Re: [PATCH] power: Add support for LTC1760 Dual Smart Battery System Manager

[Karl-Heinz Schneider <karl-heinz@schneider-inet.de>]

Hi,

Am Montag, den 06.06.2016, 12:16 +0200 schrieb Peter Rosin:
> Hi!
> 
> On 2016-06-05 22:55, Karl-Heinz Schneider wrote:
> > This driver adds support for the LTC1760 Dual Smart Battery System
> > Manager.
> > The LTC1760 is an I2C device listening at address 0x0a and is capable of
> > communicating up to two I2C smart battery devices. Both smart battery
> > devices are listening at address 0x0b, so the LTC1760 muliplexes between
> > them. The driver makes use of the I2C-Mux framework to allow smart
> > batteries to be bound via device tree, i.e. the sbs-battery driver.
> > 
> > Via sysfs interface the online state and charge type are presented where
> > the charge type can also be changed between the default value "trickle"
> > and
> > "fast".
> > 
> > Signed-off-by: Karl-Heinz Schneider <karl-heinz@schneider-inet.de>
> > ---
> > Path generated against v4.7-rc1
> 
> This patch has two fundamental problems. First, the patch is whitespace-
> damaged (your mailer probably destroyed it). Please fix that. Second, and
> more serious, the patch has not even been compile-tested when applied on
> top of v4.7-rc1.
Sorry mixed things up in the makefile. Was happy the compiler didn't
complain about anything...
> 
> The i2c-muxing code saw an update in 4.6 and this driver needs adjustment.
> As a hint, I suspect that you can make this mux "mux-locked" and avoid
> the dead-lock workaround in ltc1760_write_select_bat_reg().
Difficult to test for me, since I'm forced to use an old 3.14 Kernel for
the target device (SECO imx6 board).
> 
> I didn't look further than this.
> 
> Cheers,
> Peter
Tanks for review and sorry for noise in this case. Will fix the issues.

Greetings