From: Huang Ying <ying.huang@intel.com>
To: Len Brown <lenb@kernel.org>
Cc: linux-kernel@vger.kernel.org, Andi Kleen <andi@firstfloor.org>,
Tony Luck <tony.luck@intel.com>,
ying.huang@intel.com, linux-acpi@vger.kernel.org
Subject: [PATCH 09/17] ACPI, APEI, Add APEI bit support in generic _OSC call
Date: Wed, 13 Jul 2011 13:14:20 +0800 [thread overview]
Message-ID: <1310534068-30547-10-git-send-email-ying.huang@intel.com> (raw)
In-Reply-To: <1310534068-30547-1-git-send-email-ying.huang@intel.com>
In APEI firmware first mode, hardware error is reported by hardware to
firmware firstly, then firmware reports the error to Linux in a GHES
error record via POLL/SCI/IRQ/NMI etc.
This may result in some issues if OS has no full APEI support. So
some firmware implementation will work in a back-compatible mode by
default. Where firmware will only notify OS in old-fashion, without
GHES record. For example, for a fatal hardware error, only NMI is
signaled, no GHES record.
To gain full APEI power on these machines, APEI bit in generic _OSC
call can be specified to tell firmware that Linux has full APEI
support. This patch adds the APEI bit support in generic _OSC call.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Matthew Garrett <mjg@redhat.com>
---
drivers/acpi/bus.c | 16 ++++++++++++++--
include/linux/acpi.h | 2 ++
2 files changed, 16 insertions(+), 2 deletions(-)
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -39,6 +39,7 @@
#include <linux/pci.h>
#include <acpi/acpi_bus.h>
#include <acpi/acpi_drivers.h>
+#include <acpi/apei.h>
#include <linux/dmi.h>
#include <linux/suspend.h>
@@ -519,6 +520,7 @@ out_kfree:
}
EXPORT_SYMBOL(acpi_run_osc);
+bool osc_sb_apei_support_acked;
static u8 sb_uuid_str[] = "0811B06E-4A27-44F9-8D60-3CBBC22E7B48";
static void acpi_bus_osc_support(void)
{
@@ -541,11 +543,21 @@ static void acpi_bus_osc_support(void)
#if defined(CONFIG_ACPI_PROCESSOR) || defined(CONFIG_ACPI_PROCESSOR_MODULE)
capbuf[OSC_SUPPORT_TYPE] |= OSC_SB_PPC_OST_SUPPORT;
#endif
+
+#ifdef CONFIG_ACPI_APEI_GHES
+ if (!ghes_disable)
+ capbuf[OSC_SUPPORT_TYPE] |= OSC_SB_APEI_SUPPORT;
+#endif
if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &handle)))
return;
- if (ACPI_SUCCESS(acpi_run_osc(handle, &context)))
+ if (ACPI_SUCCESS(acpi_run_osc(handle, &context))) {
+ u32 *capbuf_ret = context.ret.pointer;
+ if (context.ret.length > OSC_SUPPORT_TYPE)
+ osc_sb_apei_support_acked =
+ capbuf_ret[OSC_SUPPORT_TYPE] & OSC_SB_APEI_SUPPORT;
kfree(context.ret.pointer);
- /* do we need to check the returned cap? Sounds no */
+ }
+ /* do we need to check other returned cap? Sounds no */
}
/* --------------------------------------------------------------------------
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -280,6 +280,8 @@ acpi_status acpi_run_osc(acpi_handle han
#define OSC_SB_CPUHP_OST_SUPPORT 8
#define OSC_SB_APEI_SUPPORT 16
+extern bool osc_sb_apei_support_acked;
+
/* PCI defined _OSC bits */
/* _OSC DW1 Definition (OS Support Fields) */
#define OSC_EXT_PCI_CONFIG_SUPPORT 1
next prev parent reply other threads:[~2011-07-13 5:14 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-07-13 5:14 [PATCH 00/17] ACPI, APEI, Patches for 3.1 Huang Ying
2011-07-13 5:14 ` [PATCH 01/17] ACPI, APEI, HEST, Detect duplicated hardware error source ID Huang Ying
2011-07-14 3:28 ` Len Brown
2011-07-13 5:14 ` [PATCH 02/17] ACPI, APEI, ERST, Prevent erst_dbg from loading if ERST is disabled Huang Ying
2011-07-14 3:30 ` Len Brown
2011-07-13 5:14 ` [PATCH 03/17] ACPI, APEI, ERST, Fix erst-dbg long record reading issue Huang Ying
2011-07-14 3:32 ` Len Brown
2011-07-13 5:14 ` [PATCH 04/17] ACPI, APEI, GHES, Do not ratelimit fatal error printk before panic Huang Ying
2011-07-14 3:33 ` Len Brown
2011-07-13 5:14 ` [PATCH 05/17] ACPI, APEI, Add apei_exec_run_optional Huang Ying
2011-07-13 5:14 ` [PATCH 06/17] ACPI, APEI, Use apei_exec_run_optional in APEI EINJ and ERST Huang Ying
2011-07-13 5:14 ` [PATCH 07/17] ACPI, APEI, GHES, Prevent GHES to be built as module Huang Ying
2011-07-14 3:36 ` Len Brown
2011-07-13 5:14 ` [PATCH 08/17] ACPI, APEI, GHES, Support disable GHES at boot time Huang Ying
2011-07-14 14:47 ` Don Zickus
2011-07-15 0:31 ` Huang Ying
2011-07-15 13:33 ` Don Zickus
2011-07-13 5:14 ` Huang Ying [this message]
2011-07-14 14:48 ` [PATCH 09/17] ACPI, APEI, Add APEI bit support in generic _OSC call Don Zickus
2011-07-13 5:14 ` [PATCH 10/17] ACPI, APEI, Add WHEA _OSC support Huang Ying
2011-07-14 14:50 ` Don Zickus
2011-07-13 5:14 ` [PATCH 11/17] Add Kconfig option ARCH_HAVE_NMI_SAFE_CMPXCHG Huang Ying
2011-07-13 5:14 ` [PATCH 12/17] lib, Add lock-less NULL terminated single list Huang Ying
2011-07-13 5:14 ` [PATCH 13/17] lib, Make gen_pool memory allocator lockless Huang Ying
2011-07-13 5:14 ` [PATCH 14/17] ACPI, APEI, GHES, printk support for recoverable error via NMI Huang Ying
2011-07-13 5:14 ` [PATCH 15/17] ACPI, APEI, GHES, Error records content based throttle Huang Ying
2011-07-13 5:14 ` [PATCH 16/17] HWPoison: add memory_failure_queue() Huang Ying
2011-07-13 5:14 ` [PATCH 17/17] ACPI, APEI, GHES: Add hardware memory error recovery support Huang Ying
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1310534068-30547-10-git-send-email-ying.huang@intel.com \
--to=ying.huang@intel.com \
--cc=andi@firstfloor.org \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=tony.luck@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox