linux-acpi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tang Chen <tangchen@cn.fujitsu.com>
To: tglx@linutronix.de, mingo@elte.hu, hpa@zytor.com,
	akpm@linux-foundation.org, tj@kernel.org, trenn@suse.de,
	yinghai@kernel.org, jiang.liu@huawei.com, wency@cn.fujitsu.com,
	laijs@cn.fujitsu.com, isimatu.yasuaki@jp.fujitsu.com,
	mgorman@suse.de, minchan@kernel.org, mina86@mina86.com,
	gong.chen@linux.intel.com, vasilis.liaskovitis@profitbricks.com,
	lwoodman@redhat.com, riel@redhat.com, jweiner@redhat.com,
	prarit@redhat.com
Cc: x86@kernel.org, linux-doc@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-mm@kvack.org,
	"Rafael J. Wysocki" <rjw@sisk.pl>,
	linux-acpi@vger.kernel.org, Tony Luck <tony.luck@intel.com>,
	Fenghua Yu <fenghua.yu@intel.com>,
	linux-ia64@vger.kernel.org
Subject: [Part1 PATCH v5 17/22] x86, ACPI, numa, ia64: split SLIT handling out
Date: Thu, 13 Jun 2013 21:03:04 +0800	[thread overview]
Message-ID: <1371128589-8953-18-git-send-email-tangchen@cn.fujitsu.com> (raw)
In-Reply-To: <1371128589-8953-1-git-send-email-tangchen@cn.fujitsu.com>

From: Yinghai Lu <yinghai@kernel.org>

We need to handle slit later, as it need to allocate buffer for distance
matrix. Also we do not need SLIT info before init_mem_mapping. So move
SLIT parsing procedure later.

x86_acpi_numa_init() will be splited into x86_acpi_numa_init_srat() and
x86_acpi_numa_init_slit().

It should not break ia64 by replacing acpi_numa_init with
acpi_numa_init_srat/acpi_numa_init_slit/acpi_num_arch_fixup.

-v2: Change name to acpi_numa_init_srat/acpi_numa_init_slit according tj.
     remove the reset_numa_distance() in numa_init(), as get we only set
     distance in slit handling.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: linux-acpi@vger.kernel.org
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: linux-ia64@vger.kernel.org
Tested-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Tang Chen <tangchen@cn.fujitsu.com>
Tested-by: Tang Chen <tangchen@cn.fujitsu.com>
---
 arch/ia64/kernel/setup.c    |    4 +++-
 arch/x86/include/asm/acpi.h |    3 ++-
 arch/x86/mm/numa.c          |   14 ++++++++++++--
 arch/x86/mm/srat.c          |   11 +++++++----
 drivers/acpi/numa.c         |   13 +++++++------
 include/linux/acpi.h        |    3 ++-
 6 files changed, 33 insertions(+), 15 deletions(-)

diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index 13bfdd2..5f7db4a 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -558,7 +558,9 @@ setup_arch (char **cmdline_p)
 	acpi_table_init();
 	early_acpi_boot_init();
 # ifdef CONFIG_ACPI_NUMA
-	acpi_numa_init();
+	acpi_numa_init_srat();
+	acpi_numa_init_slit();
+	acpi_numa_arch_fixup();
 #  ifdef CONFIG_ACPI_HOTPLUG_CPU
 	prefill_possible_map();
 #  endif
diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
index b31bf97..651db0b 100644
--- a/arch/x86/include/asm/acpi.h
+++ b/arch/x86/include/asm/acpi.h
@@ -178,7 +178,8 @@ static inline void disable_acpi(void) { }
 
 #ifdef CONFIG_ACPI_NUMA
 extern int acpi_numa;
-extern int x86_acpi_numa_init(void);
+int x86_acpi_numa_init_srat(void);
+void x86_acpi_numa_init_slit(void);
 #endif /* CONFIG_ACPI_NUMA */
 
 #define acpi_unlazy_tlb(x)	leave_mm(x)
diff --git a/arch/x86/mm/numa.c b/arch/x86/mm/numa.c
index 3254f22..630e09f 100644
--- a/arch/x86/mm/numa.c
+++ b/arch/x86/mm/numa.c
@@ -595,7 +595,6 @@ static int __init numa_init(int (*init_func)(void))
 
 	nodes_clear(numa_nodes_parsed);
 	memset(&numa_meminfo, 0, sizeof(numa_meminfo));
-	numa_reset_distance();
 
 	ret = init_func();
 	if (ret < 0)
@@ -633,6 +632,10 @@ static int __init dummy_numa_init(void)
 	return 0;
 }
 
+#ifdef CONFIG_ACPI_NUMA
+static bool srat_used __initdata;
+#endif
+
 /**
  * x86_numa_init - Initialize NUMA
  *
@@ -648,8 +651,10 @@ static void __init early_x86_numa_init(void)
 			return;
 #endif
 #ifdef CONFIG_ACPI_NUMA
-		if (!numa_init(x86_acpi_numa_init))
+		if (!numa_init(x86_acpi_numa_init_srat)) {
+			srat_used = true;
 			return;
+		}
 #endif
 #ifdef CONFIG_AMD_NUMA
 		if (!numa_init(amd_numa_init))
@@ -667,6 +672,11 @@ void __init x86_numa_init(void)
 
 	early_x86_numa_init();
 
+#ifdef CONFIG_ACPI_NUMA
+	if (srat_used)
+		x86_acpi_numa_init_slit();
+#endif
+
 	numa_emulation(&numa_meminfo, numa_distance_cnt);
 
 	node_possible_map = numa_nodes_parsed;
diff --git a/arch/x86/mm/srat.c b/arch/x86/mm/srat.c
index cdd0da9..443f9ef 100644
--- a/arch/x86/mm/srat.c
+++ b/arch/x86/mm/srat.c
@@ -185,14 +185,17 @@ out_err:
 	return -1;
 }
 
-void __init acpi_numa_arch_fixup(void) {}
-
-int __init x86_acpi_numa_init(void)
+int __init x86_acpi_numa_init_srat(void)
 {
 	int ret;
 
-	ret = acpi_numa_init();
+	ret = acpi_numa_init_srat();
 	if (ret < 0)
 		return ret;
 	return srat_disabled() ? -EINVAL : 0;
 }
+
+void __init x86_acpi_numa_init_slit(void)
+{
+	acpi_numa_init_slit();
+}
diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c
index 33e609f..6460db4 100644
--- a/drivers/acpi/numa.c
+++ b/drivers/acpi/numa.c
@@ -282,7 +282,7 @@ acpi_table_parse_srat(enum acpi_srat_type id,
 					    handler, max_entries);
 }
 
-int __init acpi_numa_init(void)
+int __init acpi_numa_init_srat(void)
 {
 	int cnt = 0;
 
@@ -303,11 +303,6 @@ int __init acpi_numa_init(void)
 					    NR_NODE_MEMBLKS);
 	}
 
-	/* SLIT: System Locality Information Table */
-	acpi_table_parse(ACPI_SIG_SLIT, acpi_parse_slit);
-
-	acpi_numa_arch_fixup();
-
 	if (cnt < 0)
 		return cnt;
 	else if (!parsed_numa_memblks)
@@ -315,6 +310,12 @@ int __init acpi_numa_init(void)
 	return 0;
 }
 
+void __init acpi_numa_init_slit(void)
+{
+	/* SLIT: System Locality Information Table */
+	acpi_table_parse(ACPI_SIG_SLIT, acpi_parse_slit);
+}
+
 int acpi_get_pxm(acpi_handle h)
 {
 	unsigned long long pxm;
diff --git a/include/linux/acpi.h b/include/linux/acpi.h
index 4e3731b..92463b5 100644
--- a/include/linux/acpi.h
+++ b/include/linux/acpi.h
@@ -85,7 +85,8 @@ int early_acpi_boot_init(void);
 int acpi_boot_init (void);
 void acpi_boot_table_init (void);
 int acpi_mps_check (void);
-int acpi_numa_init (void);
+int acpi_numa_init_srat(void);
+void acpi_numa_init_slit(void);
 
 int acpi_table_init (void);
 int acpi_table_parse(char *id, acpi_tbl_table_handler handler);
-- 
1.7.1

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

      parent reply	other threads:[~2013-06-13 13:03 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <1371128589-8953-1-git-send-email-tangchen@cn.fujitsu.com>
2013-06-13 13:02 ` [Part1 PATCH v5 03/22] x86, ACPI, mm: Kill max_low_pfn_mapped Tang Chen
2013-06-17 21:04   ` Tejun Heo
2013-06-17 21:13     ` Yinghai Lu
2013-06-17 23:08       ` Tejun Heo
2013-06-13 13:02 ` [Part1 PATCH v5 04/22] x86, ACPI: Search buffer above 4GB in a second try for acpi initrd table override Tang Chen
2013-06-17 21:06   ` Tejun Heo
2013-06-13 13:02 ` [Part1 PATCH v5 05/22] x86, ACPI: Increase acpi initrd override tables number limit Tang Chen
2013-06-13 13:02 ` [Part1 PATCH v5 06/22] x86, ACPI: Split acpi_initrd_override() into find/copy two steps Tang Chen
2013-06-13 13:02 ` [Part1 PATCH v5 07/22] x86, ACPI: Store override acpi tables phys addr in cpio files info array Tang Chen
2013-06-17 23:38   ` Tejun Heo
2013-06-17 23:40     ` Yinghai Lu
2013-06-17 23:52   ` Tejun Heo
2013-06-13 13:02 ` [Part1 PATCH v5 08/22] x86, ACPI: Make acpi_initrd_override_find work with 32bit flat mode Tang Chen
2013-06-18  0:07   ` Tejun Heo
2013-06-13 13:02 ` [Part1 PATCH v5 09/22] x86, ACPI: Find acpi tables in initrd early from head_32.S/head64.c Tang Chen
2013-06-18  0:33   ` Tejun Heo
2013-06-13 13:03 ` Tang Chen [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1371128589-8953-18-git-send-email-tangchen@cn.fujitsu.com \
    --to=tangchen@cn.fujitsu.com \
    --cc=akpm@linux-foundation.org \
    --cc=fenghua.yu@intel.com \
    --cc=gong.chen@linux.intel.com \
    --cc=hpa@zytor.com \
    --cc=isimatu.yasuaki@jp.fujitsu.com \
    --cc=jiang.liu@huawei.com \
    --cc=jweiner@redhat.com \
    --cc=laijs@cn.fujitsu.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-ia64@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=lwoodman@redhat.com \
    --cc=mgorman@suse.de \
    --cc=mina86@mina86.com \
    --cc=minchan@kernel.org \
    --cc=mingo@elte.hu \
    --cc=prarit@redhat.com \
    --cc=riel@redhat.com \
    --cc=rjw@sisk.pl \
    --cc=tglx@linutronix.de \
    --cc=tj@kernel.org \
    --cc=tony.luck@intel.com \
    --cc=trenn@suse.de \
    --cc=vasilis.liaskovitis@profitbricks.com \
    --cc=wency@cn.fujitsu.com \
    --cc=x86@kernel.org \
    --cc=yinghai@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).