From mboxrd@z Thu Jan 1 00:00:00 1970 From: fabio tirapelle Subject: Hauppauge WinTV-HVR-1120 on Unbuntu 10.04 Date: Mon, 11 Oct 2010 10:41:17 +0100 (BST) Message-ID: <139193.61347.qm@web25403.mail.ukl.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8BIT Return-path: Received: from nm5.bullet.mail.ukl.yahoo.com ([217.146.182.226]:38040 "HELO nm5.bullet.mail.ukl.yahoo.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1753558Ab0JKJqw convert rfc822-to-8bit (ORCPT ); Mon, 11 Oct 2010 05:46:52 -0400 Sender: linux-acpi-owner@vger.kernel.org List-Id: linux-acpi@vger.kernel.org To: linux-acpi@vger.kernel.org Hi After upgrading from Ubuntu 9.10 to Ubuntu 10.04 my Hauppauge WinTV-HVR-1120 (sometimes) doesn't work correctly. I get random the following errors: [ 53.216153] DVB: registering new adapter (saa7133[0]) [ 53.216156] DVB: registering adapter 2 frontend 0 (NXP TDA10048HN DVB-T)... [ 53.840013] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)... [ 53.840019] saa7134 0000:01:06.0: firmware: requesting dvb-fe-tda10048-1.0.fw [ 53.880505] tda10048_firmware_upload: firmware read 24878 bytes. [ 53.880509] tda10048_firmware_upload: firmware uploading [ 58.280136] tda10048_firmware_upload: firmware uploaded [ 59.024537] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [ 59.024541] tda18271c2_rf_tracking_filters_correction: error -5 on line 264 [ 59.420153] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [ 59.420157] tda18271_toggle_output: error -5 on line 47 [ 91.004019] Clocksource tsc unstable (delta = -295012684 ns) [ 256.293639] eth0: link up. [ 256.294750] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 263.523498] eth0: link down. [ 265.258740] eth0: link up. [ 266.460026] eth0: no IPv6 routers present [ 9869.636167] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [ 9869.636178] tda18271_init: error -5 on line 826 [ 9872.636220] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [ 9872.636232] tda18271_toggle_output: error -5 on line 47 [ 9998.240167] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [ 9998.240178] tda18271_init: error -5 on line 826 [10001.240179] tda18271_write_regs: ERROR: idx = 0x5, len = 1, i2c_transfer returned: -5 [10001.240190] tda18271_toggle_output: error -5 on line 47 Any ideas? Thanks