From: "John Stoffel" <john@stoffel.org>
To: Andrew Morton <akpm@osdl.org>
Cc: Miles Lane <miles.lane@gmail.com>,
LKML <linux-kernel@vger.kernel.org>,
linux-acpi@vger.kernel.org, "Brown, Len" <len.brown@intel.com>
Subject: Re: 2.6.18-rc4-mm3 -- ACPI Error (utglobal-0125): Unknown exception code: 0xFFFFFFEA [20060707]
Date: Sun, 27 Aug 2006 11:27:16 -0400 [thread overview]
Message-ID: <17649.47572.627874.371564@stoffel.org> (raw)
In-Reply-To: <20060827001437.ec4f7a7a.akpm@osdl.org>
>>>>> "Andrew" == Andrew Morton <akpm@osdl.org> writes:
Andrew> On Sat, 26 Aug 2006 23:56:09 -0700
Andrew> "Miles Lane" <miles.lane@gmail.com> wrote:
>> PCI: Using ACPI for IRQ routing
>> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
>> ACPI Error (utglobal-0125): Unknown exception code: 0xFFFFFFEA [20060707]
>> [dump_trace+100/418] dump_trace+0x64/0x1a2
>> [show_trace_log_lvl+18/37] show_trace_log_lvl+0x12/0x25
>> [show_trace+13/16] show_trace+0xd/0x10
>> [dump_stack+23/25] dump_stack+0x17/0x19
>> [acpi_format_exception+162/175] acpi_format_exception+0xa2/0xaf
>> [acpi_ut_status_exit+43/88] acpi_ut_status_exit+0x2b/0x58
>> [acpi_walk_resources+269/281] acpi_walk_resources+0x10d/0x119
>> [acpi_motherboard_add+34/52] acpi_motherboard_add+0x22/0x34
>> [acpi_bus_driver_init+42/122] acpi_bus_driver_init+0x2a/0x7a
>> [acpi_bus_register_driver+137/248] acpi_bus_register_driver+0x89/0xf8
>> [acpi_motherboard_init+23/249] acpi_motherboard_init+0x17/0xf9
>> [init+136/512] init+0x88/0x200
>> [kernel_thread_helper+7/16] kernel_thread_helper+0x7/0x10
>> DWARF2 unwinder stuck at kernel_thread_helper+0x7/0x10
>>
>> Leftover inexact backtrace:
>>
>> [show_trace_log_lvl+18/37] show_trace_log_lvl+0x12/0x25
>> [show_trace+13/16] show_trace+0xd/0x10
>> [dump_stack+23/25] dump_stack+0x17/0x19
>> [acpi_format_exception+162/175] acpi_format_exception+0xa2/0xaf
>> [acpi_ut_status_exit+43/88] acpi_ut_status_exit+0x2b/0x58
>> [acpi_walk_resources+269/281] acpi_walk_resources+0x10d/0x119
>> [acpi_motherboard_add+34/52] acpi_motherboard_add+0x22/0x34
>> [acpi_bus_driver_init+42/122] acpi_bus_driver_init+0x2a/0x7a
>> [acpi_bus_register_driver+137/248] acpi_bus_register_driver+0x89/0xf8
>> [acpi_motherboard_init+23/249] acpi_motherboard_init+0x17/0xf9
>> [init+136/512] init+0x88/0x200
>> [kernel_thread_helper+7/16] kernel_thread_helper+0x7/0x10
>> =======================
Andrew> cc's added.
Thanks Andrew. I just tried doing this with 2.6.18-rc4-mm3 and it
hung again. I also tried booting with irqpoll and pci=routeirq but it
made no difference at all. I got the following with irqpoll:
irq 17: nobody cared (try booting with the "irqpoll" option)
[<c013e834>] __report_bad_irq+0x24/0x90
[<c013eab8>] note_interrupt+0x218/0x250
[<c013dd43>] handle_IRQ_event+0x33/0x70
[<c013f3ea>] handle_fasteoi_irq+0xca/0xe0
[<c013f320>] handle_fasteoi_irq+0x0/0xe0
[<c01059dd>] do_IRQ+0x8d/0xf0
[<c0554250>] unknown_bootoption+0x0/0x270
[<c01039da>] common_interrupt+0x1a/0x20
[<c0101c40>] default_idle+0x0/0x60
[<c0554250>] unknown_bootoption+0x0/0x270
[<c0101c71>] default_idle+0x31/0x60
[<c0101d0c>] cpu_idle+0x6c/0x90
[<c05547b9>] start_kernel+0x2f9/0x400
[<c0554250>] unknown_bootoption+0x0/0x270
=======================
handlers:
[<c0303890>] (ata_interrupt+0x0/0x190)
[<c03115b0>] (usb_hcd_irq+0x0/0x60)
Disabling IRQ #17
I'm going to try and upgrade the firmware on my RocketPort 133 from
1.21 to 1.22 to see if that makes a difference, but otherwise there's
not alot I can do here.
Any more information I can provide?
next prev parent reply other threads:[~2006-08-27 15:27 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <a44ae5cd0608262356j29c0234cl198fb207bcad383d@mail.gmail.com>
2006-08-27 7:14 ` 2.6.18-rc4-mm3 -- ACPI Error (utglobal-0125): Unknown exception code: 0xFFFFFFEA [20060707] Andrew Morton
2006-08-27 15:27 ` John Stoffel [this message]
2006-08-27 16:07 ` Laurent Riffard
2006-08-27 16:27 ` Miles Lane
2006-09-08 3:25 ` Miles Lane
2006-09-08 16:10 ` Bjorn Helgaas
2006-09-08 17:47 ` Andrew Morton
2006-08-28 1:44 ` John Stoffel
2006-09-08 16:09 ` Bjorn Helgaas
2006-09-08 17:54 ` John Stoffel
2006-09-09 23:47 ` John Stoffel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=17649.47572.627874.371564@stoffel.org \
--to=john@stoffel.org \
--cc=akpm@osdl.org \
--cc=len.brown@intel.com \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=miles.lane@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox