From: Seth Forshee <seth.forshee@canonical.com>
To: linux-kernel@vger.kernel.org, linux-acpi@vger.kernel.org, x86@kernel.org
Cc: Joerg Roedel <joro@8bytes.org>,
Thomas Gleixner <tglx@linutronix.de>,
Ingo Molnar <mingo@redhat.com>, "H. Peter Anvin" <hpa@zytor.com>,
Len Brown <lenb@kernel.org>, Joerg Roedel <joerg.roedel@amd.com>,
Suresh Siddha <suresh.b.siddha@intel.com>,
Yinghai Lu <yinghai@kernel.org>
Subject: [PATCH v3] irq_remap: disable IRQ remapping if any IOAPIC lacks an IOMMU
Date: Wed, 8 Aug 2012 08:27:03 -0500 [thread overview]
Message-ID: <1344432423-26495-1-git-send-email-seth.forshee@canonical.com> (raw)
In-Reply-To: <CAE9FiQVEsPisVUKeG0aejKzvS+Csp5Ca2KEQyy6ZJW-MR-VFUA@mail.gmail.com>
The ACPI tables in the Macbook Air 5,1 define a single IOAPIC with id 2,
but the only remapping unit described in the DMAR table matches id 0.
Interrupt remapping fails as a result, and the kernel panics with the
message "timer doesn't work through Interrupt-remapped IO-APIC."
To fix this, check each IOAPIC for a corresponding IOMMU. If an IOMMU is
not found, do not allow IRQ remapping to be enabled.
v2: Move check to parse_ioapics_under_ir(), raise log level to KERN_ERR,
and add FW_BUG to the log message
v3: Skip check if IOMMU doesn't support interrupt remapping and remove
existing check that the IOMMU count equals the IOAPIC count
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
---
drivers/iommu/intel_irq_remapping.c | 18 +++++++++++++-----
1 file changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/iommu/intel_irq_remapping.c b/drivers/iommu/intel_irq_remapping.c
index e0b18f3..af8904d 100644
--- a/drivers/iommu/intel_irq_remapping.c
+++ b/drivers/iommu/intel_irq_remapping.c
@@ -736,6 +736,7 @@ int __init parse_ioapics_under_ir(void)
{
struct dmar_drhd_unit *drhd;
int ir_supported = 0;
+ int ioapic_idx;
for_each_drhd_unit(drhd) {
struct intel_iommu *iommu = drhd->iommu;
@@ -748,13 +749,20 @@ int __init parse_ioapics_under_ir(void)
}
}
- if (ir_supported && ir_ioapic_num != nr_ioapics) {
- printk(KERN_WARNING
- "Not all IO-APIC's listed under remapping hardware\n");
- return -1;
+ if (!ir_supported)
+ return 0;
+
+ for (ioapic_idx = 0; ioapic_idx < nr_ioapics; ioapic_idx++) {
+ int ioapic_id = mpc_ioapic_id(ioapic_idx);
+ if (!map_ioapic_to_ir(ioapic_id)) {
+ pr_err(FW_BUG "ioapic %d has no mapping iommu, "
+ "interrupt remapping will be disabled\n",
+ ioapic_id);
+ return -1;
+ }
}
- return ir_supported;
+ return 1;
}
int __init ir_dev_scope_init(void)
--
1.7.9.5
next prev parent reply other threads:[~2012-08-08 13:27 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-07 19:48 IRQ remapping problem on Macbook Air 5,1 Seth Forshee
2012-08-07 20:10 ` Joerg Roedel
2012-08-07 20:47 ` Suresh Siddha
2012-08-07 20:55 ` Seth Forshee
2012-08-07 20:53 ` Suresh Siddha
2012-08-07 20:48 ` [PATCH] irq_remap: disable IRQ remapping if any IOAPIC lacks an IOMMU Seth Forshee
2012-08-07 20:50 ` Suresh Siddha
2012-08-07 21:04 ` Joerg Roedel
2012-08-07 21:39 ` [PATCH v2] " Seth Forshee
2012-08-07 22:04 ` Yinghai Lu
2012-08-08 13:27 ` Seth Forshee [this message]
2012-08-08 17:57 ` [PATCH v3] " Yinghai Lu
2012-08-08 21:33 ` Seth Forshee
2012-08-10 9:32 ` Joerg Roedel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1344432423-26495-1-git-send-email-seth.forshee@canonical.com \
--to=seth.forshee@canonical.com \
--cc=hpa@zytor.com \
--cc=joerg.roedel@amd.com \
--cc=joro@8bytes.org \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@redhat.com \
--cc=suresh.b.siddha@intel.com \
--cc=tglx@linutronix.de \
--cc=x86@kernel.org \
--cc=yinghai@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).