From: Durgadoss R <durgadoss.r@intel.com>
To: lenb@kernel.org, rui.zhang@intel.com
Cc: linux-acpi@vger.kernel.org, eduardo.valentin@ti.com,
Durgadoss R <durgadoss.r@intel.com>
Subject: [PATCHv4 13/15] Thermal: Remove throttling logic out of thermal_sys.c
Date: Tue, 18 Sep 2012 11:05:04 +0530 [thread overview]
Message-ID: <1347946506-18449-14-git-send-email-durgadoss.r@intel.com> (raw)
In-Reply-To: <1347946506-18449-1-git-send-email-durgadoss.r@intel.com>
This patch removes the throttling logic out of
thermal_sys.c; also refactors the code into smaller
functions so that are easy to read/maintain.
* Seperates the handling of critical and non-critical trips
* Re-arranges the set_polling and device_check methods, so
that all related functions are arranged in one place.
* Removes the 'do_update' and 'trip_update' method, as part
of moving the throttling logic out of thermal_sys.c
Signed-off-by: Durgadoss R <durgadoss.r@intel.com>
---
drivers/thermal/thermal_sys.c | 313 +++++++++++++++--------------------------
1 file changed, 112 insertions(+), 201 deletions(-)
diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
index eebd11d..cde613b 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_sys.c
@@ -306,6 +306,118 @@ exit:
mutex_unlock(&thermal_list_lock);
}
+static void thermal_zone_device_set_polling(struct thermal_zone_device *tz,
+ int delay)
+{
+ cancel_delayed_work(&(tz->poll_queue));
+
+ if (!delay)
+ return;
+
+ if (delay > 1000)
+ queue_delayed_work(system_freezable_wq, &(tz->poll_queue),
+ round_jiffies(msecs_to_jiffies(delay)));
+ else
+ queue_delayed_work(system_freezable_wq, &(tz->poll_queue),
+ msecs_to_jiffies(delay));
+}
+
+static void monitor_thermal_zone(struct thermal_zone_device *tz)
+{
+ mutex_lock(&tz->lock);
+
+ if (tz->passive)
+ thermal_zone_device_set_polling(tz, tz->passive_delay);
+ else if (tz->polling_delay)
+ thermal_zone_device_set_polling(tz, tz->polling_delay);
+ else
+ thermal_zone_device_set_polling(tz, 0);
+
+ mutex_unlock(&tz->lock);
+}
+
+static void handle_non_critical_trips(struct thermal_zone_device *tz,
+ int trip, enum thermal_trip_type trip_type)
+{
+ tz->governor->throttle(tz, trip);
+}
+
+static void handle_critical_trips(struct thermal_zone_device *tz,
+ int trip, enum thermal_trip_type trip_type)
+{
+ long trip_temp;
+
+ tz->ops->get_trip_temp(tz, trip, &trip_temp);
+
+ /* If we have not crossed the trip_temp, we do not care. */
+ if (tz->temperature < trip_temp)
+ return;
+
+ if (tz->ops->notify)
+ tz->ops->notify(tz, trip, trip_type);
+
+ if (trip_type == THERMAL_TRIP_CRITICAL) {
+ pr_emerg("Critical temperature reached(%d C),shutting down\n",
+ tz->temperature / 1000);
+ orderly_poweroff(true);
+ }
+}
+
+static void handle_thermal_trip(struct thermal_zone_device *tz, int trip)
+{
+ enum thermal_trip_type type;
+
+ tz->ops->get_trip_type(tz, trip, &type);
+
+ if (type == THERMAL_TRIP_CRITICAL || type == THERMAL_TRIP_HOT)
+ handle_critical_trips(tz, trip, type);
+ else
+ handle_non_critical_trips(tz, trip, type);
+ /*
+ * Alright, we handled this trip successfully.
+ * So, start monitoring again.
+ */
+ monitor_thermal_zone(tz);
+}
+
+static void update_temperature(struct thermal_zone_device *tz)
+{
+ long temp;
+ int ret;
+
+ mutex_lock(&tz->lock);
+
+ ret = tz->ops->get_temp(tz, &temp);
+ if (ret) {
+ pr_warn("failed to read out thermal zone %d\n", tz->id);
+ return;
+ }
+
+ tz->last_temperature = tz->temperature;
+ tz->temperature = temp;
+
+ mutex_unlock(&tz->lock);
+}
+
+void thermal_zone_device_update(struct thermal_zone_device *tz)
+{
+ int count;
+
+ update_temperature(tz);
+
+ for (count = 0; count < tz->trips; count++)
+ handle_thermal_trip(tz, count);
+}
+EXPORT_SYMBOL(thermal_zone_device_update);
+
+static void thermal_zone_device_check(struct work_struct *work)
+{
+ struct thermal_zone_device *tz = container_of(work, struct
+ thermal_zone_device,
+ poll_queue.work);
+ thermal_zone_device_update(tz);
+}
+
/* sys I/F for thermal zone */
#define to_thermal_zone(_dev) \
@@ -936,30 +1048,6 @@ thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz)
}
#endif
-static void thermal_zone_device_set_polling(struct thermal_zone_device *tz,
- int delay)
-{
- cancel_delayed_work(&(tz->poll_queue));
-
- if (!delay)
- return;
-
- if (delay > 1000)
- queue_delayed_work(system_freezable_wq, &(tz->poll_queue),
- round_jiffies(msecs_to_jiffies(delay)));
- else
- queue_delayed_work(system_freezable_wq, &(tz->poll_queue),
- msecs_to_jiffies(delay));
-}
-
-static void thermal_zone_device_check(struct work_struct *work)
-{
- struct thermal_zone_device *tz = container_of(work, struct
- thermal_zone_device,
- poll_queue.work);
- thermal_zone_device_update(tz);
-}
-
/**
* thermal_zone_bind_cooling_device - bind a cooling device to a thermal zone
* @tz: thermal zone device
@@ -1283,183 +1371,6 @@ void thermal_cdev_update(struct thermal_cooling_device *cdev)
}
EXPORT_SYMBOL(thermal_cdev_update);
-static void thermal_zone_do_update(struct thermal_zone_device *tz)
-{
- struct thermal_instance *instance;
-
- list_for_each_entry(instance, &tz->thermal_instances, tz_node)
- thermal_cdev_update(instance->cdev);
-}
-
-/*
- * Cooling algorithm for both active and passive cooling
- *
- * 1. if the temperature is higher than a trip point,
- * a. if the trend is THERMAL_TREND_RAISING, use higher cooling
- * state for this trip point
- * b. if the trend is THERMAL_TREND_DROPPING, use lower cooling
- * state for this trip point
- *
- * 2. if the temperature is lower than a trip point, use lower
- * cooling state for this trip point
- *
- * Note that this behaves the same as the previous passive cooling
- * algorithm.
- */
-
-static void thermal_zone_trip_update(struct thermal_zone_device *tz,
- int trip, long temp)
-{
- struct thermal_instance *instance;
- struct thermal_cooling_device *cdev = NULL;
- unsigned long cur_state, max_state;
- long trip_temp;
- enum thermal_trip_type trip_type;
- enum thermal_trend trend;
-
- if (trip == THERMAL_TRIPS_NONE) {
- trip_temp = tz->forced_passive;
- trip_type = THERMAL_TRIPS_NONE;
- } else {
- tz->ops->get_trip_temp(tz, trip, &trip_temp);
- tz->ops->get_trip_type(tz, trip, &trip_type);
- }
-
- if (!tz->ops->get_trend || tz->ops->get_trend(tz, trip, &trend)) {
- /*
- * compare the current temperature and previous temperature
- * to get the thermal trend, if no special requirement
- */
- if (tz->temperature > tz->last_temperature)
- trend = THERMAL_TREND_RAISING;
- else if (tz->temperature < tz->last_temperature)
- trend = THERMAL_TREND_DROPPING;
- else
- trend = THERMAL_TREND_STABLE;
- }
-
- if (temp >= trip_temp) {
- list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
- if (instance->trip != trip)
- continue;
-
- cdev = instance->cdev;
-
- cdev->ops->get_cur_state(cdev, &cur_state);
- cdev->ops->get_max_state(cdev, &max_state);
-
- if (trend == THERMAL_TREND_RAISING) {
- cur_state = cur_state < instance->upper ?
- (cur_state + 1) : instance->upper;
- } else if (trend == THERMAL_TREND_DROPPING) {
- cur_state = cur_state > instance->lower ?
- (cur_state - 1) : instance->lower;
- }
-
- /* activate a passive thermal instance */
- if ((trip_type == THERMAL_TRIP_PASSIVE ||
- trip_type == THERMAL_TRIPS_NONE) &&
- instance->target == THERMAL_NO_TARGET)
- tz->passive++;
-
- instance->target = cur_state;
- cdev->updated = false; /* cooling device needs update */
- }
- } else { /* below trip */
- list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
- if (instance->trip != trip)
- continue;
-
- /* Do not use the inactive thermal instance */
- if (instance->target == THERMAL_NO_TARGET)
- continue;
- cdev = instance->cdev;
- cdev->ops->get_cur_state(cdev, &cur_state);
-
- cur_state = cur_state > instance->lower ?
- (cur_state - 1) : THERMAL_NO_TARGET;
-
- /* deactivate a passive thermal instance */
- if ((trip_type == THERMAL_TRIP_PASSIVE ||
- trip_type == THERMAL_TRIPS_NONE) &&
- cur_state == THERMAL_NO_TARGET)
- tz->passive--;
- instance->target = cur_state;
- cdev->updated = false; /* cooling device needs update */
- }
- }
-
- return;
-}
-/**
- * thermal_zone_device_update - force an update of a thermal zone's state
- * @ttz: the thermal zone to update
- */
-
-void thermal_zone_device_update(struct thermal_zone_device *tz)
-{
- int count, ret = 0;
- long temp, trip_temp;
- enum thermal_trip_type trip_type;
-
- mutex_lock(&tz->lock);
-
- if (tz->ops->get_temp(tz, &temp)) {
- /* get_temp failed - retry it later */
- pr_warn("failed to read out thermal zone %d\n", tz->id);
- goto leave;
- }
-
- tz->last_temperature = tz->temperature;
- tz->temperature = temp;
-
- for (count = 0; count < tz->trips; count++) {
- tz->ops->get_trip_type(tz, count, &trip_type);
- tz->ops->get_trip_temp(tz, count, &trip_temp);
-
- switch (trip_type) {
- case THERMAL_TRIP_CRITICAL:
- if (temp >= trip_temp) {
- if (tz->ops->notify)
- ret = tz->ops->notify(tz, count,
- trip_type);
- if (!ret) {
- pr_emerg("Critical temperature reached (%ld C), shutting down\n",
- temp/1000);
- orderly_poweroff(true);
- }
- }
- break;
- case THERMAL_TRIP_HOT:
- if (temp >= trip_temp)
- if (tz->ops->notify)
- tz->ops->notify(tz, count, trip_type);
- break;
- case THERMAL_TRIP_ACTIVE:
- thermal_zone_trip_update(tz, count, temp);
- break;
- case THERMAL_TRIP_PASSIVE:
- if (temp >= trip_temp || tz->passive)
- thermal_zone_trip_update(tz, count, temp);
- break;
- }
- }
-
- if (tz->forced_passive)
- thermal_zone_trip_update(tz, THERMAL_TRIPS_NONE, temp);
- thermal_zone_do_update(tz);
-
-leave:
- if (tz->passive)
- thermal_zone_device_set_polling(tz, tz->passive_delay);
- else if (tz->polling_delay)
- thermal_zone_device_set_polling(tz, tz->polling_delay);
- else
- thermal_zone_device_set_polling(tz, 0);
- mutex_unlock(&tz->lock);
-}
-EXPORT_SYMBOL(thermal_zone_device_update);
-
/**
* create_trip_attrs - create attributes for trip points
* @tz: the thermal zone device
--
1.7.9.5
next prev parent reply other threads:[~2012-09-18 5:36 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-18 5:34 [PATCHv4 00/15] Thermal_framework_enhancements Durgadoss R
2012-09-18 5:34 ` [PATCHv4 01/15] Thermal: Refactor thermal.h file Durgadoss R
2012-09-18 5:34 ` [PATCHv4 02/15] Thermal: Move thermal_instance to thermal_core.h Durgadoss R
2012-09-18 5:34 ` [PATCHv4 03/15] Thermal: Add get trend, get instance API's to thermal_sys Durgadoss R
2012-09-18 5:34 ` [PATCHv4 04/15] Thermal: Add platform level information to thermal.h Durgadoss R
2012-09-21 7:12 ` Zhang Rui
2012-09-21 8:07 ` R, Durgadoss
2012-09-24 5:43 ` Zhang Rui
2012-09-18 5:34 ` [PATCHv4 05/15] Thermal: Pass zone parameters as argument to tzd_register Durgadoss R
2012-09-18 5:34 ` [PATCHv4 06/15] Thermal: Add thermal governor registration APIs Durgadoss R
2012-09-18 5:34 ` [PATCHv4 07/15] Thermal: Add a policy sysfs attribute Durgadoss R
2012-09-21 8:07 ` Zhang Rui
2012-09-21 8:09 ` R, Durgadoss
2012-09-24 5:44 ` Zhang Rui
2012-09-18 5:34 ` [PATCHv4 08/15] Thermal: Update binding logic based on platform data Durgadoss R
2012-09-18 5:35 ` [PATCHv4 09/15] Thermal: Make thermal_cdev_update as a global function Durgadoss R
2012-09-18 5:35 ` [PATCHv4 10/15] Thermal: Introduce fair_share thermal governor Durgadoss R
2012-09-18 5:35 ` [PATCHv4 11/15] Thermal: Introduce a step_wise " Durgadoss R
2012-09-18 7:13 ` Zhang Rui
2012-09-18 8:11 ` R, Durgadoss
2012-09-18 8:22 ` Zhang Rui
2012-09-18 8:32 ` R, Durgadoss
2012-09-18 5:35 ` [PATCHv4 12/15] Thermal: Add a thermal notifier for user space Durgadoss R
2012-09-18 5:35 ` Durgadoss R [this message]
2012-09-18 5:35 ` [PATCHv4 14/15] Thermal: Add a notification API Durgadoss R
2012-09-18 5:35 ` [PATCHv4 15/15] Thermal: Add documentation for platform layer data Durgadoss R
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1347946506-18449-14-git-send-email-durgadoss.r@intel.com \
--to=durgadoss.r@intel.com \
--cc=eduardo.valentin@ti.com \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=rui.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).