Re: [PATCH v4 0/6] BTT error clearing rework

["Kani, Toshimitsu" <toshi.kani@hpe.com>]

On Tue, 2017-08-01 at 09:19 -0600, Toshi Kani wrote:
> On Mon, 2017-07-31 at 23:35 +0000, Verma, Vishal L wrote:
> > On Mon, 2017-07-31 at 23:15 +0000, Kani, Toshimitsu wrote:
> > > On Wed, 2017-07-26 at 17:35 -0600, Vishal Verma wrote:
 :
> > Thanks for the test Toshi, I will try and reproduce it.
> > My first guess is - are the injected errors potentially in the BTT
> > metadata area towards the end?
> > 
> > ->rw_bytes can only clear errors on properly aligned writes, and
> > the btt metadata writes will be too small to clear metadata
> > errors..
> 
> I picked an injected offset without careful thoughts, so it is
> possible that I might have stepped into such area.  I just tested
> with a block device interface with multiple different offsets, and
> they failed in clearing as well...  I will look into further as well
> as my test setup.

The change/hack below takes care of the issue in my setup.  There is a
discrepancy in offset between the pre-check in btt_write_pg() and the
actual check in nsio_rw_bytes().

Thanks,
-Toshi

---
 drivers/nvdimm/btt.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/nvdimm/btt.c b/drivers/nvdimm/btt.c
index 8a959f8..83ad4c6 100644
--- a/drivers/nvdimm/btt.c
+++ b/drivers/nvdimm/btt.c
@@ -1137,7 +1137,7 @@ static bool btt_is_badblock(struct btt *btt,
struct arena_info *arena,
                u32 postmap)
 {
        u64 nsoff = to_namespace_offset(arena, postmap);
-       sector_t phys_sector = nsoff >> 9;
+       sector_t phys_sector = (nsoff + arena->nd_btt->initial_offset)
>> 9;

        return is_bad_pmem(btt->phys_bb, phys_sector, arena-
>internal_lbasize);
 }