rui.zhang@intel.com>
To: "Brown, Len" <lenb@kernel.org>
Cc: "linux-acpi@vger.kernel.org" <linux-acpi@vger.kernel.org>,
"Zhang, Rui" <rui.zhang@intel.com>
Subject: [PATCH RESEND] ACPI battery: support percentage battery remaining capacity
Date: Fri, 22 Oct 2010 10:02:06 +0800 [thread overview]
Message-ID: <1287712926.2210.16.camel@rui> (raw)
According to the ACPI spec, some kinds of primary battery can
report percentage battery remaining capacity directly to OS.
In this case, it reports the LastFullChargedCapacity == 100,
BatteryPresentRate = 0xFFFFFFFF, and BatteryRemaingCapacity a
percentage value, which actually means RemainingBatteryPercentage.
Now we found some battery follows this rule even if it's a rechargeable.
https://bugzilla.kernel.org/show_bug.cgi?id=15979
Handle these batteries correctly in ACPI battery driver
so that they won't break userspace.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
---
drivers/acpi/battery.c | 38 +++++++++++++++++++++++++++++++++++++-
1 file changed, 37 insertions(+), 1 deletion(-)
Index: linux-2.6/drivers/acpi/battery.c
===================================================================
--- linux-2.6.orig/drivers/acpi/battery.c
+++ linux-2.6/drivers/acpi/battery.c
@@ -95,6 +95,7 @@ enum {
* due to bad math.
*/
ACPI_BATTERY_QUIRK_SIGNED16_CURRENT,
+ ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY,
};
struct acpi_battery {
@@ -405,6 +406,8 @@ static int acpi_battery_get_info(struct
result = extract_package(battery, buffer.pointer,
info_offsets, ARRAY_SIZE(info_offsets));
kfree(buffer.pointer);
+ if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags))
+ battery->full_charge_capacity = battery->design_capacity;
return result;
}
@@ -441,6 +444,10 @@ static int acpi_battery_get_state(struct
battery->rate_now != -1)
battery->rate_now = abs((s16)battery->rate_now);
+ if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags)
+ && battery->capacity_now >= 0 && battery->capacity_now <= 100)
+ battery->capacity_now = (battery->capacity_now *
+ battery->full_charge_capacity) / 100;
return result;
}
@@ -552,6 +559,33 @@ static void acpi_battery_quirks(struct a
}
}
+/*
+ * According to the ACPI spec, some kinds of primary batteries can
+ * report percentage battery remaining capacity directly to OS.
+ * In this case, it reports the Last Full Charged Capacity == 100
+ * and BatteryPresentRate == 0xFFFFFFFF.
+ *
+ * Now we found some battery reports percentage remaining capacity
+ * even if it's rechargeable.
+ * https://bugzilla.kernel.org/show_bug.cgi?id=15979
+ *
+ * Handle this correctly so that they won't break userspace.
+ */
+static void acpi_battery_quirks2(struct acpi_battery *battery)
+{
+ if (test_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags))
+ return ;
+
+ if (battery->full_charge_capacity == 100 &&
+ battery->rate_now == ACPI_BATTERY_VALUE_UNKNOWN &&
+ battery->capacity_now >=0 && battery->capacity_now <= 100) {
+ set_bit(ACPI_BATTERY_QUIRK_PERCENTAGE_CAPACITY, &battery->flags);
+ battery->full_charge_capacity = battery->design_capacity;
+ battery->capacity_now = (battery->capacity_now *
+ battery->full_charge_capacity) / 100;
+ }
+}
+
static int acpi_battery_update(struct acpi_battery *battery)
{
int result, old_present = acpi_battery_present(battery);
@@ -573,7 +607,9 @@ static int acpi_battery_update(struct ac
}
if (!battery->bat.dev)
sysfs_add_battery(battery);
- return acpi_battery_get_state(battery);
+ result = acpi_battery_get_state(battery);
+ acpi_battery_quirks2(battery);
+ return result;
}
/* --------------------------------------------------------------------------
next reply other threads:[~2010-10-22 2:01 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-22 2:02 Zhang Rui [this message]
2010-10-22 2:05 ` [PATCH RESEND] ACPI battery: support percentage battery remaining capacity Zhang Rui
2010-10-22 5:28 ` Len Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1287712926.2210.16.camel@rui \
--to=rui.zhang@intel.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox