[PATCH V2 2/3] usb/acpi: add the support of usb hub ports' acpi binding without attached devices.

[PATCH V2 2/3] usb/acpi: add the support of usb hub ports' acpi binding without attached devices.

[Lan Tianyu]

The usb port is a device in the acpi table but it's not in the linux
usb subsystem. USB hub port doesn't have struct device. So the acpi
glue framework only can cover the usb port connected with usb device
and store the acpi handle to struct device.archdata.acpi_handle. This
patch is to add member port_acpi_handle in the struct usb_hub_port to
store acpi handle. The acpi method "_UPC" and "_PLD" can be accessed
without attached device.

Signed-off-by: Lan Tianyu <tianyu.lan-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
 drivers/usb/core/hub.c      |   44 +++++++++++++++++++++++++++++++++++++++++++
 drivers/usb/core/usb-acpi.c |   37 +++++++++++++++++++++++++++++++++++-
 drivers/usb/core/usb.h      |    9 ++++++++
 3 files changed, 89 insertions(+), 1 deletions(-)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 6f909db..c9d42e2 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -30,6 +30,10 @@
 
 #include "usb.h"
 
+#ifdef CONFIG_ACPI
+#include <linux/acpi.h>
+#endif
+
 /* if we are in debug mode, always announce new devices */
 #ifdef DEBUG
 #ifndef CONFIG_USB_ANNOUNCE_NEW_DEVICES
@@ -40,6 +44,9 @@
 struct usb_hub_port {
 	void			*port_owner;
 	struct usb_device	*child;
+#ifdef CONFIG_ACPI
+	acpi_handle		port_acpi_handle;
+#endif
 };
 
 struct usb_hub {
@@ -1263,6 +1270,7 @@ static int hub_configure(struct usb_hub *hub,
 	if (hub->has_indicators && blinkenlights)
 		hub->indicator [0] = INDICATOR_CYCLE;
 
+	usb_acpi_bind_hub_ports(hdev);
 	hub_activate(hub, HUB_INIT);
 	return 0;
 
@@ -4261,3 +4269,39 @@ struct usb_device *usb_get_hub_child_device(struct usb_device *hdev,
 }
 EXPORT_SYMBOL_GPL(usb_get_hub_child_device);
 
+#ifdef CONFIG_ACPI
+/**
+ * usb_set_hub_port_acpi_handle - Set the usb port's acpi handle
+ *
+ * @hdev: USB device belonging to the usb hub
+ * @port1: port num of the port
+ * @handle: port's acpi handle
+ */
+void usb_set_hub_port_acpi_handle(struct usb_device *hdev, int port1,
+	void *handle)
+{
+	struct usb_hub *hub = hdev_to_hub(hdev);
+
+	if (!hub || port1 > hdev->maxchild || port1 < 1)
+		return;
+	hub->port_data[port1 - 1].port_acpi_handle = handle;
+}
+
+/**
+ * usb_get_hub_port_acpi_handle - Get the usb port's acpi handle
+ *
+ * @hdev: USB device belonging to the usb hub
+ * @port1: port num of the port
+ *
+ * Return port's acpi handle if successful, NULL if params are
+ * invaild.
+ */
+acpi_handle usb_get_hub_port_acpi_handle(struct usb_device *hdev, int port1)
+{
+	struct usb_hub *hub = hdev_to_hub(hdev);
+
+	if (!hub || port1 > hdev->maxchild || port1 < 1)
+		return NULL;
+	return hub->port_data[port1 - 1].port_acpi_handle;
+}
+#endif
diff --git a/drivers/usb/core/usb-acpi.c b/drivers/usb/core/usb-acpi.c
index 8947b20..e609664 100644
--- a/drivers/usb/core/usb-acpi.c
+++ b/drivers/usb/core/usb-acpi.c
@@ -83,7 +83,16 @@ static int usb_acpi_find_device(struct device *dev, acpi_handle *handle)
 	if (!parent_handle)
 		return -ENODEV;
 
-	*handle = acpi_get_child(parent_handle, udev->portnum);
+	/*
+	 * The root hub's acpi handle is got from acpi method.
+	 * Other device's acpi handle can be got from the usb hub
+	 * port's platform_data.
+	 */
+	if (!udev->parent)
+		*handle = acpi_get_child(parent_handle, udev->portnum);
+	else
+		*handle = usb_get_hub_port_acpi_handle(
+				udev->parent, udev->portnum);
 
 	if (!*handle)
 		return -ENODEV;
@@ -106,6 +115,32 @@ static struct acpi_bus_type usb_acpi_bus = {
 	.find_device = usb_acpi_find_device,
 };
 
+int usb_acpi_bind_hub_ports(struct usb_device *hdev)
+{
+	acpi_handle hub_handle = NULL;
+	acpi_handle port_handle = NULL;
+	struct device *dev = &hdev->dev;
+	int i;
+
+	hub_handle = DEVICE_ACPI_HANDLE(dev);
+	if (!hub_handle)
+		return -ENODEV;
+
+	/*
+	 * usb hub port is not a device in the usb subsystem but it is a device
+	 * in the acpi table. Store its acpi handle in the platform data of usb
+	 * hub port.
+	 */
+	for (i = 1; i <= hdev->maxchild; i++) {
+		port_handle = acpi_get_child(hub_handle, i);
+		if (!port_handle)
+			continue;
+		usb_set_hub_port_acpi_handle(hdev, i,
+			port_handle);
+	}
+	return 0;
+}
+
 int usb_acpi_register(void)
 {
 	return register_acpi_bus_type(&usb_acpi_bus);
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 5c5c538..b2b0cb3 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -1,5 +1,8 @@
 #include <linux/pm.h>
 
+#ifdef CONFIG_ACPI
+#include <linux/acpi.h>
+#endif
 /* Functions local to drivers/usb/core/ */
 
 extern int usb_create_sysfs_dev_files(struct usb_device *dev);
@@ -159,7 +162,13 @@ extern void usb_notify_remove_bus(struct usb_bus *ubus);
 #ifdef CONFIG_ACPI
 extern int usb_acpi_register(void);
 extern void usb_acpi_unregister(void);
+extern int usb_acpi_bind_hub_ports(struct usb_device *hdev);
+extern void usb_set_hub_port_acpi_handle(struct usb_device *hdev,
+	int port1, acpi_handle handle);
+extern acpi_handle usb_get_hub_port_acpi_handle(struct usb_device *hdev,
+	int port1);
 #else
 static inline int usb_acpi_register(void) { return 0; };
 static inline void usb_acpi_unregister(void) { };
+static inline int usb_acpi_bind_hub_ports(struct usb_device *dev) { return 0; };
 #endif
-- 
1.7.6.rc2.8.g28eb

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH V2 3/3] usb/acpi: add usb check for the connect type of usb port

[Lan Tianyu]

Check the connect type of usb port when getting the usb port's
acpi_handle and store result into connect_type in the struct
usb_hub_port.

Accoding to ACPI Spec 9.13. PLD indicates whether usb port is
user visible and _UPC indicates whether it is connectable. If
the port was visible and connectable, it could be freely connected
and disconnected with USB devices. If no visible and connectable,
a usb device is directly hard-wired to the port. If no visible and
no connectable, the port would be not used.

When a device was found on the port, if the connect_type was hot-plug,
then the device would be removable. If the connect_type was hard-wired,
the device would be non-removable.

Signed-off-by: Lan Tianyu <tianyu.lan-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
---
 drivers/usb/core/hub.c      |   46 +++++++++++++++++++++++++++++
 drivers/usb/core/usb-acpi.c |   67 ++++++++++++++++++++++--------------------
 drivers/usb/core/usb.h      |    4 ++
 include/linux/usb.h         |    7 ++++
 4 files changed, 92 insertions(+), 32 deletions(-)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index c9d42e2..34c9dab 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -47,6 +47,7 @@ struct usb_hub_port {
 #ifdef CONFIG_ACPI
 	acpi_handle		port_acpi_handle;
 #endif
+	enum usb_port_connect_type connect_type;
 };
 
 struct usb_hub {
@@ -4269,6 +4270,51 @@ struct usb_device *usb_get_hub_child_device(struct usb_device *hdev,
 }
 EXPORT_SYMBOL_GPL(usb_get_hub_child_device);
 
+/**
+ * usb_set_hub_port_connect_type - set hub port connect type.
+ *
+ * @hdev: USB device belonging to the usb hub
+ * @port1: port num of the port
+ * @type: connect type of the port
+ *		USB_PORT_CONNECT_TYPE_UNKNOWN
+ *		USB_PORT_CONNECT_TYPE_HOT_PLUG
+ *		USB_PORT_CONNECT_TYPE_HARD_WIRED
+ *		USB_PORT_NOT_USED
+ */
+void usb_set_hub_port_connect_type(struct usb_device *hdev, int port1,
+	enum usb_port_connect_type type)
+{
+	struct usb_hub *hub = hdev_to_hub(hdev);
+
+	if (!hub || port1 > hdev->maxchild || port1 < 1)
+		return;
+	hub->port_data[port1 - 1].connect_type = type;
+}
+
+/**
+ * usb_get_hub_port_connect_type - Get the port's connect
+ * type
+ *
+ * @hdev: USB device belonging to the usb hub
+ * @port1: port num of the port
+ *
+ * Return connect type of the port annd if input params are
+ *	invalid, return USB_PORT_CONNECT_TYPE_UNKNOWN.
+ *		USB_PORT_CONNECT_TYPE_UNKNOWN
+ *		USB_PORT_CONNECT_TYPE_HOT_PLUG
+ *		USB_PORT_CONNECT_TYPE_HARD_WIRED
+ *		USB_PORT_NOT_USED
+ */
+enum usb_port_connect_type
+usb_get_hub_port_connect_type(struct usb_device *hdev,	int port1)
+{
+	struct usb_hub *hub = hdev_to_hub(hdev);
+
+	if (!hub || port1 > hdev->maxchild || port1 < 1)
+		return USB_PORT_CONNECT_TYPE_UNKNOWN;
+	return hub->port_data[port1 - 1].connect_type;
+}
+
 #ifdef CONFIG_ACPI
 /**
  * usb_set_hub_port_acpi_handle - Set the usb port's acpi handle
diff --git a/drivers/usb/core/usb-acpi.c b/drivers/usb/core/usb-acpi.c
index e609664..82c90d0 100644
--- a/drivers/usb/core/usb-acpi.c
+++ b/drivers/usb/core/usb-acpi.c
@@ -19,20 +19,32 @@
 
 #include "usb.h"
 
-static int usb_acpi_check_upc(struct usb_device *udev, acpi_handle handle)
+static int usb_acpi_check_port_connect_type(struct usb_device *hdev,
+	acpi_handle handle, int port1)
 {
 	acpi_status status;
 	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 	union acpi_object *upc;
+	struct acpi_pld pld;
 	int ret = 0;
 
-	status = acpi_evaluate_object(handle, "_UPC", NULL, &buffer);
+	/*
+	 * Accoding to ACPI Spec 9.13. PLD indicates whether usb port is
+	 * user visible and _UPC indicates whether it is connectable. If
+	 * the port was visible and connectable, it could be freely connected
+	 * and disconnected with USB devices. If no visible and connectable,
+	 * a usb device is directly hard-wired to the port. If no visible and
+	 * no connectable, the port would be not used.
+	 */
+	status = acpi_get_physical_device_location(handle, &pld);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
 
+	status = acpi_evaluate_object(handle, "_UPC", NULL, &buffer);
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
 
 	upc = buffer.pointer;
-
 	if (!upc || (upc->type != ACPI_TYPE_PACKAGE)
 		|| upc->package.count != 4) {
 		ret = -EINVAL;
@@ -40,38 +52,24 @@ static int usb_acpi_check_upc(struct usb_device *udev, acpi_handle handle)
 	}
 
 	if (upc->package.elements[0].integer.value)
-		udev->removable = USB_DEVICE_REMOVABLE;
-	else
-		udev->removable = USB_DEVICE_FIXED;
+		usb_set_hub_port_connect_type(hdev, port1,
+				pld.user_visible ?
+					USB_PORT_CONNECT_TYPE_HOT_PLUG :
+					USB_PORT_CONNECT_TYPE_HARD_WIRED);
+	else if (!pld.user_visible)
+		usb_set_hub_port_connect_type(hdev, port1, USB_PORT_NOT_USED);
 
 out:
 	kfree(upc);
 	return ret;
 }
 
-static int usb_acpi_check_pld(struct usb_device *udev, acpi_handle handle)
-{
-	acpi_status status;
-	struct acpi_pld pld;
-
-	status = acpi_get_physical_device_location(handle, &pld);
-
-	if (ACPI_FAILURE(status))
-		return -ENODEV;
-
-	if (pld.user_visible)
-		udev->removable = USB_DEVICE_REMOVABLE;
-	else
-		udev->removable = USB_DEVICE_FIXED;
-
-	return 0;
-}
-
 static int usb_acpi_find_device(struct device *dev, acpi_handle *handle)
 {
 	struct usb_device *udev;
 	struct device *parent;
 	acpi_handle *parent_handle;
+	enum usb_port_connect_type type;
 
 	if (!is_usb_device(dev))
 		return -ENODEV;
@@ -97,14 +95,18 @@ static int usb_acpi_find_device(struct device *dev, acpi_handle *handle)
 	if (!*handle)
 		return -ENODEV;
 
-	/*
-	 * PLD will tell us whether a port is removable to the user or
-	 * not. If we don't get an answer from PLD (it's not present
-	 * or it's malformed) then try to infer it from UPC. If a
-	 * device isn't connectable then it's probably not removable.
-	 */
-	if (usb_acpi_check_pld(udev, *handle) != 0)
-		usb_acpi_check_upc(udev, *handle);
+	type = usb_get_hub_port_connect_type(udev->parent, udev->portnum);
+	switch (type) {
+	case USB_PORT_CONNECT_TYPE_HOT_PLUG:
+		udev->removable = USB_DEVICE_REMOVABLE;
+		break;
+	case USB_PORT_CONNECT_TYPE_HARD_WIRED:
+		udev->removable = USB_DEVICE_FIXED;
+		break;
+	default:
+		udev->removable = USB_DEVICE_REMOVABLE_UNKNOWN;
+		break;
+	}
 
 	return 0;
 }
@@ -137,6 +139,7 @@ int usb_acpi_bind_hub_ports(struct usb_device *hdev)
 			continue;
 		usb_set_hub_port_acpi_handle(hdev, i,
 			port_handle);
+		usb_acpi_check_port_connect_type(hdev, port_handle, i);
 	}
 	return 0;
 }
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index b2b0cb3..da78c15 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -158,6 +158,10 @@ extern void usb_notify_add_device(struct usb_device *udev);
 extern void usb_notify_remove_device(struct usb_device *udev);
 extern void usb_notify_add_bus(struct usb_bus *ubus);
 extern void usb_notify_remove_bus(struct usb_bus *ubus);
+extern enum usb_port_connect_type
+	usb_get_hub_port_connect_type(struct usb_device *hdev, int port1);
+extern void usb_set_hub_port_connect_type(struct usb_device *hdev, int port1,
+	enum usb_port_connect_type type);
 
 #ifdef CONFIG_ACPI
 extern int usb_acpi_register(void);
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 69163a0..2256b78 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -378,6 +378,13 @@ enum usb_device_removable {
 	USB_DEVICE_FIXED,
 };
 
+enum usb_port_connect_type {
+	USB_PORT_CONNECT_TYPE_UNKNOWN = 0,
+	USB_PORT_CONNECT_TYPE_HOT_PLUG,
+	USB_PORT_CONNECT_TYPE_HARD_WIRED,
+	USB_PORT_NOT_USED,
+};
+
 /**
  * struct usb_device - kernel's representation of a USB device
  * @devnum: device number; address on a USB bus
-- 
1.7.6.rc2.8.g28eb

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html