From: Zhang Rui <rui.zhang@intel.com>
To: "Rafael J. Wysocki" <rjw@sisk.pl>,
Matthew Garrett <mjg@redhat.com>, Len Brown <lenb@kernel.org>,
R Durgadoss <durgadoss.r@intel.com>,
Eduardo Valentin <eduardo.valentin@ti.com>,
Amit Kachhap <amit.kachhap@linaro.org>, Wei Ni <wni@nvidia.com>,
Zhang Rui <rui.zhang@intel.com>
Cc: linux-acpi@vger.kernel.org, linux-pm@vger.kernel.org
Subject: [PATCH V4 05/13] Thermal: Remove tc1/tc2 in generic thermal layer.
Date: Thu, 26 Jul 2012 16:41:15 +0800 [thread overview]
Message-ID: <1343292083-2047-6-git-send-email-rui.zhang@intel.com> (raw)
In-Reply-To: <1343292083-2047-1-git-send-email-rui.zhang@intel.com>
Remove tc1/tc2 in generic thermal layer.
.get_trend() callback starts to take effect from this patch.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
---
drivers/acpi/thermal.c | 5 +----
drivers/platform/x86/acerhdf.c | 2 +-
drivers/platform/x86/intel_mid_thermal.c | 2 +-
drivers/thermal/spear_thermal.c | 2 +-
drivers/thermal/thermal_sys.c | 24 ++++++------------------
include/linux/thermal.h | 5 +----
6 files changed, 11 insertions(+), 29 deletions(-)
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 0c49e42..0c755d2 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -895,15 +895,12 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
tz->thermal_zone =
thermal_zone_device_register("acpitz", trips, 0, tz,
&acpi_thermal_zone_ops,
- tz->trips.passive.tc1,
- tz->trips.passive.tc2,
tz->trips.passive.tsp*100,
tz->polling_frequency*100);
else
tz->thermal_zone =
thermal_zone_device_register("acpitz", trips, 0, tz,
- &acpi_thermal_zone_ops,
- 0, 0, 0,
+ &acpi_thermal_zone_ops, 0,
tz->polling_frequency*100);
if (IS_ERR(tz->thermal_zone))
return -ENODEV;
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
index a207466..84c5688 100644
--- a/drivers/platform/x86/acerhdf.c
+++ b/drivers/platform/x86/acerhdf.c
@@ -662,7 +662,7 @@ static int acerhdf_register_thermal(void)
return -EINVAL;
thz_dev = thermal_zone_device_register("acerhdf", 1, 0, NULL,
- &acerhdf_dev_ops, 0, 0, 0,
+ &acerhdf_dev_ops, 0,
(kernelmode) ? interval*1000 : 0);
if (IS_ERR(thz_dev))
return -EINVAL;
diff --git a/drivers/platform/x86/intel_mid_thermal.c b/drivers/platform/x86/intel_mid_thermal.c
index 2b2c212..6e309dd 100644
--- a/drivers/platform/x86/intel_mid_thermal.c
+++ b/drivers/platform/x86/intel_mid_thermal.c
@@ -499,7 +499,7 @@ static int mid_thermal_probe(struct platform_device *pdev)
goto err;
}
pinfo->tzd[i] = thermal_zone_device_register(name[i],
- 0, 0, td_info, &tzd_ops, 0, 0, 0, 0);
+ 0, 0, td_info, &tzd_ops, 0, 0);
if (IS_ERR(pinfo->tzd[i])) {
kfree(td_info);
ret = PTR_ERR(pinfo->tzd[i]);
diff --git a/drivers/thermal/spear_thermal.c b/drivers/thermal/spear_thermal.c
index 69a55d4..b55840a 100644
--- a/drivers/thermal/spear_thermal.c
+++ b/drivers/thermal/spear_thermal.c
@@ -148,7 +148,7 @@ static int spear_thermal_probe(struct platform_device *pdev)
writel_relaxed(stdev->flags, stdev->thermal_base);
spear_thermal = thermal_zone_device_register("spear_thermal", 0, 0,
- stdev, &ops, 0, 0, 0, 0);
+ stdev, &ops, 0, 0);
if (IS_ERR(spear_thermal)) {
dev_err(&pdev->dev, "thermal zone device is NULL\n");
ret = PTR_ERR(spear_thermal);
diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
index 68c93d4..a70ed4c 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_sys.c
@@ -335,9 +335,6 @@ passive_store(struct device *dev, struct device_attribute *attr,
tz->passive_delay = 0;
}
- tz->tc1 = 1;
- tz->tc2 = 1;
-
tz->forced_passive = state;
thermal_zone_device_update(tz);
@@ -718,13 +715,12 @@ static void thermal_zone_device_set_polling(struct thermal_zone_device *tz,
static void thermal_zone_device_passive(struct thermal_zone_device *tz,
int temp, int trip_temp, int trip)
{
- int trend = 0;
+ enum thermal_trend trend;
struct thermal_cooling_device_instance *instance;
struct thermal_cooling_device *cdev;
long state, max_state;
- if (!tz->ops->get_trend ||
- tz->ops->get_trend(tz, trip, (enum thermal_trend *)&trend)) {
+ if (!tz->ops->get_trend || tz->ops->get_trend(tz, trip, &trend)) {
/*
* compare the current temperature and previous temperature
* to get the thermal trend, if no special requirement
@@ -747,11 +743,8 @@ static void thermal_zone_device_passive(struct thermal_zone_device *tz,
if (temp >= trip_temp) {
tz->passive = true;
- trend = (tz->tc1 * (temp - tz->last_temperature)) +
- (tz->tc2 * (temp - trip_temp));
-
/* Heating up? */
- if (trend > 0) {
+ if (trend == THERMAL_TREND_RAISING) {
list_for_each_entry(instance, &tz->cooling_devices,
node) {
if (instance->trip != trip)
@@ -762,7 +755,7 @@ static void thermal_zone_device_passive(struct thermal_zone_device *tz,
if (state++ < max_state)
cdev->ops->set_cur_state(cdev, state);
}
- } else if (trend < 0) { /* Cooling off? */
+ } else if (trend == THERMAL_TREND_DROPPING) { /* Cooling off? */
list_for_each_entry(instance, &tz->cooling_devices,
node) {
if (instance->trip != trip)
@@ -1288,8 +1281,6 @@ static void remove_trip_attrs(struct thermal_zone_device *tz)
* @mask: a bit string indicating the writeablility of trip points
* @devdata: private device data
* @ops: standard thermal zone device callbacks
- * @tc1: thermal coefficient 1 for passive calculations
- * @tc2: thermal coefficient 2 for passive calculations
* @passive_delay: number of milliseconds to wait between polls when
* performing passive cooling
* @polling_delay: number of milliseconds to wait between polls when checking
@@ -1297,13 +1288,12 @@ static void remove_trip_attrs(struct thermal_zone_device *tz)
* driven systems)
*
* thermal_zone_device_unregister() must be called when the device is no
- * longer needed. The passive cooling formula uses tc1 and tc2 as described in
- * section 11.1.5.1 of the ACPI specification 3.0.
+ * longer needed. The passive cooling depends on the .get_trend() return value.
*/
struct thermal_zone_device *thermal_zone_device_register(char *type,
int trips, int mask, void *devdata,
const struct thermal_zone_device_ops *ops,
- int tc1, int tc2, int passive_delay, int polling_delay)
+ int passive_delay, int polling_delay)
{
struct thermal_zone_device *tz;
struct thermal_cooling_device *pos;
@@ -1339,8 +1329,6 @@ struct thermal_zone_device *thermal_zone_device_register(char *type,
tz->device.class = &thermal_class;
tz->devdata = devdata;
tz->trips = trips;
- tz->tc1 = tc1;
- tz->tc2 = tc2;
tz->passive_delay = passive_delay;
tz->polling_delay = polling_delay;
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index a01e3e6..d18dcf6 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -115,8 +115,6 @@ struct thermal_zone_device {
struct thermal_attr *trip_hyst_attrs;
void *devdata;
int trips;
- int tc1;
- int tc2;
int passive_delay;
int polling_delay;
int temperature;
@@ -163,8 +161,7 @@ enum {
#define THERMAL_GENL_CMD_MAX (__THERMAL_GENL_CMD_MAX - 1)
struct thermal_zone_device *thermal_zone_device_register(char *, int, int,
- void *, const struct thermal_zone_device_ops *, int tc1,
- int tc2, int passive_freq, int polling_freq);
+ void *, const struct thermal_zone_device_ops *, int, int);
void thermal_zone_device_unregister(struct thermal_zone_device *);
int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int,
--
1.7.9.5
next prev parent reply other threads:[~2012-07-26 8:41 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-26 8:41 [PATCH V4 00/13] Thermal: generic thermal layer enhancement Zhang Rui
2012-07-26 8:41 ` [PATCH V4 01/13] Thermal: Introduce multiple cooling states support Zhang Rui
2012-08-08 12:02 ` Valentin, Eduardo
2012-08-09 0:58 ` Zhang Rui
2012-07-26 8:41 ` [PATCH V4 02/13] Thermal: Introduce cooling states range support Zhang Rui
2012-08-20 15:51 ` Eduardo Valentin
2012-07-26 8:41 ` [PATCH V4 03/13] Thermal: set upper and lower limits Zhang Rui
2012-08-20 15:50 ` Eduardo Valentin
2012-07-26 8:41 ` [PATCH V4 04/13] Thermal: Introduce .get_trend() callback Zhang Rui
2012-07-26 20:11 ` Rafael J. Wysocki
2012-08-01 2:42 ` Zhang Rui
2012-08-08 13:46 ` Valentin, Eduardo
2012-08-08 13:44 ` Valentin, Eduardo
2012-07-26 8:41 ` Zhang Rui [this message]
2012-07-26 20:11 ` [PATCH V4 05/13] Thermal: Remove tc1/tc2 in generic thermal layer Rafael J. Wysocki
2012-08-08 14:06 ` Valentin, Eduardo
2012-08-09 0:57 ` Zhang Rui
2012-08-09 8:05 ` Valentin, Eduardo
2012-08-09 15:10 ` Valentin, Eduardo
2012-08-20 12:18 ` Eduardo Valentin
2012-08-21 0:49 ` Zhang Rui
2012-08-21 14:20 ` Eduardo Valentin
2012-07-26 8:41 ` [PATCH V4 06/13] Thermal: Introduce thermal_zone_trip_update() Zhang Rui
2012-07-26 20:12 ` Rafael J. Wysocki
2012-08-20 15:47 ` Eduardo Valentin
2012-08-20 15:48 ` Eduardo Valentin
2012-07-26 8:41 ` [PATCH V4 07/13] Thermal: rename structure thermal_cooling_device_instance to thermal_instance Zhang Rui
2012-08-20 15:47 ` Eduardo Valentin
2012-07-26 8:41 ` [PATCH V4 08/13] Thermal: Rename thermal_zone_device.cooling_devices Zhang Rui
2012-08-20 15:47 ` Eduardo Valentin
2012-07-26 8:41 ` [PATCH V4 09/13] Thermal: Rename thermal_instance.node to thermal_instance.tz_node Zhang Rui
2012-08-20 15:47 ` Eduardo Valentin
2012-07-26 8:41 ` [PATCH V4 10/13] Thermal: List thermal_instance in thermal_cooling_device Zhang Rui
2012-08-20 15:46 ` Eduardo Valentin
2012-07-26 8:41 ` [PATCH V4 11/13] Thermal: Introduce simple arbitrator for setting device cooling state Zhang Rui
2012-08-20 15:46 ` Eduardo Valentin
2012-07-26 8:41 ` [PATCH V4 12/13] Thermal: Unify the code for both active and passive cooling Zhang Rui
2012-08-20 15:45 ` Eduardo Valentin
2012-07-26 8:41 ` [PATCH V4 13/13] Thermal: Introduce locking for cdev.thermal_instances list Zhang Rui
2012-07-26 20:13 ` Rafael J. Wysocki
2012-08-20 15:45 ` Eduardo Valentin
2012-08-21 0:53 ` Zhang Rui
2012-08-21 5:01 ` Eduardo Valentin
2012-08-20 15:53 ` [PATCH V4 00/13] Thermal: generic thermal layer enhancement Eduardo Valentin
2012-08-21 5:10 ` Eduardo Valentin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1343292083-2047-6-git-send-email-rui.zhang@intel.com \
--to=rui.zhang@intel.com \
--cc=amit.kachhap@linaro.org \
--cc=durgadoss.r@intel.com \
--cc=eduardo.valentin@ti.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=mjg@redhat.com \
--cc=rjw@sisk.pl \
--cc=wni@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).