From: qiujiang <qiujiang@huawei.com>
To: linus.walleij@linaro.org, gnurou@gmail.com
Cc: mika.westerberg@linux.intel.com, andy.shevchenko@gmail.com,
delicious.quinoa@gmail.com, jamie@jamieiles.com,
linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
linux-acpi@vger.kernel.org, linuxarm@huawei.com,
haifeng.wei@huawei.com, charles.chenxin@huawei.com,
qiujiang <qiujiang@huawei.com>
Subject: [PATCH v6 1/2] gpio: dwapb: convert device node to fwnode
Date: Sat, 26 Mar 2016 10:31:35 +0800 [thread overview]
Message-ID: <1458959496-57455-2-git-send-email-qiujiang@huawei.com> (raw)
In-Reply-To: <1458959496-57455-1-git-send-email-qiujiang@huawei.com>
This patch converts device node to fwnode for dwapb driver,
so as to provide a unified node for DT and ACPI bindings.
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: qiujiang <qiujiang@huawei.com>
---
drivers/gpio/gpio-dwapb.c | 48 +++++++++++++++-----------------
drivers/mfd/intel_quark_i2c_gpio.c | 2 +-
include/linux/platform_data/gpio-dwapb.h | 2 +-
3 files changed, 25 insertions(+), 27 deletions(-)
diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
index 597de1e..3498393 100644
--- a/drivers/gpio/gpio-dwapb.c
+++ b/drivers/gpio/gpio-dwapb.c
@@ -22,6 +22,7 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
#include <linux/spinlock.h>
#include <linux/platform_data/gpio-dwapb.h>
#include <linux/slab.h>
@@ -290,14 +291,14 @@ static void dwapb_configure_irqs(struct dwapb_gpio *gpio,
struct dwapb_port_property *pp)
{
struct gpio_chip *gc = &port->gc;
- struct device_node *node = pp->node;
+ struct fwnode_handle *fwnode = pp->fwnode;
struct irq_chip_generic *irq_gc = NULL;
unsigned int hwirq, ngpio = gc->ngpio;
struct irq_chip_type *ct;
int err, i;
- gpio->domain = irq_domain_add_linear(node, ngpio,
- &irq_generic_chip_ops, gpio);
+ gpio->domain = irq_domain_create_linear(fwnode, ngpio,
+ &irq_generic_chip_ops, gpio);
if (!gpio->domain)
return;
@@ -415,7 +416,8 @@ static int dwapb_gpio_add_port(struct dwapb_gpio *gpio,
}
#ifdef CONFIG_OF_GPIO
- port->gc.of_node = pp->node;
+ port->gc.of_node = is_of_node(pp->fwnode) ?
+ to_of_node(pp->fwnode) : NULL;
#endif
port->gc.ngpio = pp->ngpio;
port->gc.base = pp->gpio_base;
@@ -447,19 +449,15 @@ static void dwapb_gpio_unregister(struct dwapb_gpio *gpio)
}
static struct dwapb_platform_data *
-dwapb_gpio_get_pdata_of(struct device *dev)
+dwapb_gpio_get_pdata(struct device *dev)
{
- struct device_node *node, *port_np;
+ struct fwnode_handle *fwnode;
struct dwapb_platform_data *pdata;
struct dwapb_port_property *pp;
int nports;
int i;
- node = dev->of_node;
- if (!IS_ENABLED(CONFIG_OF_GPIO) || !node)
- return ERR_PTR(-ENODEV);
-
- nports = of_get_child_count(node);
+ nports = device_get_child_node_count(dev);
if (nports == 0)
return ERR_PTR(-ENODEV);
@@ -474,21 +472,19 @@ dwapb_gpio_get_pdata_of(struct device *dev)
pdata->nports = nports;
i = 0;
- for_each_child_of_node(node, port_np) {
+ device_for_each_child_node(dev, fwnode) {
pp = &pdata->properties[i++];
- pp->node = port_np;
+ pp->fwnode = fwnode;
- if (of_property_read_u32(port_np, "reg", &pp->idx) ||
+ if (fwnode_property_read_u32(fwnode, "reg", &pp->idx) ||
pp->idx >= DWAPB_MAX_PORTS) {
- dev_err(dev, "missing/invalid port index for %s\n",
- port_np->full_name);
+ dev_err(dev, "missing/invalid port index\n");
return ERR_PTR(-EINVAL);
}
- if (of_property_read_u32(port_np, "snps,nr-gpios",
+ if (fwnode_property_read_u32(fwnode, "snps,nr-gpios",
&pp->ngpio)) {
- dev_info(dev, "failed to get number of gpios for %s\n",
- port_np->full_name);
+ dev_info(dev, "failed to get number of gpios\n");
pp->ngpio = 32;
}
@@ -496,18 +492,20 @@ dwapb_gpio_get_pdata_of(struct device *dev)
* Only port A can provide interrupts in all configurations of
* the IP.
*/
- if (pp->idx == 0 &&
- of_property_read_bool(port_np, "interrupt-controller")) {
- pp->irq = irq_of_parse_and_map(port_np, 0);
+ if (dev->of_node && pp->idx == 0 &&
+ fwnode_property_read_bool(fwnode,
+ "interrupt-controller")) {
+ pp->irq = irq_of_parse_and_map(to_of_node(fwnode), 0);
if (!pp->irq) {
dev_warn(dev, "no irq for bank %s\n",
- port_np->full_name);
+ to_of_node(fwnode)->full_name);
}
}
pp->irq_shared = false;
pp->gpio_base = -1;
- pp->name = port_np->full_name;
+ if (dev->of_node)
+ pp->name = to_of_node(fwnode)->full_name;
}
return pdata;
@@ -523,7 +521,7 @@ static int dwapb_gpio_probe(struct platform_device *pdev)
struct dwapb_platform_data *pdata = dev_get_platdata(dev);
if (!pdata) {
- pdata = dwapb_gpio_get_pdata_of(dev);
+ pdata = dwapb_gpio_get_pdata(dev);
if (IS_ERR(pdata))
return PTR_ERR(pdata);
}
diff --git a/drivers/mfd/intel_quark_i2c_gpio.c b/drivers/mfd/intel_quark_i2c_gpio.c
index bdc5e27..958ed26 100644
--- a/drivers/mfd/intel_quark_i2c_gpio.c
+++ b/drivers/mfd/intel_quark_i2c_gpio.c
@@ -219,7 +219,7 @@ static int intel_quark_gpio_setup(struct pci_dev *pdev, struct mfd_cell *cell)
return -ENOMEM;
/* Set the properties for portA */
- pdata->properties->node = NULL;
+ pdata->properties->fwnode = NULL;
pdata->properties->name = "intel-quark-x1000-gpio-portA";
pdata->properties->idx = 0;
pdata->properties->ngpio = INTEL_QUARK_MFD_NGPIO;
diff --git a/include/linux/platform_data/gpio-dwapb.h b/include/linux/platform_data/gpio-dwapb.h
index 28702c8..c5bd1f2 100644
--- a/include/linux/platform_data/gpio-dwapb.h
+++ b/include/linux/platform_data/gpio-dwapb.h
@@ -15,7 +15,7 @@
#define GPIO_DW_APB_H
struct dwapb_port_property {
- struct device_node *node;
+ struct fwnode_handle *fwnode;
const char *name;
unsigned int idx;
unsigned int ngpio;
--
1.9.1
next prev parent reply other threads:[~2016-03-26 2:31 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-26 2:31 [PATCH v6 0/2] gpio: dwapb: add gpio-signaled acpi event support for power button qiujiang
2016-03-26 2:31 ` qiujiang [this message]
2016-03-29 16:30 ` [PATCH v6 1/2] gpio: dwapb: convert device node to fwnode Alan Tull
2016-03-30 11:38 ` Andy Shevchenko
2016-03-31 0:51 ` Jiang Qiu
2016-03-31 13:25 ` Andy Shevchenko
2016-03-26 2:31 ` [PATCH v6 2/2] gpio: dwapb: add gpio-signaled acpi event support qiujiang
2016-03-30 11:41 ` Andy Shevchenko
2016-03-31 0:59 ` Jiang Qiu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1458959496-57455-2-git-send-email-qiujiang@huawei.com \
--to=qiujiang@huawei.com \
--cc=andy.shevchenko@gmail.com \
--cc=charles.chenxin@huawei.com \
--cc=delicious.quinoa@gmail.com \
--cc=gnurou@gmail.com \
--cc=haifeng.wei@huawei.com \
--cc=jamie@jamieiles.com \
--cc=linus.walleij@linaro.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxarm@huawei.com \
--cc=mika.westerberg@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox