From mboxrd@z Thu Jan  1 00:00:00 1970
From: "Rafael J. Wysocki" <rjw@sisk.pl>
Subject: Re: [PATCH 1/2] ACPI / PCI: don't allow PCI devices without irq to be enabled
Date: Thu, 08 Aug 2013 15:57:06 +0200
Message-ID: <14983102.aCV009CSMA@vostro.rjw.lan>
References: <1375965314-24232-1-git-send-email-heikki.krogerus@linux.intel.com> <1375965314-24232-2-git-send-email-heikki.krogerus@linux.intel.com>
Mime-Version: 1.0
Content-Type: text/plain; charset="utf-8"
Content-Transfer-Encoding: 7Bit
Return-path: <linux-pci-owner@vger.kernel.org>
In-Reply-To: <1375965314-24232-2-git-send-email-heikki.krogerus@linux.intel.com>
Sender: linux-pci-owner@vger.kernel.org
To: Heikki Krogerus <heikki.krogerus@linux.intel.com>, Bjorn Helgaas <bhelgaas@google.com>
Cc: Prarit Bhargava <prarit@redhat.com>, linux-acpi@vger.kernel.org, Linux PCI <linux-pci@vger.kernel.org>
List-Id: linux-acpi@vger.kernel.org

On Thursday, August 08, 2013 03:35:13 PM Heikki Krogerus wrote:
> If there is no ACPI entry for the irq, returning error from
> acpi_pci_enable_irq() if the irq is 0.
> 
> Prarit Bhargava reported an issue where he noticed that his
> Dell PowerEdge 840 has buggy BIOS that does not supply ACPI
> entries for irq with some devices. That lead into kernel
> generating a warning "genirq: Flags mismatch irq 0...". This
> will fix that issue.
> 
> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> Tested-by: Prarit Bhargava <prarit@redhat.com>

Hi Bjorn,

Any objections to this?

Rafael


> ---
>  drivers/acpi/pci_irq.c | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
> index 41c5e1b..902ed1c 100644
> --- a/drivers/acpi/pci_irq.c
> +++ b/drivers/acpi/pci_irq.c
> @@ -419,8 +419,16 @@ int acpi_pci_irq_enable(struct pci_dev *dev)
>  	 */
>  	if (gsi < 0) {
>  		u32 dev_gsi;
> +
> +		/* Not accepting 0 as valid PCI IRQ. */
> +		if (!dev->irq) {
> +			dev_err(&dev->dev, "PCI INT %c: no IRQ\n",
> +				pin_name(pin));
> +			return -ENOENT;
> +		}
> +
>  		/* Interrupt Line values above 0xF are forbidden */
> -		if (dev->irq > 0 && (dev->irq <= 0xF) &&
> +		if ((dev->irq <= 0xF) &&
>  		    (acpi_isa_irq_to_gsi(dev->irq, &dev_gsi) == 0)) {
>  			dev_warn(&dev->dev, "PCI INT %c: no GSI - using ISA IRQ %d\n",
>  				 pin_name(pin), dev->irq);
> 
-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.