Re: [PATCH v4 3/4] dt-bindings: Add post-init-providers property

[Rob Herring <robh@kernel.org>]

On Wed, 21 Feb 2024 19:46:21 -0800, Saravana Kannan wrote:
> The post-init-providers property can be used to break a dependency cycle by
> marking some provider(s) as a post device initialization provider(s). This
> allows an OS to do a better job at ordering initialization and
> suspend/resume of the devices in a dependency cycle.
> 
> Signed-off-by: Saravana Kannan <saravanak@google.com>
> ---
>  .../bindings/post-init-providers.yaml         | 105 ++++++++++++++++++
>  MAINTAINERS                                   |  13 ++-
>  2 files changed, 112 insertions(+), 6 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/post-init-providers.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/post-init-providers.example.dtb: /example-0/clock-controller@1000: failed to match any schema with compatible: ['vendor,soc4-gcc', 'vendor,soc1-gcc']
Documentation/devicetree/bindings/post-init-providers.example.dtb: /example-0/clock-controller@1000: failed to match any schema with compatible: ['vendor,soc4-gcc', 'vendor,soc1-gcc']
Documentation/devicetree/bindings/post-init-providers.example.dtb: /example-0/clock-controller@2000: failed to match any schema with compatible: ['vendor,soc4-dispcc', 'vendor,soc1-dispcc']
Documentation/devicetree/bindings/post-init-providers.example.dtb: /example-0/clock-controller@2000: failed to match any schema with compatible: ['vendor,soc4-dispcc', 'vendor,soc1-dispcc']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240222034624.2970024-4-saravanak@google.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.