linux-acpi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Mark Salter <msalter@redhat.com>
To: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Cc: rjw@rjwysocki.net, lenb@kernel.org, catalin.marinas@arm.com,
	will.deacon@arm.com, thomas.lendacky@amd.com,
	herbert@gondor.apana.org.au, davem@davemloft.net, arnd@arndb.de,
	hanjun.guo@linaro.org, al.stone@linaro.org,
	grant.likely@linaro.org, leo.duran@amd.com,
	linux-arm-kernel@lists.infradead.org, linux-acpi@vger.kernel.org,
	linux-kernel@vger.kernel.org, linaro-acpi@lists.linaro.org,
	netdev@vger.kernel.org, linux-crypto@vger.kernel.org
Subject: Re: [V5 PATCH 2/5] arm64 : Introduce support for ACPI _CCA object
Date: Thu, 28 May 2015 22:38:19 -0400	[thread overview]
Message-ID: <1432867099.24429.4.camel@deneb.redhat.com> (raw)
In-Reply-To: <1432159758-4486-3-git-send-email-Suravee.Suthikulpanit@amd.com>

On Wed, 2015-05-20 at 17:09 -0500, Suravee Suthikulpanit wrote:
> From http://www.uefi.org/sites/default/files/resources/ACPI_6.0.pdf,
> section 6.2.17 _CCA states that ARM platforms require ACPI _CCA
> object to be specified for DMA-cabpable devices. Therefore, this patch
> specifies ACPI_CCA_REQUIRED in arm64 Kconfig.
> 
> In addition, to handle the case when _CCA is missing, arm64 would assign
> dummy_dma_ops to disable DMA capability of the device.
> 
> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
> Signed-off-by: Mark Salter <msalter@redhat.com>
> Signed-off-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
> ---
>  arch/arm64/Kconfig                   |  1 +
>  arch/arm64/include/asm/dma-mapping.h | 18 ++++++-
>  arch/arm64/mm/dma-mapping.c          | 92 ++++++++++++++++++++++++++++++++++++
>  3 files changed, 109 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index 4269dba..95307b4 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -1,5 +1,6 @@
>  config ARM64
>  	def_bool y
> +	select ACPI_CCA_REQUIRED if ACPI
>  	select ACPI_GENERIC_GSI if ACPI
>  	select ACPI_REDUCED_HARDWARE_ONLY if ACPI
>  	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
> diff --git a/arch/arm64/include/asm/dma-mapping.h b/arch/arm64/include/asm/dma-mapping.h
> index 9437e3d..f0d6d0b 100644
> --- a/arch/arm64/include/asm/dma-mapping.h
> +++ b/arch/arm64/include/asm/dma-mapping.h
> @@ -18,6 +18,7 @@
>  
>  #ifdef __KERNEL__
>  
> +#include <linux/acpi.h>
>  #include <linux/types.h>
>  #include <linux/vmalloc.h>
>  

^^^ This hunk causes build issues with a couple of drivers:

drivers/scsi/megaraid/megaraid_sas_fp.c:69:0: warning: "FALSE" redefined [enabled by default]
 #define FALSE 0
 ^
In file included from include/acpi/acpi.h:58:0,
                 from include/linux/acpi.h:37,
                 from ./arch/arm64/include/asm/dma-mapping.h:21,
                 from include/linux/dma-mapping.h:86,
                 from ./arch/arm64/include/asm/pci.h:7,
                 from include/linux/pci.h:1460,
                 from drivers/scsi/megaraid/megaraid_sas_fp.c:37:
include/acpi/actypes.h:433:0: note: this is the location of the previous definition
 #define FALSE                           (1 == 0)
 ^


In file included from include/acpi/acpi.h:58:0,
                 from include/linux/acpi.h:37,
                 from ./arch/arm64/include/asm/dma-mapping.h:21,
                 from include/linux/dma-mapping.h:86,
                 from include/scsi/scsi_cmnd.h:4,
                 from drivers/scsi/ufs/ufshcd.h:60,
                 from drivers/scsi/ufs/ufshcd.c:43:
include/acpi/actypes.h:433:41: error: expected identifier before ‘(’ token
 #define FALSE                           (1 == 0)
                                         ^
drivers/scsi/ufs/unipro.h:203:2: note: in expansion of macro ‘FALSE’
  FALSE = 0,
  ^

This happens because the ACPI definitions of TRUE and FALSE conflict
with local definitions in megaraid and enum declaration in ufs.


> @@ -28,13 +29,23 @@
>  
>  #define DMA_ERROR_CODE	(~(dma_addr_t)0)
>  extern struct dma_map_ops *dma_ops;
> +extern struct dma_map_ops dummy_dma_ops;
>  
>  static inline struct dma_map_ops *__generic_dma_ops(struct device *dev)
>  {
> -	if (unlikely(!dev) || !dev->archdata.dma_ops)
> +	if (unlikely(!dev))
>  		return dma_ops;
> -	else
> +	else if (dev->archdata.dma_ops)
>  		return dev->archdata.dma_ops;
> +	else if (acpi_disabled)
> +		return dma_ops;
> +
> +	/*
> +	 * When ACPI is enabled, if arch_set_dma_ops is not called,
> +	 * we will disable device DMA capability by setting it
> +	 * to dummy_dma_ops.
> +	 */
> +	return &dummy_dma_ops;
>  }
>  
>  static inline struct dma_map_ops *get_dma_ops(struct device *dev)
> @@ -48,6 +59,9 @@ static inline struct dma_map_ops *get_dma_ops(struct device *dev)
>  static inline void arch_setup_dma_ops(struct device *dev, u64 dma_base, u64 size,
>  				      struct iommu_ops *iommu, bool coherent)
>  {
> +	if (!acpi_disabled && !dev->archdata.dma_ops)
> +		dev->archdata.dma_ops = dma_ops;
> +
>  	dev->archdata.dma_coherent = coherent;
>  }
>  #define arch_setup_dma_ops	arch_setup_dma_ops
> diff --git a/arch/arm64/mm/dma-mapping.c b/arch/arm64/mm/dma-mapping.c
> index ef7d112..6e6d6ad 100644
> --- a/arch/arm64/mm/dma-mapping.c
> +++ b/arch/arm64/mm/dma-mapping.c
> @@ -415,6 +415,98 @@ out:
>  	return -ENOMEM;
>  }
>  
> +/********************************************
> + * The following APIs are for dummy DMA ops *
> + ********************************************/
> +
> +static void *__dummy_alloc(struct device *dev, size_t size,
> +			   dma_addr_t *dma_handle, gfp_t flags,
> +			   struct dma_attrs *attrs)
> +{
> +	return NULL;
> +}
> +
> +static void __dummy_free(struct device *dev, size_t size,
> +			 void *vaddr, dma_addr_t dma_handle,
> +			 struct dma_attrs *attrs)
> +{
> +}
> +
> +static int __dummy_mmap(struct device *dev,
> +			struct vm_area_struct *vma,
> +			void *cpu_addr, dma_addr_t dma_addr, size_t size,
> +			struct dma_attrs *attrs)
> +{
> +	return -ENXIO;
> +}
> +
> +static dma_addr_t __dummy_map_page(struct device *dev, struct page *page,
> +				   unsigned long offset, size_t size,
> +				   enum dma_data_direction dir,
> +				   struct dma_attrs *attrs)
> +{
> +	return DMA_ERROR_CODE;
> +}
> +
> +static void __dummy_unmap_page(struct device *dev, dma_addr_t dev_addr,
> +			       size_t size, enum dma_data_direction dir,
> +			       struct dma_attrs *attrs)
> +{
> +}
> +
> +static int __dummy_map_sg(struct device *dev, struct scatterlist *sgl,
> +			  int nelems, enum dma_data_direction dir,
> +			  struct dma_attrs *attrs)
> +{
> +	return 0;
> +}
> +
> +static void __dummy_unmap_sg(struct device *dev,
> +			     struct scatterlist *sgl, int nelems,
> +			     enum dma_data_direction dir,
> +			     struct dma_attrs *attrs)
> +{
> +}
> +
> +static void __dummy_sync_single(struct device *dev,
> +				dma_addr_t dev_addr, size_t size,
> +				enum dma_data_direction dir)
> +{
> +}
> +
> +static void __dummy_sync_sg(struct device *dev,
> +			    struct scatterlist *sgl, int nelems,
> +			    enum dma_data_direction dir)
> +{
> +}
> +
> +static int __dummy_mapping_error(struct device *hwdev, dma_addr_t dma_addr)
> +{
> +	return 1;
> +}
> +
> +static int __dummy_dma_supported(struct device *hwdev, u64 mask)
> +{
> +	return 0;
> +}
> +
> +struct dma_map_ops dummy_dma_ops = {
> +	.alloc                  = __dummy_alloc,
> +	.free                   = __dummy_free,
> +	.mmap                   = __dummy_mmap,
> +	.map_page               = __dummy_map_page,
> +	.unmap_page             = __dummy_unmap_page,
> +	.map_sg                 = __dummy_map_sg,
> +	.unmap_sg               = __dummy_unmap_sg,
> +	.sync_single_for_cpu    = __dummy_sync_single,
> +	.sync_single_for_device = __dummy_sync_single,
> +	.sync_sg_for_cpu        = __dummy_sync_sg,
> +	.sync_sg_for_device     = __dummy_sync_sg,
> +	.mapping_error          = __dummy_mapping_error,
> +	.dma_supported          = __dummy_dma_supported,
> +};
> +EXPORT_SYMBOL(dummy_dma_ops);
> +
>  static int __init arm64_dma_init(void)
>  {
>  	int ret;

  reply	other threads:[~2015-05-29  2:38 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-20 22:09 [V5 PATCH 0/5] ACPI: Introduce support for _CCA object Suravee Suthikulpanit
2015-05-20 22:09 ` [V5 PATCH 1/5] ACPI / scan: Parse _CCA and setup device coherency Suravee Suthikulpanit
2015-05-22 21:56   ` Rafael J. Wysocki
2015-05-22 22:24     ` Suravee Suthikulanit
2015-05-22 23:05       ` Rafael J. Wysocki
2015-05-23  0:15         ` Suravee Suthikulanit
2015-05-23  1:25           ` Rafael J. Wysocki
2015-05-23  1:38             ` Suravee Suthikulanit
2015-05-20 22:09 ` [V5 PATCH 2/5] arm64 : Introduce support for ACPI _CCA object Suravee Suthikulpanit
2015-05-29  2:38   ` Mark Salter [this message]
2015-06-03 14:37     ` Suravee Suthikulanit
2015-06-03 15:03       ` Mark Salter
2015-05-20 22:09 ` [V5 PATCH 3/5] device property: Introduces device_dma_is_coherent() Suravee Suthikulpanit
2015-05-20 22:09 ` [V5 PATCH 4/5] crypto: ccp - Unify coherency checking logic with device_dma_is_coherent() Suravee Suthikulpanit
2015-05-20 22:09 ` [V5 PATCH 5/5] amd-xgbe: " Suravee Suthikulpanit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1432867099.24429.4.camel@deneb.redhat.com \
    --to=msalter@redhat.com \
    --cc=Suravee.Suthikulpanit@amd.com \
    --cc=al.stone@linaro.org \
    --cc=arnd@arndb.de \
    --cc=catalin.marinas@arm.com \
    --cc=davem@davemloft.net \
    --cc=grant.likely@linaro.org \
    --cc=hanjun.guo@linaro.org \
    --cc=herbert@gondor.apana.org.au \
    --cc=lenb@kernel.org \
    --cc=leo.duran@amd.com \
    --cc=linaro-acpi@lists.linaro.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=rjw@rjwysocki.net \
    --cc=thomas.lendacky@amd.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).