linux-acpi.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
To: rjw@rjwysocki.net
Cc: linux-acpi@vger.kernel.org,
	Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Subject: [PATCH v2 2/3] acpi: dptf_power: Add DPTF power participant
Date: Wed, 22 Jun 2016 20:42:42 -0700	[thread overview]
Message-ID: <1466653363-7311-3-git-send-email-srinivas.pandruvada@linux.intel.com> (raw)
In-Reply-To: <1466653363-7311-1-git-send-email-srinivas.pandruvada@linux.intel.com>

This driver adds support for Dynamic Platform and Thermal Framework
(DPTF) Platform Power Participant device support.
This participant is responsible for exposing platform telemetry such as
platform Power, battery Information such as state of Charge, estimated
maximum sustainable power (PMax), SMART battery spec information.

This driver is implemented as a platform driver for INT3407 and presented
as power_supply device. Since this has common features with the ACPI
battery, existing interface provide by battery_common driver are reused
to present as a battery power supply device.

Since this driver will also register a battery power supply device,this
driver will exit if CONFIG_ACPI_BATTERY is defined.

There are two types of objects in INT3407:
- Same as ACPI Battery objects: _BST and _BIX. These are exposed as
standard power supply attributes.
- Specific to INT3407, which are related to platform power
There are some objects, for which it doesn't make sense to enhance
power_supply class and add attributes there. They are represented as
sysfs attribute under acpi device. Here the bid for INT3407 is TPWR
in the following example.
/sys/class/power_supply/TPWR
├── alarm
├── capacity
├── capacity_level
├── cycle_count
├── device -> ../../../INT3407:00
│   ├── dptf_power
│   │   ├── adapter_rating
│   │   ├── battery_steady_power
│   │   ├── charger_type
│   │   ├── max_platform_power
│   │   ├── platform_power_source
│   │   ├── power_sampling_period

For example representing AC/adapter properties as a power_supply
properties will not make sense for a battery device. In some case
when there is an existing property, the meaning is different.
For example charger_type has a equivalent power_supply property,
which has different symantics than INT3407.

ACPI methods description used in this driver:
PSOC: Platform Battery State Of Charge as a percentage.
PMAX: Maximum platform power that can be supported by the battery in mW.
PSRC: System charge source,
	0x00 = DC
	0x01 = AC
	0x02 = USB
	0x03 = Wireless Charger
ARTG: Adapter rating in mW (Maximum Adapter power) Must be 0 if no AC
	Adaptor is plugged in.
CTYP: Charger Type,
	Traditional : 0x01
	Hybrid: 0x02
	NVDC: 0x03
PBSS: Returns max sustained power for battery in milliWatts.
DPSP: Sets the polling interval in 10ths of seconds. A value of 0 tells
	the driver to use event notification for PMAX and PBSS

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
---
 drivers/acpi/Kconfig      |  17 +++++
 drivers/acpi/Makefile     |   1 +
 drivers/acpi/dptf_power.c | 184 ++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 202 insertions(+)
 create mode 100644 drivers/acpi/dptf_power.c

diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index 27ae351..03a34b4 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -526,4 +526,21 @@ config XPOWER_PMIC_OPREGION
 
 endif
 
+config DPTF_POWER
+	tristate "DPTF Platform Power Participant"
+	depends on X86
+	select ACPI_BATTERY_COMMON
+	select POWER_SUPPLY
+	default y
+	help
+	  This driver adds support for Dynamic Platform and Thermal Framework
+	  (DPTF) Platform Power Participant device support.
+	  This participant is responsible for exposing platform telemetry such
+	  as platform Power, battery Information such as state of Charge,
+	  estimated maximum sustainable power (PMax), SMART battery spec
+	  information.
+
+	  To compile this driver as a module, choose M here:
+	  the module will be called dptf_power.
+
 endif	# ACPI
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 950bf8e..1c76715 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -75,6 +75,7 @@ obj-$(CONFIG_ACPI)		+= acpi_memhotplug.o
 obj-$(CONFIG_ACPI_HOTPLUG_IOAPIC) += ioapic.o
 obj-$(CONFIG_ACPI_BATTERY_COMMON) += battery_common.o
 obj-$(CONFIG_ACPI_BATTERY)	+= battery.o
+obj-$(CONFIG_DPTF_POWER)	+= dptf_power.o
 obj-$(CONFIG_ACPI_SBS)		+= sbshc.o
 obj-$(CONFIG_ACPI_SBS)		+= sbs.o
 obj-$(CONFIG_ACPI_HED)		+= hed.o
diff --git a/drivers/acpi/dptf_power.c b/drivers/acpi/dptf_power.c
new file mode 100644
index 0000000..013b7f3
--- /dev/null
+++ b/drivers/acpi/dptf_power.c
@@ -0,0 +1,184 @@
+/*
+ * dptf_power:  DPTF platform power driver
+ * Copyright (c) 2016, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/platform_device.h>
+#include "battery.h"
+
+#define DPTF_POWER_SHOW(name, object) \
+static ssize_t name##_show(struct device *dev,\
+			   struct device_attribute *attr,\
+			   char *buf)\
+{\
+	struct acpi_device *acpi_dev = to_acpi_device(dev);\
+	unsigned long long val;\
+	acpi_status status;\
+\
+	status = acpi_evaluate_integer(acpi_dev->handle, #object,\
+				       NULL, &val);\
+	if (ACPI_SUCCESS(status))\
+		return sprintf(buf, "%llu\n", val);\
+	else\
+		return -EINVAL;\
+}
+
+DPTF_POWER_SHOW(max_platform_power, PMAX)
+DPTF_POWER_SHOW(platform_power_source, PSRC)
+DPTF_POWER_SHOW(adapter_rating, ARTG)
+DPTF_POWER_SHOW(charger_type, CTYP)
+DPTF_POWER_SHOW(battery_steady_power, PBSS)
+DPTF_POWER_SHOW(power_sampling_period, DPSP)
+
+
+static DEVICE_ATTR_RO(max_platform_power);
+static DEVICE_ATTR_RO(platform_power_source);
+static DEVICE_ATTR_RO(adapter_rating);
+static DEVICE_ATTR_RO(battery_steady_power);
+static DEVICE_ATTR_RO(power_sampling_period);
+static DEVICE_ATTR_RO(charger_type);
+
+static struct attribute *dptf_power_attrs[] = {
+	&dev_attr_max_platform_power.attr,
+	&dev_attr_platform_power_source.attr,
+	&dev_attr_adapter_rating.attr,
+	&dev_attr_charger_type.attr,
+	&dev_attr_battery_steady_power.attr,
+	&dev_attr_power_sampling_period.attr,
+	NULL
+};
+
+static struct attribute_group dptf_power_attribute_group = {
+	.attrs = dptf_power_attrs,
+	.name = "dptf_power"
+};
+
+struct platform_device *dptf_power_pdev;
+
+static void dptf_power_notify(acpi_handle handle, u32 event, void *data)
+{
+	struct acpi_device *device = data;
+
+	acpi_battery_common_notify(device, event);
+}
+
+static int dptf_power_init(struct platform_device *pdev)
+{
+	struct acpi_device *acpi_dev;
+	acpi_status status;
+	unsigned long long ptype;
+	int result;
+
+	acpi_dev = ACPI_COMPANION(&(pdev->dev));
+	if (!acpi_dev)
+		return -ENODEV;
+
+	status = acpi_evaluate_integer(acpi_dev->handle, "PTYP", NULL, &ptype);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
+
+	if (ptype != 0x11)
+		return -ENODEV;
+
+
+	result = acpi_battery_common_add(acpi_dev);
+	if (result)
+		return result;
+
+	result = sysfs_create_group(&acpi_dev->dev.kobj,
+				    &dptf_power_attribute_group);
+	if (result)
+		goto error_remove_battery;
+
+	result = acpi_install_notify_handler(acpi_dev->handle,
+					     ACPI_DEVICE_NOTIFY,
+					     dptf_power_notify,
+					     (void *)acpi_dev);
+	if (result)
+		goto error_remove_sysfs;
+
+	platform_set_drvdata(pdev, acpi_dev);
+
+	return 0;
+
+error_remove_sysfs:
+	sysfs_remove_group(&acpi_dev->dev.kobj, &dptf_power_attribute_group);
+error_remove_battery:
+	acpi_battery_common_remove(acpi_dev);
+
+	return result;
+}
+
+static void dptf_power_init_work_fn(struct work_struct *work)
+{
+	if (!battery_registered)
+		dptf_power_init(dptf_power_pdev);
+}
+
+static DECLARE_DELAYED_WORK(dptf_power_init_work, dptf_power_init_work_fn);
+
+static int dptf_power_add(struct platform_device *pdev)
+{
+	int ret = 0;
+
+#if IS_ENABLED(CONFIG_ACPI_BATTERY)
+	/* Wait for battery driver to initialize and register for 100ms */
+	dptf_power_pdev = pdev;
+	schedule_delayed_work(&dptf_power_init_work, msecs_to_jiffies(100));
+#else
+	ret = dptf_power_init(pdev);
+#endif
+	return ret;
+}
+
+static int dptf_power_remove(struct platform_device *pdev)
+{
+	struct acpi_device *acpi_dev = platform_get_drvdata(pdev);
+
+#if defined(CONFIG_ACPI_BATTERY)
+	cancel_delayed_work_sync(&dptf_power_init_work);
+#endif
+	if (!acpi_dev)
+		return 0;
+
+	acpi_remove_notify_handler(acpi_dev->handle, ACPI_DEVICE_NOTIFY,
+				   dptf_power_notify);
+	sysfs_remove_group(&acpi_dev->dev.kobj, &dptf_power_attribute_group);
+	acpi_battery_common_remove(acpi_dev);
+
+	return 0;
+}
+
+static const struct acpi_device_id int3407_device_ids[] = {
+	{"INT3407", 0},
+	{"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, int3407_device_ids);
+
+static struct platform_driver dptf_power_driver = {
+	.probe = dptf_power_add,
+	.remove = dptf_power_remove,
+	.driver = {
+		.name = "DPTF Platform Power",
+		.acpi_match_table = int3407_device_ids,
+	},
+};
+
+module_platform_driver(dptf_power_driver);
+
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("ACPI DPTF platform power driver");
-- 
2.5.0

--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2016-06-22 20:44 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-23  3:42 [PATCH v2 0/3] DPTF Platform power participant driver Srinivas Pandruvada
2016-06-23  3:42 ` [PATCH v2 1/3] acpi: battery: Split battery driver for reuse by DPTF power participant Srinivas Pandruvada
2016-06-23  3:42 ` Srinivas Pandruvada [this message]
2016-06-22 23:48   ` [PATCH v2 2/3] acpi: dptf_power: Add " Rafael J. Wysocki
2016-06-23 13:23     ` Rafael J. Wysocki
2016-06-23 14:05       ` Srinivas Pandruvada
2016-06-23  3:42 ` [PATCH v2 3/3] acpi: battery_common: battery present status for INT3407 Srinivas Pandruvada

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1466653363-7311-3-git-send-email-srinivas.pandruvada@linux.intel.com \
    --to=srinivas.pandruvada@linux.intel.com \
    --cc=linux-acpi@vger.kernel.org \
    --cc=rjw@rjwysocki.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).