linux-acpi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To: linux-acpi@vger.kernel.org, linux-i2c@vger.kernel.org,
	Lee Jones <lee.jones@linaro.org>,
	Wolfram Sang <wsa@the-dreams.de>,
	"Rafael J . Wysocki" <rjw@rjwysocki.net>,
	Mika Westerberg <mika.westerberg@intel.com>,
	"Puustinen, Ismo" <ismo.puustinen@intel.com>,
	linux-kernel@vger.kernel.org
Cc: Thierry Reding <thierry.reding@gmail.com>
Subject: Re: [PATCH v4 5/5] pwm-pca9685: enable ACPI device found on Galileo Gen2
Date: Mon, 09 Nov 2015 15:53:36 +0200	[thread overview]
Message-ID: <1447077216.31665.73.camel@linux.intel.com> (raw)
In-Reply-To: <1445591805-28886-6-git-send-email-andriy.shevchenko@linux.intel.com>

On Fri, 2015-10-23 at 12:16 +0300, Andy Shevchenko wrote:
> There is a chip connected to i2c bus on Intel Galileo Gen2 board.
> Enable it via
> ACPI ID INT3492.

Thierry, ping?

> 
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> ---
>  drivers/pwm/Kconfig       |  2 +-
>  drivers/pwm/pwm-pca9685.c | 20 ++++++++++++++++----
>  2 files changed, 17 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> index 062630a..bb114ef 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -242,7 +242,7 @@ config PWM_MXS
>  
>  config PWM_PCA9685
>  	tristate "NXP PCA9685 PWM driver"
> -	depends on OF && I2C
> +	depends on I2C
>  	select REGMAP_I2C
>  	help
>  	  Generic PWM framework driver for NXP PCA9685 LED
> controller.
> diff --git a/drivers/pwm/pwm-pca9685.c b/drivers/pwm/pwm-pca9685.c
> index 70448a6..117fccf 100644
> --- a/drivers/pwm/pwm-pca9685.c
> +++ b/drivers/pwm/pwm-pca9685.c
> @@ -19,9 +19,11 @@
>   * this program.  If not, see <http://www.gnu.org/licenses/>.
>   */
>  
> +#include <linux/acpi.h>
>  #include <linux/i2c.h>
>  #include <linux/module.h>
>  #include <linux/platform_device.h>
> +#include <linux/property.h>
>  #include <linux/pwm.h>
>  #include <linux/regmap.h>
>  #include <linux/slab.h>
> @@ -297,7 +299,6 @@ static const struct regmap_config
> pca9685_regmap_i2c_config = {
>  static int pca9685_pwm_probe(struct i2c_client *client,
>  				const struct i2c_device_id *id)
>  {
> -	struct device_node *np = client->dev.of_node;
>  	struct pca9685 *pca;
>  	int ret;
>  	int mode2;
> @@ -320,12 +321,12 @@ static int pca9685_pwm_probe(struct i2c_client
> *client,
>  
>  	regmap_read(pca->regmap, PCA9685_MODE2, &mode2);
>  
> -	if (of_property_read_bool(np, "invert"))
> +	if (device_property_read_bool(&client->dev, "invert"))
>  		mode2 |= MODE2_INVRT;
>  	else
>  		mode2 &= ~MODE2_INVRT;
>  
> -	if (of_property_read_bool(np, "open-drain"))
> +	if (device_property_read_bool(&client->dev, "open-drain"))
>  		mode2 &= ~MODE2_OUTDRV;
>  	else
>  		mode2 |= MODE2_OUTDRV;
> @@ -363,16 +364,27 @@ static const struct i2c_device_id pca9685_id[]
> = {
>  };
>  MODULE_DEVICE_TABLE(i2c, pca9685_id);
>  
> +#ifdef CONFIG_ACPI
> +static const struct acpi_device_id pca9685_acpi_ids[] = {
> +	{ "INT3492", 0 },
> +	{ /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(acpi, pca9685_acpi_ids);
> +#endif
> +
> +#ifdef CONFIG_OF
>  static const struct of_device_id pca9685_dt_ids[] = {
>  	{ .compatible = "nxp,pca9685-pwm", },
>  	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, pca9685_dt_ids);
> +#endif
>  
>  static struct i2c_driver pca9685_i2c_driver = {
>  	.driver = {
>  		.name = "pca9685-pwm",
> -		.of_match_table = pca9685_dt_ids,
> +		.acpi_match_table = ACPI_PTR(pca9685_acpi_ids),
> +		.of_match_table = of_match_ptr(pca9685_dt_ids),
>  	},
>  	.probe = pca9685_pwm_probe,
>  	.remove = pca9685_pwm_remove,

-- 
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Intel Finland Oy

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  reply	other threads:[~2015-11-09 13:53 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-10-23  9:16 [PATCH v4 0/5] enable I2C devices behind I2C bus on Gen2 Andy Shevchenko
2015-10-23  9:16 ` [PATCH v4 1/5] mfd: core: redo ACPI matching of the children devices Andy Shevchenko
2015-10-23  9:16 ` [PATCH v4 2/5] mfd: intel_quark_i2c_gpio: load gpio driver first Andy Shevchenko
2015-10-23  9:16 ` [PATCH v4 3/5] mfd: intel_quark_i2c_gpio: support devices behind i2c bus Andy Shevchenko
2015-10-23  9:16 ` [PATCH v4 4/5] at24: enable ACPI device found on Galileo Gen2 Andy Shevchenko
2015-10-23 17:20   ` Ben Gardner
2015-10-23  9:16 ` [PATCH v4 5/5] pwm-pca9685: " Andy Shevchenko
2015-11-09 13:53   ` Andy Shevchenko [this message]
2015-11-09 17:10     ` Thierry Reding
2015-10-23 12:38 ` [PATCH v4 0/5] enable I2C devices behind I2C bus on Gen2 Wolfram Sang
2015-10-23 13:50   ` Andy Shevchenko
2015-10-26  8:16   ` Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1447077216.31665.73.camel@linux.intel.com \
    --to=andriy.shevchenko@linux.intel.com \
    --cc=ismo.puustinen@intel.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-acpi@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mika.westerberg@intel.com \
    --cc=rjw@rjwysocki.net \
    --cc=thierry.reding@gmail.com \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).