From: Toshi Kani <toshi.kani@hp.com>
To: lenb@kernel.org, linux-acpi@vger.kernel.org
Cc: bhelgaas@google.com, shuahkhan@gmail.com, liuj97@gmail.com,
linux-kernel@vger.kernel.org, Toshi Kani <toshi.kani@hp.com>
Subject: [PATCH v3 0/7] ACPI: Add _OST support for ACPI hotplug
Date: Fri, 11 May 2012 10:36:56 -0600 [thread overview]
Message-ID: <1336754223-5346-1-git-send-email-toshi.kani@hp.com> (raw)
This patchset supports ACPI OSPM Status Indication (_OST) method for
ACPI CPU/memory/container hotplug operations and sysfs eject. After
ACPI hotplug operation has completed, OSPM calls _OST to indicate the
result of the operation to the platform. If _OST is not present, this
patchset has no effect on the platform.
This _OST support can be enabled or disabled with a new config option
CONFIG_ACPI_HOTPLUG_OST. This option is disabled by default. When
this option is disabled, this patchset has no effect on the platform.
Some platforms may require the OS to support _OST in order to support
ACPI hotplug operations. For example, if a platform has the management
console where user can request a hotplug operation from, this _OST
support would be required for the management console to show the result
of the hotplug request to user.
The _OST definition can be found in section 6.3.5 of ACPI 5.0 spec.
The HPPF spec below also describes hotplug flows with _OST.
DIG64 Hot-Plug & Partitioning Flow (HPPF) Specification R1.0
http://www.dig64.org/home/DIG64_HPPF_R1_0.pdf
The changes have been tested with simulated _OST methods.
v3:
- Added more descriptions to the change logs.
v2:
- Added CONFIG_ACPI_HOTPLUG_OST option.
- Added _OST support for container hotplug and sysfs eject.
- Reordered patchset to enable _OST support bit of _OSC in the
last patch.
---
Toshi Kani (7):
ACPI: Add CONFIG_HOTPLUG_OST option
ACPI: Add an interface to evaluate _OST
ACPI: Add _OST support for sysfs eject
ACPI: Add _OST support for ACPI CPU hotplug
ACPI: Add _OST support for ACPI memory hotplug
ACPI: Add _OST support for ACPI container hotplug
ACPI: Set hotplug _OST support bit to _OSC
drivers/acpi/Kconfig | 14 +++++++++
drivers/acpi/acpi_memhotplug.c | 43 +++++++++++++++++++++-------
drivers/acpi/bus.c | 4 +++
drivers/acpi/container.c | 43 +++++++++++++++++++----------
drivers/acpi/processor_driver.c | 28 +++++++++++++-----
drivers/acpi/scan.c | 58 +++++++++++++++++++++++++++++++++------
drivers/acpi/utils.c | 38 +++++++++++++++++++++++++
include/acpi/acpi_bus.h | 12 +++++++-
include/linux/acpi.h | 31 ++++++++++++++++++++-
9 files changed, 226 insertions(+), 45 deletions(-)
next reply other threads:[~2012-05-11 16:36 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-11 16:36 Toshi Kani [this message]
2012-05-11 16:36 ` [PATCH v3 1/7] ACPI: Add CONFIG_HOTPLUG_OST option Toshi Kani
2012-05-11 16:36 ` [PATCH v3 2/7] ACPI: Add an interface to evaluate _OST Toshi Kani
2012-05-11 16:36 ` [PATCH v3 3/7] ACPI: Add _OST support for sysfs eject Toshi Kani
2012-05-11 16:37 ` [PATCH v3 4/7] ACPI: Add _OST support for ACPI CPU hotplug Toshi Kani
2012-05-11 16:37 ` [PATCH v3 5/7] ACPI: Add _OST support for ACPI memory hotplug Toshi Kani
2012-05-11 16:37 ` [PATCH v3 6/7] ACPI: Add _OST support for ACPI container hotplug Toshi Kani
2012-05-11 16:37 ` [PATCH v3 7/7] ACPI: Set hotplug _OST support bit to _OSC Toshi Kani
2012-05-11 17:09 ` [PATCH v3 0/7] ACPI: Add _OST support for ACPI hotplug Andi Kleen
2012-05-11 17:24 ` Toshi Kani
2012-05-23 23:37 ` Toshi Kani
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1336754223-5346-1-git-send-email-toshi.kani@hp.com \
--to=toshi.kani@hp.com \
--cc=bhelgaas@google.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=liuj97@gmail.com \
--cc=shuahkhan@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).