RE: [PATCH 03/16] Thermal: Documentation update

[Zhang Rui <rui.zhang@intel.com>]

Hi, Durga,

thanks for review. :)

On 四, 2012-07-19 at 04:51 -0600, R, Durgadoss wrote:
> Hi Rui,
> 
> No major comments. Just some spell checks.
> 
> > -----Original Message-----
> > From: Zhang, Rui
> > Sent: Thursday, July 19, 2012 12:01 PM
> > To: linux-acpi@vger.kernel.org; linux-pm@vger.kernel.org
> > Cc: Rafael J. Wysocki; Matthew Garrett; Len Brown; R, Durgadoss; Eduardo
> > Valentin; Amit Kachhap; Wei Ni; Zhang, Rui
> > Subject: [PATCH 03/16] Thermal: Documentation update
> > 
> > With commit 6503e5df08008b9a47022b5e9ebba658c8fa69af,
> > the value of /sys/class/thermal/thermal_zoneX/mode has been changed
> > from user/kernel to enabled/disabled.
> > Update the documentation so that users won't be confused.
> > 
> > Signed-off-by: Zhang Rui <rui.zhang@intel.com>
> > ---
> >  Documentation/thermal/sysfs-api.txt |   20 ++++++++++----------
> >  drivers/acpi/thermal.c              |    6 ++----
> >  2 files changed, 12 insertions(+), 14 deletions(-)
> > 
> > diff --git a/Documentation/thermal/sysfs-api.txt
> > b/Documentation/thermal/sysfs-api.txt
> > index 3c8c2f8..b7b3609 100644
> > --- a/Documentation/thermal/sysfs-api.txt
> > +++ b/Documentation/thermal/sysfs-api.txt
> > @@ -47,11 +47,11 @@ temperature) and throttle appropriate devices.
> >  	.bind: bind the thermal zone device with a thermal cooling device.
> >  	.unbind: unbind the thermal zone device with a thermal cooling device.
> >  	.get_temp: get the current temperature of the thermal zone.
> > -	.get_mode: get the current mode (user/kernel) of the thermal zone.
> > -	    - "kernel" means thermal management is done in kernel.
> > -	    - "user" will prevent kernel thermal driver actions upon trip points
> > +	.get_mode: get the current mode (enabled/disabled) of the thermal
> > zone.
> > +	    - "enabled" means the kernel thermal management is enabled.
> > +	    - "disable" will prevent kernel thermal driver actions upon trip points
> 
> /s/disable/disabled
> 
fixed.

thanks,
rui
> >  	      so that user applications can take charge of thermal management.
> > -	.set_mode: set the mode (user/kernel) of the thermal zone.
> > +	.set_mode: set the mode (enabled/disabled) of the thermal zone.
> >  	.get_trip_type: get the type of certain trip point.
> >  	.get_trip_temp: get the temperature above which the certain trip point
> >  			will be fired.
> > @@ -170,14 +170,14 @@ temp
> >  	RO, Required
> > 
> >  mode
> > -	One of the predefined values in [kernel, user].
> > +	One of the predefined values in [enabled, disableed].
> 
> /s/disableed/disabled
> 
> Thanks,
> Durga


--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html