From: Amit Daniel Kachhap <amit.kachhap@linaro.org>
To: linux-pm@lists.linux-foundation.org, lenb@kernel.org
Cc: linux-samsung-soc@vger.kernel.org,
SangWook Ju <sw.ju@samsung.com>,
linux-kernel@vger.kernel.org, lm-sensors@lm-sensors.org,
linux-acpi@vger.kernel.org, Jean Delvare <khali@linux-fr.org>,
akpm@linux-foundation.org, Donggeun Kim <dg77.kim@samsung.com>
Subject: [RESEND PATCH v4 5/5] ARM: exynos: add thermal sensor driver platform data support
Date: Thu, 12 Jul 2012 19:11:08 +0530 [thread overview]
Message-ID: <1342100468-19426-6-git-send-email-amit.kachhap@linaro.org> (raw)
In-Reply-To: <1342100468-19426-1-git-send-email-amit.kachhap@linaro.org>
Add necessary default platform data support needed for TMU driver. This
dt/non-dt values are tested for origen exynos4210 and smdk exynos5250
platforms.
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@linaro.org>
Cc: Donggeun Kim <dg77.kim@samsung.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: SangWook Ju <sw.ju@samsung.com>
Cc: Durgadoss <durgadoss.r@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
---
drivers/thermal/exynos_thermal.c | 111 +++++++++++++++++++++++++++++++++++++-
1 files changed, 110 insertions(+), 1 deletions(-)
diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c
index 52255fb..b561295 100644
--- a/drivers/thermal/exynos_thermal.c
+++ b/drivers/thermal/exynos_thermal.c
@@ -662,14 +662,121 @@ static irqreturn_t exynos_tmu_irq(int irq, void *id)
static struct thermal_sensor_conf exynos_sensor_conf = {
.name = "exynos-therm",
.read_temperature = (int (*)(void *))exynos_tmu_read,
+};
+
+#if defined(CONFIG_CPU_EXYNOS4210)
+static struct exynos_tmu_platform_data const exynos4_default_tmu_data = {
+ .threshold = 80,
+ .trigger_levels[0] = 5,
+ .trigger_levels[1] = 20,
+ .trigger_levels[2] = 30,
+ .trigger_level0_en = 1,
+ .trigger_level1_en = 1,
+ .trigger_level2_en = 1,
+ .trigger_level3_en = 0,
+ .gain = 15,
+ .reference_voltage = 7,
+ .cal_type = TYPE_ONE_POINT_TRIMMING,
+ .freq_tab[0] = {
+ .freq_clip_max = 800 * 1000,
+ .temp_level = 85,
+ },
+ .freq_tab[1] = {
+ .freq_clip_max = 200 * 1000,
+ .temp_level = 100,
+ },
+ .freq_tab_count = 2,
+ .type = SOC_ARCH_EXYNOS4,
+};
+#define EXYNOS4_TMU_DRV_DATA (&exynos4_default_tmu_data)
+#else
+#define EXYNOS4_TMU_DRV_DATA (NULL)
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS5250)
+static struct exynos_tmu_platform_data const exynos5_default_tmu_data = {
+ .trigger_levels[0] = 85,
+ .trigger_levels[1] = 103,
+ .trigger_levels[2] = 110,
+ .trigger_level0_en = 1,
+ .trigger_level1_en = 1,
+ .trigger_level2_en = 1,
+ .trigger_level3_en = 0,
+ .gain = 8,
+ .reference_voltage = 16,
+ .noise_cancel_mode = 4,
+ .cal_type = TYPE_ONE_POINT_TRIMMING,
+ .efuse_value = 55,
+ .freq_tab[0] = {
+ .freq_clip_max = 800 * 1000,
+ .temp_level = 85,
+ },
+ .freq_tab[1] = {
+ .freq_clip_max = 200 * 1000,
+ .temp_level = 103,
+ },
+ .freq_tab_count = 2,
+ .type = SOC_ARCH_EXYNOS5,
+};
+#define EXYNOS5_TMU_DRV_DATA (&exynos5_default_tmu_data)
+#else
+#define EXYNOS5_TMU_DRV_DATA (NULL)
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id exynos_tmu_match[] = {
+ {
+ .compatible = "samsung,exynos4-tmu",
+ .data = (void *)EXYNOS4_TMU_DRV_DATA,
+ },
+ {
+ .compatible = "samsung,exynos5-tmu",
+ .data = (void *)EXYNOS5_TMU_DRV_DATA,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, exynos_tmu_match);
+#else
+#define exynos_tmu_match NULL
+#endif
+
+static struct platform_device_id exynos_tmu_driver_ids[] = {
+ {
+ .name = "exynos4-tmu",
+ .driver_data = (kernel_ulong_t)EXYNOS4_TMU_DRV_DATA,
+ },
+ {
+ .name = "exynos5-tmu",
+ .driver_data = (kernel_ulong_t)EXYNOS5_TMU_DRV_DATA,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(platform, exynos4_tmu_driver_ids);
+
+static inline struct exynos_tmu_platform_data *exynos_get_driver_data(
+ struct platform_device *pdev)
+{
+#ifdef CONFIG_OF
+ if (pdev->dev.of_node) {
+ const struct of_device_id *match;
+ match = of_match_node(exynos_tmu_match, pdev->dev.of_node);
+ if (!match)
+ return NULL;
+ return (struct exynos_tmu_platform_data *) match->data;
+ }
+#endif
+ return (struct exynos_tmu_platform_data *)
+ platform_get_device_id(pdev)->driver_data;
}
-;
static int __devinit exynos_tmu_probe(struct platform_device *pdev)
{
struct exynos_tmu_data *data;
struct exynos_tmu_platform_data *pdata = pdev->dev.platform_data;
int ret, i;
+ if (!pdata)
+ pdata = exynos_get_driver_data(pdev);
+
if (!pdata) {
dev_err(&pdev->dev, "No platform init data supplied.\n");
return -ENODEV;
@@ -832,11 +939,13 @@ static struct platform_driver exynos_tmu_driver = {
.driver = {
.name = "exynos-tmu",
.owner = THIS_MODULE,
+ .of_match_table = exynos_tmu_match,
},
.probe = exynos_tmu_probe,
.remove = __devexit_p(exynos_tmu_remove),
.suspend = exynos_tmu_suspend,
.resume = exynos_tmu_resume,
+ .id_table = exynos_tmu_driver_ids,
};
module_platform_driver(exynos_tmu_driver);
--
1.7.1
prev parent reply other threads:[~2012-07-12 13:41 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-12 13:41 [RESEND PATCH v4 0/5] thermal: Add kernel thermal support for exynos platform Amit Daniel Kachhap
2012-07-12 13:41 ` [RESEND PATCH v4 1/5] thermal: add generic cpufreq cooling implementation Amit Daniel Kachhap
2012-07-12 15:10 ` Valentin, Eduardo
2012-07-13 8:58 ` amit kachhap
2012-07-13 11:03 ` [linux-pm] " rakesh singh
2012-07-12 23:04 ` Andrew Morton
2012-07-13 10:54 ` amit kachhap
2012-07-12 13:41 ` [RESEND PATCH v4 2/5] hwmon: exynos4: move thermal sensor driver to driver/thermal directory Amit Daniel Kachhap
2012-07-12 13:41 ` [RESEND PATCH v4 3/5] thermal: exynos5: add exynos5 thermal sensor driver support Amit Daniel Kachhap
2012-07-12 13:41 ` [RESEND PATCH v4 4/5] thermal: exynos: register the tmu sensor with the kernel thermal layer Amit Daniel Kachhap
2012-07-12 13:41 ` Amit Daniel Kachhap [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1342100468-19426-6-git-send-email-amit.kachhap@linaro.org \
--to=amit.kachhap@linaro.org \
--cc=akpm@linux-foundation.org \
--cc=dg77.kim@samsung.com \
--cc=khali@linux-fr.org \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@lists.linux-foundation.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
--cc=sw.ju@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).