From: "Rafael J. Wysocki" <rjw-LthD3rsA81gm4RdzfppkhA@public.gmane.org>
To: fu.wei-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org
Cc: lenb-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org,
marc.zyngier-5wv7dgnIgG8@public.gmane.org,
lorenzo.pieralisi-5wv7dgnIgG8@public.gmane.org,
sudeep.holla-5wv7dgnIgG8@public.gmane.org,
hanjun.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linaro-acpi-cunTk1MwBs8s++Sfvej+rw@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-acpi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
rruigrok-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
harba-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
cov-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
timur-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
graeme.gregory-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
al.stone-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
jcm-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org,
wei-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org,
arnd-r2nGTMty4D4@public.gmane.org,
wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org,
catalin.marinas-5wv7dgnIgG8@public.gmane.org,
will.deacon-5wv7dgnIgG8@public.gmane.org,
Suravee.Suthikulpanit-5C7GfCeVMHo@public.gmane.org,
leo.duran-5C7GfCeVMHo@public.gmane.org,
linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org,
linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: [PATCH v9 5/9] acpi/arm64: Add GTDT table parse driver
Date: Tue, 26 Jul 2016 13:50:39 +0200 [thread overview]
Message-ID: <1754781.CC9jSrYt2s@vostro.rjw.lan> (raw)
In-Reply-To: <1469460427-8643-6-git-send-email-fu.wei-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
On Monday, July 25, 2016 11:27:03 PM fu.wei-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org wrote:
> From: Fu Wei <fu.wei-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>
> This patch adds support for parsing arch timer in GTDT,
> provides some kernel APIs to parse all the PPIs and
> always-on info in GTDT and export them.
>
> By this driver, we can simplify arm_arch_timer drivers, and
> separate the ACPI GTDT knowledge from it.
>
> Signed-off-by: Fu Wei <fu.wei-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Signed-off-by: Hanjun Guo <hanjun.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>From the ACPI perspective:
Acked-by: Rafael J. Wysocki <rafael.j.wysocki-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
and I'm assuming that the patches will go in via some other (non-ACPI) tree.
> ---
> arch/arm64/Kconfig | 1 +
> drivers/acpi/Kconfig | 5 ++
> drivers/acpi/Makefile | 1 +
> drivers/acpi/arm64/Kconfig | 5 ++
> drivers/acpi/arm64/Makefile | 1 +
> drivers/acpi/arm64/acpi_gtdt.c | 152 +++++++++++++++++++++++++++++++++++++++++
> drivers/clocksource/Kconfig | 1 -
> include/linux/acpi.h | 6 ++
> 8 files changed, 171 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> index 5a0a691..0b9fba7 100644
> --- a/arch/arm64/Kconfig
> +++ b/arch/arm64/Kconfig
> @@ -2,6 +2,7 @@ config ARM64
> def_bool y
> select ACPI_CCA_REQUIRED if ACPI
> select ACPI_GENERIC_GSI if ACPI
> + select ACPI_GTDT if ACPI
> select ACPI_REDUCED_HARDWARE_ONLY if ACPI
> select ARCH_HAS_DEVMEM_IS_ALLOWED
> select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
> diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
> index b7e2e77..1cdc7d2 100644
> --- a/drivers/acpi/Kconfig
> +++ b/drivers/acpi/Kconfig
> @@ -521,4 +521,9 @@ config XPOWER_PMIC_OPREGION
>
> endif
>
> +if ARM64
> +source "drivers/acpi/arm64/Kconfig"
> +
> +endif
> +
> endif # ACPI
> diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
> index 251ce85..1a94ff7 100644
> --- a/drivers/acpi/Makefile
> +++ b/drivers/acpi/Makefile
> @@ -99,5 +99,6 @@ obj-$(CONFIG_ACPI_EXTLOG) += acpi_extlog.o
> obj-$(CONFIG_PMIC_OPREGION) += pmic/intel_pmic.o
> obj-$(CONFIG_CRC_PMIC_OPREGION) += pmic/intel_pmic_crc.o
> obj-$(CONFIG_XPOWER_PMIC_OPREGION) += pmic/intel_pmic_xpower.o
> +obj-$(CONFIG_ARM64) += arm64/
>
> video-objs += acpi_video.o video_detect.o
> diff --git a/drivers/acpi/arm64/Kconfig b/drivers/acpi/arm64/Kconfig
> new file mode 100644
> index 0000000..80201be
> --- /dev/null
> +++ b/drivers/acpi/arm64/Kconfig
> @@ -0,0 +1,5 @@
> +#
> +# ACPI Configuration for ARM64
> +#
> +config ACPI_GTDT
> + bool
> diff --git a/drivers/acpi/arm64/Makefile b/drivers/acpi/arm64/Makefile
> new file mode 100644
> index 0000000..466de6b
> --- /dev/null
> +++ b/drivers/acpi/arm64/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_ACPI_GTDT) += acpi_gtdt.o
> diff --git a/drivers/acpi/arm64/acpi_gtdt.c b/drivers/acpi/arm64/acpi_gtdt.c
> new file mode 100644
> index 0000000..cdb2fb1
> --- /dev/null
> +++ b/drivers/acpi/arm64/acpi_gtdt.c
> @@ -0,0 +1,152 @@
> +/*
> + * ARM Specific GTDT table Support
> + *
> + * Copyright (C) 2016, Linaro Ltd.
> + * Author: Daniel Lezcano <daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> + * Fu Wei <fu.wei-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> + * Hanjun Guo <hanjun.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +
> +#include <clocksource/arm_arch_timer.h>
> +
> +#undef pr_fmt
> +#define pr_fmt(fmt) "ACPI GTDT: " fmt
> +
> +typedef struct {
> + struct acpi_table_gtdt *gtdt;
> + void *platform_timer_start;
> + void *gtdt_end;
> +} acpi_gtdt_desc_t;
> +
> +static acpi_gtdt_desc_t acpi_gtdt_desc __initdata;
> +
> +static inline void *next_platform_timer(void *platform_timer)
> +{
> + struct acpi_gtdt_header *gh = platform_timer;
> +
> + platform_timer += gh->length;
> + if (platform_timer < acpi_gtdt_desc.gtdt_end)
> + return platform_timer;
> +
> + return NULL;
> +}
> +
> +#define for_each_platform_timer(_g) \
> + for (_g = acpi_gtdt_desc.platform_timer_start; _g; \
> + _g = next_platform_timer(_g))
> +
> +static inline bool is_timer_block(void *platform_timer)
> +{
> + struct acpi_gtdt_header *gh = platform_timer;
> +
> + return gh->type == ACPI_GTDT_TYPE_TIMER_BLOCK;
> +}
> +
> +static inline bool is_watchdog(void *platform_timer)
> +{
> + struct acpi_gtdt_header *gh = platform_timer;
> +
> + return gh->type == ACPI_GTDT_TYPE_WATCHDOG;
> +}
> +
> +static int __init map_gt_gsi(u32 interrupt, u32 flags)
> +{
> + int trigger, polarity;
> +
> + if (!interrupt)
> + return 0;
> +
> + trigger = (flags & ACPI_GTDT_INTERRUPT_MODE) ? ACPI_EDGE_SENSITIVE
> + : ACPI_LEVEL_SENSITIVE;
> +
> + polarity = (flags & ACPI_GTDT_INTERRUPT_POLARITY) ? ACPI_ACTIVE_LOW
> + : ACPI_ACTIVE_HIGH;
> +
> + return acpi_register_gsi(NULL, interrupt, trigger, polarity);
> +}
> +
> +/*
> + * Map the PPIs of per-cpu arch_timer.
> + * @type: the type of PPI
> + * Returns 0 if error.
> + */
> +int __init acpi_gtdt_map_ppi(int type)
> +{
> + struct acpi_table_gtdt *gtdt = acpi_gtdt_desc.gtdt;
> +
> + switch (type) {
> + case PHYS_SECURE_PPI:
> + return map_gt_gsi(gtdt->secure_el1_interrupt,
> + gtdt->secure_el1_flags);
> + case PHYS_NONSECURE_PPI:
> + return map_gt_gsi(gtdt->non_secure_el1_interrupt,
> + gtdt->non_secure_el1_flags);
> + case VIRT_PPI:
> + return map_gt_gsi(gtdt->virtual_timer_interrupt,
> + gtdt->virtual_timer_flags);
> +
> + case HYP_PPI:
> + return map_gt_gsi(gtdt->non_secure_el2_interrupt,
> + gtdt->non_secure_el2_flags);
> + default:
> + pr_err("Failed to map timer interrupt: invalid type.\n");
> + }
> +
> + return 0;
> +}
> +
> +/*
> + * acpi_gtdt_c3stop - got c3stop info from GTDT
> + *
> + * Returns 1 if the timer is powered in deep idle state, 0 otherwise.
> + */
> +bool __init acpi_gtdt_c3stop(void)
> +{
> + struct acpi_table_gtdt *gtdt = acpi_gtdt_desc.gtdt;
> +
> + return !(gtdt->non_secure_el1_flags & ACPI_GTDT_ALWAYS_ON);
> +}
> +
> +/*
> + * Get some basic info from GTDT table, and init the global variables above
> + * for all timers initialization of Generic Timer.
> + * This function does some validation on GTDT table.
> + */
> +int __init acpi_gtdt_init(struct acpi_table_header *table)
> +{
> + void *start;
> + struct acpi_table_gtdt *gtdt;
> +
> + gtdt = container_of(table, struct acpi_table_gtdt, header);
> +
> + acpi_gtdt_desc.gtdt = gtdt;
> + acpi_gtdt_desc.gtdt_end = (void *)table + table->length;
> +
> + if (table->revision < 2) {
> + pr_debug("Revision:%d doesn't support Platform Timers.\n",
> + table->revision);
> + return 0;
> + }
> +
> + if (!gtdt->platform_timer_count) {
> + pr_debug("No Platform Timer.\n");
> + return 0;
> + }
> +
> + start = (void *)gtdt + gtdt->platform_timer_offset;
> + if (start < (void *)table + sizeof(struct acpi_table_gtdt)) {
> + pr_err(FW_BUG "Failed to retrieve timer info from firmware: invalid data.\n");
> + return -EINVAL;
> + }
> + acpi_gtdt_desc.platform_timer_start = start;
> +
> + return gtdt->platform_timer_count;
> +}
> diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
> index 47352d2..108dbc3 100644
> --- a/drivers/clocksource/Kconfig
> +++ b/drivers/clocksource/Kconfig
> @@ -205,7 +205,6 @@ config CLKSRC_MPS2
> config ARM_ARCH_TIMER
> bool
> select CLKSRC_OF if OF
> - select CLKSRC_ACPI if ACPI
>
> config ARM_ARCH_TIMER_EVTSTREAM
> bool "Support for ARM architected timer event stream generation"
> diff --git a/include/linux/acpi.h b/include/linux/acpi.h
> index 288fac5..fb8b689 100644
> --- a/include/linux/acpi.h
> +++ b/include/linux/acpi.h
> @@ -532,6 +532,12 @@ void acpi_walk_dep_device_list(acpi_handle handle);
> struct platform_device *acpi_create_platform_device(struct acpi_device *);
> #define ACPI_PTR(_ptr) (_ptr)
>
> +#ifdef CONFIG_ACPI_GTDT
> +int acpi_gtdt_init(struct acpi_table_header *table);
> +int acpi_gtdt_map_ppi(int type);
> +bool acpi_gtdt_c3stop(void);
> +#endif
> +
> #else /* !CONFIG_ACPI */
>
> #define acpi_disabled 1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-07-26 11:50 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-07-25 15:26 [PATCH v9 0/9] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer fu.wei
2016-07-25 15:27 ` [PATCH v9 2/9] clocksource/drivers/arm_arch_timer: Add a new enum for spi type fu.wei
2016-07-25 15:27 ` [PATCH v9 4/9] clocksource/drivers/arm_arch_timer: use readq to get 64-bit CNTVCT fu.wei
2016-07-25 15:31 ` Will Deacon
[not found] ` <20160725153118.GD19209-5wv7dgnIgG8@public.gmane.org>
2016-07-25 15:50 ` Timur Tabi
2016-07-25 15:55 ` Fu Wei
[not found] ` <CADyBb7ubKceQiB7+u7sSA=1+9_VMUrGjiabf_FkN2-n4rq7Kgg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2016-07-25 16:31 ` Will Deacon
[not found] ` <20160725163144.GE19209-5wv7dgnIgG8@public.gmane.org>
2016-07-25 22:49 ` Russell King - ARM Linux
2016-07-26 9:21 ` Fu Wei
2016-07-26 14:11 ` Timur Tabi
2016-07-27 3:33 ` Jisheng Zhang
2016-07-27 4:19 ` Fu Wei
2016-07-28 13:53 ` Will Deacon
[not found] ` <1469460427-8643-1-git-send-email-fu.wei-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-07-25 15:26 ` [PATCH v9 1/9] clocksource/drivers/arm_arch_timer: Move enums and defines to header file fu.wei-QSEj5FYQhm4dnm+yROfE0A
2016-07-25 15:27 ` [PATCH v9 3/9] clocksource/drivers/arm_arch_timer: Improve printk relevant code fu.wei-QSEj5FYQhm4dnm+yROfE0A
2016-07-25 15:27 ` [PATCH v9 5/9] acpi/arm64: Add GTDT table parse driver fu.wei-QSEj5FYQhm4dnm+yROfE0A
[not found] ` <1469460427-8643-6-git-send-email-fu.wei-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2016-07-26 11:50 ` Rafael J. Wysocki [this message]
[not found] ` <1754781.CC9jSrYt2s-sKB8Sp2ER+y1GS7QM15AGw@public.gmane.org>
2016-07-26 12:40 ` Fu Wei
2016-07-25 15:27 ` [PATCH v9 6/9] clocksource/drivers/arm_arch_timer: Simplify ACPI support code fu.wei-QSEj5FYQhm4dnm+yROfE0A
2016-07-25 15:27 ` [PATCH v9 7/9] acpi/arm64: Add memory-mapped timer support in GTDT driver fu.wei-QSEj5FYQhm4dnm+yROfE0A
2016-07-25 15:27 ` [PATCH v9 8/9] clocksource/drivers/arm_arch_timer: Add GTDT support for memory-mapped timer fu.wei-QSEj5FYQhm4dnm+yROfE0A
2016-07-25 15:27 ` [PATCH v9 9/9] acpi/arm64: Add SBSA Generic Watchdog support in GTDT driver fu.wei-QSEj5FYQhm4dnm+yROfE0A
2016-08-09 11:03 ` [PATCH v9 0/9] acpi, clocksource: add GTDT driver and GTDT support in arm_arch_timer Tomasz Nowicki
[not found] ` <7c11cca2-1eaa-a4fb-a44b-cdb36ea99ae9-nYOzD4b6Jr9Wk0Htik3J/w@public.gmane.org>
2016-08-09 18:12 ` Fu Wei
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1754781.CC9jSrYt2s@vostro.rjw.lan \
--to=rjw-lthd3rsa81gm4rdzfppkha@public.gmane.org \
--cc=Suravee.Suthikulpanit-5C7GfCeVMHo@public.gmane.org \
--cc=al.stone-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=catalin.marinas-5wv7dgnIgG8@public.gmane.org \
--cc=cov-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=daniel.lezcano-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=fu.wei-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=graeme.gregory-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=hanjun.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=harba-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=jcm-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=lenb-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=leo.duran-5C7GfCeVMHo@public.gmane.org \
--cc=linaro-acpi-cunTk1MwBs8s++Sfvej+rw@public.gmane.org \
--cc=linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org \
--cc=linux-acpi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=lorenzo.pieralisi-5wv7dgnIgG8@public.gmane.org \
--cc=marc.zyngier-5wv7dgnIgG8@public.gmane.org \
--cc=rruigrok-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=sudeep.holla-5wv7dgnIgG8@public.gmane.org \
--cc=tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org \
--cc=timur-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=wei-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org \
--cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
--cc=wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox