linux-acpi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Zhang Rui <rui.zhang@intel.com>
To: "Rafael J. Wysocki" <rjw@sisk.pl>,
	Matthew Garrett <mjg@redhat.com>, Len Brown <lenb@kernel.org>,
	R Durgadoss <durgadoss.r@intel.com>,
	Eduardo Valentin <eduardo.valentin@ti.com>,
	Amit Kachhap <amit.kachhap@linaro.org>, Wei Ni <wni@nvidia.com>,
	Zhang Rui <rui.zhang@intel.com>
Cc: linux-acpi@vger.kernel.org, linux-pm@vger.kernel.org
Subject: [PATCH V4 09/13] Thermal: Rename thermal_instance.node to thermal_instance.tz_node.
Date: Thu, 26 Jul 2012 16:41:19 +0800	[thread overview]
Message-ID: <1343292083-2047-10-git-send-email-rui.zhang@intel.com> (raw)
In-Reply-To: <1343292083-2047-1-git-send-email-rui.zhang@intel.com>

thermal_instance should be referenced by both thermal zone devices
and thermal cooling devices.

Rename thermal_instance.node to thermal_instance.tz_node in this patch
and thermal_instanace.cdev_node will be introduced in next patch.

Reviewed-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
---
 drivers/thermal/thermal_sys.c |   20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
index 112227e..b2a2d48 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_sys.c
@@ -56,7 +56,7 @@ struct thermal_instance {
 	unsigned long lower;	/* Lowest cooling state for this trip point */
 	char attr_name[THERMAL_NAME_LENGTH];
 	struct device_attribute attr;
-	struct list_head node;
+	struct list_head tz_node; /* node in tz->thermal_instances */
 };
 
 static DEFINE_IDR(thermal_tz_idr);
@@ -746,7 +746,7 @@ static void thermal_zone_device_passive(struct thermal_zone_device *tz,
 		/* Heating up? */
 		if (trend == THERMAL_TREND_RAISING) {
 			list_for_each_entry(instance, &tz->thermal_instances,
-					    node) {
+					    tz_node) {
 				if (instance->trip != trip)
 					continue;
 				cdev = instance->cdev;
@@ -757,7 +757,7 @@ static void thermal_zone_device_passive(struct thermal_zone_device *tz,
 			}
 		} else if (trend == THERMAL_TREND_DROPPING) { /* Cooling off? */
 			list_for_each_entry(instance, &tz->thermal_instances,
-					    node) {
+					    tz_node) {
 				if (instance->trip != trip)
 					continue;
 				cdev = instance->cdev;
@@ -777,7 +777,7 @@ static void thermal_zone_device_passive(struct thermal_zone_device *tz,
 	 * and avoid thrashing around the passive trip point.  Note that we
 	 * assume symmetry.
 	 */
-	list_for_each_entry(instance, &tz->thermal_instances, node) {
+	list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
 		if (instance->trip != trip)
 			continue;
 		cdev = instance->cdev;
@@ -873,13 +873,13 @@ int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz,
 		goto remove_symbol_link;
 
 	mutex_lock(&tz->lock);
-	list_for_each_entry(pos, &tz->thermal_instances, node)
+	list_for_each_entry(pos, &tz->thermal_instances, tz_node)
 	    if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) {
 		result = -EEXIST;
 		break;
 	}
 	if (!result)
-		list_add_tail(&dev->node, &tz->thermal_instances);
+		list_add_tail(&dev->tz_node, &tz->thermal_instances);
 	mutex_unlock(&tz->lock);
 
 	if (!result)
@@ -912,9 +912,9 @@ int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz,
 	struct thermal_instance *pos, *next;
 
 	mutex_lock(&tz->lock);
-	list_for_each_entry_safe(pos, next, &tz->thermal_instances, node) {
+	list_for_each_entry_safe(pos, next, &tz->thermal_instances, tz_node) {
 		if (pos->tz == tz && pos->trip == trip && pos->cdev == cdev) {
-			list_del(&pos->node);
+			list_del(&pos->tz_node);
 			mutex_unlock(&tz->lock);
 			goto unbind;
 		}
@@ -1117,7 +1117,7 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz,
 	}
 
 	if (temp >= trip_temp) {
-		list_for_each_entry(instance, &tz->thermal_instances, node) {
+		list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
 			if (instance->trip != trip)
 				continue;
 
@@ -1136,7 +1136,7 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz,
 			cdev->ops->set_cur_state(cdev, cur_state);
 		}
 	} else {	/* below trip */
-		list_for_each_entry(instance, &tz->thermal_instances, node) {
+		list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
 			if (instance->trip != trip)
 				continue;
 
-- 
1.7.9.5


  parent reply	other threads:[~2012-07-26  8:41 UTC|newest]

Thread overview: 45+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-26  8:41 [PATCH V4 00/13] Thermal: generic thermal layer enhancement Zhang Rui
2012-07-26  8:41 ` [PATCH V4 01/13] Thermal: Introduce multiple cooling states support Zhang Rui
2012-08-08 12:02   ` Valentin, Eduardo
2012-08-09  0:58     ` Zhang Rui
2012-07-26  8:41 ` [PATCH V4 02/13] Thermal: Introduce cooling states range support Zhang Rui
2012-08-20 15:51   ` Eduardo Valentin
2012-07-26  8:41 ` [PATCH V4 03/13] Thermal: set upper and lower limits Zhang Rui
2012-08-20 15:50   ` Eduardo Valentin
2012-07-26  8:41 ` [PATCH V4 04/13] Thermal: Introduce .get_trend() callback Zhang Rui
2012-07-26 20:11   ` Rafael J. Wysocki
2012-08-01  2:42     ` Zhang Rui
2012-08-08 13:46       ` Valentin, Eduardo
2012-08-08 13:44   ` Valentin, Eduardo
2012-07-26  8:41 ` [PATCH V4 05/13] Thermal: Remove tc1/tc2 in generic thermal layer Zhang Rui
2012-07-26 20:11   ` Rafael J. Wysocki
2012-08-08 14:06   ` Valentin, Eduardo
2012-08-09  0:57     ` Zhang Rui
2012-08-09  8:05       ` Valentin, Eduardo
2012-08-09 15:10       ` Valentin, Eduardo
2012-08-20 12:18         ` Eduardo Valentin
2012-08-21  0:49           ` Zhang Rui
2012-08-21 14:20             ` Eduardo Valentin
2012-07-26  8:41 ` [PATCH V4 06/13] Thermal: Introduce thermal_zone_trip_update() Zhang Rui
2012-07-26 20:12   ` Rafael J. Wysocki
2012-08-20 15:47   ` Eduardo Valentin
2012-08-20 15:48   ` Eduardo Valentin
2012-07-26  8:41 ` [PATCH V4 07/13] Thermal: rename structure thermal_cooling_device_instance to thermal_instance Zhang Rui
2012-08-20 15:47   ` Eduardo Valentin
2012-07-26  8:41 ` [PATCH V4 08/13] Thermal: Rename thermal_zone_device.cooling_devices Zhang Rui
2012-08-20 15:47   ` Eduardo Valentin
2012-07-26  8:41 ` Zhang Rui [this message]
2012-08-20 15:47   ` [PATCH V4 09/13] Thermal: Rename thermal_instance.node to thermal_instance.tz_node Eduardo Valentin
2012-07-26  8:41 ` [PATCH V4 10/13] Thermal: List thermal_instance in thermal_cooling_device Zhang Rui
2012-08-20 15:46   ` Eduardo Valentin
2012-07-26  8:41 ` [PATCH V4 11/13] Thermal: Introduce simple arbitrator for setting device cooling state Zhang Rui
2012-08-20 15:46   ` Eduardo Valentin
2012-07-26  8:41 ` [PATCH V4 12/13] Thermal: Unify the code for both active and passive cooling Zhang Rui
2012-08-20 15:45   ` Eduardo Valentin
2012-07-26  8:41 ` [PATCH V4 13/13] Thermal: Introduce locking for cdev.thermal_instances list Zhang Rui
2012-07-26 20:13   ` Rafael J. Wysocki
2012-08-20 15:45   ` Eduardo Valentin
2012-08-21  0:53     ` Zhang Rui
2012-08-21  5:01       ` Eduardo Valentin
2012-08-20 15:53 ` [PATCH V4 00/13] Thermal: generic thermal layer enhancement Eduardo Valentin
2012-08-21  5:10   ` Eduardo Valentin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1343292083-2047-10-git-send-email-rui.zhang@intel.com \
    --to=rui.zhang@intel.com \
    --cc=amit.kachhap@linaro.org \
    --cc=durgadoss.r@intel.com \
    --cc=eduardo.valentin@ti.com \
    --cc=lenb@kernel.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=mjg@redhat.com \
    --cc=rjw@sisk.pl \
    --cc=wni@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).