linux-acpi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Zhang Rui <rui.zhang@intel.com>
To: "Rafael J. Wysocki" <rjw@sisk.pl>,
	Matthew Garrett <mjg@redhat.com>, Len Brown <lenb@kernel.org>,
	R Durgadoss <durgadoss.r@intel.com>,
	Eduardo Valentin <eduardo.valentin@ti.com>,
	Amit Kachhap <amit.kachhap@linaro.org>, Wei Ni <wni@nvidia.com>,
	Zhang Rui <rui.zhang@intel.com>
Cc: linux-acpi@vger.kernel.org, linux-pm@vger.kernel.org
Subject: [PATCH RESEND 10/16] Thermal: rename structure thermal_cooling_device_instance to thermal_instance
Date: Wed, 25 Jul 2012 10:11:07 +0800	[thread overview]
Message-ID: <1343182273-32096-11-git-send-email-rui.zhang@intel.com> (raw)
In-Reply-To: <1343182273-32096-1-git-send-email-rui.zhang@intel.com>

This struct is used to describe the behavior for a thermal
cooling device on a certain trip point for a certain thremal zone.

thermal_cooling_device_instance is not accurate, as a cooling device
can be used for more than one trip point in one thermal zone device.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
---
 drivers/thermal/thermal_sys.c |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
index cc1b192..6f245c8 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_sys.c
@@ -46,7 +46,7 @@ MODULE_LICENSE("GPL");
  * a certain cooling device on a certain trip point
  * in a certain thermal zone
  */
-struct thermal_cooling_device_instance {
+struct thermal_instance {
 	int id;
 	char name[THERMAL_NAME_LENGTH];
 	struct thermal_zone_device *tz;
@@ -430,10 +430,10 @@ static ssize_t
 thermal_cooling_device_trip_point_show(struct device *dev,
 				       struct device_attribute *attr, char *buf)
 {
-	struct thermal_cooling_device_instance *instance;
+	struct thermal_instance *instance;
 
 	instance =
-	    container_of(attr, struct thermal_cooling_device_instance, attr);
+	    container_of(attr, struct thermal_instance, attr);
 
 	if (instance->trip == THERMAL_TRIPS_NONE)
 		return sprintf(buf, "-1\n");
@@ -731,7 +731,7 @@ static void thermal_zone_device_passive(struct thermal_zone_device *tz,
 					int temp, int trip_temp, int trip)
 {
 	enum thermal_trend trend;
-	struct thermal_cooling_device_instance *instance;
+	struct thermal_instance *instance;
 	struct thermal_cooling_device *cdev;
 	long state, max_state;
 
@@ -816,8 +816,8 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
 				     struct thermal_cooling_device *cdev,
 				     unsigned long upper, unsigned long lower)
 {
-	struct thermal_cooling_device_instance *dev;
-	struct thermal_cooling_device_instance *pos;
+	struct thermal_instance *dev;
+	struct thermal_instance *pos;
 	struct thermal_zone_device *pos1;
 	struct thermal_cooling_device *pos2;
 	unsigned long max_state;
@@ -848,7 +848,7 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
 		return -EINVAL;
 
 	dev =
-	    kzalloc(sizeof(struct thermal_cooling_device_instance), GFP_KERNEL);
+	    kzalloc(sizeof(struct thermal_instance), GFP_KERNEL);
 	if (!dev)
 		return -ENOMEM;
 	dev->tz = tz;
@@ -913,7 +913,7 @@ int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz,
 				       int trip,
 				       struct thermal_cooling_device *cdev)
 {
-	struct thermal_cooling_device_instance *pos, *next;
+	struct thermal_instance *pos, *next;
 
 	mutex_lock(&tz->lock);
 	list_for_each_entry_safe(pos, next, &tz->cooling_devices, node) {
@@ -1099,7 +1099,7 @@ EXPORT_SYMBOL(thermal_cooling_device_unregister);
 static void thermal_zone_trip_update(struct thermal_zone_device *tz,
 				     int trip, long temp)
 {
-	struct thermal_cooling_device_instance *instance;
+	struct thermal_instance *instance;
 	struct thermal_cooling_device *cdev = NULL;
 	unsigned long cur_state, max_state;
 	long trip_temp;
-- 
1.7.9.5


  parent reply	other threads:[~2012-07-25  2:11 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-25  2:10 [PATCH RESEND 00/16] Thermal: generic thermal layer enhancement Zhang Rui
2012-07-25  2:10 ` [PATCH RESEND 01/16] Thermal: Make Thermal trip points writeable Zhang Rui
2012-07-25  3:18   ` Len Brown
2012-07-25  2:10 ` [PATCH RESEND 02/16] Thermal: Add Hysteresis attributes Zhang Rui
2012-07-25  3:19   ` Len Brown
2012-07-25  2:11 ` [PATCH RESEND 03/16] Thermal: Documentation update Zhang Rui
2012-07-25  2:11 ` [PATCH RESEND 04/16] Thermal: Introduce multiple cooling states support Zhang Rui
2012-07-25 20:06   ` Rafael J. Wysocki
2012-07-26  2:33     ` Zhang Rui
2012-07-25  2:11 ` [PATCH RESEND 05/16] Thermal: Introduce cooling states range support Zhang Rui
2012-07-25 20:08   ` Rafael J. Wysocki
2012-08-08 12:07   ` Valentin, Eduardo
2012-07-25  2:11 ` [PATCH RESEND 06/16] Thermal: set upper and lower limits Zhang Rui
2012-07-25 20:14   ` Rafael J. Wysocki
2012-08-08 12:50   ` Valentin, Eduardo
2012-07-25  2:11 ` [PATCH RESEND 07/16] Thermal: Introduce .get_trend() callback Zhang Rui
2012-07-25 20:19   ` Rafael J. Wysocki
2012-07-26  2:21     ` Zhang Rui
2012-07-25  2:11 ` [PATCH RESEND 08/16] Thermal: Remove tc1/tc2 in generic thermal layer Zhang Rui
2012-07-25 20:24   ` Rafael J. Wysocki
2012-07-26  2:23     ` Zhang Rui
2012-07-25  2:11 ` [PATCH RESEND 09/16] Thermal: Introduce thermal_zone_trip_update() Zhang Rui
2012-07-25 20:31   ` Rafael J. Wysocki
2012-07-26  2:25     ` Zhang Rui
2012-07-25  2:11 ` Zhang Rui [this message]
2012-07-25 20:32   ` [PATCH RESEND 10/16] Thermal: rename structure thermal_cooling_device_instance to thermal_instance Rafael J. Wysocki
2012-07-25  2:11 ` [PATCH RESEND 11/16] Thermal: Rename thermal_zone_device.cooling_devices Zhang Rui
2012-07-25 20:33   ` Rafael J. Wysocki
2012-07-25  2:11 ` [PATCH RESEND 12/16] Thermal: Rename thermal_instance.node to thermal_instance.tz_node Zhang Rui
2012-07-25 20:34   ` Rafael J. Wysocki
2012-07-25  2:11 ` [PATCH RESEND 13/16] Thermal: List thermal_instance in thermal_cooling_device Zhang Rui
2012-07-25 20:35   ` Rafael J. Wysocki
2012-07-25  2:11 ` [PATCH RESEND 14/16] Thermal: Introduce simple arbitrator for setting device cooling state Zhang Rui
2012-07-25 20:38   ` Rafael J. Wysocki
2012-07-25  2:11 ` [PATCH RESEND 15/16] Thermal: Unify the code for both active and passive cooling Zhang Rui
2012-07-25 20:41   ` Rafael J. Wysocki
2012-08-09  8:26   ` Valentin, Eduardo
2012-08-09  8:32     ` Zhang Rui
2012-07-25  2:11 ` [PATCH RESEND 16/16] Thermal: Introduce locking for cdev.thermal_instances list Zhang Rui
2012-07-25 18:54   ` Rafael J. Wysocki
2012-07-26  2:32     ` Zhang Rui

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1343182273-32096-11-git-send-email-rui.zhang@intel.com \
    --to=rui.zhang@intel.com \
    --cc=amit.kachhap@linaro.org \
    --cc=durgadoss.r@intel.com \
    --cc=eduardo.valentin@ti.com \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mjg@redhat.com \
    --cc=rjw@sisk.pl \
    --cc=wni@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).