linux-acpi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Huang Ying <ying.huang@intel.com>
To: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: linux-acpi@vger.kernel.org, Tony Luck <tony.luck@intel.com>,
	Linux Edac Mailing List <linux-edac@vger.kernel.org>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH EDAC 03/13] ghes: add the needed hooks for EDAC error report
Date: Thu, 21 Feb 2013 09:26:07 +0800	[thread overview]
Message-ID: <1361409967.7093.20.camel@yhuang-dev> (raw)
In-Reply-To: <a6aaff7d219b878ca655fde3757ecd0170caec2c.1360931635.git.mchehab@redhat.com>

Sorry for late!

On Fri, 2013-02-15 at 10:44 -0200, Mauro Carvalho Chehab wrote:
> In order to allow reporting errors via EDAC, add hooks for:
> 
> 1) register an EDAC driver;
> 2) unregister an EDAC driver;
> 3) report errors via EDAC.
> 
> As the EDAC driver will need to access the ghes structure, adds it
> as one of the parameters for ghes_do_proc.
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
> ---
>  drivers/acpi/apei/ghes.c | 17 ++++++++++++++---
>  include/acpi/ghes.h      | 27 +++++++++++++++++++++++++++
>  2 files changed, 41 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c
> index 6d0e146..a21d7da 100644
> --- a/drivers/acpi/apei/ghes.c
> +++ b/drivers/acpi/apei/ghes.c
> @@ -409,7 +409,8 @@ static void ghes_clear_estatus(struct ghes *ghes)
>  	ghes->flags &= ~GHES_TO_CLEAR;
>  }
>  
> -static void ghes_do_proc(const struct acpi_hest_generic_status *estatus)
> +static void ghes_do_proc(struct ghes *ghes,
> +			 const struct acpi_hest_generic_status *estatus)
>  {
>  	int sev, sec_sev;
>  	struct acpi_hest_generic_data *gdata;
> @@ -421,6 +422,8 @@ static void ghes_do_proc(const struct acpi_hest_generic_status *estatus)
>  				 CPER_SEC_PLATFORM_MEM)) {
>  			struct cper_sec_mem_err *mem_err;
>  			mem_err = (struct cper_sec_mem_err *)(gdata+1);
> +			ghes_edac_report_mem_error(ghes, sev, mem_err);
> +
>  #ifdef CONFIG_X86_MCE
>  			apei_mce_report_mem_error(sev == GHES_SEV_CORRECTED,
>  						  mem_err);
> @@ -639,7 +642,7 @@ static int ghes_proc(struct ghes *ghes)
>  		if (ghes_print_estatus(NULL, ghes->generic, ghes->estatus))
>  			ghes_estatus_cache_add(ghes->generic, ghes->estatus);
>  	}
> -	ghes_do_proc(ghes->estatus);
> +	ghes_do_proc(ghes, ghes->estatus);
>  out:
>  	ghes_clear_estatus(ghes);
>  	return 0;
> @@ -732,7 +735,7 @@ static void ghes_proc_in_irq(struct irq_work *irq_work)
>  		estatus = GHES_ESTATUS_FROM_NODE(estatus_node);
>  		len = apei_estatus_len(estatus);
>  		node_len = GHES_ESTATUS_NODE_LEN(len);
> -		ghes_do_proc(estatus);
> +		ghes_do_proc(estatus_node->ghes, estatus);
>  		if (!ghes_estatus_cached(estatus)) {
>  			generic = estatus_node->generic;
>  			if (ghes_print_estatus(NULL, generic, estatus))
> @@ -821,6 +824,7 @@ static int ghes_notify_nmi(unsigned int cmd, struct pt_regs *regs)
>  		estatus_node = (void *)gen_pool_alloc(ghes_estatus_pool,
>  						      node_len);
>  		if (estatus_node) {
> +			estatus_node->ghes = ghes;
>  			estatus_node->generic = ghes->generic;
>  			estatus = GHES_ESTATUS_FROM_NODE(estatus_node);
>  			memcpy(estatus, ghes->estatus, len);
> @@ -942,6 +946,10 @@ static int ghes_probe(struct platform_device *ghes_dev)
>  	}
>  	platform_set_drvdata(ghes_dev, ghes);
>  
> +	rc = ghes_edac_register(ghes, &ghes_dev->dev);
> +	if (rc < 0)
> +		goto err;
> +

If ghes_edac_register() failed, we need to do some cleanup such as
unregister from hed etc.

Or just move ghes_edac_register() before switch?

>  	return 0;
>  err:
>  	if (ghes) {
> @@ -995,6 +1003,9 @@ static int ghes_remove(struct platform_device *ghes_dev)
>  	}
>  
>  	ghes_fini(ghes);
> +
> +	ghes_edac_unregister(ghes);
> +
>  	kfree(ghes);
>  
>  	platform_set_drvdata(ghes_dev, NULL);
> diff --git a/include/acpi/ghes.h b/include/acpi/ghes.h
> index 3eb8dc4..c6fef72 100644
> --- a/include/acpi/ghes.h
> +++ b/include/acpi/ghes.h
> @@ -22,11 +22,14 @@ struct ghes {
>  		struct timer_list timer;
>  		unsigned int irq;
>  	};
> +
> +	struct mem_ctl_info *mci;

Why we need this?  This is not used by ghes.[hc].

>  };
>  
>  struct ghes_estatus_node {
>  	struct llist_node llnode;
>  	struct acpi_hest_generic *generic;
> +	struct ghes *ghes;
>  };
>  
>  struct ghes_estatus_cache {
> @@ -43,3 +46,27 @@ enum {
>  	GHES_SEV_RECOVERABLE = 0x2,
>  	GHES_SEV_PANIC = 0x3,
>  };
> +
> +#ifdef CONFIG_EDAC_GHES
> +void ghes_edac_report_mem_error(struct ghes *ghes, int sev,
> +				struct cper_sec_mem_err *mem_err);
> +
> +int ghes_edac_register(struct ghes *ghes, struct device *dev);
> +
> +void ghes_edac_unregister(struct ghes *ghes);
> +
> +#else
> +static inline void ghes_edac_report_mem_error(struct ghes *ghes, int sev,
> +				       struct cper_sec_mem_err *mem_err)
> +{
> +}
> +
> +static inline int ghes_edac_register(struct ghes *ghes, struct device *dev)
> +{
> +	return 0;
> +}
> +
> +static inline void ghes_edac_unregister(struct ghes *ghes)
> +{
> +}
> +#endif

I think it is better to put the above declaration into module which
implement these functions instead of use these functions.

Best Regards,
Huang Ying



  reply	other threads:[~2013-02-21  1:26 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-02-15 12:44 [PATCH EDAC 00/13] Add a driver to report Firmware first errors (via GHES) Mauro Carvalho Chehab
2013-02-15 12:44 ` [PATCH EDAC 01/13] edac: lock module owner to avoid error report conflicts Mauro Carvalho Chehab
2013-02-15 12:44 ` [PATCH EDAC 02/13] ghes: move structures/enum to a header file Mauro Carvalho Chehab
2013-02-15 12:44 ` [PATCH EDAC 03/13] ghes: add the needed hooks for EDAC error report Mauro Carvalho Chehab
2013-02-21  1:26   ` Huang Ying [this message]
2013-02-21 12:04     ` Mauro Carvalho Chehab
2013-02-22  0:45       ` Huang Ying
2013-02-22  8:50         ` Mauro Carvalho Chehab
2013-02-22  8:57           ` Mauro Carvalho Chehab
2013-02-25  0:25             ` Huang Ying
2013-02-15 12:44 ` [PATCH EDAC 04/13] edac: add a new memory layer type Mauro Carvalho Chehab
2013-02-15 12:44 ` [PATCH EDAC 05/13] ghes_edac: Register at EDAC core the BIOS report Mauro Carvalho Chehab
2013-02-15 12:44 ` [PATCH EDAC 06/13] ghes_edac: Allow registering more than once Mauro Carvalho Chehab
2013-02-15 12:44 ` [PATCH EDAC 07/13] edac: add support for raw error reports Mauro Carvalho Chehab
2013-02-15 14:13   ` Borislav Petkov
2013-02-15 15:25     ` Mauro Carvalho Chehab
2013-02-15 15:41       ` Borislav Petkov
2013-02-15 15:49         ` Mauro Carvalho Chehab
2013-02-15 16:02           ` Borislav Petkov
2013-02-15 18:20             ` Mauro Carvalho Chehab
2013-02-16 16:57               ` Borislav Petkov
2013-02-17 10:44                 ` Mauro Carvalho Chehab
2013-02-18 13:52                   ` Borislav Petkov
2013-02-18 15:24                     ` Mauro Carvalho Chehab
2013-02-19 11:56                       ` Mauro Carvalho Chehab
2013-02-15 12:44 ` [PATCH EDAC 08/13] ghes_edac: add support for reporting errors via EDAC Mauro Carvalho Chehab
2013-02-15 12:44 ` [PATCH EDAC 09/13] ghes_edac: do a better job of filling EDAC DIMM info Mauro Carvalho Chehab
2013-02-15 12:44 ` [PATCH EDAC 10/13] edac: better report error conditions in debug mode Mauro Carvalho Chehab
2013-02-15 12:44 ` [PATCH EDAC 11/13] edac: initialize the core earlier Mauro Carvalho Chehab
2013-02-15 12:45 ` [PATCH EDAC 12/13] ghes_edac.c: Don't credit the same memory dimm twice Mauro Carvalho Chehab
2013-02-15 12:45 ` [PATCH EDAC 13/13] ghes_edac: Improve driver's printk messages Mauro Carvalho Chehab
2013-02-15 16:38   ` Joe Perches
2013-02-15 17:33     ` Mauro Carvalho Chehab

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1361409967.7093.20.camel@yhuang-dev \
    --to=ying.huang@intel.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-edac@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mchehab@redhat.com \
    --cc=tony.luck@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).