From: Hanjun Guo <guohanjun@huawei.com>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: linux-acpi@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linuxarm@huawei.com, Sinan Kaya <okaya@codeaurora.org>,
"Rafael J. Wysocki" <rafael@kernel.org>,
Marc Zyngier <marc.zyngier@arm.com>,
Hanjun Guo <hanjun.guo@linaro.org>
Subject: [RFC PATCH 4/4] ACPI: IORT: Add SMMUv3 MSI support
Date: Wed, 9 Aug 2017 18:53:37 +0800 [thread overview]
Message-ID: <1502276017-63108-5-git-send-email-guohanjun@huawei.com> (raw)
In-Reply-To: <1502276017-63108-1-git-send-email-guohanjun@huawei.com>
From: Hanjun Guo <hanjun.guo@linaro.org>
Since we have a mapping index for SMMUv3 MSI, we can
directly use that index to get the map entry, then
retrieve dev ID and ITS parent to add SMMUv3 MSI
support.
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
---
drivers/acpi/arm64/iort.c | 46 ++++++++++++++++++++++++++++++++++++----------
1 file changed, 36 insertions(+), 10 deletions(-)
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c
index 9439f02..ce03298 100644
--- a/drivers/acpi/arm64/iort.c
+++ b/drivers/acpi/arm64/iort.c
@@ -313,7 +313,8 @@ static int iort_id_map(struct acpi_iort_id_mapping *map, u8 type, u32 rid_in,
/* Single mapping does not care for input id */
if (map->flags & ACPI_IORT_ID_SINGLE_MAPPING) {
if (type == ACPI_IORT_NODE_NAMED_COMPONENT ||
- type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) {
+ type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX ||
+ type == ACPI_IORT_NODE_SMMU_V3) {
*rid_out = map->output_base;
return 0;
}
@@ -357,7 +358,8 @@ struct acpi_iort_node *iort_node_get_id(struct acpi_iort_node *node,
if (map->flags & ACPI_IORT_ID_SINGLE_MAPPING) {
if (node->type == ACPI_IORT_NODE_NAMED_COMPONENT ||
- node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX) {
+ node->type == ACPI_IORT_NODE_PCI_ROOT_COMPLEX ||
+ node->type == ACPI_IORT_NODE_SMMU_V3) {
*id_out = map->output_base;
return parent;
}
@@ -549,9 +551,21 @@ int iort_pmsi_get_dev_id(struct device *dev, u32 *dev_id)
if (!node)
return -ENODEV;
- for (i = 0; i < node->mapping_count; i++) {
- if (iort_node_map_platform_id(node, dev_id, IORT_MSI_TYPE, i))
+ if (node->type == ACPI_IORT_NODE_SMMU_V3) {
+ u32 index;
+
+ if (iort_get_smmu_v3_id_mapping_index(node, &index))
+ return -ENODEV;
+
+ if (iort_node_map_platform_id(node, dev_id, IORT_MSI_TYPE,
+ index))
return 0;
+ } else {
+ for (i = 0; i < node->mapping_count; i++) {
+ if (iort_node_map_platform_id(node, dev_id,
+ IORT_MSI_TYPE, i))
+ return 0;
+ }
}
return -ENODEV;
@@ -626,20 +640,30 @@ static struct irq_domain *iort_get_platform_device_domain(struct device *dev)
struct acpi_iort_node *node, *msi_parent;
struct fwnode_handle *iort_fwnode;
struct acpi_iort_its_group *its;
- int i;
/* find its associated iort node */
- node = iort_scan_node(ACPI_IORT_NODE_NAMED_COMPONENT,
- iort_match_node_callback, dev);
+ node = iort_find_dev_node(dev);
if (!node)
return NULL;
/* then find its msi parent node */
- for (i = 0; i < node->mapping_count; i++) {
+ if (node->type == ACPI_IORT_NODE_SMMU_V3) {
+ u32 index;
+
+ if (iort_get_smmu_v3_id_mapping_index(node, &index))
+ return NULL;
+
msi_parent = iort_node_map_platform_id(node, NULL,
+ IORT_MSI_TYPE, index);
+ } else {
+ int i;
+
+ for (i = 0; i < node->mapping_count; i++) {
+ msi_parent = iort_node_map_platform_id(node, NULL,
IORT_MSI_TYPE, i);
- if (msi_parent)
- break;
+ if (msi_parent)
+ break;
+ }
}
if (!msi_parent)
@@ -1233,6 +1257,8 @@ static int __init iort_add_smmu_platform_device(struct acpi_iort_node *node)
/* Configure DMA for the page table walker */
acpi_dma_configure(&pdev->dev, attr);
+ acpi_configure_pmsi_domain(&pdev->dev);
+
ret = platform_device_add(pdev);
if (ret)
goto dma_deconfigure;
--
1.7.12.4
next prev parent reply other threads:[~2017-08-09 11:04 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-08-09 10:53 [RFC PATCH 0/4] SMMUv3 MSI support Hanjun Guo
2017-08-09 10:53 ` [RFC PATCH 1/4] ACPICA: Add SMMUv3 device ID mapping index support Hanjun Guo
2017-08-09 10:53 ` [RFC PATCH 2/4] ACPI: IORT: lookup iort node via fwnode Hanjun Guo
2017-08-09 10:53 ` [RFC PATCH 3/4] ACPI: IORT: Skip SMMUv3 device ID map for two steps mappings Hanjun Guo
2017-08-09 11:50 ` Robin Murphy
2017-08-09 14:48 ` Hanjun Guo
2017-08-09 17:12 ` Lorenzo Pieralisi
2017-08-10 9:41 ` Hanjun Guo
2017-08-15 17:13 ` Lorenzo Pieralisi
2017-08-09 10:53 ` Hanjun Guo [this message]
2017-08-11 9:33 ` [RFC PATCH 4/4] ACPI: IORT: Add SMMUv3 MSI support Lorenzo Pieralisi
2017-08-11 13:56 ` Hanjun Guo
2017-08-15 17:15 ` Lorenzo Pieralisi
2017-08-17 7:49 ` Hanjun Guo
2017-08-17 13:01 ` Lorenzo Pieralisi
2017-09-12 3:27 ` Hanjun Guo
2017-09-12 15:51 ` Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1502276017-63108-5-git-send-email-guohanjun@huawei.com \
--to=guohanjun@huawei.com \
--cc=hanjun.guo@linaro.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linuxarm@huawei.com \
--cc=lorenzo.pieralisi@arm.com \
--cc=marc.zyngier@arm.com \
--cc=okaya@codeaurora.org \
--cc=rafael@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox