From: Zhang Rui <rui.zhang@intel.com>
To: "Rafael J. Wysocki" <rjw@sisk.pl>,
Matthew Garrett <mjg@redhat.com>, Len Brown <lenb@kernel.org>,
R Durgadoss <durgadoss.r@intel.com>,
Eduardo Valentin <eduardo.valentin@ti.com>,
Amit Kachhap <amit.kachhap@linaro.org>, Wei Ni <wni@nvidia.com>,
Zhang Rui <rui.zhang@intel.com>
Cc: linux-acpi@vger.kernel.org, linux-pm@vger.kernel.org
Subject: [PATCH RESEND 12/16] Thermal: Rename thermal_instance.node to thermal_instance.tz_node.
Date: Wed, 25 Jul 2012 10:11:09 +0800 [thread overview]
Message-ID: <1343182273-32096-13-git-send-email-rui.zhang@intel.com> (raw)
In-Reply-To: <1343182273-32096-1-git-send-email-rui.zhang@intel.com>
thermal_instance should be referenced by both thermal zone devices
and thermal cooling devices.
Rename thermal_instance.node to thermal_instance.tz_node in this patch
and thermal_instanace.cdev_node will be introduced in next patch.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
---
drivers/thermal/thermal_sys.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
index 5f362e1..b76e55f 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_sys.c
@@ -56,7 +56,7 @@ struct thermal_instance {
unsigned long lower; /* Lowest cooling state for this trip point */
char attr_name[THERMAL_NAME_LENGTH];
struct device_attribute attr;
- struct list_head node;
+ struct list_head tz_node; /* node in tz->thermal_instances */
};
static DEFINE_IDR(thermal_tz_idr);
@@ -750,7 +750,7 @@ static void thermal_zone_device_passive(struct thermal_zone_device *tz,
/* Heating up? */
if (trend == THERMAL_TREND_RAISING) {
list_for_each_entry(instance, &tz->thermal_instances,
- node) {
+ tz_node) {
if (instance->trip != trip)
continue;
cdev = instance->cdev;
@@ -761,7 +761,7 @@ static void thermal_zone_device_passive(struct thermal_zone_device *tz,
}
} else if (trend == THERMAL_TREND_DROPPING) { /* Cooling off? */
list_for_each_entry(instance, &tz->thermal_instances,
- node) {
+ tz_node) {
if (instance->trip != trip)
continue;
cdev = instance->cdev;
@@ -781,7 +781,7 @@ static void thermal_zone_device_passive(struct thermal_zone_device *tz,
* and avoid thrashing around the passive trip point. Note that we
* assume symmetry.
*/
- list_for_each_entry(instance, &tz->thermal_instances, node) {
+ list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
if (instance->trip != trip)
continue;
cdev = instance->cdev;
@@ -877,13 +877,13 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
goto remove_symbol_link;
mutex_lock(&tz->lock);
- list_for_each_entry(pos, &tz->thermal_instances, node)
+ list_for_each_entry(pos, &tz->thermal_instances, tz_node)
if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) {
result = -EEXIST;
break;
}
if (!result)
- list_add_tail(&dev->node, &tz->thermal_instances);
+ list_add_tail(&dev->tz_node, &tz->thermal_instances);
mutex_unlock(&tz->lock);
if (!result)
@@ -916,9 +916,9 @@ int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz,
struct thermal_instance *pos, *next;
mutex_lock(&tz->lock);
- list_for_each_entry_safe(pos, next, &tz->thermal_instances, node) {
+ list_for_each_entry_safe(pos, next, &tz->thermal_instances, tz_node) {
if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) {
- list_del(&pos->node);
+ list_del(&pos->tz_node);
mutex_unlock(&tz->lock);
goto unbind;
}
@@ -1110,7 +1110,7 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz,
if (temp >= trip_temp) {
thermal_get_trend(tz, trip, &trend);
- list_for_each_entry(instance, &tz->thermal_instances, node) {
+ list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
if (instance->trip != trip)
continue;
@@ -1129,7 +1129,7 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz,
cdev->ops->set_cur_state(cdev, cur_state);
}
} else { /* below trip */
- list_for_each_entry(instance, &tz->thermal_instances, node) {
+ list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
if (instance->trip != trip)
continue;
--
1.7.9.5
next prev parent reply other threads:[~2012-07-25 2:11 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-25 2:10 [PATCH RESEND 00/16] Thermal: generic thermal layer enhancement Zhang Rui
2012-07-25 2:10 ` [PATCH RESEND 01/16] Thermal: Make Thermal trip points writeable Zhang Rui
2012-07-25 3:18 ` Len Brown
2012-07-25 2:10 ` [PATCH RESEND 02/16] Thermal: Add Hysteresis attributes Zhang Rui
2012-07-25 3:19 ` Len Brown
2012-07-25 2:11 ` [PATCH RESEND 03/16] Thermal: Documentation update Zhang Rui
2012-07-25 2:11 ` [PATCH RESEND 04/16] Thermal: Introduce multiple cooling states support Zhang Rui
2012-07-25 20:06 ` Rafael J. Wysocki
2012-07-26 2:33 ` Zhang Rui
2012-07-25 2:11 ` [PATCH RESEND 05/16] Thermal: Introduce cooling states range support Zhang Rui
2012-07-25 20:08 ` Rafael J. Wysocki
2012-08-08 12:07 ` Valentin, Eduardo
2012-07-25 2:11 ` [PATCH RESEND 06/16] Thermal: set upper and lower limits Zhang Rui
2012-07-25 20:14 ` Rafael J. Wysocki
2012-08-08 12:50 ` Valentin, Eduardo
2012-07-25 2:11 ` [PATCH RESEND 07/16] Thermal: Introduce .get_trend() callback Zhang Rui
2012-07-25 20:19 ` Rafael J. Wysocki
2012-07-26 2:21 ` Zhang Rui
2012-07-25 2:11 ` [PATCH RESEND 08/16] Thermal: Remove tc1/tc2 in generic thermal layer Zhang Rui
2012-07-25 20:24 ` Rafael J. Wysocki
2012-07-26 2:23 ` Zhang Rui
2012-07-25 2:11 ` [PATCH RESEND 09/16] Thermal: Introduce thermal_zone_trip_update() Zhang Rui
2012-07-25 20:31 ` Rafael J. Wysocki
2012-07-26 2:25 ` Zhang Rui
2012-07-25 2:11 ` [PATCH RESEND 10/16] Thermal: rename structure thermal_cooling_device_instance to thermal_instance Zhang Rui
2012-07-25 20:32 ` Rafael J. Wysocki
2012-07-25 2:11 ` [PATCH RESEND 11/16] Thermal: Rename thermal_zone_device.cooling_devices Zhang Rui
2012-07-25 20:33 ` Rafael J. Wysocki
2012-07-25 2:11 ` Zhang Rui [this message]
2012-07-25 20:34 ` [PATCH RESEND 12/16] Thermal: Rename thermal_instance.node to thermal_instance.tz_node Rafael J. Wysocki
2012-07-25 2:11 ` [PATCH RESEND 13/16] Thermal: List thermal_instance in thermal_cooling_device Zhang Rui
2012-07-25 20:35 ` Rafael J. Wysocki
2012-07-25 2:11 ` [PATCH RESEND 14/16] Thermal: Introduce simple arbitrator for setting device cooling state Zhang Rui
2012-07-25 20:38 ` Rafael J. Wysocki
2012-07-25 2:11 ` [PATCH RESEND 15/16] Thermal: Unify the code for both active and passive cooling Zhang Rui
2012-07-25 20:41 ` Rafael J. Wysocki
2012-08-09 8:26 ` Valentin, Eduardo
2012-08-09 8:32 ` Zhang Rui
2012-07-25 2:11 ` [PATCH RESEND 16/16] Thermal: Introduce locking for cdev.thermal_instances list Zhang Rui
2012-07-25 18:54 ` Rafael J. Wysocki
2012-07-26 2:32 ` Zhang Rui
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1343182273-32096-13-git-send-email-rui.zhang@intel.com \
--to=rui.zhang@intel.com \
--cc=amit.kachhap@linaro.org \
--cc=durgadoss.r@intel.com \
--cc=eduardo.valentin@ti.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mjg@redhat.com \
--cc=rjw@sisk.pl \
--cc=wni@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).